MIMaryna Ivashchenko

Maryna Ivashchenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Maryna Ivashchenko has a total of 36 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    PROFESSIONAL BURNOUT OF WORKERS IN PRODUCTION: COMPREHENSIVE ANALYSIS AND WAYS TO OVERCOME IT

    by V. Abrakitov, M. Ivashchenko, S. Logvinkov, A. Rogozin

    Burnout is a state of emotional, physical, and psychological exhaustion that occurs as a result of chronic stress at work. In the production sphere, it manifests itself especially acutely due to monotony, physical exertion and the influence of harmful factors. The theoretical foundations of professional burnout are: – Emotional exhaustion – a feeling of fatigue, emptiness. – Depersonalization – cynicism, indifference to colleagues and work. – Decreased personal achievements – loss of confidence, motivation. The stages of development of professional burnout are as follows: 1. Enthusiasm → 2. Fatigue → 3. Exhaustion → 4. Depersonalization → 5. Decrease in achievements. Main symptoms: – Emotional – apathy, irritability, anxiety. – Physical – fatigue, headaches, insomnia. – Cognitive – decreased concentration. – Behavioral – procrastination, isolation. Factors contributing to burnout: – Individual – perfectionism, low self-esteem, lack of work-life balance. – Organizational – excessive workload, unfair remuneration, poor communication. – Social – isolation, pressure from society to succeed. Burnout in the production sector has the following negative consequences: exhaustion, loss of interest, health problems. For the enterprise, this means staff turnover, a decrease in product quality and an increase in injuries, financial losses. The most relevant methods for diagnosing burnout are as follows: individual interviews; observation of employee behavior; analysis of productivity and frequency of sick leave. Of particular note is the Maslach questionnaire (MBI): (Diagnosis of professional burnout. Maslach Burnout Inventory (MBI) is one of the most recognized and widely used methods for measuring burnout syndrome in employees of various professional groups and industries. This technique was developed by K. Maslach and S. Jackson in 1981 and tested by a large number of studies confirming its reliability and validity). Professional burnout is a serious threat to the well-being of employees and production efficiency. A systematic approach is needed: diagnosis, prevention, support and a culture of mutual respect. Despite a significant amount of research on professional burnout, there are still a number of issues that require further study, including: – study of the long-term consequences of professional burnout for the physical and mental health of workers; – development and testing of new, more effective prevention and intervention programs adapted to the specifics of different industries; – studying the impact of new technologies and automation on the level of professional burnout of workers; – research on the role of leadership and corporate culture in preventing and overcoming burnout at work.

  • Open Access

    Правові та соціально-економічні механізми державного управління безпекою працівників з інвалідністю в контексті міжнародної інтеграції

    by Karyna Danova, Viktoriia Malysheva, Olha Nikitchenko, Hanna Sobolieva, Maryna Ivashchenko

    Мета роботи. Наукове обґрунтування та розроблення інтегрованої моделі оцінювання ефективності правових і соціально-економічних механізмів державного управління охороною праці працівників з інвалідністю з урахуванням міжнародних підходів, вимог цивільної безпеки, готовності до надзвичайних ситуацій і організації домедичної допомоги. Метод дослідження. Системний підхід, методи аналізу та узагальнення наукових джерел, порівняльний аналіз міжнародного досвіду, індикаторний підхід та метод інтегрального оцінювання ефективності державної політики. Результати дослідження. Обґрунтовано необхідність інтеграції правових, соціально-економічних, інституційних і організаційних механізмів реагування в єдину систему державного управління. Запропоновано інтегровану модель оцінювання ефективності, що включає чотири функціональні блоки: правовий, соціально-економічний, інституційний та блок реагування і домедичної допомоги. Розроблено систему індикаторів, методику формування інтегрального показника та шкалу його інтерпретації, що забезпечує можливість кількісної оцінки ефективності державної політики, порівняльного аналізу регіонів і галузей та визначення пріоритетів фінансування заходів інклюзивної безпеки. Теоретична цінність дослідження. Розвиток теоретичних підходів до державного управління охороною праці шляхом обґрунтування концепції інтеграції інклюзивності, реагування на надзвичайні ситуації та домедичної допомоги в єдину систему оцінювання ефективності. Запропонована модель розширює наукові уявлення про системну оцінку результативності державної політики у сфері безпеки праці. Практична цінність дослідження. Запропонований підхід може бути використаний для стратегічного моніторингу ефективності державного управління, удосконалення нормативно-правової бази, підвищення інституційної спроможності органів державного нагляду, обґрунтування інвестицій у заходи безпеки та формування інклюзивного трудового середовища. Цінність дослідження. Створено комплексну модель оцінювання ефективності державної політики, яка вперше системно поєднує правові, соціально-економічні, інституційні та операційні механізми реагування та розглядає домедичну допомогу як структурний компонент державного управління. Обмеження дослідження. Обмеження пов’язані з концептуальним характером моделі, необхідністю її апробації на емпіричних даних різних регіонів і галузей, а також уточнення вагових коефіцієнтів індикаторів у процесі практичного застосування. Тип статті. Емпірична.

  • Open Access

    RISK-BASED APPROACH AND SAFETY MANAGEMENT OF REFRACTORY LINING OF OXYGEN CONVERTERS IN STEEL PRODUCTION

    by S.м. Logvinkov, M.YU. Ivashchenko, O.M. Borysenko, I.A. Ostapenko, М.ю. Іващенко

    The article presents a systematic analysis of the problem of ensuring the reliability and safe operation of the lining of oxygen converters - key units of modern steelmaking. Since the lining is the most loaded element of the converter design, its wear significantly affects the efficiency and safety of the smelting process. Particular attention is paid to the implementation of a risk-based approach to lining condition management, which allows for timely detection of potential threats, implementation of preventive and corrective measures, as well as reducing costs for repair and maintenance of equipment. The principles of functioning of the oxygen converter, typical structural elements of the lining, as well as the main technological parameters that affect its wear are described. The article systematizes the experience of domestic and foreign research on the wear of MgO–C system refractories, selection of slag formers, methods for predicting the residual life of the lining, and hot repair practices. A detailed classifier of lining wear zones is proposed, taking into account their localization in the converter and the causes of premature failure. Action algorithms for steelmakers have been developed depending on the metal level in the converter, which provides personalized risk management in real time. Special attention is paid to hot lining repair technologies that allow avoiding unit shutdowns for cold recovery. The article analyzes the effectiveness of using underwelding refractory briquettes, granules and masses, in particular the latest developments of Druzhkiv Refractory Plant LLC. According to the results of industrial testing, it was established that the use of the developed briquettes allows achieving high performance indicators: up to 110 melts after one repair, increased compressive strength (13–17% higher than analogues), better adhesion and reduced thermal load. Thus, the work proves the effectiveness of integrating risk-based management methods, new materials and innovative repair technologies to ensure stable and safe operation of converter units. The proposed approaches have practical value for metallurgical enterprises, contributing to reducing costs, increasing productivity and preserving the lining resource. The results obtained can be used as a basis for further research and development of complex decision support systems in the field of steelmaking.

  • Open Access

    NEW SAFETY CHALLENGES OF CEMENT-CONTAINING BUILDING MATERIALS AND PRODUCTS FROM THEM

    by S. Logvinkov, M. Ivashchenko, V. Shumeіko, O. Maksimenko

    The article considers a new problem of harmful effects of Portland cement on humans due to the possibility of releasing ammonia during hydration hardening of materials and products based on it. It notes the relationship between the analyzed problem and the intensification of energy and resource saving at modern cement plants, which allows nitrogen-containing materials to enter Portland cement: as part of raw materials; with materials utilized in high-temperature zones of rotary kilns and as part of additives introduced during grinding of cement clinker. Probable sources of ammonia release from Portland cement during its hydration are analyzed in a logical sequence and taking into account the chemical specificity of various groups of nitrogen-containing compounds. The most theoretically substantiated and experimentally confirmed hypothesis is chosen about the synthesis of iron nitrides in high-temperature zones of rotary kilns for burning cement clinker – the main sources of subsequent ammonia emission during hydration of Portland cement. A set of conditions necessary for the synthesis of iron nitrides is considered. The debatable nature of the issue of the stability of stoichiometric iron nitride Fe8N is indicated and it is proposed to consider it as a solid solution along with stoichiometric compounds Fe4N and Fe2N when analyzing chemical processes of hydration with the formation of ammonia. Possible solutions to the problem at the place of its occurrence - Portland cement plants – are discussed. The expediency of depleting sources of ammonia emission at the initial stages of hydration hardening of Portland cement is shown, which significantly reduces the risk of harmful effects on the human body. A method for eliminating the problem at large enterprises consuming Portland cement in significant quantities for the manufacture of dry building mixtures, concrete and products from them is selected. The essence of the method for proactively removing the main amount of ammonia emission sources at the initial stage of Portland cement hydration in the presence of the additive Ca(NO3)2 is described. Theoretical and practical arguments are presented about the positive effect of small amounts of Ca(NO3)2 on the formation of the microstructure and operational characteristics of cement stone, which additionally stimulates the implementation of the proposed method. The need for a comprehensive large-scale study of all possible manifestations of the analyzed problem with the involvement of specialists from sanitary and hygienic services is emphasized.

  • Open Access

    OCCUPATIONAL SAFETY WHEN WORKING WITH ABRASIVE MATERIALS

    by V. Abrakitov, M. Ivashchenko, M. Moroz, O. Nikitchenko

    Foundry is one of the most harmful and dangerous operations in the industry. Research shows that the quality of abrasive materials directly impacts occupational safety. Peeling, metal stripping, grinding, sharpening, lapping, and surface treatment generate abrasive industrial dust. This dust consists of particles of various sizes that float in the work area air and settle slowly. Constant inhalation of industrial dust can lead to occupational diseases such as silicosis, pneumoconiosis, and even cancer. Laboratory tests have shown that fine-grained abrasive grinding wheels remove the same amount of metal at a pressure force of 6 kg as other wheels with a pressure force of 10 kg. In addition, these wheels remove 40% more metal than any of the others with the same pressure force. The dust formed during metal processing with various abrasive materials differs in size due to the ceramic aluminium oxide content (Al2O3). We can draw the following conclusions from the conducted study: The quality of the abrasive material has a direct impact on occupational safety. The use of modern materials in grinding makes it possible to increase the speed of surface treatment by several times (2–3 times), improving labour productivity and reducing the duration of the negative impact of industrial dust on the operator when performing the same amount of work. Modern abrasive materials can lower the concentration of dust in the workplace, make the dust fraction less harmful, reduce the duration of dust exposure to the worker, and increase the worker’s productivity. Controlling industrial dust is an urgent occupational health issue, as many workers can be affected by it. Reducing dust levels in the air of the work area can improve working conditions and mitigate the risk of occupational diseases among employees. It can also lead to economic benefits for the company by reducing the cost of medical treatment and workers’ compensation. The proposed solution helps to decrease dust concentration in the workplace, makes its fraction safer, reduces the employees’ time of exposure to dust, and increases labour productivity. Keywords: abrasive, safety, foundry workers, dust, silicosis, grinding.

  • Open Access

    Effect detection of using a modified Redlich-Kwong-Aungier equation of state on the calculation of carbon dioxide flow in a centrifugal compressor

    by Hanna Vorobiova, Dmytro Dolmatov, Kseniia Fesenko, Iurii Sysoiev, Oleh Dehtiarov, Maryna Ivashchenko

    Supercritical CO2 (S-CO2) cycles have found applications in power generation and can achieve high efficiency in a wide range of temperatures and pressures. The Redlich-Kwong-Aungier real gas equation of state is used to describe the thermodynamic properties of the CO2 working fluid. The main problem in its application lies in modeling the phase transition between different states and the region near the critical point of the working fluid. The object of the study is the working process in a centrifugal compressor located in the compression loop with the CO2 working fluid. The proposed mathematical model of the modified Redlich-Kwong-Aungier equation of state allows for a first-order phase transition from the liquid to the supercritical region even near the critical point. A scaling factor was added to the modified equation of state, significantly reducing the error in pressure determination in a wide range of temperatures compared to the original equation of state. The proposed mathematical model can be applied in the pure liquid region, limited to the temperature range from 220 K to 300 K. The mathematical model was used to solve the 3D gasdynamic problem, specifically to determine the thermodynamic and kinematic properties of the flow in a centrifugal compressor in a wide range of operating modes. A comparison of the calculation results with experimental data from the Sandia National Laboratories (USA) report was conducted. A satisfactory agreement of the results at the design point of the compressor characteristic was obtained (less than 5 % discrepancy). Due to the simplicity of the equation of state and the small number (seven) of empirical coefficients, the obtained mathematical model can be used for practical CFD tasks without significant computational time costs. Надкритичні цикли СО2 (S-CO2) знайшли застосування в енергетиці і можуть досягати високої ефективності у широкому діапазоні температур і тисків. Рівняння стану реального газу Редліха-Квонга-Анг’є використовується для опису термодинамічних параметрів робочої рідини СО2. Найбільшою проблемою при його використанні є моделювання фазового переходу між різними станами та областю критичної точки робочої рідини. Об’єктом дослідження є робочий процес в відцентровому компресорі, розташованому в контурі стиснення з робочою рідиною CO2. Запропонована математична модель модифікованого рівнянні стану Редліха-Квонга-Анг’є дозволяє виконувати фазовий перехід першого роду з рідкої до надкритичної області навіть поблизу критичної точки. В модифіковане рівняння стану додано масштабну поправку, що дозволило значно зменшити похибку у визначенні тиску в широкому діапазоні температур порівняно із вихідним рівнянням стану. Запропонована математична модель може застосовуватись в області чистої рідини, обмеженої діапазоном температур від 220 K до 300 К. Математична модель використана для вирішення аеродинамічної задачі у 3D просторі, зокрема для визначення термодинамічних та кінематичних властивостей потоку у відцентровому компресорі в широкому діапазоні режимів роботи. Проведено співставлення результатів дослідження з експериментом зі звіту Sandia National Laboratories (США). Отримано задовільний збіг результатів у робочій точці характеристики компресора (менше 5 % розбіжності). Завдяки простоті форми рівняння стану та невеликій кількості (сім) емпіричних коефіцієнтів, отримана математична модель може використовуватися для практичних задач обчислювальної гідродинаміки без значних витрат обчислювального часу


  • Open Access

    SAFE PERFORMANCE OF WORKS IN CONSTRUCTION AND HOUSING AND COMMUNAL SERVICES USING THE ORIGINAL SCAFFOLDING DESIGN

    by V. Abrakitov, M. Ivashchenko, M. Moroz, O. Nikitchenko

    Our development relates to construction, namely scaffolding and scaffolding used when working at height. It is intended for fencing the work area when carrying out various types of work, for example, when performing brickwork from scaffolding. In construction, where safety and efficiency play a crucial role, the correct selection and use of scaffolding are integral to every successful project. We have proposed a patent-protected solution. It is a scaffolding railing consisting of vertical support posts hinged with horizontal crossbars, characterised by the fact that each support post is made in the form of a telescopic connection of pipes of different diameters with the possibility of extending them from each other and is fixed with the help of an existing locking device. The hinge connection of horizontal crossbars with them, except the upper row of such bars that are railing, is made in random order, for example, by attaching a hinge to the upper end of the upper tube of the smallest diameter, and is carried out using additional ring elements mounted on the corresponding telescopic connecting tubes. The inner diameter of each of these annular elements, exceeding the outer diameter of the tube on which it is mounted, is less than the outer diameter of the next subordinate telescopic tube. Thus, it can move only vertically in a telescopic connection within this and above pipes. It makes it possible to support each of the ring elements with horizontal crossbars attached to them under their weight at a certain level of height of the vertical support post, determined by the height of the underlying tube of the telescopic connection. At the same time, the lower horizontal crossbar is hinged to the ring element of the largest diameter, put on the lower tube of the telescopic connection, and rested directly on the working flooring made in the form of a sideboard. The proposed device is not technically complex to implement. Its use increases the workers’ productivity, improves the working conditions, and ensures the safety of various construction works. Keywords: safety, construction, ease of use, prototype, fencing, scaffolding.

  • Open Access

    ERGONOMICS AS A SAFETY FACTOR IN THE RAILWAY INDUSTRY

    by M. Vorozhbiian, M. Ivashchenko, O. Skrypnyk, A. Rogozin

    Railway transport is a huge energetic system, the functioning of which is determined by the coordinated work of thousands of employees of various specialties, including dispatchers and locomotive drivers. In the "man-technical system-production environment" system, a person is the "weakest link", determining the reliability and safety of the system's functioning as a whole. Studies show that the driver's work in conditions of high-speed traffic involves a high level of stress on the nervous analyzers, as well as the functions of memory and attention, which leads to their rapid fatigue. The level of fatigue obtained as a result of the work shift is unacceptable for most workers, monitoring the level of functional reliability of the worker can be an effective means of combating accumulated fatigue. The problems of ensuring the normal life of workers in dangerous professions in modern social and industrial conditions are caused primarily by the intense influence of negative social, professional and other factors that cause the development of adverse mental states and overstrain of psychophysiological functions. All this creates stressful situations, both in society in general and for every person. Of course, in addition to the above-mentioned stresses, an important place in the activity of a human operator is occupied by professional stress, which is constantly present. The systemic impact of stress has both an immediate and remote nature. Experimental studies have established that it reduces the level of functional reliability of the "human operator". Such states include, first of all, fatigue, stress and borderline states (between health and illness). Such indicators can be an indicator of high danger of such a relevant phenomenon for the transport industry as sudden ischemic death. A distinction is made between the slow and operational components of performance, while the slow (trend) does not change for a long time (month, years), and the operational (functional state) changes in the form of "peaks", "declines" or a relatively flat "plateau" during hours. It follows from this that in order to maintain the appropriate level of safety of the transport process, it is necessary to implement control of the level of efficiency of railway operators, including its trending part, taking into account the presence of constant stresses today. It is necessary to conduct monitoring as a prediction of early diagnosis of changes in the functional state of operators, and therefore the state of professional reliability. Keywords: safety, ergonomics, diagnostics, professional reliability, level of functional reliability, trend component.

  • Open Access

    ERGONOMICS AS A SAFETY FACTOR IN THE RAILWAY INDUSTRY

    by M. Vorozhbiian, V. Brusentsov, M. Ivashchenko, O. Skrypnyk

    Railway transport is a huge energetic system, the functioning of which is determined by the coordinated work of thousands of employees of various specialties, including dispatchers and locomotive drivers. In the "man-technical system-production environment" system, a person is the "weakest link", determining the reliability and safety of the system's functioning as a whole. Studies show that the driver's work in conditions of high-speed traffic involves a high level of stress on the nervous analyzers, as well as the functions of memory and attention, which leads to their rapid fatigue. The level of fatigue obtained as a result of the work shift is unacceptable for most workers, monitoring the level of functional reliability of the worker can be an effective means of combating accumulated fatigue. The problems of ensuring the normal life of workers in dangerous professions in modern social and industrial conditions are caused primarily by the intense influence of negative social, professional and other factors that cause the development of adverse mental states and overstrain of psychophysiological functions. All this creates stressful situations, both in society in general and for every person. Of course, in addition to the above-mentioned stresses, an important place in the activity of a human operator is occupied by professional stress, which is constantly present. The systemic impact of stress has both an immediate and remote nature. Experimental studies have established that it reduces the level of functional reliability of the "human operator". Such states include, first of all, fatigue, stress and borderline states (between health and illness). Such indicators can be an indicator of high danger of such a relevant phenomenon for the transport industry as sudden ischemic death. A distinction is made between the slow and operational components of performance, while the slow (trend) does not change for a long time (month, years), and the operational (functional state) changes in the form of "peaks", "declines" or a relatively flat "plateau" during hours. It follows from this that in order to maintain the appropriate level of safety of the transport process, it is necessary to implement control of the level of efficiency of railway operators, including its trending part, taking into account the presence of constant stresses today. It is necessary to conduct monitoring as a prediction of early diagnosis of changes in the functional state of operators, and therefore the state of professional reliability. Keywords: safety, ergonomics, diagnostics, professional reliability, level of functional reliability, trend component.

  • Open Access

    ASSESSMENT OF ADMINISTRATIVE UNITS OF THE REGION ACCORDING TO DANGER FACTORS AND TENSION OF THE OPERATIONAL ENVIRONMENT

    by Anatoliy Rogozin, Mykhailo Vorozhbiian, Maryna Ivashchenko

    An approach has been developed to determine the factors that characterize the scope of tasks of the operational-rescue service in the territory and the grouping of administrative-territorial units of the region according to the level of tension of the operational situation. Indicators characterizing the volume of tasks of the operational rescue service were determined by the expert method. The application of this method of the main components will be allowed to determine the factors that adequately describe the level of potential danger of the regions of the region.