Daniel Hadraba
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Interests
Daniel Hadraba has a total of 84 co-authors. Here are the top co-authors by number of shared publications:
- Lucie Bacakova
Institute of Physiology of the Czech Academy of Sciences Videnska 1083
7 shared publications Frantisek Lopot
5 shared publications- Karel Jelen
Department of Anatomy and Biomechanics, Charles University, 162 52 Prague, Czech Republic
5 shared publications - Antonin Broz
Department of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Vídeňská 1083, 14220 Prague, Czech Republic
3 shared publications - David Vondrášek
Laboratory of Biomathematics, Institute of Physiology of the Czech Academy of Sciences, Prague 4, Czech Republic
3 shared publications - František Lopot
Department of Designing and Machine Components, Faculty of Mechanical Engineering, Czech Technical University in Prague, Technická 4, Prague 6, 160 00 Dejvice, Czech Republic
3 shared publications
Latest Publications
- Open Access
- 19 January 2026
- Published by Springer Nature in Cellular and Molecular Bioengineering
- Vol. 19 (1) , 111-127
Development of a 3D In Vitro Model of Dupuytren’s Disease as a Platform for Drug Screening
Background: Dupuytren’s disease (DD) is a common fibrotic disorder of the hand, characterized by progressive thickening and contracture of the palmar and digital fascia. Surgical excision remains the primary treatment; however, there are currently no therapies to prevent disease progression or recurrence. This study aims to develop a 3D in vitro model to test novel antifibrotic therapies. The model is based on decellularized pathological DD tissue seeded with patient-derived fibroblasts, capturing the role of both cellular and extracellular matrix components in disease progression. Methods: Fibrotic DD tissues were obtained from surgical excisions, sectioned, and decellularized. In parallel, primary fibroblasts were isolated from patient samples. The decellularized extracellular matrices (dECMs) were characterized with respect to biochemical composition, collagen structure, and mechanical properties. Fibroblasts were seeded onto the dECMs and cultured stepwise to initially promote proliferation, followed by differentiation into myofibroblasts. Secretomes of cells cultivated on the established 3D model were compared to those from conventional 2D cultivations. To evaluate the model´s relevance and effectiveness we tested the antifibrotic drug minoxidil. Results: The dECMs retained the pathological architecture and mechanical properties of native DD tissue, although individual ECM components were reduced after decellularization. Fibroblasts successfully adhered, proliferated, and repopulated the scaffold. The relevance of the 3D model was demonstrated by the presence of myofibroblasts with disease–relevant secretome. The responsiveness to the drug minoxidil was significantly more complex in the 3D model than in conventional 2D cultures. Conclusion: We demonstrated that dECM seeded with DD fibroblasts represents a relevant 3D in vitro model of Dupuytren’s disease. The model enables antifibrotic drug screening, as demonstrated by the testing of minoxidil. Our model provides a reproducible platform also suitable for the investigation of cells and ECM contributions to palmar fascial fibrosis.
- 19 January 2026
- Published by Springer Nature in Cellular and Molecular Bioengineering
- Vol. 19 (1) , 111-127
Open AccessDevelopment of a 3D In Vitro Model of Dupuytren’s Disease as a Platform for Drug Screening
Background: Dupuytren’s disease (DD) is a common fibrotic disorder of the hand, characterized by progressive thickening and contracture of the palmar and digital fascia. Surgical excision remains the primary treatment; however, there are currently no therapies to prevent disease progression or recurrence. This study aims to develop a 3D in vitro model to test novel antifibrotic therapies. The model is based on decellularized pathological DD tissue seeded with patient-derived fibroblasts, capturing the role of both cellular and extracellular matrix components in disease progression. Methods: Fibrotic DD tissues were obtained from surgical excisions, sectioned, and decellularized. In parallel, primary fibroblasts were isolated from patient samples. The decellularized extracellular matrices (dECMs) were characterized with respect to biochemical composition, collagen structure, and mechanical properties. Fibroblasts were seeded onto the dECMs and cultured stepwise to initially promote proliferation, followed by differentiation into myofibroblasts. Secretomes of cells cultivated on the established 3D model were compared to those from conventional 2D cultivations. To evaluate the model´s relevance and effectiveness we tested the antifibrotic drug minoxidil. Results: The dECMs retained the pathological architecture and mechanical properties of native DD tissue, although individual ECM components were reduced after decellularization. Fibroblasts successfully adhered, proliferated, and repopulated the scaffold. The relevance of the 3D model was demonstrated by the presence of myofibroblasts with disease–relevant secretome. The responsiveness to the drug minoxidil was significantly more complex in the 3D model than in conventional 2D cultures. Conclusion: We demonstrated that dECM seeded with DD fibroblasts represents a relevant 3D in vitro model of Dupuytren’s disease. The model enables antifibrotic drug screening, as demonstrated by the testing of minoxidil. Our model provides a reproducible platform also suitable for the investigation of cells and ECM contributions to palmar fascial fibrosis.
- Open Access
- 13 November 2025
- Published by Springer Nature in Molecular Neurobiology
- Vol. 63 (1) , 37
Development of Cellular Energy Metabolism During Differentiation of Human iPSCs into Cortical Neurons
Neuronal differentiation requires extensive metabolic remodeling to support increased energetic and biosynthetic demands. Here, we present an integrated multi-omics and functional characterization of metabolic transitions during early differentiation of human induced pluripotent stem cells (iPSCs) into excitatory cortical neurons using doxycycline-inducible overexpression of neurogenin-2 (NGN2). We analyzed parental iPSCs and induced neurons (iNs) at days 7 and 14 of differentiation, integrating gene expression profiling, label-free quantitative proteomics, high-resolution respirometry, fluorescence lifetime imaging microscopy (FLIM), and 13 C₆-glucose metabolic flux analysis. Our data reveal progressive metabolic remodeling associated with neuronal maturation, including enhanced oxidative phosphorylation, increased mitochondrial content, and respiratory capacity. Proteomic analyses showed upregulation of mitochondrial and antioxidant pathways, while FLIM indicated a progressive increase in enzyme-bound NAD(P)H, consistent with a shift toward oxidative metabolism. Notably, 13 C₆-glucose tracing revealed delayed labeling of the intracellular pool of fully labeled glucose and tricarboxylic acid cycle metabolites, together with enhanced labeling of pentose phosphate pathway intermediates and glutathione in iNs, indicating a shift toward biosynthetic and antioxidant glucose utilization during differentiation. Despite this enhancement in mitochondrial function, differentiated neurons maintained glycolytic activity, suggesting metabolic flexibility. Our results define the first week of differentiation as a critical window of metabolic specialization and establish NGN2-iPSC-derived cortical neurons as a versatile and well-characterized model system for investigating bioenergetic remodeling during early human neurodevelopment. It provides a robust foundation for mechanistic insights and high-throughput evaluation of metabolic pathways relevant to human disease.
- 13 November 2025
- Published by Springer Nature in Molecular Neurobiology
- Vol. 63 (1) , 37
Open AccessDevelopment of Cellular Energy Metabolism During Differentiation of Human iPSCs into Cortical Neurons
Neuronal differentiation requires extensive metabolic remodeling to support increased energetic and biosynthetic demands. Here, we present an integrated multi-omics and functional characterization of metabolic transitions during early differentiation of human induced pluripotent stem cells (iPSCs) into excitatory cortical neurons using doxycycline-inducible overexpression of neurogenin-2 (NGN2). We analyzed parental iPSCs and induced neurons (iNs) at days 7 and 14 of differentiation, integrating gene expression profiling, label-free quantitative proteomics, high-resolution respirometry, fluorescence lifetime imaging microscopy (FLIM), and 13 C₆-glucose metabolic flux analysis. Our data reveal progressive metabolic remodeling associated with neuronal maturation, including enhanced oxidative phosphorylation, increased mitochondrial content, and respiratory capacity. Proteomic analyses showed upregulation of mitochondrial and antioxidant pathways, while FLIM indicated a progressive increase in enzyme-bound NAD(P)H, consistent with a shift toward oxidative metabolism. Notably, 13 C₆-glucose tracing revealed delayed labeling of the intracellular pool of fully labeled glucose and tricarboxylic acid cycle metabolites, together with enhanced labeling of pentose phosphate pathway intermediates and glutathione in iNs, indicating a shift toward biosynthetic and antioxidant glucose utilization during differentiation. Despite this enhancement in mitochondrial function, differentiated neurons maintained glycolytic activity, suggesting metabolic flexibility. Our results define the first week of differentiation as a critical window of metabolic specialization and establish NGN2-iPSC-derived cortical neurons as a versatile and well-characterized model system for investigating bioenergetic remodeling during early human neurodevelopment. It provides a robust foundation for mechanistic insights and high-throughput evaluation of metabolic pathways relevant to human disease.
- Open Access
- 20 December 2022
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 29 (1) , 265-272
Microstructural Analysis of Collagenous Structures in Relapsed Clubfoot Tissue
Talipes equinovarus congenitus (clubfoot) is frequently defined as a stiff, contracted deformity, but few studies have described the tissue from the point of view of the extracellular matrix, and none have quantified its mechanical properties. Several researchers have observed that clubfoot exhibits signs of fibrosis in the medial side of the deformity that are absent in the lateral side. Our study aims to quantify the differences between the medial and lateral side tissue obtained from relapsed clubfoot during surgery in terms of the morphological and mechanical properties of the tissue. Combining methods of optical and atomic force microscopy, our study revealed that the medial side has a higher Young’s modulus, contains more collagen and less adipose tissue and that the collagen fibers propagate at a higher frequency of the crimp pattern after surgical dissection of the tissue. Our study offers a multi-correlative approach that thoroughly investigates the relapsed clubfoot tissue.
- 20 December 2022
- Published by Oxford University Press (OUP) in Microscopy and Microanalysis
- Vol. 29 (1) , 265-272
Open AccessMicrostructural Analysis of Collagenous Structures in Relapsed Clubfoot Tissue
Talipes equinovarus congenitus (clubfoot) is frequently defined as a stiff, contracted deformity, but few studies have described the tissue from the point of view of the extracellular matrix, and none have quantified its mechanical properties. Several researchers have observed that clubfoot exhibits signs of fibrosis in the medial side of the deformity that are absent in the lateral side. Our study aims to quantify the differences between the medial and lateral side tissue obtained from relapsed clubfoot during surgery in terms of the morphological and mechanical properties of the tissue. Combining methods of optical and atomic force microscopy, our study revealed that the medial side has a higher Young’s modulus, contains more collagen and less adipose tissue and that the collagen fibers propagate at a higher frequency of the crimp pattern after surgical dissection of the tissue. Our study offers a multi-correlative approach that thoroughly investigates the relapsed clubfoot tissue.
- Open Access
Influence of Biomimetically Mineralized Collagen Scaffolds on Bone Cell Proliferation and Immune Activation
Collagen, as the main component of connective tissue, is frequently used in various tissue engineering applications. In this study, porous sponge-like collagen scaffolds were prepared by freeze-drying and were then mineralized in a simulated body fluid. The mechanical stability was similar in both types of scaffolds, but the mineralized scaffolds (MCS) contained significantly more calcium, magnesium and phosphorus than the unmineralized scaffolds (UCS). Although the MCS contained a lower percentage (~32.5%) of pores suitable for cell ingrowth (113–357 μm in diameter) than the UCS (~70%), the number of human-osteoblast-like MG-63 cells on days 1, 3 and 7 after seeding was higher on MCS than on UCS, and the cells penetrated deeper into the MCS. The cell growth in extracts prepared by eluting the scaffolds for 7 days in a cell culture medium was also markedly higher in the MCS extracts, as indicated by real-time monitoring in the sensory xCELLigence system for 7 days. From this point of view, MCS are more promising for bone tissue engineering than UCS. However, MCS evoked a more pronounced inflammatory response than UCS, as indicated by the production of tumor necrosis factor-alpha (TNF-α) in macrophage-like RAW 264.7 cells in cultures on these scaffolds.
Open AccessInfluence of Biomimetically Mineralized Collagen Scaffolds on Bone Cell Proliferation and Immune Activation
Collagen, as the main component of connective tissue, is frequently used in various tissue engineering applications. In this study, porous sponge-like collagen scaffolds were prepared by freeze-drying and were then mineralized in a simulated body fluid. The mechanical stability was similar in both types of scaffolds, but the mineralized scaffolds (MCS) contained significantly more calcium, magnesium and phosphorus than the unmineralized scaffolds (UCS). Although the MCS contained a lower percentage (~32.5%) of pores suitable for cell ingrowth (113–357 μm in diameter) than the UCS (~70%), the number of human-osteoblast-like MG-63 cells on days 1, 3 and 7 after seeding was higher on MCS than on UCS, and the cells penetrated deeper into the MCS. The cell growth in extracts prepared by eluting the scaffolds for 7 days in a cell culture medium was also markedly higher in the MCS extracts, as indicated by real-time monitoring in the sensory xCELLigence system for 7 days. From this point of view, MCS are more promising for bone tissue engineering than UCS. However, MCS evoked a more pronounced inflammatory response than UCS, as indicated by the production of tumor necrosis factor-alpha (TNF-α) in macrophage-like RAW 264.7 cells in cultures on these scaffolds.
- Open Access
- 24 November 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (23) , 11150
Gearbox Mechanical Efficiency Determination by Strain Gauges Direct Application
This article describes a unique method of measuring the efficiency of gearboxes using foil strain gauges, which allows maintaining the current configuration of the gearbox within the overall assembly of the machine and its functional condition. The presented method is applicable to gearboxes located in the original equipment assembly without the need to use a test rig. Using foil strain gauges, the torque at the input and output of the gearbox is detected. Therefore, the accuracy of torque measurement is key. The crucial step is the calibration of the instrumentation to the given application conditions, which, in this case, is ensured by a virtual calibration using a very accurate FEM analysis. The accuracy of the position of strain gauges and virtual calibration of measurements generate inaccuracies affecting the resulting uncertainty of the determined efficiency. The present article shows, on the example of several measurements, that when using 24-bit converters, after processing the obtained data, mechanical stress with a sensitivity better than hundredths of an MPa can be reliably detected even without signal amplification from strain gauges. It follows that the efficiency is determined with an accuracy of better than low units of tenths.
- 24 November 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (23) , 11150
Open AccessGearbox Mechanical Efficiency Determination by Strain Gauges Direct Application
This article describes a unique method of measuring the efficiency of gearboxes using foil strain gauges, which allows maintaining the current configuration of the gearbox within the overall assembly of the machine and its functional condition. The presented method is applicable to gearboxes located in the original equipment assembly without the need to use a test rig. Using foil strain gauges, the torque at the input and output of the gearbox is detected. Therefore, the accuracy of torque measurement is key. The crucial step is the calibration of the instrumentation to the given application conditions, which, in this case, is ensured by a virtual calibration using a very accurate FEM analysis. The accuracy of the position of strain gauges and virtual calibration of measurements generate inaccuracies affecting the resulting uncertainty of the determined efficiency. The present article shows, on the example of several measurements, that when using 24-bit converters, after processing the obtained data, mechanical stress with a sensitivity better than hundredths of an MPa can be reliably detected even without signal amplification from strain gauges. It follows that the efficiency is determined with an accuracy of better than low units of tenths.
- Open Access
- 16 July 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (14) , 6535
Detection of Respiratory Phases in a Breath Sound and Their Subsequent Utilization in a Diagnosis
Detection of lung sounds and their propagation is a powerful tool for analysing the behaviour of the respiratory system. A common approach to detect the respiratory sounds is lung auscultation, however, this method has significant limitations including low sensitivity of human ear or ambient background noise. This article targets the major limitations of lung auscultation and presents a new approach to analyse the respiratory sounds and visualise them together with the respiratory phases. The respiratory sounds from 41 patients were recorded and filtered to eliminate the ambient noise and noise artefacts. The filtered signal is processed to identify the respiratory phases. The article also contains an approach for removing the noise that is very difficult to filter but the removal is crucial for identifying the respiratory phases. Finally, the respiratory phases are overlaid with the frequency spectrum which simplifies the orientation in the recording and additionally offers the information on the inter-individual ratio of the inhalation and exhalation phases. Such interpretation provides a powerful tool for further analysis of lung sounds, simplifythe diagnosis of various types of respiratory tract dysfunctions, and returns data which are comparable among the patients.
- 16 July 2021
- Published by MDPI AG in Applied Sciences
- Vol. 11 (14) , 6535
Open AccessDetection of Respiratory Phases in a Breath Sound and Their Subsequent Utilization in a Diagnosis
Detection of lung sounds and their propagation is a powerful tool for analysing the behaviour of the respiratory system. A common approach to detect the respiratory sounds is lung auscultation, however, this method has significant limitations including low sensitivity of human ear or ambient background noise. This article targets the major limitations of lung auscultation and presents a new approach to analyse the respiratory sounds and visualise them together with the respiratory phases. The respiratory sounds from 41 patients were recorded and filtered to eliminate the ambient noise and noise artefacts. The filtered signal is processed to identify the respiratory phases. The article also contains an approach for removing the noise that is very difficult to filter but the removal is crucial for identifying the respiratory phases. Finally, the respiratory phases are overlaid with the frequency spectrum which simplifies the orientation in the recording and additionally offers the information on the inter-individual ratio of the inhalation and exhalation phases. Such interpretation provides a powerful tool for further analysis of lung sounds, simplifythe diagnosis of various types of respiratory tract dysfunctions, and returns data which are comparable among the patients.
- 24 February 2021
- Published by IOP Publishing in Biomedical Materials
- Vol. 16 (2) , 025024
Accelerated in vitro recellularization of decellularized porcine pericardium for cardiovascular grafts
An ideal decellularized allogenic or xenogeneic cardiovascular graft should be capable of preventing thrombus formation after implantation. The antithrombogenicity of the graft is ensured by a confluent endothelial cell layer formed on its surface. Later repopulation and remodeling of the scaffold by the patient’s cells should result in the formation of living autologous tissue. In the work presented here, decellularized porcine pericardium scaffolds were modified by growing a fibrin mesh on the surface and inside the scaffolds, and by attaching heparin and human vascular endothelial growth factor (VEGF) to this mesh. Then the scaffolds were seeded with human adipose tissue-derived stem cells (ASCs). While the ASCs grew only on the surface of the decellularized pericardium, the fibrin-modified scaffolds were entirely repopulated in 28 d, and the scaffolds modified with fibrin, heparin and VEGF were already repopulated within 6 d. Label free mass spectrometry revealed fibronectin, collagens, and other extracellular matrix proteins produced by ASCs during recellularization. Thin layers of human umbilical endothelial cells were formed within 4 d after the cells were seeded on the surfaces of the scaffold, which had previously been seeded with ASCs. The results indicate that an artificial tissue prepared by in vitro recellularization and remodeling of decellularized non-autologous pericardium with autologous ASCs seems to be a promising candidate for cardiovascular grafts capable of accelerating in situ endothelialization. ASCs resemble the valve interstitial cells present in heart valves. An advantage of this approach is that ASCs can easily be collected from the patient by liposuction.
- 24 February 2021
- Published by IOP Publishing in Biomedical Materials
- Vol. 16 (2) , 025024
Accelerated in vitro recellularization of decellularized porcine pericardium for cardiovascular grafts
An ideal decellularized allogenic or xenogeneic cardiovascular graft should be capable of preventing thrombus formation after implantation. The antithrombogenicity of the graft is ensured by a confluent endothelial cell layer formed on its surface. Later repopulation and remodeling of the scaffold by the patient’s cells should result in the formation of living autologous tissue. In the work presented here, decellularized porcine pericardium scaffolds were modified by growing a fibrin mesh on the surface and inside the scaffolds, and by attaching heparin and human vascular endothelial growth factor (VEGF) to this mesh. Then the scaffolds were seeded with human adipose tissue-derived stem cells (ASCs). While the ASCs grew only on the surface of the decellularized pericardium, the fibrin-modified scaffolds were entirely repopulated in 28 d, and the scaffolds modified with fibrin, heparin and VEGF were already repopulated within 6 d. Label free mass spectrometry revealed fibronectin, collagens, and other extracellular matrix proteins produced by ASCs during recellularization. Thin layers of human umbilical endothelial cells were formed within 4 d after the cells were seeded on the surfaces of the scaffold, which had previously been seeded with ASCs. The results indicate that an artificial tissue prepared by in vitro recellularization and remodeling of decellularized non-autologous pericardium with autologous ASCs seems to be a promising candidate for cardiovascular grafts capable of accelerating in situ endothelialization. ASCs resemble the valve interstitial cells present in heart valves. An advantage of this approach is that ASCs can easily be collected from the patient by liposuction.
- Open Access
- 1 September 2019
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 14, 7215-7216
A two-layer skin construct consisting of a collagen hydrogel reinforced by a fibrin-coated polylactide nanofibrous membrane [Corrigendum]
A two-layer skin construct consisting of a collagen hydrogel reinforced by a fibrin-coated polylactide nanofibrous membrane [Corrigendum] Bacakova M, Pajorova J, Broz A, et al. Int J Nanomedicine. 2019;14:5033–5050.On page 5047, the grant funding, namely the sentences “MB, JP, AB, VJ and LB received grants from the Grant Agency of the Czech Republic (grant No. 17-0244S). JP received a grant from the Grant Agency of Charles University in Prague (grant No. 756218). AZ and LV received funding from the project ‘Fighting Infectious Diseases’, awarded by the MEYS CR, financed from EFRR (grant No. CZ.02.1.01/0.0/0.0/16_019/0000787).MB received a postdoctoral fellowship awarded by the Czech Academy of Sciences (reg. No. L200111752)” are included in the Disclosure section, and not in the Acknowledgement, as in the original version of the manuscript. Read the original article
- 1 September 2019
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 14, 7215-7216
Open AccessA two-layer skin construct consisting of a collagen hydrogel reinforced by a fibrin-coated polylactide nanofibrous membrane [Corrigendum]
A two-layer skin construct consisting of a collagen hydrogel reinforced by a fibrin-coated polylactide nanofibrous membrane [Corrigendum] Bacakova M, Pajorova J, Broz A, et al. Int J Nanomedicine. 2019;14:5033–5050.On page 5047, the grant funding, namely the sentences “MB, JP, AB, VJ and LB received grants from the Grant Agency of the Czech Republic (grant No. 17-0244S). JP received a grant from the Grant Agency of Charles University in Prague (grant No. 756218). AZ and LV received funding from the project ‘Fighting Infectious Diseases’, awarded by the MEYS CR, financed from EFRR (grant No. CZ.02.1.01/0.0/0.0/16_019/0000787).MB received a postdoctoral fellowship awarded by the Czech Academy of Sciences (reg. No. L200111752)” are included in the Disclosure section, and not in the Acknowledgement, as in the original version of the manuscript. Read the original article
- Open Access
- 1 July 2019
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 14, 5033-5050
A two-layer skin construct consisting of a collagen hydrogel reinforced by a fibrin-coated polylactide nanofibrous membrane
Background: Repairs to deep skin wounds continue to be a difficult issue in clinical practice. A promising approach is to fabricate full-thickness skin substitutes with functions closely similar to those of the natural tissue. For many years, a three-dimensional (3D) collagen hydrogel has been considered to provide a physiological 3D environment for co-cultivation of skin fibroblasts and keratinocytes. This collagen hydrogel is frequently used for fabricating tissue-engineered skin analogues with fibroblasts embedded inside the hydrogel and keratinocytes cultivated on its surface. Despite its unique biological properties, the collagen hydrogel has insufficient stiffness, with a tendency to collapse under the traction forces generated by the embedded cells. Methods: The aim of our study was to develop a two-layer skin construct consisting of a collagen hydrogel reinforced by a nanofibrous poly-L-lactide (PLLA) membrane pre-seeded with fibroblasts. The attractiveness of the membrane for dermal fibroblasts was enhanced by coating it with a thin nanofibrous fibrin mesh. Results: The fibrin mesh promoted the adhesion, proliferation and migration of the fibroblasts upwards into the collagen hydrogel. Moreover, the fibroblasts spontaneously migrating into the collagen hydrogel showed a lower tendency to contract and shrink the hydrogel by their traction forces. The surface of the collagen was seeded with human dermal keratinocytes. The keratinocytes were able to form a basal layer of highly mitotically-active cells, and a suprabasal layer. Conclusion: The two-layer skin construct based on collagen hydrogel with spontaneously immigrated fibroblasts and reinforced by a fibrin-coated nanofibrous membrane seems to be promising for the construction of full-thickness skin substitute.
- 1 July 2019
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 14, 5033-5050
Open AccessA two-layer skin construct consisting of a collagen hydrogel reinforced by a fibrin-coated polylactide nanofibrous membrane
Background: Repairs to deep skin wounds continue to be a difficult issue in clinical practice. A promising approach is to fabricate full-thickness skin substitutes with functions closely similar to those of the natural tissue. For many years, a three-dimensional (3D) collagen hydrogel has been considered to provide a physiological 3D environment for co-cultivation of skin fibroblasts and keratinocytes. This collagen hydrogel is frequently used for fabricating tissue-engineered skin analogues with fibroblasts embedded inside the hydrogel and keratinocytes cultivated on its surface. Despite its unique biological properties, the collagen hydrogel has insufficient stiffness, with a tendency to collapse under the traction forces generated by the embedded cells. Methods: The aim of our study was to develop a two-layer skin construct consisting of a collagen hydrogel reinforced by a nanofibrous poly-L-lactide (PLLA) membrane pre-seeded with fibroblasts. The attractiveness of the membrane for dermal fibroblasts was enhanced by coating it with a thin nanofibrous fibrin mesh. Results: The fibrin mesh promoted the adhesion, proliferation and migration of the fibroblasts upwards into the collagen hydrogel. Moreover, the fibroblasts spontaneously migrating into the collagen hydrogel showed a lower tendency to contract and shrink the hydrogel by their traction forces. The surface of the collagen was seeded with human dermal keratinocytes. The keratinocytes were able to form a basal layer of highly mitotically-active cells, and a suprabasal layer. Conclusion: The two-layer skin construct based on collagen hydrogel with spontaneously immigrated fibroblasts and reinforced by a fibrin-coated nanofibrous membrane seems to be promising for the construction of full-thickness skin substitute.
- Open Access
- 1 June 2018
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 13, 3367-3380
Morphology of a fibrin nanocoating influences dermal fibroblast behavior
Background: Our study focuses on the fabrication of appropriate scaffolds for skin wound healing. This research brings valuable insights into the molecular mechanisms of adhesion, proliferation, and control of cell behavior through the extracellular matrix represented by synthetic biodegradable nanofibrous membranes coated by biomolecules. Methods: Nanofibrous polylactic acid (PLA) membranes were prepared by a needle-less electrospinning technology. These membranes were coated with fibrin according to two preparation protocols, and additionally they were coated with fibronectin in order to increase the cell affinity for colonizing the PLA membranes. The adhesion, growth, and extracellular matrix protein production of neonatal human dermal fibroblasts were evaluated on the nanofibrous membranes. Results: Our results showed that fibrin-coated membranes improved the adhesion and proliferation of human dermal fibroblasts. The morphology of the fibrin nanocoating seems to be crucial for the adhesion of fibroblasts, and consequently for their phenotypic maturation. Fibrin either covered the individual fibers in the membrane (F1 nanocoating), or covered the individual fibers and also formed a fine homogeneous nanofibrous mesh on the surface of the membrane (F2 nanocoating), depending on the mode of fibrin preparation. The fibroblasts on the membranes with the F1 nanocoating remained in their typical spindle-like shape. However, the cells on the F2 nanocoating were spread mostly in a polygon-like shape, and their proliferation was significantly higher. Fibronectin formed an additional mesh attached to the surface of the fibrin mesh, and further enhanced the cell adhesion and growth. The relative gene expression and protein production of collagen I and fibronectin were higher on the F2 nanocoating than on the F1 nanocoating. Conclusion: A PLA membrane coated with a homogeneous fibrin mesh seems to be promising for the construction of temporary full-thickness skin tissue substitutes.
- 1 June 2018
- Published by Taylor & Francis in International Journal of Nanomedicine
- Vol. ume 13, 3367-3380
Open AccessMorphology of a fibrin nanocoating influences dermal fibroblast behavior
Background: Our study focuses on the fabrication of appropriate scaffolds for skin wound healing. This research brings valuable insights into the molecular mechanisms of adhesion, proliferation, and control of cell behavior through the extracellular matrix represented by synthetic biodegradable nanofibrous membranes coated by biomolecules. Methods: Nanofibrous polylactic acid (PLA) membranes were prepared by a needle-less electrospinning technology. These membranes were coated with fibrin according to two preparation protocols, and additionally they were coated with fibronectin in order to increase the cell affinity for colonizing the PLA membranes. The adhesion, growth, and extracellular matrix protein production of neonatal human dermal fibroblasts were evaluated on the nanofibrous membranes. Results: Our results showed that fibrin-coated membranes improved the adhesion and proliferation of human dermal fibroblasts. The morphology of the fibrin nanocoating seems to be crucial for the adhesion of fibroblasts, and consequently for their phenotypic maturation. Fibrin either covered the individual fibers in the membrane (F1 nanocoating), or covered the individual fibers and also formed a fine homogeneous nanofibrous mesh on the surface of the membrane (F2 nanocoating), depending on the mode of fibrin preparation. The fibroblasts on the membranes with the F1 nanocoating remained in their typical spindle-like shape. However, the cells on the F2 nanocoating were spread mostly in a polygon-like shape, and their proliferation was significantly higher. Fibronectin formed an additional mesh attached to the surface of the fibrin mesh, and further enhanced the cell adhesion and growth. The relative gene expression and protein production of collagen I and fibronectin were higher on the F2 nanocoating than on the F1 nanocoating. Conclusion: A PLA membrane coated with a homogeneous fibrin mesh seems to be promising for the construction of temporary full-thickness skin tissue substitutes.