LNLaxmana Naik

Laxmana Naik

*This is an algorithmically generated author record based on publicly available information.

Laxmana Naik has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ultrasonication Induced Engineering of Emulsion Stability for Developing Advanced Oleic Acid Microencapsulated Phase Change Material ( PCM ) Systems

    by Naveen Jose, Menon Rekha Ravindra, Heartwin Amaladhas Pushpadass, Monika Sharma, Laxmana N. Naik, Krishnegowda Rajesh, Spoorthy G. Sadashivappa

    The present study investigated the effect of the ultrasonication assisted emulsification process on the stability of the oleic acid‐based‐oil‐in‐water emulsions for developing calcium carbonate based microencapsulated phase change materials (MEPCM). The effects of ultrasonic power, treatment time, and surfactant concentration on particle size, zeta potential, and emulsion stability index (ESI) were optimized using a Taguchi L9 orthogonal array coupled with ANOVA. The optimum conditions (80% ultrasonic power, 10 min treatment time, and 1.5 wt% surfactant concentration) yielded particle size of 174 nm, zeta potential of −36 mV and ESI of 95%. Stable MEPCM were synthesized through in situ precipitation and FTIR, XRD, SEM and EDX analysis confirmed the successful encapsulation of oleic acid within compact shell of CaCO 3 consisting of calcite and vaterite phases. DSC analysis confirmed phase change characteristics retention after encapsulation, with ultrasonication‐treated MEPCM exhibiting melting temperature of 12.9°C and latent heat of fusion of 22.29 J/g. The encapsulated systems showcased moderate encapsulation efficiency (32.56%), and high thermal storage capability (97.95%). Thermal cycling studies revealed excellent thermal reliability with 91.97% latent heat retention after 200 heating–cooling cycles. Ultrasonication‐treated MEPCM displayed lower breakage rate (2.34%), lower leakage rate (1.56%) and higher actual core loading (45.28%) in comparison to untreated samples. Thermal conductivity was significantly enhanced from 0.146 W/m K for pure oleic acid to 1.064 W/m K after encapsulation due to the thermally conductive CaCO 3 shell. The results confirm that ultrasonication assisted emulsion engineering is an effective strategy for developing thermally and structurally stable MEPCM for passive thermal energy storage applications.

  • Fabrication and characterization of electrospun catechins-loaded nanofibres for fortification of milk

    by B. Rajunaik, B. Rajunaik, Magdaline Eljeeva Emerald Franklin, Magdaline Eljeeva Emerald Franklin, B. G. Seethu, B. G. Seethu, Heartwin A. Pushpadass, Heartwin A. Pushpadass, Surendra Nath Battula, Surendra Nath Battula, et al.

    Catechins in their free form are bitter in taste, and undergo deterioration and oxidation during processing and storage that limit their use as nutraceuticals in foods. Therefore, catechins were electrospun using zein as encapsulating polymer into nanofibres at 15, 18 and 21% w/w concentrations, 16, 20 and 24 kV applied voltage and 0.5 and 1.0 mL/h feed rate. The electrospinning conditions were optimized using Taguchi L18 (21 × 32) design. Encapsulation efficiency as high as 92.8% and mean fibre diameter as low as 95.2 nm were obtained at 18% concentration of zein, 0.5 mL/h feed rate and 20 kV applied voltage. Scanning electron and atomic force micrographs revealed that the nanofibres produced at zein concentration of 18% and above were clean and beadfree, with cylindrical morphology and non-porous topography. The hydrodynamic diameter, zeta potential and polydispersity index of catechins-loaded nanofibres at optimized conditions were 172.3 nm, −26.3 mV and 0.15. FTIR spectroscopy and X-ray diffractometry confirmed that catechins were encapsulated within the nanofibres. The catechins got released from loaded nanofibres in a controlled and sustained manner, while their antioxidant property was retained. The physico-chemical and sensory qualities of milk were not affected after fortification with catechins-loaded nanofibres.


  • Casein-Derived Bioactive Peptides: Isolation, Characterization, and Functional Aspects

    by Brunda S. Murthy, Sonia Mor, Laxmana N. Naik, N. Veena, Surendra N. Battula

    Milk is a wholesome food containing proteins, fat, lactose, vitamins, and minerals. Total proteins in bovine milk consist of 80% of casein (CN) and 20% of whey or serum proteins. Apart from nutritional benefits, milk proteins have biological activities and serve as a good source of bioactive peptides (BPs). BPs are food-derived peptides with a specific amino acid sequence of about 3–20 residues that exert physiological benefits in the body besides their nutritional value. BPs are the constituents of primary amino acid (AA) sequences, which are not active within the protein sequence and are released during gastrointestinal (GI) digestion or food processing; these are known to regulate some specific physiological functions in the body. The bio-functionalities exhibited by bio-peptides include anticarcinogenic, antidiabetic, antihypertensive, antioxidative (AO), antimicrobial, antithrombotic, hypo-cholesterolmic, mineral binding, and opioid activities. Due to environmental and lifestyle modifications, the population is more prone to various diseases. While undoubtedly drugs play a significant role in the treatment of such diseases, the BPs from CN would also serve as a good natural 28source either as preventative or therapeutic complements to the drugs. In the last few years, there has been an increased research in the field of BPs due to their health promoting factors. Presently, proteins of milk are considered as the best source of BPs. The synthesis of BPs with high concentration and specific bioactivity poses a great challenge, while using different proteolytic enzymes, their isolation, characterization, and utilization.

  • Open Access

    Fortification of milk with phytosterol and its effect on sensory and physicochemical properties

    by V. Nagarajappa, S.N. Battula, S. Arora, L.N. Naik

    Phytosterols are a group of lipophilic steroid alcohols found in plants, which have been shown to lower cholesterol when supplemented in the diet. A commercial phytosterol preparation was added to milk in the form of an oil-in-water emulsion. For the preparation of an emulsion, diacetyl tartaric acid ester of mono- and diglycerides was used as an emulsifier and butteroil was used as a source of fat. Three emulsion formulations, i.e. A (8% phytosterols), B (10% phytosterols) and C (12% phytosterols), were prepared in which the levels of emulsifier (6.5%) and butteroil (10%) were kept constant, and each emulsion was added to milk at a rate of 5% (w/w). Based on sensory evaluation, B-emulsion formulation was selected for fortification of milk. The phytosterol content of the fortified milk determined by reverse-phase high-performance liquid chromatography was 410.8 mg/100 g. No significant loss in the initial content of phytosterol was observed after 1 week of storage. Sensory and physicochemical analyses indicated that significant differences were not observed between control and fortified milk samples up to 7 days of refrigerated storage. The present study suggests that it is feasible to add phytosterol as a functional ingredient in milk in the form of water-soluble emulsion to enhance health benefits of consumers. Two servings of such fortified milk per day provide almost the entire recommended daily requirement of phytosterol. Phytosterols are a group of lipophilic steroid alcohols found in plants, which have been shown to lower cholesterol when supplemented in the diet. A commercial phytosterol preparation was added to milk in the form of an oil-in-water emulsion. For the preparation of an emulsion, diacetyl tartaric acid ester of mono- and diglycerides was used as an emulsifier and butteroil was used as a source of fat. Three emulsion formulations, i.e. A (8% phytosterols), B (10% phytosterols) and C (12% phytosterols), were prepared in which the levels of emulsifier (6.5%) and butteroil (10%) were kept constant, and each emulsion was added to milk at a rate of 5% (w/w). Based on sensory evaluation, B-emulsion formulation was selected for fortification of milk. The phytosterol content of the fortified milk determined by reverse-phase high-performance liquid chromatography was 410.8 mg/100 g. No significant loss in the initial content of phytosterol was observed after 1 week of storage. Sensory and physicochemical analyses indicated that significant differences were not observed between control and fortified milk samples up to 7 days of refrigerated storage. The present study suggests that it is feasible to add phytosterol as a functional ingredient in milk in the form of water-soluble emulsion to enhance health benefits of consumers. Two servings of such fortified milk per day provide almost the entire recommended daily requirement of phytosterol.


  • Surfactants and fatty alcohol based novel nanovesicles for resveratrol: Process optimization, characterization and evaluation of functional properties in RAW 264.7 macrophage cells

    by Jaya Sravani Vankayala, Surendra Nath Battula, Ruckmani Kandasamy, Gover Antoniraj Mariya, Magdaline Eljeeva Emerald Franklin, Heartwin Amaladhas Pushpadass, Laxmana Naik Naik


  • Rapid screening test for detection of oxytetracycline residues in milk using lateral flow assay

    by Laxmana Naik, Rajan Sharma, Bimlesh Mann, Kiran Lata, Y.S. Rajput, B. Surendra Nath


  • Lateral Flow Assay–Based Rapid Detection of Cephalexin in Milk

    by Kiran Lata, Rajan Sharma, Laxmana Naik, Yudhishthir Singh Rajput, Bimlesh Mann

    A rapid and semiquantitative lateral flow assay has been developed for detection of cephalexin (CFX) in milk. The assay is based on a competitive format using polyclonal antibodies. Antibodies were raised in rabbits against CFX‐keyhole limpet hemocyanin. The specificity of antibodies was ascertained by direct enzyme‐linked immunosorbent assay. The laboratory prepared gold nanoparticles coupled to anti‐CFX antibodies, which competed for free CFX in sample and CFX–bovine serum albumin conjugate on the test line of a lateral flow strip. The control line of the lateral flow strip consisted of species‐specific antibody. The assay was validated with spiked milk samples and involved application of skim milk to the adsorbent pad followed by visualization of red color on test and control lines within 8 min. The lower detection limit of CFX was 30 ppb in milk, which is lower than the Codex prescribed maximum residue limit. The storage stability of the prepared strip was also established.Practical Applications: A simple method for the detection of cephalexin in milk using lateral flow assay has been described. The applicability of polyclonal antibodies in the development of lateral flow assay has been demonstrated. The method is sensitive to detect 30 ppb cephalexin in milk, which is lower than the Codex prescribed maximum residue limit of 100 ppb. This method can be used for preliminary screening of milk samples for the presence of cephalexin residues in milk.