JZJianxin Zhou

Jianxin Zhou

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Jianxin Zhou has a total of 25 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Rail surface defect inspection via frequency-domain decoupling and morphological adaptive segmentation

    by Jialong Fu, Junhui Zhang, Huang Huang, Xin Yan, Jianxin Zhou

    Accurate detection and instance segmentation of rail surface defects are critical for intelligent railway maintenance. Existing methods suffer from feature obscuration under illumination-noise coupling and morphological mismatch for irregular defects. This work presents a lightweight joint detection and segmentation framework for rail surface defects by integrating frequency-domain decoupling, gradient-guided (GG) upsampling, and morphological adaptive feature fusion. We design a coordinate-aware frequency-domain enhancement module to suppress noise and enhance defect boundaries. A GG dynamic upsampling method preserves edge topology for thin cracks. A strip-adaptive prototype head handles polymorphic defect features. Experiments on three datasets show the method achieves 93.4% detection mAP@0.5 and 92.1% mask mAP@0.5 with 107.8 FPS, balancing accuracy and efficiency for edge industrial deployment.

  • A spectral–morphological enhanced lightweight framework for real-time rail surface defect detection

    by Jialong Fu, Jianxin Zhou

    To address the trade-off between detection accuracy and real-time inference in rail surface defect detection, this paper proposes a lightweight algorithm named Slim-MRM. Built upon YOLOv5s, the framework adopts a collaborative ‘structural enhancement and deep compression’ strategy and is evaluated on a self-constructed field-captured dataset. At the structural level, a Mixed-domain modulation mechanism is designed to construct a spectral-spatial dual-branch topology, which reduces background-dominated interference through learnable spectral-spatial reweighting. A Morphological reparameterization (MR) module is further introduced to enhance minute and elongated defect features via asymmetric convolutions, while being converted into an equivalent single-path structure during inference. For model compression, BN-layer sparsity-based structured pruning is combined with knowledge distillation to reduce redundancy and recover part of the accuracy loss. Experimental results show that Slim-MRM improves mAP@0.5 and recall by 3.9 and 6.3 percentage points, respectively, compared with the YOLOv5s baseline. Meanwhile, the parameters and GFLOPs are reduced by 26.5% and 25.9%, respectively, and the forward-inference speed reaches 200.7 FPS under the unified GPU protocol. Comparative evaluations on external test datasets further indicate that the proposed algorithm achieves a favorable balance between detection accuracy and computational efficiency, providing a lightweight solution for real-time rail surface defect detection.

  • Ti–Mn coating prepared by tungsten inert gas cladding and its inhibiting coking property

    by Jingpeng Li, Xiaochun Yu, Runqiu Wang, Zhiyuan Wang, Laizhi Wang, Jianxin Zhou

    The Ti–Mn cladding layers with different ratios were prepared on the surface of 310S steel using tungsten inert gas (TIG) technology for inhibiting coking in ethylene cracking, and the cladding specimens were oxidized by muffle furnace for 10 h at 800°C. The coking evaluation tests of the oxidized specimens with different Ti–Mn powder ratios were carried out with light naphtha at 850°C. The results show that when the ratio of Ti to Mn was 3:1, a protective layer of TiO2–TinO2n‐1–Mn5O8 was formed on the surface of specimen, and with the decrease of Ti element content, unstable Fe‐Ti spinel compounds appeared on the surface. When the ratio of Ti to Mn is 1:3, 1:2, and 1:1, the coking inhibition rate was 40%, 46%, and 59%, respectively. Catalytic coke formed on the surface of coating. When the ratio of Ti to Mn was 3:1, the inhibiting coking rate on the surface of the coating reached 80%, and the inhibiting coking performance was optimal, which inhibited the catalytic coking of Fe and Ni metal particles. With the increase of Ti content and the decrease of Mn content, the graphitization degree of coke decreased according to Raman spectrum.


  • Effect of glass powder sealings on the corrosion resistance of arc sprayed Al coating

    by Runqiu Wang, Jianxin Zhou

    Three series of glass powders were employed to seal arc sprayed Al coatings on P355NL1 steel in this paper. The corrosion resistance of Al coating after sealing was investigated by immersion tests and the electrochemical measurements in 3.5% NaCl solution (with a pH value of 6.5). The morphologies, phase compositions and chemical structure of the glass sealing layers were evaluated by scanning electron microscopy (SEM), X-ray diffraction (XRD), fourier transform infrared spectrum (FTIR). The results show that the open pores on the surface of arc sprayed Al coatings are entirely covered by the sealing layers with a thickness of about 10 microns, and the glass powders can permeate the coating defects. After immersion tests in 3.5 wt.% NaCl solution (a pH value of 6.5), the sealings with three series of glass powders have better corrosion resistance than that of the arc sprayed Al coating. But the top surface of the sealing layers with three glass powders become relatively loose, especially for the sealing layers with 400℃ and 500℃ glass powders. According to the analyses of XRD and FTIR, K+, Na+, and Ca2+ in the sealing layers can be captured by H+ in NaCl solution. Compared with the unsealed Al coating, all three glass sealings have more positive corrosion potential and lower corrosion current density in anode according to the electrochemical corrosion results, and the corrosion resistance of Al coating can be all enhanced significantly by the glass sealing layers. By comparison, the sealing with 680℃ glass powder has better corrosion resistance and structure stability.


  • Open Access

    High-Temperature Tolerance in Multi-Scale Cermet Solar-Selective Absorbing Coatings Prepared by Laser Cladding

    by Xuming Pang, Qian Wei, Jianxin Zhou, Huiyang Ma

    In order to achieve cermet-based solar absorber coatings with long-term thermal stability at high temperatures, a novel single-layer, multi-scale TiC-Ni/Mo cermet coating was first prepared using laser cladding technology in atmosphere. The results show that the optical properties of the cermet coatings using laser cladding were much better than the preplaced coating. In addition, the thermal stability of the optical properties for the laser cladding coating were excellent after annealing at 650 °C for 200 h. The solar absorptance and thermal emittance of multi-scale cermet coating were 85% and 4.7% at 650 °C. The results show that multi-scale cermet materials are more suitable for solar-selective absorbing coating. In addition, laser cladding is a new technology that can be used for the preparation of spectrally-selective coatings.


  • Effect of epoxy resin sealing on corrosion resistance of arc spraying aluminium coating using cathode electrophoresis method

    by Xuming Pang, Runqiu Wang, Qian Wei, Jianxin Zhou

    The arc-sprayed Al coating was sealed with epoxy resin using cathode electrophoresis method. The anti-corrosion performance of the coatings sealed with epoxy resin was studied by means of 3.5 wt.% NaCl solution test at 40℃. For comparison, the anti-corrosion performance of the Al coating sealed with boiling water was also performed at the same conditions. The results shows that the epoxy resin with a thickness of about 20 microns can entirely cover open pores and decreases the surface roughness of the as-sprayed Al coating, and the epoxy resin even permeate into the gaps among lamellar splats from open pores. After corrosion, the thickness of the epoxy resin layer has no change and can still cover the as-sprayed Al coating entirely. However, the thickness of Al coating sealed with boiling water decreases from 100 to 40 microns, which indicates that the arc-sprayed Al coating has much better corrosion resistance than the Al coating sealed with boiling water. Meanwhile, the content of substituted benzene ring in epoxy resin increases, but aromatic ring decreases according to FTIR spectra, which will cause the rigidity of epoxy resin increase, but the toughness slightly decreases after corrosion.


  • Effect of Different Welded Structures on Mechanical Properties of TA2 Tube-to-Tubesheet Joints

    by Xinlong Wei, Yang Qian, Junhui Wang, Jianxin Zhou, Xiang Ling

    Four types of TA2 welded tube-to-tubesheet joints prepared by manual tungsten arc argon-shielded welding technique are studied in this paper. The pull-out tests and low cycle fatigue tests were performed to optimize welded structures of tube and tubesheet. The results show that fractures of welded TA2 tube and tubesheet samples occur at weld zone of TA2 steel tube for the pull-out tests and low cycle fatigue tests. The extension-tubesheet welded joints have the maximum pull-out forces and the best fatigue resistance, and the internal-bore welded joint with 45 deg bevel occupies second place. Fractures are both initiated from weld toe of the outside of tube for the pull-out tests and low cycle fatigue tests. Crack propagates along the direction of 45 deg for the pull-out test. However, crack propagates perpendicularly to the direction of the applied load for low cycle fatigue test, and then fractures immediately parallel to the direction of the applied load. Fatigue striations with a spacing of about 10 μm can be observed on the fatigue crack propagation zone. However, hemispheroidal dimples exist on instant rupture zone.


  • Open Access

    Long-term phase instability in a water-quenched uranium alloy

    by J. Zhou, L.M. Hsiung

    The U–6 wt% Nb (U6Nb) alloy in the water-quenched (WQ) state has been in service for a number of years. Its long-term reliability is affected by the changes of the alloy microstructure and mechanical properties during service. In this paper, the water quenched U–6 wt% Nb (WQ-U6Nb) alloy in service for 15 years at ambient temperatures was studied using an analytical transmission electron microscopy (TEM) analysis. We found that the long-term natural aging resulted in a disorder–order phase transformation, leading to the formation of anti-phase boundaries (APBs). The newly found ordered phase was then identified by proposing two phase transform schemes, which were also discussed with regards to the potential subsequence of the microstructural evolution for the alloy in further service. The initial study also provides convincing evidence for the disorder–order transformation, which has been predicted by numerous studies to be a transient thermodynamic event before spinodal decomposition. This suggests that the long-term naturally aged WQ–U6Nb is a good model alloy to study thermodynamic and kinetic phenomena requiring chronic processes.