MHMahboubeh Hadadian

Mahboubeh Hadadian

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Mahboubeh Hadadian has a total of 82 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Comparative evaluation of stability and recyclability of readily available encapsulants for perovskite solar cells

    by Helmi Vuorinen, Aapo Poskela, Šimon Jech, Joaquín Valdez García, Rustem Nizamov, Mahboubeh Hadadian, Annukka Santasalo-Aarnio, Kati Miettunen

  • Open Access

    Defects Induced Instability of Perovskite Solar Cells

    by Davoud Dastan, Fariba Tajabadi, Mohammad Sajedi Alvar, Mustafa Kareem, Amirhossein Rahimi, Mahboubeh Hadadian, Mohammad Hatamvand, Zhicheng Shi, Yingxin Chen, Lin Tao, et al.

    Perovskite solar cells (PSCs) have demonstrated remarkable potential for photovoltaics, achieving power conversion efficiencies over 27%. However, their commercialization is still hindered by insufficient operational stability under realistic working conditions, including temperature fluctuations, humidity, and continuous illumination. Consolidated experimental evidence indicates that defects in the perovskite bulk and at the interfaces with electron and hole transport layers play a critical role in initiating degradation processes and performance losses. Mitigating defect formation is therefore essential for stabilizing PSCs. This review highlights defect‐induced instability mechanisms associated with ion migration, lattice distortion, and surface chemistry. Furthermore, we discuss recent physical and chemical passivation strategies that enhance device stability without compromising efficiency.


  • Open Access

    Solvent-based revival of carbon-based perovskite solar cells

    by Elena Sergeyevna Akulenko, Mahboubeh Hadadian, Anna Knol, Simon Jech, Sirius Yli-Paavola, Annukka Santasalo-Aarnio, Kati Miettunen

    Perovskite solar cells (PSCs) combine high efficiency with low-cost processing, but their rapid progress toward commercialization is challenged by insufficient end-of-life strategies. Here we present the proof-of-concept of solvent-based revival of carbon-based PSCs (C-PSCs) using the green solvent γ-Valerolactone (GVL) reaching high revival rates, which requires significantly less energy compared to the production of a new device. With this revival approach, we not only recover the materials but also the structure of the whole devices, including the energy and costs invested in them in the original manufacturing, thus advancing the highest level of resource-efficient recycling within the eco-design concept. Devices subjected to the optimized protocol revived up to 95% of their initial power conversion efficiency, with a stable fill factor (FF) and only modest reductions in photocurrent and open-circuit voltage (Voc). Impedance spectroscopy revealed only a small increase in series and charge-transfer resistances, attributable to interfacial changes of the carbon/perovskite boundary, while scanning electron microscopy confirmed the preservation of the carbon scaffold and successful reinfiltration of the perovskite precursor. Energy return on investment (EROI) analysis further highlighted the sustainability advantage of revival compared to single-use devices. These results establish GVL-assisted revival as a practical first-level recycling strategy for perovskite solar cells.

  • Open Access

    Ecodesign of solar panels mitigating temperature gradients and hotspots

    by Tommi Jokikyyny, Mahboubeh Hadadian, Aapo Poskela, Šimon Jech, Anna Knol, Kati Miettunen

    This study presents an effective encapsulation design based on an inert liquid material that 1) enables easy separation of the module components for reuse and 2) can redistribute heat within the module. Conventional photovoltaic modules rely on crosslinked polymer encapsulants that cause localized overheating and ultimately limit end-of-life recyclability. This contribution focuses on an ecodesign for solar panels based on a liquid dimethylpolysiloxane. This novel encapsulation mitigates temperature gradients and suppresses hotspot formation, one of the challenges in silicon modules. Thermal imaging reveals more uniform heat distribution in liquid-encapsulated cells compared to conventional EVA-based structures, despite similar intrinsic thermal conductivities. These results highlight the critical role of convective and interfacial heat transfer mechanisms, which are absent in solid encapsulation systems. Outdoor testing under harsh Nordic conditions demonstrates stable device performance, confirming that liquid encapsulation can also provide effective environmental protection. Most importantly, the non-crosslinked nature of the encapsulant allows complete module disassembly via a simple approach, preserving material quality for reuse. The material recovery with this encapsulation is shown to be effective and requiring a marginal amount of energy compared to conventional approaches. This liquid encapsulation offers improved thermal regulation, could that extend device lifetime, and enable full end-of-life recyclability.

  • Open Access

    The role of terminal functional groups in molecular passivation of the perovskite/hole-selective layer interface

    by Mahboubeh Hadadian, Thomas W. Gries, G. Krishnamurthy Grandhi, Emil Rosqvist, Rustem Nizamov, Sari Granroth, Paola Vivo, Ronald Österbacka, Jan-Henrik Smått, Antonio Abate, et al.

    The nature of terminal functional groups in passivating agents influences the optoelectronic properties and photovoltaic performance of perovskite solar cells.


  • Open Access

    Combining cellulose substrates and perovskites in sustainable solar cells is possible: a systematic literature review offering realistic solutions

    by Joaquín Valdez García, Mahboubeh Hadadian, Vidushi Aggarwal, Sirius Yli-Paavola, Joice Kaschuk, Riikka Suhonen, Marja Välimäki, Kati Miettunen

    The aim of this article is to provide direction for the advancement of cellulose films as sustainable substrates for perovskite solar cells (PSCs). Cellulose, the most abundant biopolymer on Earth, represents a viable, renewable alternative to glass and synthetic polymers when subjected to appropriate modifications. It can be customized via crosslinking, plasticization, and functionalization to increase flexibility and solvent resistance while decreasing gas permeation, surface roughness, and thermal expansion. The adoption of cellulose can drive transformative changes in PSC processing, facilitating the integration of sustainable electrode materials and greener alternatives to toxic solvents, as well as the replacement of high-temperature treatments. Although the literature contains numerous solutions to specific challenges, these findings are scattered across different fields and must be critically assessed for PSC suitability. In this article, we critically review alternative fabrication methods and form a step-by-step multidisciplinary strategy to alter both cellulose and PSC fabrication protocols for the development of sustainable next-generation solar cells.


  • Open Access

    Spectroscopic Ellipsometry Characterization and Radiative Limit Modeling of Bismuth‐Based Perovskite‐Inspired Absorbers for Indoor Photovoltaics

    by Aleksi Kamppinen, G. Krishnamurthy Grandhi, Mahboubeh Hadadian, Sami Toikkonen, Sirius Yli‐Paavola, Paola Vivo, Kati Miettunen

    Lead‐free bismuth‐based perovskite‐inspired materials (Bi‐PIMs) are emerging as wide bandgap semiconductors for sustainable optoelectronic applications, including indoor photovoltaics (IPVs). Computational modeling is a powerful tool to understand and optimize their device performance. However, device‐relevant thin film optical constants for these absorbers remain scarce, limiting quantitative optical and electrical design. Here, for the first time the optical constants of two promising thin‐film Bi‐PIMs—Cu 2 AgBiI 6 and Cs 3 Bi 2 I 6 Br 3 — are determined using spectroscopic ellipsometry. The applied graded effective medium approximation model is supported by the atomic force microscopy and scanning electron microscopy characterizations of varying film thicknesses. A realistic planar device stack is then simulated under both AM1.5G solar and 1000 lx indoor spectra. Under indoor conditions (1000 lx, 4000 K color temperature), the optical photocurrent limits are ca. 91 µA cm −2 for Cu 2 AgBiI 6 and ca. 32 µA cm −2 for Cs 3 Bi 2 I 6 Br 3 with the corresponding radiative‐limit efficiencies of ca. 42 % and ca. 18 %, respectively. These results reveal a significant optical margin and motivate efforts to suppress nonradiative recombination and improve charge transport. More broadly, the extracted optical constants enable accurate photogeneration estimation for optoelectronic device modeling, providing insights into current performance limitations of Bi‐PIM devices and guiding strategies to overcome them.


  • Open Access

    Simplifying perovskite solar cell fabrication for materials testing: how to use unetched substrates with the aid of a three-dimensionally printed cell holder

    by Joaquín Valdez García, Mahboubeh Hadadian, Rustem Nizamov, Paavo Mäkinen, Noora Lamminen, Paola Vivo, Kati Miettunen

    This work demonstrates that unetched substrates can be reliably used in perovskite solar cell (PSC) fabrication. Chemical etching and laser patterning of the bottom electrodes are time- and resource-consuming processes. In particular, when testing novel conductive substrate materials, such as metallic or bio-based substrates, etching or patterning could be entirely unfeasible or could require significant process optimization. Avoiding these steps could accelerate research on PSCs, yet the literature shows no attempts to override these steps. Here, PSCs were fabricated and characterized using three-dimensionally printed holders with spring-loaded pins. We show that devices made on unetched substrates have, on average, a similar performance to those made on etched substrates (16 ± 1% and 16.0 ± 0.7%, respectively). Our study provides a new strategy for fabricating PSCs, particularly when etching and laser patterning are impractical.


  • Open Access

    Bio‐based materials for solar cells

    by Kati Miettunen, Mahboubeh Hadadian, Joaquín Valdez García, Alicja Lawrynowicz, Elena Akulenko, Orlando J. Rojas, Michael Hummel, Jaana Vapaavuori

    Plant‐based materials are emerging as an alternative to conventional components in advanced energy applications. Among these, energy harvesting from sunlight is highly attractive and, in fact, represents the fastest growing energy technology. This review addresses the broad field of solar cell science since plant‐based components can be utilized in almost all solar technologies, and in certain photovoltaic technologies, they can fulfill most of the roles in photovoltaic devices. There is strengthened recent interest in developing sustainable materials options as well as new functionalities being developed for bio‐based materials. This contribution describes the different options for plant‐derived materials in photovoltaics and discusses their deployment feasibility. We focus on performance, lifetime, and embedded energy, all of which are critical to achieve—economically and sustainably–competitive photovoltaic devices. We address the tendency in the current literature for greenwashing, given that not all plant‐based solutions are environmentally‐sound at the device level. On the other hand, plant‐based materials can offer functionalities that cannot be reached with currently used materials.This article is categorized under: Sustainable Energy > Solar Energy Emerging Technologies > Materials Sustainable Energy > Bioenergy


  • Open Access

    Eco-design for perovskite solar cells to address future waste challenges and recover valuable materials

    by Elena S. Akulenko, Mahboubeh Hadadian, Annukka Santasalo-Aarnio, Kati Miettunen