David Schmicker
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
David Schmicker has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Christian Willberg
Magdeburg‐Stendal University of Applied Sciences Magdeburg Germany
2 shared publications J. Strackeljan
2 shared publications- Christoph Rößler
Institute of Mechanics, Otto von Guericke University Magdeburg, 39106 Magdeburg, Germany
1 shared publication - Elmar Woschke
Otto von Guericke University Magdeburg Magdeburg Germany
1 shared publication - Fangsen Cui
Institute of High Performance Computing (IHPC), Agency for Science, Technology and Research (A*STAR), 1 Fusionopolis Way, #16-16 Connexis, Singapore 138632, Singapore
1 shared publication - J. M. Vivar-Perez
Faculty of Mechanical Engineering Otto-von-Guericke University Magdeburg
1 shared publication
Latest Publications
- Open Access
Identification of the Flow Properties of a 0.54% Carbon Steel during Continuous Cooling
The determinination of material properties is an essential step in the simulation of manufacturing processes. For hot deformation processes, consistently assessed Carreau fluid constitutive model derived in prior works by Schmicker et al. might be used, in which the flow stress is described as a function of the current temperature and the current strain rate. The following paper aims to extend the prior mentioned model by making a distinction, whether the material is being heated or cooled, enhancing the model capabilities to predict deformations within the cooling process. The experimental identifaction of the material parameters is demonstrated for a structural carbon steel with 0.54% carbon content. An approach to derive the flow properties during cooling from the same samples used at heating is presented, which massively reduces the experimental effort in future applications.
Open AccessIdentification of the Flow Properties of a 0.54% Carbon Steel during Continuous Cooling
The determinination of material properties is an essential step in the simulation of manufacturing processes. For hot deformation processes, consistently assessed Carreau fluid constitutive model derived in prior works by Schmicker et al. might be used, in which the flow stress is described as a function of the current temperature and the current strain rate. The following paper aims to extend the prior mentioned model by making a distinction, whether the material is being heated or cooled, enhancing the model capabilities to predict deformations within the cooling process. The experimental identifaction of the material parameters is demonstrated for a structural carbon steel with 0.54% carbon content. An approach to derive the flow properties during cooling from the same samples used at heating is presented, which massively reduces the experimental effort in future applications.
- 16 January 2018
- Published by ASME International in Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems
- Vol. 1 (2) , 021006
A Benchmark Study of Modeling Lamb Wave Scattering by a Through Hole Using a Time-Domain Spectral Element Method
Ultrasonic guided waves (GWs) are being extensively investigated and applied to nondestructive evaluation and structural health monitoring. Guided waves are, under most circumstances, excited in a frequency range up to several hundred kilohertz or megahertz for detecting defect/damage effectively. In this regard, numerical simulation using finite element analysis (FEA) offers a powerful tool to study the interaction between wave and defect/damage. Nevertheless, the simulation, based on linear/quadratic interpolation, may be inaccurate to depict the complex wave mode shape. Moreover, the mass lumping technique used in FEA for diagonalizing mass matrix in the explicit time integration may also undermine the calculation accuracy. In recognition of this, a time domain spectral element method (SEM)—a high-order FEA with Gauss–Lobatto–Legendre (GLL) node distribution and Lobatto quadrature algorithm—is studied to accurately model wave propagation. To start with, a simplified two-dimensional (2D) plane strain model of Lamb wave propagation is developed using SEM. The group velocity of the fundamental antisymmetric mode (A0) is extracted as indicator of accuracy, where SEM exhibits a trend of quick convergence rate and high calculation accuracy (0.03% error). A benchmark study of calculation accuracy and efficiency using SEM is accomplished. To further extend SEM-based simulation to interpret wave propagation in structures of complex geometry, a three-dimensional (3D) SEM model with arbitrary in-plane geometry is developed. Three-dimensional numerical simulation is conducted in which the scattering of A0 mode by a through hole is interrogated, showing a good match with experimental and analytical results.
- 16 January 2018
- Published by ASME International in Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems
- Vol. 1 (2) , 021006
A Benchmark Study of Modeling Lamb Wave Scattering by a Through Hole Using a Time-Domain Spectral Element Method
Ultrasonic guided waves (GWs) are being extensively investigated and applied to nondestructive evaluation and structural health monitoring. Guided waves are, under most circumstances, excited in a frequency range up to several hundred kilohertz or megahertz for detecting defect/damage effectively. In this regard, numerical simulation using finite element analysis (FEA) offers a powerful tool to study the interaction between wave and defect/damage. Nevertheless, the simulation, based on linear/quadratic interpolation, may be inaccurate to depict the complex wave mode shape. Moreover, the mass lumping technique used in FEA for diagonalizing mass matrix in the explicit time integration may also undermine the calculation accuracy. In recognition of this, a time domain spectral element method (SEM)—a high-order FEA with Gauss–Lobatto–Legendre (GLL) node distribution and Lobatto quadrature algorithm—is studied to accurately model wave propagation. To start with, a simplified two-dimensional (2D) plane strain model of Lamb wave propagation is developed using SEM. The group velocity of the fundamental antisymmetric mode (A0) is extracted as indicator of accuracy, where SEM exhibits a trend of quick convergence rate and high calculation accuracy (0.03% error). A benchmark study of calculation accuracy and efficiency using SEM is accomplished. To further extend SEM-based simulation to interpret wave propagation in structures of complex geometry, a three-dimensional (3D) SEM model with arbitrary in-plane geometry is developed. Three-dimensional numerical simulation is conducted in which the scattering of A0 mode by a through hole is interrogated, showing a good match with experimental and analytical results.
- 1 August 2014
- Published by Elsevier in Journal of Computational Physics
- Vol. 270, 478-489
Implicit Geometry Meshing for the simulation of Rotary Friction Welding
- 1 August 2014
- Published by Elsevier in Journal of Computational Physics
- Vol. 270, 478-489
Implicit Geometry Meshing for the simulation of Rotary Friction Welding
- Open Access
- 1 May 2014
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (1) , 541-558
TESTING OF HIGHER ORDER FINITE ELEMENTS BASED ON LAGRANGE POLYNOMIALS IN DEPENDENCE OF THE UNDERLYING NODAL GRID
The paper deals with the investigation of a higher order finite element method utilizing Lagrangian interpolation polynomials as shape functions, also often ref...
- 1 May 2014
- Published by Editora Edgard Blucher, Ltda.
- Vol. 1 (1) , 541-558
Open AccessTESTING OF HIGHER ORDER FINITE ELEMENTS BASED ON LAGRANGE POLYNOMIALS IN DEPENDENCE OF THE UNDERLYING NODAL GRID
The paper deals with the investigation of a higher order finite element method utilizing Lagrangian interpolation polynomials as shape functions, also often ref...
- 1 October 2013
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 265, 186-194
A robust simulation of Direct Drive Friction Welding with a modified Carreau fluid constitutive model
- 1 October 2013
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 265, 186-194
A robust simulation of Direct Drive Friction Welding with a modified Carreau fluid constitutive model
- Top Cited Papers
- 1 October 2012
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 241-244, 246-261
Comparison of different higher order finite element schemes for the simulation of Lamb waves
- 1 October 2012
- Published by Elsevier in Computer Methods in Applied Mechanics and Engineering
- Vol. 241-244, 246-261
Top Cited PapersComparison of different higher order finite element schemes for the simulation of Lamb waves
- 1 July 2012
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 518, 95-105
Development, Validation and Comparison of Higher Order Finite Element Approaches to Compute the Propagation of Lamb Waves Efficiently
When considering structural health monitoring (SHM) applications efficient and powerful numerical methods are required to predict the behavior of ultrasonic guided waves and to design SHM systems. The existing commercial explicit finite element analysis tools based on standard linear displacement elements quickly reach their limits when applied to ultrasonic waves in thin plates, so called Lamb waves. It is known that the required temporal and spatial resolution causes enormous computational costs. One resort to overcome this problem is the application of special finite elements utilizing higher order polynomial shape functions (p > 2). The current paper is focused on the development of such higher order finite elements and the verification of their accuracy and performance. In the paper we compare and evaluate the capabilities of spectral finite elements, p-version finite elements and isogeometric finite elements. Their advantages and disadvantages with respect to ultrasonic wave propagation problems are discussed and their properties are demonstrated by solving a benchmark problem. Higher order finite elements with varying polynomial degrees in longitudinal and transversal direction (anisotropic ansatz space) are investigated and convergence studies are performed. The results of the convergence studies are summarized and a guideline to estimate the optimal discretization is prepared. If the required accuracy is known, the proposed guideline provides a helpful means to determine both the element size and the polynomial degree template for a given model.
- 1 July 2012
- Published by Trans Tech Publications, Ltd. in Key Engineering Materials
- Vol. 518, 95-105
Development, Validation and Comparison of Higher Order Finite Element Approaches to Compute the Propagation of Lamb Waves Efficiently
When considering structural health monitoring (SHM) applications efficient and powerful numerical methods are required to predict the behavior of ultrasonic guided waves and to design SHM systems. The existing commercial explicit finite element analysis tools based on standard linear displacement elements quickly reach their limits when applied to ultrasonic waves in thin plates, so called Lamb waves. It is known that the required temporal and spatial resolution causes enormous computational costs. One resort to overcome this problem is the application of special finite elements utilizing higher order polynomial shape functions (p > 2). The current paper is focused on the development of such higher order finite elements and the verification of their accuracy and performance. In the paper we compare and evaluate the capabilities of spectral finite elements, p-version finite elements and isogeometric finite elements. Their advantages and disadvantages with respect to ultrasonic wave propagation problems are discussed and their properties are demonstrated by solving a benchmark problem. Higher order finite elements with varying polynomial degrees in longitudinal and transversal direction (anisotropic ansatz space) are investigated and convergence studies are performed. The results of the convergence studies are summarized and a guideline to estimate the optimal discretization is prepared. If the required accuracy is known, the proposed guideline provides a helpful means to determine both the element size and the polynomial degree template for a given model.