ZLZhen Li

Zhen Li

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Zhen Li has a total of 189 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Monte Carlo Informed Modification of Peng–Robinson Equation of State for CO2/Hydrocarbon Mixtures Confined in Nanopores

    by Seyed Milad Hatamlee, Michael Hoepfner, Mahmoud Elmehlawy, Minglei Lu, Zhen Li, Jiaoyan Li

    Understanding the vapor–liquid equilibrium (VLE) and critical behavior of carbon dioxide (CO2) and alkane mixtures under confinement is crucial for optimizing CO2 enhanced oil recovery (EOR) and mitigating greenhouse gas emissions. This study investigates the VLE of CO2/n-heptane and methane/n-heptane binary mixtures confined in amorphous silica pores using Monte Carlo (MC) simulations and a modified Peng–Robinson Equation of State (mEoS). The results show that confinement decreases the bubble point pressure while increasing the dew point pressure for both binary systems. The maximum pressure along the composition-dependent critical locus is also reduced under confinement for both binary systems. To improve predictive accuracy, a temperature-dependent modification to the Peng–Robinson EoS is introduced by parametrizing the model coefficients. These findings establish a quantitative framework for predicting phase behavior of confined hydrocarbon mixtures, with direct implications for subsurface energy and carbon management applications.

  • Enhanced molecular diffusion near a soft fluctuating membrane

    by Ali Mohammadi, Zhen Li, Sophie Marbach, Micheline Abbas

    Particles diffusing near interfaces face anisotropic resistance to motion due to hydrodynamic interactions. While this has been extensively studied near hard interfaces since the works of Lorentz and Brenner, our understanding of diffusion near soft, thermally fluctuating interfaces remains limited. Previous studies have predominantly focused on particles much larger than the molecular scale at which thermal fluctuations become important. In this work, we numerically investigate the dynamics of individual solvent molecules near a thermally fluctuating lipid membrane, a canonical soft interface in biology. We observe that the diffusive motion of solvent molecules near the fluctuating membrane is slightly enhanced compared to a flat rigid interface and significantly more so than near an undulated rigid interface. This enhancement in diffusive motion arises from spontaneous momentum exchanges between the moving membrane and adjacent molecules, promoting mixing. Notably, this dispersion effect overcomes geometric trapping that slows diffusion near the rigid undulated interface. Our analysis reveals that the momentum transfer near the fluctuating membrane is so efficient that it resembles an effective slip boundary condition over a length scale equal to the fluctuation height. These molecular-scale mechanisms differ from those of larger particles, where hydrodynamic memory and elasticity effects can be at play as they relax over timescales comparable to significant diffusive motion. Our findings advance understanding of enhanced diffusive motion and promoted mixing near soft fluctuating membranes involved in diverse biological processes and soft-matter technologies containing natural and model cell membranes.


  • Open Access

    Reconstruction of three-dimensional shapes of normal and disease-related erythrocytes from partial observations using multi-fidelity neural networks

    by Haizhou Wen, He Li, Zhen Li

    Reconstruction of 3D erythrocyte or red blood cell (RBC) morphology from partial observations, such as microscope images, is essential for understanding the physiology of RBC aging and the pathology of various RBC disorders. In this study, we propose a multi-fidelity neural network (MFNN) approach to fuse high-fidelity cross-sections of an RBC, with a morphologically similar low-fidelity reference 3D RBC shape to recover its full 3D surface. The MFNN predictor combines a convolutional neural network trained on low-fidelity reference RBC data with a feedforward neural network that captures nonlinear morphological correlations, and augments training with surface area and volume constraints for regularization in the low-fidelity branch. This approach is theoretically grounded by a topological homeomorphism between a sphere and 3D RBC surfaces, with training data generated by dissipative particle dynamics simulations of stomatocyte-discocyte-echinocyte transformation. Benchmarking across diverse RBC shapes observed in normal and aged populations, our results show that the MFNN predictor can reconstruct complex RBC morphologies with over 95% coordinate accuracy when provided with at least two orthogonal cross-sections. It is observed that informative oblique cross-sections intersecting spicule tips of echinocytes improve both local and global feature reconstruction, highlighting the value of feature-aware sampling. Our study further evaluates the influence of sampling strategies, shape dissimilarity, and noise, showing enhanced robustness under physically constrained training. Altogether, these results demonstrate the capability of MFNN to reconstruct the 3D shape of normal and aged RBCs from partial cross-sections as observed in conventional microscope images, which could facilitate the quantitative analysis of RBC morphological parameters in normal and disease-related RBC samples.

  • Open Access

    Mesoscopic flow simulation to understand the percolation through fine-ground electronic waste particle bed

    by Zachary Diermyer, Yidong Xia, Ahmed Hamed, Jordan Klinger, Vicki Thompson, Zhen Li, Jiaoyan Li


  • Open Access

    Multipath Projection Stereolithography for Three-Dimensional Printing Microfluidic Devices

    by Zachary J. Geffert, Zheng Xiong, Jenna Grutzmacher, Maximilian Wilderman, Ali Mohammadi, Alex Filip, Zhen Li, Pranav Soman

    Although many lab-on-chip applications require inch-sized devices with microscale feature resolution, achieving this via current 3D printing methods remains challenging due to inherent trade-offs between print resolution, design complexity, and build sizes. Inspired by microscopes that can switch objectives to achieve multiscale imaging, we report a new optical printer coined multipath projection stereolithography (MPS) specifically designed for printing microfluidic devices. MPS is designed to switch between high-resolution (1x mode, similar to 10 mu m) and low-resolution (3x mode, similar to 30 mu m) optical paths to generate centimeter-sized constructs (3 x 6 cm) with a feature resolution of similar to 10 mu m. Illumination and projection systems were designed, resin formulations were optimized, and slicing software was integrated with hardware with the goal of ease of use. Using a test case of micromixers, we show that user-defined CAD models can be directly input to an automated slicing software to define printing of low-resolution features via the 3x mode with embedded microscale fins via 1x mode. A new computational model, validated using experimental results, was used to simulate various fin designs, and experiments were conducted to verify simulated mixing efficiencies. New 3D out-of-plane micromixer designs were simulated and tested. To show broad applications of MPS, multichambered chips and microfluidic devices with microtraps were also printed. Overall, MPS can be a new fabrication tool to rapidly print a range of lab-on-chip applications.


  • A single-particle energy-conserving dissipative particle dynamics approach for simulating thermophoresis of nanoparticles in polymer networks

    by Yu Lu, Zhen Li, Jun Song, Guo-Hui Hu

    The transport of nanoparticles in polymer networks has critical implications in biology and medicine, especially through thermophoresis in response to temperature gradients. This study presents a single-particle energy-conserving dissipative particle dynamics (seDPD) method by integrating a single-particle model into the energy-conserving DPD model to simulate the mesoscopic thermophoretic behavior of nanoparticles in polymer matrices. We first validate the newly developed seDPD model through comparisons with analytical solutions for nanoparticle viscosity, thermal diffusivity, and hydrodynamic drag and then demonstrate the effectiveness of the seDPD model in capturing thermophoretic forces induced by temperature gradients. The results show that nanoparticles driven by the Soret forces exhibit unique transport characteristics, such as drift velocity and diffusivity, leading to a significant acceleration of nanoparticle diffusion in the polymer network, which has been known as the giant acceleration of diffusion. Quantifying how nanoparticles move in flexible polymer networks sheds light on the interaction dynamics of nanoparticles within polymer networks, providing insight into nanoparticle behavior in complex environments that could be leveraged in various applications from drug delivery to material design.


  • Open Access

    Characterization of partial wetting by CMAS droplets using multiphase many-body dissipative particle dynamics and data-driven discovery based on PINNs

    by Elham Kiyani, Mahdi Kooshkbaghi, Khemraj Shukla, Rahul Babu Koneru, Zhen Li, Luis Bravo, Anindya Ghoshal, George Em Karniadakis, Mikko Karttunen

    The molten sand that is a mixture of calcia, magnesia, alumina and silicate, known as CMAS, is characterized by its high viscosity, density and surface tension. The unique properties of CMAS make it a challenging material to deal with in high-temperature applications, requiring innovative solutions and materials to prevent its buildup and damage to critical equipment. Here, we use multiphase many-body dissipative particle dynamics simulations to study the wetting dynamics of highly viscous molten CMAS droplets. The simulations are performed in three dimensions, with varying initial droplet sizes and equilibrium contact angles. We propose a parametric ordinary differential equation (ODE) that captures the spreading radius behaviour of the CMAS droplets. The ODE parameters are then identified based on the physics-informed neural network (PINN) framework. Subsequently, the closed-form dependency of parameter values found by the PINN on the initial radii and contact angles are given using symbolic regression. Finally, we employ Bayesian PINNs (B-PINNs) to assess and quantify the uncertainty associated with the discovered parameters. In brief, this study provides insight into spreading dynamics of CMAS droplets by fusing simple parametric ODE modelling and state-of-the-art machine-learning techniques.


  • Open Access

    Bridging scales in multiscale bubble growth dynamics with correlated fluctuations using neural operator learning

    by Minglei Lu, Chensen Lin, Martian Maxey, George Karniadakis, Zhen Li

    The intricate process of bubble growth dynamics involves a broad spectrum of physical phenomena from microscale mechanics of bubble formation to macroscale interplay between bubbles and surrounding thermo-hydrodynamics. Traditional bubble dynamics models including atomistic approaches and continuum-based methods segment the bubble dynamics into distinct scale-specific models. In order to bridge the gap between microscale stochastic fluid models and continuum-based fluid models for bubble dynamics, we develop a composite neural operator model to unify the analysis of nonlinear bubble dynamics across microscale and macroscale regimes by integrating a many-body dissipative particle dynamics (mDPD) model with a continuum-based Rayleigh-Plesset (RP) model through a novel neural network architecture, which consists of a deep operator network for learning the mean behavior of bubble growth subject to pressure variations and a long short-term memory network for learning the statistical features of correlated fluctuations in microscale bubble dynamics. Training and testing data are generated by conducting mDPD and RP simulations for nonlinear bubble dynamics with initial bubble radii ranging from 0.1 to 1.5 micrometers. Results show that the trained composite neural operator model can accurately predict bubble dynamics across scales, with a 99% accuracy for the time evaluation of the bubble radius under varying external pressure while containing correct size-dependent stochastic fluctuations in microscale bubble growth dynamics. The composite neural operator is the first deep learning surrogate for multiscale bubble growth dynamics that can capture correct stochastic fluctuations in microscopic fluid phenomena, which sets a new direction for future research in multiscale fluid dynamics modeling.