Kuan-Jiuh Lin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Kuan-Jiuh Lin has a total of 111 co-authors. Here are the top co-authors by number of shared publications:
- Wen-Yin Ko
Department of Chemistry, National Chung-Hsing University, Taichung 402, Taiwan
18 shared publications Ching-Yuan Cheng
Experimental Facility Division, National Synchrotron Research Center, 101 Hsin-Ann Road, Hsinchu Science Park, Hsinchu, 30076, Taiwan, ROC
6 shared publicationsShu-Juan Fu
Department of Chemistry, National Chung Hsing University, Taichung 402, Taiwan, ROC
5 shared publicationsWei-Hung Chen
Department of Chemistry, National Chung Hsing University, Taichung 402, Taiwan, R.O.C.
5 shared publicationsWei‐Hung Chen
Department of Chemistry, National Chung-Hsing University, Taichung 402, Taiwan, Tel: +886-4-22840411#802; Fax: +886-4-22854488
5 shared publicationsChuen-Yuan Hsu
IVD Dept. Siward Crystal Technology Co., Ltd., Taiwan
4 shared publications
Latest Publications
- Open Access
- 20 August 2026
- Published by Springer Nature in Communications Materials
Plasmonic near-field enhances photoelectrics in a Fabry–Pérot cavity heterostructure
- 20 August 2026
- Published by Springer Nature in Communications Materials
Open AccessPlasmonic near-field enhances photoelectrics in a Fabry–Pérot cavity heterostructure
- Open Access
- 21 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (35) , 49965-49975
Triple-Function-Intensified Photoelectric Immunosensing Platform for One-Step Detection of Cardiac Troponin I
Integrating semiconductor nanowires with a nanoplasmonic metal surface substrate enables a real-time photocurrent response, offering a promising immunosensing platform. However, achieving one-step biorecognition detection of cardiac troponin I (cTnI) biomarker remains a challenge. Herein, we present the development of an antenna-engaged nanowire-inspired porous heterostructure comprising polydopamine-functionalized titanium dioxide nanowires integrated with an Au plasmonic layer (PDA/TNW/Au-PL) for ultrasensitive immunosensors under homemade white light-emitting diodes (LEDs). This deliberate combination of Au-PL, TNWs, and PDA-based trilayer hybrid electrode design adopts the following unique triple-function signal intensification characteristics: (i) interfacial engineering of type II heterojunction and Schottky junction synergistically improve the separation efficiency of electron-hole pairs, thereby significantly improving the photoelectric performance; (ii) strong absorbance across the entire visible range spectrum (400-800 nm) facilitates exceptional plasmonic resonance, enhancing light-harvesting efficiency; and (iii) the nanowire-inspired PDA layer-based nanocavities not only enhance the mobility of charge carriers but also enable the rapid, direct binding of the cTnI antibody onto the PDA surface within 10 min. Therefore, a one-step immunosensing protocol for label-free cTnI detection with a detection time of approximately 30 min is achieved without the requirement of secondary antibodies, amplification labels, or redox mediators. It demonstrates a wide linear sensing range from 0.001 to 1000 ng mL-1, with an ultralow detection limit of 0.001 ng mL-1. Our research provides a strong impetus for point-of-care diagnostics, enabling immediate and accurate therapeutic decision-making.
- 21 August 2025
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 17 (35) , 49965-49975
Open AccessTriple-Function-Intensified Photoelectric Immunosensing Platform for One-Step Detection of Cardiac Troponin I
Integrating semiconductor nanowires with a nanoplasmonic metal surface substrate enables a real-time photocurrent response, offering a promising immunosensing platform. However, achieving one-step biorecognition detection of cardiac troponin I (cTnI) biomarker remains a challenge. Herein, we present the development of an antenna-engaged nanowire-inspired porous heterostructure comprising polydopamine-functionalized titanium dioxide nanowires integrated with an Au plasmonic layer (PDA/TNW/Au-PL) for ultrasensitive immunosensors under homemade white light-emitting diodes (LEDs). This deliberate combination of Au-PL, TNWs, and PDA-based trilayer hybrid electrode design adopts the following unique triple-function signal intensification characteristics: (i) interfacial engineering of type II heterojunction and Schottky junction synergistically improve the separation efficiency of electron-hole pairs, thereby significantly improving the photoelectric performance; (ii) strong absorbance across the entire visible range spectrum (400-800 nm) facilitates exceptional plasmonic resonance, enhancing light-harvesting efficiency; and (iii) the nanowire-inspired PDA layer-based nanocavities not only enhance the mobility of charge carriers but also enable the rapid, direct binding of the cTnI antibody onto the PDA surface within 10 min. Therefore, a one-step immunosensing protocol for label-free cTnI detection with a detection time of approximately 30 min is achieved without the requirement of secondary antibodies, amplification labels, or redox mediators. It demonstrates a wide linear sensing range from 0.001 to 1000 ng mL-1, with an ultralow detection limit of 0.001 ng mL-1. Our research provides a strong impetus for point-of-care diagnostics, enabling immediate and accurate therapeutic decision-making.
- Open Access
- 15 July 2024
- Published by American Chemical Society (ACS) in ACS Pharmacology & Translational Science
- Vol. 7 (8) , 2369-2378
Rapid-Test Kit for Cardiac Troponin I: A Reliable Enzyme-Linked-Immuno-Substrate-Assay-Based Biosensor for Daily-Use Naked-Eye Detection and Pharmacokinetic Studies for Myocardial Infarction in Cardiovascular Disease
Myocardial infarction (MI) is a severe cardiovascular event that can lead to death. Cardiac troponin I (cTnI) is an MI biomarker in the circulation system; however, methods for detecting cTnI protein require substantial time, tedious operations, an expensive reader for translating signals, and a lot of reagents. This study aims to create a cTnI protein test kit with results easily distinguished by color differences, explicitly focusing on the resolution between different concentrations that eyes can discern. These results will aid in creating a commercial, portable, convenient, daily-use rapid-test kit. This study proposes a cTnI biosensor that the naked eye can perceive, performs diagnoses based on pattern color, does not require a reader machine, is easy to operate, and is portable. Our device shortens diagnosis time, has a 0.32-200 ng/mL quantitative analysis range in the human serum matrix, achieves a 0.32 ng/mL limit of detection, and exhibits many advantages compared to a traditional cTnI ELISA plate.
- 15 July 2024
- Published by American Chemical Society (ACS) in ACS Pharmacology & Translational Science
- Vol. 7 (8) , 2369-2378
Open AccessRapid-Test Kit for Cardiac Troponin I: A Reliable Enzyme-Linked-Immuno-Substrate-Assay-Based Biosensor for Daily-Use Naked-Eye Detection and Pharmacokinetic Studies for Myocardial Infarction in Cardiovascular Disease
Myocardial infarction (MI) is a severe cardiovascular event that can lead to death. Cardiac troponin I (cTnI) is an MI biomarker in the circulation system; however, methods for detecting cTnI protein require substantial time, tedious operations, an expensive reader for translating signals, and a lot of reagents. This study aims to create a cTnI protein test kit with results easily distinguished by color differences, explicitly focusing on the resolution between different concentrations that eyes can discern. These results will aid in creating a commercial, portable, convenient, daily-use rapid-test kit. This study proposes a cTnI biosensor that the naked eye can perceive, performs diagnoses based on pattern color, does not require a reader machine, is easy to operate, and is portable. Our device shortens diagnosis time, has a 0.32-200 ng/mL quantitative analysis range in the human serum matrix, achieves a 0.32 ng/mL limit of detection, and exhibits many advantages compared to a traditional cTnI ELISA plate.
- Open Access
- 9 February 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (17) , 175403
Phosphorus-doped TiO2 mesoporous nanocrystals for anodes in high-current-rate lithium ion batteries
Limited by the intrinsic low electronic conductivity and inferior electrode kinetics, the use of TiO2 as an anode material for lithium ion batteries (LIBs) is hampered. Nanoscale surface-engineering strategies of morphology control and particle size reduction have been devoted to increase the lithium storage performances. It is found that the ultrafine nanocrystal with mesoporous framework plays a crucial role in achieving the excellent electrochemical performances due to the surface area effect. Herein, a promising anode material for LIBs consisting of phosphorus-doped TiO2 mesoporous nanocrystals (P-TMC) with ultrafine size of 2–8 nm and high specific surface area (234.164 m2 g–1) has been synthesized. It is formed through a hydrothermal process and NaBH4 assisted heat treatment for anatase defective TiO2 (TiO2–x) formation followed by a simple gas phosphorylation process in a low-cost reactor for P-doping. Due to the merits of the large specific surface area for providing more reaction sites for Li+ ions to increase the storage capacity and the presence of oxygen vacancies and P-doping for enhancing material’s electronic conductivity and diffusion coefficient of ions, the as-designed P-TMC can display improved electrochemical properties. As a LIB anode, it can deliver a high reversible discharge capacity of 187 mAh g–1 at 0.2 C and a good long cycling performance with ∼82.6% capacity retention (101 mAh g–1) after 2500 cycles at 10 C with an average capacity loss of only 0.007% per cycle. Impressively, even the current rate increases to 100 times of the original rate, a satisfactory capacity of 104 mAh g−1 can be delivered, displaying good rate capacity. These results suggest the P-TMC a viable choice for application as an anode material in LIB applications. Also, the strategy in this work can be easily extended to the design of other high-performance electrode materials with P-doping for energy storage.
- 9 February 2024
- Published by IOP Publishing in Nanotechnology
- Vol. 35 (17) , 175403
Open AccessPhosphorus-doped TiO2 mesoporous nanocrystals for anodes in high-current-rate lithium ion batteries
Limited by the intrinsic low electronic conductivity and inferior electrode kinetics, the use of TiO2 as an anode material for lithium ion batteries (LIBs) is hampered. Nanoscale surface-engineering strategies of morphology control and particle size reduction have been devoted to increase the lithium storage performances. It is found that the ultrafine nanocrystal with mesoporous framework plays a crucial role in achieving the excellent electrochemical performances due to the surface area effect. Herein, a promising anode material for LIBs consisting of phosphorus-doped TiO2 mesoporous nanocrystals (P-TMC) with ultrafine size of 2–8 nm and high specific surface area (234.164 m2 g–1) has been synthesized. It is formed through a hydrothermal process and NaBH4 assisted heat treatment for anatase defective TiO2 (TiO2–x) formation followed by a simple gas phosphorylation process in a low-cost reactor for P-doping. Due to the merits of the large specific surface area for providing more reaction sites for Li+ ions to increase the storage capacity and the presence of oxygen vacancies and P-doping for enhancing material’s electronic conductivity and diffusion coefficient of ions, the as-designed P-TMC can display improved electrochemical properties. As a LIB anode, it can deliver a high reversible discharge capacity of 187 mAh g–1 at 0.2 C and a good long cycling performance with ∼82.6% capacity retention (101 mAh g–1) after 2500 cycles at 10 C with an average capacity loss of only 0.007% per cycle. Impressively, even the current rate increases to 100 times of the original rate, a satisfactory capacity of 104 mAh g−1 can be delivered, displaying good rate capacity. These results suggest the P-TMC a viable choice for application as an anode material in LIB applications. Also, the strategy in this work can be easily extended to the design of other high-performance electrode materials with P-doping for energy storage.
- Open Access
- 31 August 2023
- Published by Wiley in Advanced Materials Interfaces
- Vol. 10 (35)
A Flexible Broadband Visible Light Plasmon‐Absorber Based on a 2D Monolayer of Au‐Nanoparticle/TiO2‐Nanowire Core–Shell Heterostructures
Plasmon‐induced hot carrier transfer is a promising approach for photoelectric applications, but its practical application is often hindered by its relatively narrow absorption bandwidth and low light harvesting at visible wavelengths. This work reports a broadband visible light plasmon‐absorber based on a dandelion‐like hierarchical metal‐semiconductor Au‐TiO2 core–shell nanostructure where each Au nanoparticle (AuNP) core is covered by an optically transparent mesh‐shell composed of TiO2 nanowires (TNWs) (denoted as AuTNW‐dCS). These AuTNW‐dCSs are assembled to form a 2D arrayed plasmonic monolayer by connecting adjacent AuNPs with cross‐linked TiO2 NWs, which can induce a remarkable broadband absorption in the visible spectrum of 500–700 nm. Driven by a wide light adsorption range, improved hot‐electron carriers, and excellent analyst's immobilization capability, the AuTNW‐dCS based photoelectric immunosensor owns excellent performance for alpha‐fetoprotein detection in human serum, with a practical linear range of 0.1–1000 ng mL−1, a low detection limit of 0.1 ng mL−1, and satisfying selectivity under visible light‐emitting diode light irradiation. This work enlightens the prospective research on the use of metal/semiconductor core–shell heterostructures as photoactive materials for sensing applications. Additionally, it gives an impetus for developing flexible nanofilms based on plasmonic metal/semiconductor nanohybrids, beneficial for building wearable point‐of‐need platform.
- 31 August 2023
- Published by Wiley in Advanced Materials Interfaces
- Vol. 10 (35)
Open AccessA Flexible Broadband Visible Light Plasmon‐Absorber Based on a 2D Monolayer of Au‐Nanoparticle/TiO2‐Nanowire Core–Shell Heterostructures
Plasmon‐induced hot carrier transfer is a promising approach for photoelectric applications, but its practical application is often hindered by its relatively narrow absorption bandwidth and low light harvesting at visible wavelengths. This work reports a broadband visible light plasmon‐absorber based on a dandelion‐like hierarchical metal‐semiconductor Au‐TiO2 core–shell nanostructure where each Au nanoparticle (AuNP) core is covered by an optically transparent mesh‐shell composed of TiO2 nanowires (TNWs) (denoted as AuTNW‐dCS). These AuTNW‐dCSs are assembled to form a 2D arrayed plasmonic monolayer by connecting adjacent AuNPs with cross‐linked TiO2 NWs, which can induce a remarkable broadband absorption in the visible spectrum of 500–700 nm. Driven by a wide light adsorption range, improved hot‐electron carriers, and excellent analyst's immobilization capability, the AuTNW‐dCS based photoelectric immunosensor owns excellent performance for alpha‐fetoprotein detection in human serum, with a practical linear range of 0.1–1000 ng mL−1, a low detection limit of 0.1 ng mL−1, and satisfying selectivity under visible light‐emitting diode light irradiation. This work enlightens the prospective research on the use of metal/semiconductor core–shell heterostructures as photoactive materials for sensing applications. Additionally, it gives an impetus for developing flexible nanofilms based on plasmonic metal/semiconductor nanohybrids, beneficial for building wearable point‐of‐need platform.
- 11 April 2023
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 70 (5) , 1168-1175
One‐pot hydrothermal synthesis of porous anatase TiO2 nanotube formed bundles for lithium ion battery anodes
Anatase phase of TiO2 nanomaterial has been deemed a potential anode material for lithium ion battery (LIB) applications because of its remarkable electrochemical properties. However, TiO2 anodes always suffer from intrinsic poor electrical conductivity and slow ion kinetics, which would restrict their practical usage. To address this issue, efficient control and design of the anatase crystal structure of TiO2 material with desirable morphology is one of the critical approaches. In this work, a good lithium storage capability of 181 mA hr g−1 at rate of 0.2C, high rate performance of 70 mA hr g−1 at 20C, and excellent cyclability of 117 mA hr g−1 with a capacity retention of 93% at 1C after 100 cycles and 84 mA hr g−1 at 10C after 1,000 cycles are observed in an optimized porous anatase TiO2 one‐dimensional nanotube bundle nanomaterial fabricated through a simple hydrothermal process with post calcination treatment. These excellent electrochemical properties of the product can be ascribed to its anatase crystal phase, 1D nanostructure, and porous framework with a large surface area, which provide it with an efficient electrode/electrolyte contact area and a faster ion/electron diffusion pathway.
- 11 April 2023
- Published by Wiley in Journal of the Chinese Chemical Society
- Vol. 70 (5) , 1168-1175
One‐pot hydrothermal synthesis of porous anatase TiO2 nanotube formed bundles for lithium ion battery anodes
Anatase phase of TiO2 nanomaterial has been deemed a potential anode material for lithium ion battery (LIB) applications because of its remarkable electrochemical properties. However, TiO2 anodes always suffer from intrinsic poor electrical conductivity and slow ion kinetics, which would restrict their practical usage. To address this issue, efficient control and design of the anatase crystal structure of TiO2 material with desirable morphology is one of the critical approaches. In this work, a good lithium storage capability of 181 mA hr g−1 at rate of 0.2C, high rate performance of 70 mA hr g−1 at 20C, and excellent cyclability of 117 mA hr g−1 with a capacity retention of 93% at 1C after 100 cycles and 84 mA hr g−1 at 10C after 1,000 cycles are observed in an optimized porous anatase TiO2 one‐dimensional nanotube bundle nanomaterial fabricated through a simple hydrothermal process with post calcination treatment. These excellent electrochemical properties of the product can be ascribed to its anatase crystal phase, 1D nanostructure, and porous framework with a large surface area, which provide it with an efficient electrode/electrolyte contact area and a faster ion/electron diffusion pathway.
- 29 November 2022
- Published by Springer Nature in Journal of Materials Research
- Vol. 38 (2) , 380-390
Improved performance of supercapacitor and zinc-ion battery based on 3D architectured porous manganese oxide-based nanosheets as binder-free electrodes
- 29 November 2022
- Published by Springer Nature in Journal of Materials Research
- Vol. 38 (2) , 380-390
Improved performance of supercapacitor and zinc-ion battery based on 3D architectured porous manganese oxide-based nanosheets as binder-free electrodes
- 14 September 2022
- Published by Wiley in ChemElectroChem
- Vol. 9 (18)
Facile Construction of Zn‐Doped Mn3O4−MnO2 Vertical Nanosheets for Aqueous Zinc‐Ion Battery Cathodes
Aqueous rechargeable batteries with good electrochemical performances have been considered as compelling alternatives in miniaturized energy storage units due to their small‐size, better safety, greener manufacturing condition, and easy‐to‐recycle process. Herein, a binder‐free manganese oxide (MnOx), comprising of MnO2 and Mn3O4 constructed by engineering it with zinc doping used as a cathode material for eco‐friendly aqueous Zn ion battery is developed. A green and simple electrochemical deposition synthesis of Zn‐doped Mn3O4−MnO2 nanocomposite with vertically‐oriented 3D porous cereal‐like nanosheet framework (ZnMM‐NSs) is reproducibly performed directly onto the surface of AgCNT modified Ni foam in a mild aqueous ZnSO4+MnSO4 electrolyte. To the best of our knowledge, this is the first report on Zn doping in Mn3O4−MnO2 nanocomposite and the subsequent device assembly for aqueous zinc‐ion batteries. Zinc doping induced electrical/ionic conductivity enhancement, along with more active sites provided by 3D porous cereal‐like nanostructures and multiple Mn valences, this ZnMM‐NSs cell can deliver a high capacity, good rate performance, and satisfying cycling stability. Also, the Zn‐doped manganese oxides are obtained by a green method, which can reduce the entire cost, the usage of toxic solvents, the consumption of energy, and the disposable by‐product, paving the way for developing cost‐effective, easy‐to‐recycle, and environmentally friendly next‐generation energy storage systems.
- 14 September 2022
- Published by Wiley in ChemElectroChem
- Vol. 9 (18)
Facile Construction of Zn‐Doped Mn3O4−MnO2 Vertical Nanosheets for Aqueous Zinc‐Ion Battery Cathodes
Aqueous rechargeable batteries with good electrochemical performances have been considered as compelling alternatives in miniaturized energy storage units due to their small‐size, better safety, greener manufacturing condition, and easy‐to‐recycle process. Herein, a binder‐free manganese oxide (MnOx), comprising of MnO2 and Mn3O4 constructed by engineering it with zinc doping used as a cathode material for eco‐friendly aqueous Zn ion battery is developed. A green and simple electrochemical deposition synthesis of Zn‐doped Mn3O4−MnO2 nanocomposite with vertically‐oriented 3D porous cereal‐like nanosheet framework (ZnMM‐NSs) is reproducibly performed directly onto the surface of AgCNT modified Ni foam in a mild aqueous ZnSO4+MnSO4 electrolyte. To the best of our knowledge, this is the first report on Zn doping in Mn3O4−MnO2 nanocomposite and the subsequent device assembly for aqueous zinc‐ion batteries. Zinc doping induced electrical/ionic conductivity enhancement, along with more active sites provided by 3D porous cereal‐like nanostructures and multiple Mn valences, this ZnMM‐NSs cell can deliver a high capacity, good rate performance, and satisfying cycling stability. Also, the Zn‐doped manganese oxides are obtained by a green method, which can reduce the entire cost, the usage of toxic solvents, the consumption of energy, and the disposable by‐product, paving the way for developing cost‐effective, easy‐to‐recycle, and environmentally friendly next‐generation energy storage systems.
- Open Access
- 16 August 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 58 (73) , 10154-10157
High-porosity hybrid bilayer-enabled portable LED plasmonic biosensing
A stable and efficient photoanode made of a hybrid layer of TiO2-nanowires/Au-nanoparticles with nanocavities and plasmonic metasurface features, representing state-of-the-art interface technology for boosting LED-driven plasmoelectric biosensing.
- 16 August 2022
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 58 (73) , 10154-10157
Open AccessHigh-porosity hybrid bilayer-enabled portable LED plasmonic biosensing
A stable and efficient photoanode made of a hybrid layer of TiO2-nanowires/Au-nanoparticles with nanocavities and plasmonic metasurface features, representing state-of-the-art interface technology for boosting LED-driven plasmoelectric biosensing.
- 30 June 2022
- Published by Science Impact, Ltd. in Impact
- Vol. 2022 (3) , 6-8
Preparation of high-efficiency anti-reflective oxide electrodes and their application in biomedical testing and thin-film lithium batteries
Nanomaterials hold great potential in the development of lithium-ion microbatteries and could assist in developing ever smaller and more reliable power sources to facilitate 21st Century life. Professor Kuan-Jiuh Lin is based in the Department of Chemistry, National Chung Hsing University, Taiwan, and runs the Interfacial Optical-Electronic (IOE) Lab. He and his team leader Dr Wen-Yin Ko are working to address gaps in nanotechnology, including how to conquer the strong interfacial coupling between the porous semiconductor membrane and the electro-plasmon metal-surface film. Their research is expected to have broad applications across electronics and optoelectronics. In a recent project, the researchers are working to develop more efficient lithium-ion microbatteries (micro-LIBs) using active nanostructured anode materials such as carbon nanomaterials composed of porous carbon, graphene and carbon nanotubes (CNTs). The researchers have developed a lightweight and high-rate CNT-based anode system that holds great potential for fast-charging batteries. The team has also created metal-doped MnO2 nanowalls with inter-networked vertically-oriented three-dimensional (3D) porous frameworks directly onto a AgCNT modified current collector, resulting in a superior performance anode material for LIBs. The researchers also created a novel 3D porous scaffold anode material of silicon–porphyrin pearl-chain-like nanowires which was placed onto the surface of a bundled titanium dioxide (TiO2) nanowire. In a world first, Lin and the team were able to achieve dial functionalities of antireflective and electrochemical properties-based anatase TiO2 nanowire devices with a high-porosity cross-linked geometry directly grown onto transparent conductive glass.
- 30 June 2022
- Published by Science Impact, Ltd. in Impact
- Vol. 2022 (3) , 6-8
Preparation of high-efficiency anti-reflective oxide electrodes and their application in biomedical testing and thin-film lithium batteries
Nanomaterials hold great potential in the development of lithium-ion microbatteries and could assist in developing ever smaller and more reliable power sources to facilitate 21st Century life. Professor Kuan-Jiuh Lin is based in the Department of Chemistry, National Chung Hsing University, Taiwan, and runs the Interfacial Optical-Electronic (IOE) Lab. He and his team leader Dr Wen-Yin Ko are working to address gaps in nanotechnology, including how to conquer the strong interfacial coupling between the porous semiconductor membrane and the electro-plasmon metal-surface film. Their research is expected to have broad applications across electronics and optoelectronics. In a recent project, the researchers are working to develop more efficient lithium-ion microbatteries (micro-LIBs) using active nanostructured anode materials such as carbon nanomaterials composed of porous carbon, graphene and carbon nanotubes (CNTs). The researchers have developed a lightweight and high-rate CNT-based anode system that holds great potential for fast-charging batteries. The team has also created metal-doped MnO2 nanowalls with inter-networked vertically-oriented three-dimensional (3D) porous frameworks directly onto a AgCNT modified current collector, resulting in a superior performance anode material for LIBs. The researchers also created a novel 3D porous scaffold anode material of silicon–porphyrin pearl-chain-like nanowires which was placed onto the surface of a bundled titanium dioxide (TiO2) nanowire. In a world first, Lin and the team were able to achieve dial functionalities of antireflective and electrochemical properties-based anatase TiO2 nanowire devices with a high-porosity cross-linked geometry directly grown onto transparent conductive glass.