Jacinthe Gamon
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Jacinthe Gamon has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
- Alain Demourgues
University Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR 5026
4 shared publications - Emmanuel Guilmeau
CRISMAT, CNRS, Normandie Univ, ENSICAEN, UNICAEN, 14000 Caen, France
3 shared publications - Luke M. Daniels
Department of Chemistry, University of Liverpool, Crown Street, L69 7ZD Liverpool, U.K.
3 shared publications - Matthew J. Rosseinsky
Materials Innovation Factory, Department of Chemistry, University of Liverpool, 51 Oxford Street, L7 3NY, UK
3 shared publications T. Le Mercier
Solvay, Research and Innovation Center Paris, 52 rue de La Haie Coq, 93308 Aubervilliers Cedex, France
3 shared publicationsAntoine Villesuzanne
Univ. Bordeaux, CNRS, Bordeaux INP, ICMCB, UMR5026, 87 avenue du Dr. A. Schweitzer, Pessac F-33608, France
2 shared publications
Latest Publications
- 16 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (38) , 40780-40791
Tuning the Activation Barrier for Oxygen Exchange on Mixed Conducting Oxide with Fine Control of Transition Metal Impurities
The energy barrier for oxygen exchange at the surface of mixed conducting oxides is a multifactor term that remains difficult to predict with existing models. Here, we describe an experimental approach to fine-tune this barrier on Pr0.1Ce0.9O2-δ used as a model mixed conducting oxide, by adding a minute amount of transition metal impurities to its surface. The variations of the activation barrier for oxygen exchange can be readily correlated with the redox properties of the transition metal oxide, and such a barrier can be decreased by as much as a factor of 2 with more reducible oxide impurities such as Co3O4. We demonstrate that this drop does not originate from the activity of the impurity oxide itself, but rather from the modified surface chemistry of Pr0.1Ce0.9O2-δ induced by the presence of the impurity through the formation of a heterojunction between Pr0.1Ce0.9O2-δ and the transition metals that modifies the energy barrier to oxygen exchange.
- 16 September 2026
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 148 (38) , 40780-40791
Tuning the Activation Barrier for Oxygen Exchange on Mixed Conducting Oxide with Fine Control of Transition Metal Impurities
The energy barrier for oxygen exchange at the surface of mixed conducting oxides is a multifactor term that remains difficult to predict with existing models. Here, we describe an experimental approach to fine-tune this barrier on Pr0.1Ce0.9O2-δ used as a model mixed conducting oxide, by adding a minute amount of transition metal impurities to its surface. The variations of the activation barrier for oxygen exchange can be readily correlated with the redox properties of the transition metal oxide, and such a barrier can be decreased by as much as a factor of 2 with more reducible oxide impurities such as Co3O4. We demonstrate that this drop does not originate from the activity of the impurity oxide itself, but rather from the modified surface chemistry of Pr0.1Ce0.9O2-δ induced by the presence of the impurity through the formation of a heterojunction between Pr0.1Ce0.9O2-δ and the transition metals that modifies the energy barrier to oxygen exchange.
- Open Access
- 19 August 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 694
Electrochemical performance and degradation mechanisms of La3-xPrxNi2O7+δ (x = 0, 0.75, 1.5) Ruddlesden-Popper nickelates as SOEC oxygen electrodes
- 19 August 2026
- Published by Elsevier in Journal of Power Sources
- Vol. 694
Open AccessElectrochemical performance and degradation mechanisms of La3-xPrxNi2O7+δ (x = 0, 0.75, 1.5) Ruddlesden-Popper nickelates as SOEC oxygen electrodes
- 2 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Dopage et interfaces optimisés de semiconducteurs : étude de deux systèmes complémentaires BiCuOS et ZnO
Le domaine émergeant de l’électronique imprimée nécessite de nouveaux matériaux peu coûteux et non toxiques pour réaliser de nombreux systèmes tels que des circuits logiques, des capteurs, des affichages, des thermoélectriques ou même du photovoltaïque sur substrat souple. Il s’agit aussi d’optimiser le fonctionnement de couches granulaires de semiconducteurs de type n et p.BiCuOS a été identifié comme un semiconducteur de type p possédant des propriétés intéressantes. Cependant, sa forte sous stoechiométrie en cuivre induit un dopage de type p trop élevé qui nuit à ses propriétés semiconductrices. De plus, comme la plupart des composés à base de chalcogénures, BiCuOS se décompose lors d’un frittage, et ne peut être densifié thermiquement. Dans le but d’optimiser des couches minces de BiCuOS, des solutions doivent ainsi être trouvées pour i) réduire le taux de dopage ; ii) obtenir de bonnes mobilités dans des couche peu denses. De nombreuses substitutions chimiques ont été essayées telles que celle du soufre par l’iode et celle du cuivre par l’argent. Ces substitutions ont permis de réduire fortement le taux de porteurs de charge. D’autre part, nous avons étudié l’effet du greffage de molécules à la surface des grains de semiconducteurs sur la conduction électronique. Des molécules conjuguées (acides téréphtaliques substitués) et des polymères dérivés des polythiophènes ont été adsorbés à la surface d’un semiconducteur modèle de type n, ZnO. L’amélioration du transfert électronique intergranulaire a été expliquée par le saut des électrons au travers de la LUMO de ces molécules.L’élaboration d’encres de particules semiconductrices stabilisées par de telles molécules a permis la fabrication par voie liquide de jonctions diodes p-n ZnO/BiCuOS avec de bonnes performances malgré l’absence de propriétés photovoltaïques. Plus largement, ce travail est une contribution à la mise en forme de nouveaux systèmes d’électronique hybride par voie de chimie douce, dont le développement permettrait la commercialisation de technologies plus respectueuses de l’environnement.
- 2 April 2026
- Published by Agence Bibliographique de l'Enseignement Supérieur
Dopage et interfaces optimisés de semiconducteurs : étude de deux systèmes complémentaires BiCuOS et ZnO
Le domaine émergeant de l’électronique imprimée nécessite de nouveaux matériaux peu coûteux et non toxiques pour réaliser de nombreux systèmes tels que des circuits logiques, des capteurs, des affichages, des thermoélectriques ou même du photovoltaïque sur substrat souple. Il s’agit aussi d’optimiser le fonctionnement de couches granulaires de semiconducteurs de type n et p.BiCuOS a été identifié comme un semiconducteur de type p possédant des propriétés intéressantes. Cependant, sa forte sous stoechiométrie en cuivre induit un dopage de type p trop élevé qui nuit à ses propriétés semiconductrices. De plus, comme la plupart des composés à base de chalcogénures, BiCuOS se décompose lors d’un frittage, et ne peut être densifié thermiquement. Dans le but d’optimiser des couches minces de BiCuOS, des solutions doivent ainsi être trouvées pour i) réduire le taux de dopage ; ii) obtenir de bonnes mobilités dans des couche peu denses. De nombreuses substitutions chimiques ont été essayées telles que celle du soufre par l’iode et celle du cuivre par l’argent. Ces substitutions ont permis de réduire fortement le taux de porteurs de charge. D’autre part, nous avons étudié l’effet du greffage de molécules à la surface des grains de semiconducteurs sur la conduction électronique. Des molécules conjuguées (acides téréphtaliques substitués) et des polymères dérivés des polythiophènes ont été adsorbés à la surface d’un semiconducteur modèle de type n, ZnO. L’amélioration du transfert électronique intergranulaire a été expliquée par le saut des électrons au travers de la LUMO de ces molécules.L’élaboration d’encres de particules semiconductrices stabilisées par de telles molécules a permis la fabrication par voie liquide de jonctions diodes p-n ZnO/BiCuOS avec de bonnes performances malgré l’absence de propriétés photovoltaïques. Plus largement, ce travail est une contribution à la mise en forme de nouveaux systèmes d’électronique hybride par voie de chimie douce, dont le développement permettrait la commercialisation de technologies plus respectueuses de l’environnement.
- 29 January 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (6) , 3270-3285
The Key Role of Monovalent Indium and Anionic Vacancies in Oxyfluorides Inducing Fluoride Ion Mobility and Luminescence
Novel Ba2-xSrxInO3F Ruddlesden-Popper phases were synthesized by solid-state routes at high temperatures under Ar and dry air. The structural features were determined through XRD analysis of well-crystallized powders and isolated single crystals. Two In sites were identified with various occupancies, dependent on the Sr content and on the atmosphere applied during annealing. This indium site distribution leads to the consideration of an anionic disorder on the apical site in the vicinity of In. A maximum in the O2-In-O2 bond angles is identified for the Ba1.2Sr0.8InO3F composition and corresponds to a stronger hybridization between the In (s,p) and O(p) orbitals in the equatorial plane, which should be the signature of monovalent indium. 19F MAS NMR investigation recorded at various temperatures shows the F- hopping phenomenon in the mixed (Ba/Sr) environment, which is most present in the Ba1.2Sr0.8InO3F oxyfluoride and linked to the presence of anionic vacancies. Considering the electroneutrality of the composition, monovalent indium should be stabilized in octahedron with a vacant vertex. Excitation (UV range) and emission (visible range) broad bands are clearly detected, but neither excitation nor emission wavelength varies with the Sr content. However, the photoluminescence intensity is strongly correlated with the composition and reaches a maximum for the Ba1.2Sr0.8InO3F compound. Density functional theory calculations allow for the identification of defect states related to anionic vacancies in the band gap, with hybridization mainly between In(s) and O(p) orbitals in the basal plane, thus explaining the self-trapped exciton (STE) mechanism.
- 29 January 2026
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 65 (6) , 3270-3285
The Key Role of Monovalent Indium and Anionic Vacancies in Oxyfluorides Inducing Fluoride Ion Mobility and Luminescence
Novel Ba2-xSrxInO3F Ruddlesden-Popper phases were synthesized by solid-state routes at high temperatures under Ar and dry air. The structural features were determined through XRD analysis of well-crystallized powders and isolated single crystals. Two In sites were identified with various occupancies, dependent on the Sr content and on the atmosphere applied during annealing. This indium site distribution leads to the consideration of an anionic disorder on the apical site in the vicinity of In. A maximum in the O2-In-O2 bond angles is identified for the Ba1.2Sr0.8InO3F composition and corresponds to a stronger hybridization between the In (s,p) and O(p) orbitals in the equatorial plane, which should be the signature of monovalent indium. 19F MAS NMR investigation recorded at various temperatures shows the F- hopping phenomenon in the mixed (Ba/Sr) environment, which is most present in the Ba1.2Sr0.8InO3F oxyfluoride and linked to the presence of anionic vacancies. Considering the electroneutrality of the composition, monovalent indium should be stabilized in octahedron with a vacant vertex. Excitation (UV range) and emission (visible range) broad bands are clearly detected, but neither excitation nor emission wavelength varies with the Sr content. However, the photoluminescence intensity is strongly correlated with the composition and reaches a maximum for the Ba1.2Sr0.8InO3F compound. Density functional theory calculations allow for the identification of defect states related to anionic vacancies in the band gap, with hybridization mainly between In(s) and O(p) orbitals in the basal plane, thus explaining the self-trapped exciton (STE) mechanism.
- Open Access
- 21 November 2025
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (1) , 012001
Probing oxygen ion transport in solid state oxides: a technical review
The study of ion transport in solid state ionic materials underpins the fast development of many electrochemical technologies such as solid state batteries, solid oxide cells, proton conducting solid oxide fuel cells. In order to obtain the ion transport dynamics, different in situ and ex situ techniques have been developed to probe ion transport while each method has its inherent merits and weaknesses. The choice of the method for measuring ionic mass transport primarily depends upon the appropriacy and accessibility of the technique based on sample properties, targeted information of interest and technical limitations. This review introduces aspects of the underlying principles, discusses and compares different techniques available to date in the literature to obtain oxygen mass transport kinetics, primarily focussing on experimental techniques, in particular the isotope exchange depth profiling and electrical conductivity relaxation methods, together with a brief introduction on computational tools.
- 21 November 2025
- Published by IOP Publishing in Journal of Physics: Energy
- Vol. 8 (1) , 012001
Open AccessProbing oxygen ion transport in solid state oxides: a technical review
The study of ion transport in solid state ionic materials underpins the fast development of many electrochemical technologies such as solid state batteries, solid oxide cells, proton conducting solid oxide fuel cells. In order to obtain the ion transport dynamics, different in situ and ex situ techniques have been developed to probe ion transport while each method has its inherent merits and weaknesses. The choice of the method for measuring ionic mass transport primarily depends upon the appropriacy and accessibility of the technique based on sample properties, targeted information of interest and technical limitations. This review introduces aspects of the underlying principles, discusses and compares different techniques available to date in the literature to obtain oxygen mass transport kinetics, primarily focussing on experimental techniques, in particular the isotope exchange depth profiling and electrical conductivity relaxation methods, together with a brief introduction on computational tools.
- 31 March 2025
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 125 (8) , 4287-4358
Fluorine as a Key Element in Solid-State Chemistry of Mixed Anions 3d Transition Metal-Based Materials for Electronic Properties and Energy
Mixed anion compounds containing fluorine and based on 3d transition elements represent a class of materials with significant interest in solid-state chemistry. Indeed, their highly varied chemical composition, structural diversity, and the resulting electronic properties provide a rich playground for imagining new applications in the field of energy. The anions and the chemical bonds they form with the 3d transition elements are at the heart of this review. Key parameters such as electronegativity, hardness, and polarizability are introduced and discussed to better understand the charge capacity of the anion and the bonds formed in the solid. Oxyfluorides represent the most studied family due to the size similarity of the two anions, and part of the review is dedicated to the specific synthesis of these materials by systematically adjusting the fluorine content within various structures and analyzing the electronic and electrochemical properties of these compositions. The final sections focus on materials with structures often exhibiting a two-dimensional character, where ionic blocks coexist with covalent layers, such as fluorochalcogenides, fluoropnictides, and fluorotetrelides. The compositions and structures are systematically correlated with the electronic properties.
- 31 March 2025
- Published by American Chemical Society (ACS) in Chemical Reviews
- Vol. 125 (8) , 4287-4358
Fluorine as a Key Element in Solid-State Chemistry of Mixed Anions 3d Transition Metal-Based Materials for Electronic Properties and Energy
Mixed anion compounds containing fluorine and based on 3d transition elements represent a class of materials with significant interest in solid-state chemistry. Indeed, their highly varied chemical composition, structural diversity, and the resulting electronic properties provide a rich playground for imagining new applications in the field of energy. The anions and the chemical bonds they form with the 3d transition elements are at the heart of this review. Key parameters such as electronegativity, hardness, and polarizability are introduced and discussed to better understand the charge capacity of the anion and the bonds formed in the solid. Oxyfluorides represent the most studied family due to the size similarity of the two anions, and part of the review is dedicated to the specific synthesis of these materials by systematically adjusting the fluorine content within various structures and analyzing the electronic and electrochemical properties of these compositions. The final sections focus on materials with structures often exhibiting a two-dimensional character, where ionic blocks coexist with covalent layers, such as fluorochalcogenides, fluoropnictides, and fluorotetrelides. The compositions and structures are systematically correlated with the electronic properties.
- Open Access
- 20 June 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (32)
Is Fluorine Incorporation in the La0.6Sr0.4Co0.2Fe0.8O3−δ Improving Its Electrochemical Behavior for Solid Oxide Cells Applications?
F‐doped La0.6Sr0.4Co0.2Fe0.8O3‐x−δFx (LSCFFx, x = 0.05, 0.10, and 0.20) materials are evaluated as oxygen electrodes for solid oxide fuel and electrolyser cell application. Materials have been prepared via low‐temperature topotactic route by fluorination of the parent oxide with polyvinylidene fluorine (PVDF). A decrease in the polarisation resistance (Rp) is observed for the “LSCFFx” symmetric cells. However, the improved electrochemical behavior for the symmetric cells cannot be explained by the presence of fluorine, as post mortem chemical analysis shows that fluorine is absent from the materials after the calcination treatment, contradicting previous results from the literature and calling for deeper understanding. The presence of fluorine is proved to result in a sluggish surface exchange rate compared with the LSCF oxide via pulsed isotopic exchange technique. Despite the absence of fluorine in the fabricated symmetric cell, annealing with PVDF at low temperatures prior to the electrode fabrication is proven to be a beneficial step to improve the electrochemical performance of LSCF material with applications for solid oxide cells. Studies with room temperature X‐ray diffraction, X‐ray photoelectron spectroscopy, and Mössbauer spectroscopy suggest that increased oxygen vacancy concentration, structural disorder and changes in the cobalt/iron valence state distribution are potential explanations for the reduced Rp.
- 20 June 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 14 (32)
Open AccessIs Fluorine Incorporation in the La0.6Sr0.4Co0.2Fe0.8O3−δ Improving Its Electrochemical Behavior for Solid Oxide Cells Applications?
F‐doped La0.6Sr0.4Co0.2Fe0.8O3‐x−δFx (LSCFFx, x = 0.05, 0.10, and 0.20) materials are evaluated as oxygen electrodes for solid oxide fuel and electrolyser cell application. Materials have been prepared via low‐temperature topotactic route by fluorination of the parent oxide with polyvinylidene fluorine (PVDF). A decrease in the polarisation resistance (Rp) is observed for the “LSCFFx” symmetric cells. However, the improved electrochemical behavior for the symmetric cells cannot be explained by the presence of fluorine, as post mortem chemical analysis shows that fluorine is absent from the materials after the calcination treatment, contradicting previous results from the literature and calling for deeper understanding. The presence of fluorine is proved to result in a sluggish surface exchange rate compared with the LSCF oxide via pulsed isotopic exchange technique. Despite the absence of fluorine in the fabricated symmetric cell, annealing with PVDF at low temperatures prior to the electrode fabrication is proven to be a beneficial step to improve the electrochemical performance of LSCF material with applications for solid oxide cells. Studies with room temperature X‐ray diffraction, X‐ray photoelectron spectroscopy, and Mössbauer spectroscopy suggest that increased oxygen vacancy concentration, structural disorder and changes in the cobalt/iron valence state distribution are potential explanations for the reduced Rp.
- Open Access
- 6 September 2023
- Published by Wiley in Fuel Cells
- Vol. 23 (6) , 366-376
Oxygen diffusion and surface exchange coefficients measurements under high pressure: Comparative behavior of oxygen deficient versus over‐stoichiometric air electrode materials
Mixed ionic electronic conductors (MIECs) oxides are used as electrode materials for solid oxide cell (SOC) application, as they combine high electronic conductivity as well as high oxygen diffusivity and oxygen surface exchange coefficients. The ionic transport properties can be directly determined thanks to the isotopic exchange depth profiling (IEDP) method. To date, the reported measurements have been performed at ambient pressure and below. However, for a higher efficiency of hydrogen production at the system level, it is envisaged to operate the cell between 10 and 60 bar. To characterize the MIEC oxides properties in such conditions, an innovative setup able to operate up to a total pressure of 50 bar and 900°C has been developed. The main goal of this study was to compare the behavior of two types of reference materials: the oxygen deficient La‐Sr‐Fe‐Co perovskites, and the overstoichiometric lanthanide nickelates Ln2NiO4+δ (Ln = La, Pr, Nd). Diffusion and surface exchange coefficients obtained under 6.3 bar of oxygen are measured and their evolution discussed in light of the change in oxygen stoichiometries. This analysis allows better understanding of the dependency of the surface exchange coefficient with the oxygen partial pressure.
- 6 September 2023
- Published by Wiley in Fuel Cells
- Vol. 23 (6) , 366-376
Open AccessOxygen diffusion and surface exchange coefficients measurements under high pressure: Comparative behavior of oxygen deficient versus over‐stoichiometric air electrode materials
Mixed ionic electronic conductors (MIECs) oxides are used as electrode materials for solid oxide cell (SOC) application, as they combine high electronic conductivity as well as high oxygen diffusivity and oxygen surface exchange coefficients. The ionic transport properties can be directly determined thanks to the isotopic exchange depth profiling (IEDP) method. To date, the reported measurements have been performed at ambient pressure and below. However, for a higher efficiency of hydrogen production at the system level, it is envisaged to operate the cell between 10 and 60 bar. To characterize the MIEC oxides properties in such conditions, an innovative setup able to operate up to a total pressure of 50 bar and 900°C has been developed. The main goal of this study was to compare the behavior of two types of reference materials: the oxygen deficient La‐Sr‐Fe‐Co perovskites, and the overstoichiometric lanthanide nickelates Ln2NiO4+δ (Ln = La, Pr, Nd). Diffusion and surface exchange coefficients obtained under 6.3 bar of oxygen are measured and their evolution discussed in light of the change in oxygen stoichiometries. This analysis allows better understanding of the dependency of the surface exchange coefficient with the oxygen partial pressure.
- 29 June 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (27) , 10822-10832
Impact of Anionic Ordering on the Iron Site Distribution and Valence States in Oxyfluoride Sr2FeO3+xF1–x (x = 0.08, 0.2) with a Layered Perovskite Network
Sr2FeO3F, an oxyfluoride compound with an n = 1 Ruddlesden-Popper structure, was identified as a potential interesting mixed ionic and electronic conductor (MIEC). The phase can be synthesized under a range of different pO2 atmospheres, leading to various degrees of fluorine for oxygen substitution and Fe4+ content. A structural investigation and thorough comparison of both argon- and air-synthesized compounds were performed by combining high-resolution X-ray and electron diffraction, high-resolution scanning transmission electron microscopy, Mössbauer spectroscopy, and DFT calculations. While the argon-synthesized phase shows a well-behaved O/F ordered structure, this study revealed that oxidation leads to averaged large-scale anionic disorder on the apical site. In the more oxidized Sr2FeO3.2F0.8 oxyfluoride, containing 20% of Fe4+, two different Fe positions can be identified with a 32%/68% occupancy (P4/nmm space group). This originates due to the presence of antiphase boundaries between ordered domains within the grains. Relations between site distortion and valence states as well as stability of apical anionic sites (O vs F) are discussed. This study paves the way for further studies on both ionic and electronic transport properties of Sr2FeO3.2F0.8 and its use in MIEC-based devices, such as solid oxide fuel cells.
- 29 June 2023
- Published by American Chemical Society (ACS) in Inorganic Chemistry
- Vol. 62 (27) , 10822-10832
Impact of Anionic Ordering on the Iron Site Distribution and Valence States in Oxyfluoride Sr2FeO3+xF1–x (x = 0.08, 0.2) with a Layered Perovskite Network
Sr2FeO3F, an oxyfluoride compound with an n = 1 Ruddlesden-Popper structure, was identified as a potential interesting mixed ionic and electronic conductor (MIEC). The phase can be synthesized under a range of different pO2 atmospheres, leading to various degrees of fluorine for oxygen substitution and Fe4+ content. A structural investigation and thorough comparison of both argon- and air-synthesized compounds were performed by combining high-resolution X-ray and electron diffraction, high-resolution scanning transmission electron microscopy, Mössbauer spectroscopy, and DFT calculations. While the argon-synthesized phase shows a well-behaved O/F ordered structure, this study revealed that oxidation leads to averaged large-scale anionic disorder on the apical site. In the more oxidized Sr2FeO3.2F0.8 oxyfluoride, containing 20% of Fe4+, two different Fe positions can be identified with a 32%/68% occupancy (P4/nmm space group). This originates due to the presence of antiphase boundaries between ordered domains within the grains. Relations between site distortion and valence states as well as stability of apical anionic sites (O vs F) are discussed. This study paves the way for further studies on both ionic and electronic transport properties of Sr2FeO3.2F0.8 and its use in MIEC-based devices, such as solid oxide fuel cells.
- Open Access
- 16 December 2022
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 35 (1) , 27-40
Toward Understanding of the Li-Ion Migration Pathways in the Lithium Aluminum Sulfides Li3AlS3 and Li4.3AlS3.3Cl0.7 via 6,7Li Solid-State Nuclear Magnetic Resonance Spectroscopy
Li-containing materials providing fast ion transport pathways are fundamental in Li solid electrolytes and the future of all-solid-state batteries. Understanding these pathways, which usually benefit from structural disorder and cation/anion substitution, is paramount for further developments in next-generation Li solid electrolytes. Here, we exploit a range of variable temperature 6Li and 7Li nuclear magnetic resonance approaches to determine Li-ion mobility pathways, quantify Li-ion jump rates, and subsequently identify the limiting factors for Li-ion diffusion in Li3AlS3 and chlorine-doped analogue Li4.3AlS3.3Cl0.7. Static 7Li NMR line narrowing spectra of Li3AlS3 show the existence of both mobile and immobile Li ions, with the latter limiting long-range translational ion diffusion, while in Li4.3AlS3.3Cl0.7, a single type of fast-moving ion is present and responsible for the higher conductivity of this phase. 6Li-6Li exchange spectroscopy spectra of Li3AlS3 reveal that the slower moving ions hop between non-equivalent Li positions in different structural layers. The absence of the immobile ions in Li4.3AlS3.3Cl0.7, as revealed from 7Li line narrowing experiments, suggests an increased rate of ion exchange between the layers in this phase compared with Li3AlS3. Detailed analysis of spin-lattice relaxation data allows extraction of Li-ion jump rates that are significantly increased for the doped material and identify Li mobility pathways in both materials to be three-dimensional. The identification of factors limiting long-range translational Li diffusion and understanding the effects of structural modification (such as anion substitution) on Li-ion mobility provide a framework for the further development of more highly conductive Li solid electrolytes.
- 16 December 2022
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 35 (1) , 27-40
Open AccessToward Understanding of the Li-Ion Migration Pathways in the Lithium Aluminum Sulfides Li3AlS3 and Li4.3AlS3.3Cl0.7 via 6,7Li Solid-State Nuclear Magnetic Resonance Spectroscopy
Li-containing materials providing fast ion transport pathways are fundamental in Li solid electrolytes and the future of all-solid-state batteries. Understanding these pathways, which usually benefit from structural disorder and cation/anion substitution, is paramount for further developments in next-generation Li solid electrolytes. Here, we exploit a range of variable temperature 6Li and 7Li nuclear magnetic resonance approaches to determine Li-ion mobility pathways, quantify Li-ion jump rates, and subsequently identify the limiting factors for Li-ion diffusion in Li3AlS3 and chlorine-doped analogue Li4.3AlS3.3Cl0.7. Static 7Li NMR line narrowing spectra of Li3AlS3 show the existence of both mobile and immobile Li ions, with the latter limiting long-range translational ion diffusion, while in Li4.3AlS3.3Cl0.7, a single type of fast-moving ion is present and responsible for the higher conductivity of this phase. 6Li-6Li exchange spectroscopy spectra of Li3AlS3 reveal that the slower moving ions hop between non-equivalent Li positions in different structural layers. The absence of the immobile ions in Li4.3AlS3.3Cl0.7, as revealed from 7Li line narrowing experiments, suggests an increased rate of ion exchange between the layers in this phase compared with Li3AlS3. Detailed analysis of spin-lattice relaxation data allows extraction of Li-ion jump rates that are significantly increased for the doped material and identify Li mobility pathways in both materials to be three-dimensional. The identification of factors limiting long-range translational Li diffusion and understanding the effects of structural modification (such as anion substitution) on Li-ion mobility provide a framework for the further development of more highly conductive Li solid electrolytes.