AAAmanda M. Agnew

Amanda M. Agnew

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Amanda M. Agnew has a total of 74 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Variation in Three-Dimensional Shape of the Tibial Diaphysis and Relationships with Biological Sex

    by Christopher M. Goden, Amanda M. Agnew, Angela L. Harden

    The tibial diaphysis is frequently viewed as a simple structure despite exhibiting complex morphological variation. While prior investigations have contextualized variation in tibial morphometry via cross-sectional and whole-bone approaches, variation present in the three-dimensional diaphysis alone is largely unknown. Moreover, specimen-specific geometry is often simplified and scaled in computational and biomechanical frameworks, limiting understanding of how diaphyseal morphology influences mechanical response. Therefore, the objective of this research is to characterize diaphyseal shape variation in human tibiae prior to experimental loading. Laser surface scans and computed tomography data were collected from 60 human tibiae obtained through an experimental trauma dataset. Diaphyseal shape was evaluated in both size-dependent (unscaled; UPC) and size-independent (scaled; SPC) analyses to distinguish size-associated from size-independent traits. In the unscaled analysis, variation was dominated by overall size, whereas size normalization redistributed variance across multiple dimensions of diaphyseal shape while preserving major morphological themes across analyses. Significant sex-associated differences were identified in overall length and diaphyseal circumference in the unscaled analysis and in anterior crest/lateral surface morphology and diaphyseal tapering after size normalization. These results define anatomically interpretable diaphyseal shape traits from pre-impact morphology within a sample with known experimental outcomes, providing an empirical basis for future work linking baseline morphology with biomechanical behavior and applied forensic contexts.

  • Open Access

    Relationships between human tibia diaphysis shape and experimental injury outcomes

    by Christopher M. Goden, Amanda M. Agnew, Angela L. Harden

    Interpretation is central to skeletal trauma analysis; however, the influence of intrinsic skeletal variation, such as long bone shape, on injury is not fully understood. While previous studies have emphasized extrinsic variables such as loading rate, direction, and number of impacts, this study investigates whether diaphyseal shape variation of the tibia contributes to differential injury outcomes sustained under standardized blunt trauma experiments. Sixty adult human tibiae were subjected to controlled four‐point bending tests in a lateral‐medial direction at 6 m/s, and resulting fractures were analyzed by count and overall injury complexity. Diaphyseal surface morphology was quantified as continuous shape traits represented by unscaled and scaled principal components to capture size‐dependent and shape‐only variation, respectively. Multinomial logistic regression models identified shape‐injury associations and examined the moderating effects of age and sex. Multiple shape traits, particularly those involving anterior crest morphology and diaphyseal curvature, were significantly associated with fracture count and injury complexity. Notably, low‐variance traits also influenced outcomes, suggesting individual morphology may modulate injury outcomes. Sex‐ and age‐based interactions further indicate that similar morphologies may result in different outcomes between males or females and across adult age groups. Compared to fracture count, injury complexity produced more interpretable and biologically meaningful results. Collectively, these results show injury outcomes vary with tibial morphology, even under identical loading conditions, suggesting shape may warrant consideration when interpreting trauma in forensic casework. Accounting for shape variation may improve interpretation reliability, avoid misinterpretation of extrinsic factors, and support the development of probabilistic frameworks in forensic reconstructions.


  • Open Access

    Multi-site phantomless bone mineral density from clinical quantitative computed tomography in males

    by Zachary A Haverfield, Amanda M Agnew, Kathryn Loftis, Jun Zhang, Lauren E Hayden, Randee L Hunter

    Volumetric bone mineral density (vBMD) is commonly assessed using QCT. Although standard vBMD calculation methods require phantom rods that may not be available, internal-reference phantomless (IPL) and direct measurements of Hounsfield units (HU) can be used to calculate vBMD in their absence. Yet, neither approach has been systemically assessed across skeletal sites, and HU need further validation as a vBMD proxy. This study evaluated the accuracy of phantomless methods, including IPL and regression-based phantomless (RPL) calibration using HU to calculate vBMD, compared to phantom-based (PB) methods. vBMD from QCT scans of 100 male post-mortem human subjects (PMHS) was calculated using site-specific PB calibration at multiple skeletal sites throughout the body. A development sample of 50/100 PMHS was used to determine site-specific reference material density for IPL calibration and RPL equations. Reference densities and equations from the development sample were used to calculate IPL and RPL vBMD on the remaining 50/100 PMHS for method validation. PB and IPL/RPL vBMD were not significantly different (p > .05). Univariate regressions between PB and IPL/RPL vBMD were universally significant (p < 0.05), except for IPL Rad-30 (p = 0.078), with a percent difference across all sites of 6.97% ± 5.95% and 5.22% ± 4.59% between PB and IPL/RPL vBMD, respectively. As vBMD increased, there were weaker relationships and larger differences between PB vBMD and IPL/RPL vBMD. IPL and RPL vBMD had strong relationships with PB vBMD across sites (R2 = 97.99, R2 = 99.17%, respectively), but larger residual differences were found for IPL vBMD. As the accuracy of IPL/RPL vBMD varied between sites, phantomless methods should be site-specific to provide values more comparable to PB vBMD. Overall, this study suggests that RPL calibration may better represent PB vBMD compared to IPL calibration, increases the utility of opportunistic QCT, and provides insight into bone quality and fracture risk. Quantitative computed tomography (QCT) provides assessments of bone quality using measurements of volumetric bone mineral density (vBMD). Specialized accessories to calculate vBMD (ie, phantom rods) are not always available, so phantomless methods using reference materials within the scan are often utilized. The current study calculated vBMD from 100 males across multiple bones in the body using 2 different methods that do not rely on phantom rods. A development sample of 50 males was used to create internal-reference phantomless (IPL) and regression-based phantomless (RPL) calibration methods, and the remaining 50 were used to validate each method. Both IPL and RPL calibration performed well in comparison to the standard phantom-based approach, but differences in IPL vBMD were larger. These findings indicate that site-specific phantomless methods are trustworthy, but RPL methods may provide better estimates of BMD than IPL methods, especially at denser skeletal sites.


  • Open Access

    Sex differences in workload in medieval Poland: Patterns of asymmetry and biomechanical adaptation in the upper limb at Giecz

    by Emma T. Brzezinski, Mark Hubbe, Randee L. Hunter, Amanda M. Agnew

    Objectives: This study characterizes sexual dimorphism in skeletal markers of upper limb mechanical loading due to lateralization as evidence of division of labor in medieval Giecz, Poland.Methods: Twenty‐six dimensions for paired humeri, clavicles, and radii representing adult males (n = 89) and females (n = 53) were collected from a skeletal sample from the cemetery site Gz4. Percent directional asymmetry (DA) and absolute asymmetry (AA) for each dimension were compared among bones, osteometric subcategories, and sex. Additionally, side bias and sex differences were assessed in degenerative joint disease (DJD) and entheseal changes (ECs).Results: Nearly all measurements revealed significant asymmetry favoring the right side. Asymmetry was most pronounced in midshaft dimensions with few sex differences. There were more correlations among dimensions within elements than between elements, mainly in the midshaft. No laterality in DJD frequencies was noted for either sex, but females demonstrated significantly lower odds of having DJD than males in most joints. Most ECs demonstrated a right‐bias and association with DA with no sex‐specific patterns except the biceps brachii insertion, where females were ~5 times more likely to be scored “right” than males.Discussion: The general lack of sex differences in asymmetry and ECs suggests similarly demanding workloads for females and males, with the exception of sex‐specific functional loading differences in the forearm. Further, DJD data suggest males engaged in more intensive activities involving the upper limb. These results enhance understanding of workload in this important historical period and provide a comparison for asymmetry in past populations.


  • Open Access

    Analysis of injury mechanism and thoracic response of elderly, small female PMHS in near-side impact scenarios

    by John Bolte, Clare Fibbi, Angela C. Tesny, Yun-Seok Kang, Amanda M. Agnew, Benjamin K. Shurtz, Bengt Pipkorn, Heather Rhule, Kevin Moorhouse

    In 2020, 17% of all crash fatalities were individuals aged 65 years or older. Crash data also revealed that for older occupants, thoracic related injuries are among the leading causes of fatality. Historically, the majority of near-side impact postmortem human subjects (PMHS) studies used a generic load wall to capture external loads that were applied to PMHS. While these data were helpful in documenting biofidelity, they did not represent a realistic response an occupant would undergo in a near-side crash. The objective of this research was to test small, elderly female PMHS in a repeatable, realistic near-side impact crash scenario to investigate current injury criteria as they relate to this vulnerable population. Ten small, elderly PMHS were subjected to a realistic near-side impact loading condition. The PMHS were targeted to be elderly females age 60+, approximately 5th percentile in height and weight, with osteopenic areal bone mineral density. Each subject was seated on a mass-production seat, equipped with a side airbag and standard three-point restraint with a pretensioner. Other boundary conditions included an intruding driver's side door. PMHS instrumentation included strain gages on ribs 3-10 bilaterally to identify fracture timing. Two chestbands were used to measure chest deflection, one at the level of the axilla and one at the level of the xiphoid process. Injuries observed included rib fractures, particularly on the struck side, and in multiple cases a flail chest was observed. Eight of ten subjects resulted in AIS3+ thoracic injuries, despite previously tested ATDs predicting less than a 10% chance of AIS3+ injury. Subjects crossed the threshold for AIS3 injury in the range of only 1% - 9% chest compression. Additionally, mechanisms of injury varied, as some injuries were incurred by door interactions while others came during airbag interactions. This research points to two areas of concern that likely require further analysis: (1) the appropriateness of potentially oversimplified PMHS testing to establish injury thresholds and define injury criteria for complicated crash scenarios; (2) the importance of identifying the precise timing of injuries to better understand the effect of current passive restraint systems.


  • Open Access

    Thoracic responses and injuries to male postmortem human subjects (PMHS) in rear-facing seat configurations in high-speed frontal impacts

    by Yun-Seok Kang, Jason Stammen, Amanda M. Agnew, Gretchen H. Baker, Vikram Pradhan, Alexander Bendig, Alena Hagedorn, Kevin Moorhouse, John H. Bolte Iv

    Objective: One potential nonstandard seating configuration for vehicles with automated driving systems (ADS) is a reclined seat that is rear-facing when in a frontal collision. There are limited biomechanical response and injury data for this seating configuration during high-speed collisions. The main objective of this study was to investigate thoracic biomechanical responses and injuries to male postmortem human subjects (PMHS) in a rear-facing scenario with varying boundary conditions.Method: Fourteen rear-facing male PMHS tests (10 previously published and 4 newly tested) were conducted at two different recline angles (25-degree and 45-degree) in 56 km/h frontal impacts. PMHS were seated in two different seats; one used a Fixed D-Ring (FDR) seat belt assembly and one used an All Belts To Seat (ABTS) restraint. For thoracic instrumentation, strain gages were attached to ribs to quantify strain and fracture timing. A chestband was installed at the mid-sternum level to quantify anterior-posterior (AP) chest deflections. Data from the thorax instrumentation were analyzed to investigate injury mechanisms.Results: The PMHS sustained a greater number of rib fractures (NRF) in the 45-degree recline condition (12 ± 7 NRF for ABTS45 and 25 ± 18 NRF for FDR45) than the 25-degree condition (6 ± 4 NRF for ABTS25 and 12 ± 8 NRF for FDR25), despite AP chest compressions in the 45-degree condition (-23.7 ± 9.4 mm for ABTS45 and -39.6 ± 11.9 mm for FDR45) being smaller than the 25-degree condition (-38.9 ± 16.9 mm for ABTS25 and -55.0 ± 4.4 mm for FDR25). The rib fractures from the ABTS condition were not as symmetric as the FDR condition in the 25-degree recline angle due to a belt retractor structure located at one side of the seatback frame. Average peak AP chest compression occurred at 45.7 ± 3.4 ms for ABTS45, 45.6 ± 3.1 ms for FDR45, 46.7 ± 1.9 ms for ABTS25, and 46.9 ± 2.3 ms for FDR25. Average peak seatback resultant force occurred at 43.9 ± 0.9 ms for ABTS45, 44.6 ± 0.8 ms for FDR45, 42.5 ± 0.2 ms for ABTS25, and 41.5 ± 0.5 ms for FDR25. The majority of rib fractures occurred after peak AP chest compression and peak seatback resultant force likely due to the ramping motion of the PMHS, which might create a combined loading (e.g., AP deflection and upward deflection) to the thorax. Although NRF in the 45-degree reclined condition was greater than the 25-degree recline condition, similar magnitudes of rib strains were observed regardless of seat and restraint types, while strain modes varied.Conclusions: The majority of rib fractures occurred after peak AP chest compression and peak seatback force, especially in FDR25, ABTS45, and FDR45, while the PMHS ramped up along the seatback. AP chest compression, seatback load, and strain measured along the rib could not explain the greater NRF in the 45-degree recline conditions. A complex combination of AP chest deflection with upward deflection was discovered as a possible mechanism for rib fractures in PMHS subjected to rear-facing frontal impacts in this study.


  • Differential Cortical Volumetric Bone Mineral Density within the Human Rib

    by Zachary A. Haverfield, Amanda M. Agnew, Randee L. Hunter


  • Open Access

    Comparison of small female PMHS thoracic responses to scaled response corridors in a frontal hub impact

    by Yun-Seok Kang, Alexander Bendig, Jason Stammen, Erin Hutter, Kevin Moorhouse, John H. Bolte, Amanda M. Agnew

    The purpose of this study was to generate biomechanical response corridors of the small female thorax during a frontal hub impact and evaluate scaled corridors that have been used to assess biofide...


  • Open Access

    Pore Extractor 2D: An ImageJ toolkit for quantifying cortical pore morphometry on histological bone images, with application to intraskeletal and regional patterning

    by Mary E. Cole, Sam D. Stout, Victoria M. Dominguez, Amanda M. Agnew

    Objectives: Cortical porosity is used as a proxy of bone quality, fragility, and remodeling activity in anthropological contexts. Histological quantification is limited by time‐intensive manual annotation. Pore Extractor 2D is an ImageJ toolkit developed for computer‐assisted pore identification and automated pore morphometry.Materials and Methods: Toolkit components include: (1) Utilities for cortical border clearing, (2) Image Pre‐Processing: Image contrast enhancement and noise reduction, (3) Pore Extractor: User‐directed options for segmenting, closing, and smoothing pore spaces, (4) Pore Modifier: Utilities to expedite manual correction of extracted pore spaces, and (5) Pore Analyzer: Morphometric analyses by pore type and anatomical region. Pore Extractor 2D was validated against manual annotation in a sample of midshaft mid‐thoracic human ribs (n = 30). Intraskeletal and regional analyses were piloted on matched (n = 9) human midshaft femora, tibiae, and sixth ribs.Results: Pore Extractor 2D was statistically consistent with manual annotation of bone area, percent porosity, pore density, and mean pore size. The toolkit significantly (p < .05) reduced the smoothing effect of manual annotation by fitting pore borders to pixel brightness variations. Intraskeletal analyses found that the femur and tibia significantly exceeded the rib in “cortical” type porosity, while the rib predominantly formed “trabecularized” type porosity. Regional analyses determined that pore system expansion was elevated in the anterior femur, the anterior and medial tibia, and the cutaneous cortex of the rib.Discussion: This toolkit provides expedited, semi‐automated porosity quantification that replicates manual annotation. Intraskeletal and regional variation in pore morphometry reflect localized strain patterning.