Tiehong Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Tiehong Chen has a total of 168 co-authors. Here are the top co-authors by number of shared publications:
Pingchuan Sun
22 shared publicationsRui Chen
Institute of New Catalytic Materials Science, School of Materials Science and Engineering, Nankai Cangzhou Bohai New Area Green Chemical Research Co. LTD
20 shared publications- Pingchuan Sun
Key Laboratory of Functional Polymer Materials of Ministry of Education, Frontiers Science Center for New Organic Matter, College of Chemistry, Nankai University, Tianjin, China
15 shared publications Chengxiang Shi
Institute of New Catalytic Materials Science, School of Materials Science and Engineering, Key Laboratory of Advanced Energy Materials Chemistry (MOE), Nankai University, Tianjin 300350, PR China
12 shared publicationsJin-Gui Wang
Institute of New Catalytic Materials Science, Key Laboratory of Advanced Energy Materials Chemistry (MOE), College of Chemistry, Collaborative Innovation Center of Chemical Science and Engineering (Tianjin), Nankai University, Tianjin 300071, PR China
12 shared publicationsDatong Ding
School of Physics, Nankai University, Tianjin 300071, People's Republic of China
9 shared publications
Latest Publications
- 3 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (10) , 7340-7348
Hydrophobic, Nitrogen-Free Organic Molecule-Protected Alkali Desilication for Hierarchical Zeolites with High Crystallinity and Porosity
Desilication by alkali etching is generally used to prepare hierarchical zeolites to enhance their mass transfer properties; however, for high Si/Al ratio zeolites, the alkali etching would greatly reduce the framework crystallinity or even give rise to amorphous product. Though organic amines have been used as additives during alkali etching to protect the microporous framework, the problems of toxicity, volatility, high cost, and nitrogen-containing wastes induced by organic amines would hinder their scalable application. In this study, we provide a different viewpoint on the protective mechanism of zeolite micropores during alkali etching, and the attention is focused on the framework polarity, which has not been studied before. We develop a hydrophobic nitrogen-free organic molecule (such as acetophenone)-protected alkali etching method to prepare hierarchical zeolites with high crystallinity and high porosity, and the prepared hierarchical Y zeolites showed enhanced performance in the catalytic cracking of bulky molecules. This method is based on the principle that the hydrophobic micropores of high-silica zeolites could adsorb hydrophobic organic molecules from aqueous solution, which would fill in the zeolite micropores and prevent excessive OH- damage to Si-O-Si bonds. Thus, our method is facile for scalable production without the tedious pretreatment of vacuum dehydration, organic amine impregnation, and drying before alkali etching. Furthermore, concerning the characteristics of a nitrogen-free process and low volatility, using acetophenone as a protective agent would reduce the cost and avoid nitrogen-containing wastes in practical applications.
- 3 March 2026
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 42 (10) , 7340-7348
Hydrophobic, Nitrogen-Free Organic Molecule-Protected Alkali Desilication for Hierarchical Zeolites with High Crystallinity and Porosity
Desilication by alkali etching is generally used to prepare hierarchical zeolites to enhance their mass transfer properties; however, for high Si/Al ratio zeolites, the alkali etching would greatly reduce the framework crystallinity or even give rise to amorphous product. Though organic amines have been used as additives during alkali etching to protect the microporous framework, the problems of toxicity, volatility, high cost, and nitrogen-containing wastes induced by organic amines would hinder their scalable application. In this study, we provide a different viewpoint on the protective mechanism of zeolite micropores during alkali etching, and the attention is focused on the framework polarity, which has not been studied before. We develop a hydrophobic nitrogen-free organic molecule (such as acetophenone)-protected alkali etching method to prepare hierarchical zeolites with high crystallinity and high porosity, and the prepared hierarchical Y zeolites showed enhanced performance in the catalytic cracking of bulky molecules. This method is based on the principle that the hydrophobic micropores of high-silica zeolites could adsorb hydrophobic organic molecules from aqueous solution, which would fill in the zeolite micropores and prevent excessive OH- damage to Si-O-Si bonds. Thus, our method is facile for scalable production without the tedious pretreatment of vacuum dehydration, organic amine impregnation, and drying before alkali etching. Furthermore, concerning the characteristics of a nitrogen-free process and low volatility, using acetophenone as a protective agent would reduce the cost and avoid nitrogen-containing wastes in practical applications.
- Open Access
Highly Dispersed Pd Clusters in Zeolite USY for Effective Hydrogenation of Naphthalene
Pd-based catalysts with different Pd species (Pd ions, Pd clusters, and Pd nanoparticles) in USY were synthesized for naphthalene hydrogenation reaction. Among the catalysts, Pd clusters were prepared by controlled aggregation of Pd ions during the hydrogenation reaction with the assistance of physically adsorbed water in zeolite micropore. The coordination state and electronic structure of Pd species on these catalysts were analyzed to reveal the structure–performance relationship. Due to the high dispersion and optimized electronic structure, Pd clusters showed the highest activity for naphthalene hydrogenation compared to Pd ions and Pd nanoparticles.
Open AccessHighly Dispersed Pd Clusters in Zeolite USY for Effective Hydrogenation of Naphthalene
Pd-based catalysts with different Pd species (Pd ions, Pd clusters, and Pd nanoparticles) in USY were synthesized for naphthalene hydrogenation reaction. Among the catalysts, Pd clusters were prepared by controlled aggregation of Pd ions during the hydrogenation reaction with the assistance of physically adsorbed water in zeolite micropore. The coordination state and electronic structure of Pd species on these catalysts were analyzed to reveal the structure–performance relationship. Due to the high dispersion and optimized electronic structure, Pd clusters showed the highest activity for naphthalene hydrogenation compared to Pd ions and Pd nanoparticles.
- 8 August 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (17) , 14682-14692
Rare-Earth-Modified Magnesium Aluminate Spinel-Supported PtSn Nanoparticles for Propane Dehydrogenation
- 8 August 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (17) , 14682-14692
Rare-Earth-Modified Magnesium Aluminate Spinel-Supported PtSn Nanoparticles for Propane Dehydrogenation
- 12 May 2025
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 395
Bimetallic Pt-Pd nanoparticles on hierarchical core-shell zeolite for deep hydrogenation of naphthalene
- 12 May 2025
- Published by Elsevier in Microporous and Mesoporous Materials
- Vol. 395
Bimetallic Pt-Pd nanoparticles on hierarchical core-shell zeolite for deep hydrogenation of naphthalene
- Open Access
- 25 January 2025
- Published by MDPI AG in Inorganics
- Vol. 13 (2) , 37
Hierarchically Porous Titanosilicate Hollow Spheres Containing TS-1 Zeolite Precursors for Oxidative Desulfurization
The environmental and health impacts of sulfur compounds in fuel oil have prompted considerable research interest in oxidative desulfurization (ODS) technology. Tetrahedrally coordinated titanium has been demonstrated to exhibit excellent activity in the context of oxidative desulfurization processes. However, further improving the catalytic property of the tetrahedrally coordinated titanium remains a challenging endeavor. In the context of ODS processes conducted at near room temperatures, the improvement of conversion remains a subject of considerable challenge. In this study, hierarchically porous titanosilicate hollow spheres were synthesized by using TS-1 zeolite precursors as Ti and Si sources to obtain the catalyst with only tetrahedrally coordinated titanium. The synthesized materials were characterized through transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet–visible diffuse reflectance spectroscopy (UV-Vis), and nitrogen adsorption analysis. These techniques confirmed the formation of hollow spherical hierarchically porous structures with Ti species uniformly incorporated in tetrahedral coordination and the presence of five-member rings of TS-1 zeolite. As a result, the hierarchically porous titanosilicate hollow spheres demonstrated excellent catalytic performance in ODS, achieving complete dibenzothiophene (DBT) removal within 15 min and a high turnover frequency (TOF) of up to 123 h−1 at 30 °C.
- 25 January 2025
- Published by MDPI AG in Inorganics
- Vol. 13 (2) , 37
Open AccessHierarchically Porous Titanosilicate Hollow Spheres Containing TS-1 Zeolite Precursors for Oxidative Desulfurization
The environmental and health impacts of sulfur compounds in fuel oil have prompted considerable research interest in oxidative desulfurization (ODS) technology. Tetrahedrally coordinated titanium has been demonstrated to exhibit excellent activity in the context of oxidative desulfurization processes. However, further improving the catalytic property of the tetrahedrally coordinated titanium remains a challenging endeavor. In the context of ODS processes conducted at near room temperatures, the improvement of conversion remains a subject of considerable challenge. In this study, hierarchically porous titanosilicate hollow spheres were synthesized by using TS-1 zeolite precursors as Ti and Si sources to obtain the catalyst with only tetrahedrally coordinated titanium. The synthesized materials were characterized through transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet–visible diffuse reflectance spectroscopy (UV-Vis), and nitrogen adsorption analysis. These techniques confirmed the formation of hollow spherical hierarchically porous structures with Ti species uniformly incorporated in tetrahedral coordination and the presence of five-member rings of TS-1 zeolite. As a result, the hierarchically porous titanosilicate hollow spheres demonstrated excellent catalytic performance in ODS, achieving complete dibenzothiophene (DBT) removal within 15 min and a high turnover frequency (TOF) of up to 123 h−1 at 30 °C.
- 26 June 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (27) , 14016-14026
Synthesis of Ordered Mesoporous Silica with Nonionic Surfactant/Anionic Polyelectrolyte as Template under Near-Neutral pH Conditions
Ordered mesoporous silica is widely used in catalysis, adsorption, and biomedicine, among which SBA-15 (Santa Barbara Amorphous-15) is one of the most widely studied. However, the synthesis of SBA-15 often requires strong acid (hydrochloric acid or sulfuric acid), which will not only corrode industrial equipment but also pollute the environment with the wastewater containing strong acid and halogen (sulfur). Here, we demonstrate a green synthetic strategy for SBA-15 under weakly acidic conditions through an anionic assembly route. With the assistance of poly(acrylic acid) (PAA) and 3-aminopropyltrimethoxysilane (APMS), the pH value of the synthesis system can be increased to 4-5, which is a mild near-neutral condition. In addition, halogen-free synthesis using organic acids is also achieved. The powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and N2 sorption characterizations show that the obtained SBA-15 has good texture properties, with a specific surface area of 430-500 m2/g and ordered 6-8 nm mesopores, which is similar to SBA-15 synthesized in traditional strong acid. This strategy provides a facile and environmentally friendly route for the large-scale production of ordered mesoporous materials.
- 26 June 2024
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 40 (27) , 14016-14026
Synthesis of Ordered Mesoporous Silica with Nonionic Surfactant/Anionic Polyelectrolyte as Template under Near-Neutral pH Conditions
Ordered mesoporous silica is widely used in catalysis, adsorption, and biomedicine, among which SBA-15 (Santa Barbara Amorphous-15) is one of the most widely studied. However, the synthesis of SBA-15 often requires strong acid (hydrochloric acid or sulfuric acid), which will not only corrode industrial equipment but also pollute the environment with the wastewater containing strong acid and halogen (sulfur). Here, we demonstrate a green synthetic strategy for SBA-15 under weakly acidic conditions through an anionic assembly route. With the assistance of poly(acrylic acid) (PAA) and 3-aminopropyltrimethoxysilane (APMS), the pH value of the synthesis system can be increased to 4-5, which is a mild near-neutral condition. In addition, halogen-free synthesis using organic acids is also achieved. The powder X-ray diffraction (XRD), transmission electron microscopy (TEM), and N2 sorption characterizations show that the obtained SBA-15 has good texture properties, with a specific surface area of 430-500 m2/g and ordered 6-8 nm mesopores, which is similar to SBA-15 synthesized in traditional strong acid. This strategy provides a facile and environmentally friendly route for the large-scale production of ordered mesoporous materials.
- 8 December 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (50) , 18366-18379
Amorphous CeOx Islands on Dealuminated Zeolite Beta to Stabilize Pt Nanoparticles as Efficient and Antisintering Catalysts for Propane Dehydrogenation
Pt-based catalysts have been widely used in propane dehydrogenation due to their superior activation of C-H bonds and weak scission of C-C bonds. However, in the process of repeated calcination to remove deposited coke, the active Pt species tend to sinter, resulting in a significant decline in catalytic activity. In this study, amorphous CeOx islands loaded on dealuminated Beta zeolite were prepared via simple wetness impregnation. Then, partially embedded Pt nanoparticles in CeOx islands were obtained after reduction owing to the affinity of CeOx for Pt. In the propane dehydrogenation reaction, Pt/Ce5-SiBeta with a Ce loading of 4.55 wt % and Pt loading of 0.72 wt % exhibited the highest activity and the lowest inactivation constant at 550 °C. More importantly, due to the anchoring effect of CeOx on Pt, the catalytic activity of Pt could be recovered after a simple calcination-reduction regeneration process, avoiding the chlorination treatment for the redispersion of Pt species used in industry. In addition, to improve the selectivity of the Pt/Ce5-SiBeta catalyst, a PtSn/Ce5-SiBeta catalyst with excellent activity, selectivity, and recycling stability has been prepared by introducing Sn into Pt/Ce5-SiBeta. The use of amorphous CeOx islands to improve the sintering resistance of Pt opens up new prospects for the design of stable industrial dehydrogenation catalysts.
- 8 December 2023
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 39 (50) , 18366-18379
Amorphous CeOx Islands on Dealuminated Zeolite Beta to Stabilize Pt Nanoparticles as Efficient and Antisintering Catalysts for Propane Dehydrogenation
Pt-based catalysts have been widely used in propane dehydrogenation due to their superior activation of C-H bonds and weak scission of C-C bonds. However, in the process of repeated calcination to remove deposited coke, the active Pt species tend to sinter, resulting in a significant decline in catalytic activity. In this study, amorphous CeOx islands loaded on dealuminated Beta zeolite were prepared via simple wetness impregnation. Then, partially embedded Pt nanoparticles in CeOx islands were obtained after reduction owing to the affinity of CeOx for Pt. In the propane dehydrogenation reaction, Pt/Ce5-SiBeta with a Ce loading of 4.55 wt % and Pt loading of 0.72 wt % exhibited the highest activity and the lowest inactivation constant at 550 °C. More importantly, due to the anchoring effect of CeOx on Pt, the catalytic activity of Pt could be recovered after a simple calcination-reduction regeneration process, avoiding the chlorination treatment for the redispersion of Pt species used in industry. In addition, to improve the selectivity of the Pt/Ce5-SiBeta catalyst, a PtSn/Ce5-SiBeta catalyst with excellent activity, selectivity, and recycling stability has been prepared by introducing Sn into Pt/Ce5-SiBeta. The use of amorphous CeOx islands to improve the sintering resistance of Pt opens up new prospects for the design of stable industrial dehydrogenation catalysts.
- Open Access
- 1 December 2023
- Published by KEAI Publishing in Green Energy & Environment
- Vol. 8 (6) , 1693-1702
Hierarchically porous Fe/N/S/C nanospheres with high-content of Fe-Nx for enhanced ORR and Zn-air battery performance
- 1 December 2023
- Published by KEAI Publishing in Green Energy & Environment
- Vol. 8 (6) , 1693-1702
Open AccessHierarchically porous Fe/N/S/C nanospheres with high-content of Fe-Nx for enhanced ORR and Zn-air battery performance
- Open Access
Research Progress on Porous Carbon-Based Non-Precious Metal Electrocatalysts
The development of efficient, stable, and economic electrocatalysts are key to the large-scale application of electrochemical energy conversion. Porous carbon-based non-precious metal electrocatalysts are considered to be the most promising materials to replace Pt-based catalysts, which are limited in large-scale applications due to high costs. Because of its high specific surface area and easily regulated structure, a porous carbon matrix is conducive to the dispersion of active sites and mass transfer, showing great potential in electrocatalysis. This review will focus on porous carbon-based non-precious metal electrocatalysts and summarize their new progress, focusing on the synthesis and design of porous carbon matrix, metal-free carbon-based catalysts, non-previous metal monatomic carbon-based catalyst, and non-precious metal nanoparticle carbon-based catalysts. In addition, current challenges and future trends will be discussed for better development of porous carbon-based non-precious metal electrocatalysts.
Open AccessResearch Progress on Porous Carbon-Based Non-Precious Metal Electrocatalysts
The development of efficient, stable, and economic electrocatalysts are key to the large-scale application of electrochemical energy conversion. Porous carbon-based non-precious metal electrocatalysts are considered to be the most promising materials to replace Pt-based catalysts, which are limited in large-scale applications due to high costs. Because of its high specific surface area and easily regulated structure, a porous carbon matrix is conducive to the dispersion of active sites and mass transfer, showing great potential in electrocatalysis. This review will focus on porous carbon-based non-precious metal electrocatalysts and summarize their new progress, focusing on the synthesis and design of porous carbon matrix, metal-free carbon-based catalysts, non-previous metal monatomic carbon-based catalyst, and non-precious metal nanoparticle carbon-based catalysts. In addition, current challenges and future trends will be discussed for better development of porous carbon-based non-precious metal electrocatalysts.
- Open Access
Synthesis of Hierarchically Porous Bioactive Glass and Its Mineralization Activity
Mesoporous bioactive glass is a promising biomaterial for bone tissue engineering due to its good biocompatibility and bioactivity. In this work, we synthesized a hierarchically porous bioactive glass (HPBG) using polyelectrolyte-surfactant mesomorphous complex as template. Through the interaction with silicate oligomers, calcium and phosphorus sources were successfully introduced into the synthesis of hierarchically porous silica, and HPBG with ordered mesoporous and nanoporous structures was obtained. The morphology, pore structure and particle size of HPBG can be controlled by adding block copolymer as co-template or adjusting the synthesis parameters. The ability to induce hydroxyapatite deposition in simulated body fluids (SBF) demonstrated the good in vitro bioactivity of HPBG. Overall, this work provides a general method for the synthesis of hierarchically porous bioactive glasses.
Open AccessSynthesis of Hierarchically Porous Bioactive Glass and Its Mineralization Activity
Mesoporous bioactive glass is a promising biomaterial for bone tissue engineering due to its good biocompatibility and bioactivity. In this work, we synthesized a hierarchically porous bioactive glass (HPBG) using polyelectrolyte-surfactant mesomorphous complex as template. Through the interaction with silicate oligomers, calcium and phosphorus sources were successfully introduced into the synthesis of hierarchically porous silica, and HPBG with ordered mesoporous and nanoporous structures was obtained. The morphology, pore structure and particle size of HPBG can be controlled by adding block copolymer as co-template or adjusting the synthesis parameters. The ability to induce hydroxyapatite deposition in simulated body fluids (SBF) demonstrated the good in vitro bioactivity of HPBG. Overall, this work provides a general method for the synthesis of hierarchically porous bioactive glasses.