Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Ikenna D. Uwanuakwa has a total of 51 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modeling, Dynamic Simulation, and Optimization of a Renewable Energy-Based Hybrid Building Energy System Incorporating Photovoltaic/Thermal Collectors, Wind Turbine, and Energy Storage: A Case Study for Antalya, Turkey

    by Oluwaponmile David Alao, Maaz Akhtar, Muhammad Abid, Ali Shefik, Mustafa Dagbasi, Aminu Musa Garba, Naser A. Alsaleh, Ikenna D. Uwanuakwa

    This paper examines the potential of solar and wind energy-based hybrid energy systems for residential applications using the meteorological data for Antalya, Turkey. To this end, a Hybrid Renewable Energy System (HRES) is designed to provide electricity, cooling, space heating, and domestic hot water to meet the energy requirements of a residential building in a remote area of Antalya. TRNSYS software is employed in the performance analysis of the system. The key findings of this study indicate that the proposed HRES is able to offer a technically dependable and economically viable energy system for residential applications through the generation of environmentally friendly and sustainable energy outputs. The HRES generated annual thermal, cooling, and electrical energy of 6916.652 kWh, 3027.083 kWh, and 2730.489 kWh, respectively. System economic analysis and optimization is also carried out to ensure the cost-effectiveness and robustness of the system. The Levelized Cost of Energy (LCOE) is found to be 0.237 USD/kWh. Multi-objective PSO optimization performed gave a CAPEX and LCOE reduction of 16.1% and 35%, respectively. This study therefore addresses the limited integrated modeling, optimization, and reliability assessment of off-grid solar–wind residential multigeneration systems under Antalya’s Mediterranean climatic conditions, and it shows the potential of the HRES to save a total of 78,500 kg CO2 emissions throughout its lifetime. These research results reveal the reliability and cost-effectiveness of the proposed renewable energy system for residential applications in Turkey.

  • Open Access

    Scaling Exponents and Range-compatible Function Spaces for gCLM Self-Similar Profiles

    by Ikenna D. Uwanuakwa

    Scaling. The temporal exponent is forced, 𝑐 𝜔 =-1, for every advection parameter 𝑎. Under nondegenerate outer matching, the real-line far-field exponent satisfies 𝛾𝑐 𝑙 = 1. The principal transport block has the same homogeneous exponent. Under explicit decay assumptions on both a perturbation and its Hilbert transform, and in the restricted range 0 < 𝜎 < 𝛾 + 1, the remaining terms in the full linearisation are lower order; in particular, the candidate branch 𝜎 = 𝛾 = 1 𝛽 is self-consistent. This is a restricted sufficient criterion, not a complete indicial theorem. Spaces. We prove a general surjectivity obstruction for injective radii-polynomial preconditioners and analyse the quotient space 𝒮 𝑟 = sin(𝑞) 𝐻 𝑒𝑣𝑒𝑛 𝑟. For 3 2 < 𝑡 < 2, division by sin 𝑞 maps 𝐻 𝑜𝑑𝑑 𝑡 boundedly into 𝐻 𝑒𝑣𝑒𝑛 𝑡-1 , and the normalized stationary gCLM map takes values in ℝ × 𝒮 𝑡-1. We realize the principal transport operator on a graph domain, give its exact 𝐶 0 Green formula, distinguish the 𝐶 0 and Hölder ranges at 𝛽 = 1, and obtain a Sobolev inverse bound for 0 < 𝛽 < 2 3. We also analyse a cutoff-free endpoint carrier whose sine coefficients are explicit. Measurements. Under an explicit Fourier remainder hypothesis, an endpoint branch outside the terminating positive-odd-integer cases has coefficients of order 𝑛-𝛾-1 , with uniform and mean-square truncation rates 𝑁-𝛾 and 𝑁-𝛾-1 2. A two-point log-log fit has a computable leading bias, and the robustness of a zero-crossing observable is governed to first order by the crossing slope. No radii-polynomial certificate is claimed.

  • Open Access

    Hybrid BRR–MLP–CatBoost model with interpretable approaches for predicting industrial energy consumption: a case study of South Africa, Egypt, and Morocco

    by Abdullahi Mohamud Adam, Ikenna D. Uwanuakwa, Ahmed Abdi Hassan, Abdinasir Mohamed Yusuf, Omar Aweis Ali

  • Open Access

    Evaluations on the Properties of Polymer and Nanomaterials Modified Bitumen Under Different Aging Conditions

    by Shaban Ismael Albrka Ali, Khalifa Salem Gallouz, Ikenna D. Uwanuakwa, Mustafa Alas, Mohd Rosli Mohd Hasan

    This research evaluates the rheological and mechanical properties of polymer- and nanomaterials-modified bitumen by incorporating nanosilica (NSA), nanoclay (NCY), and Acrylonitrile Styrene Acrylate (ASA) at 5% by weight of the bitumen. The samples were prepared at 165 °C for one hour to obtain homogeneous blends. All samples were subjected to short- and long-term aging to simulate the effects of different operating conditions. The research conducted a series of tests, including consistency, frequency sweep, and multiple creep stress and recovery (MSCR) using the dynamic shear rheometer (DSR) and bending beam rheometer (BBR). The results showed that all modified bitumen outperformed the neat bitumen. The frequency sweep showed a higher complex modulus (G*) and lower phase angle (δ), indicating enhanced viscoelastic properties and, thus, higher resistance to permanent deformation. The BBR test revealed that the bitumen modified with NCY5% has a creep stiffness of 47.13 MPa, a 51.5% improvement compared to the neat bitumen, while the NSA5% has the highest m-value, a 28.5% enhancement compared with the neat bitumen. The MSCR showed that the modified blends have better recovery properties and, therefore, better resistance to permanent deformation under repeated loadings. The aging index demonstrated that the modified bitumen is less vulnerable to aging and maintains their good flexibility and resistance to permanent deformations. Finally, these results showed that adding 5% polymer and nanomaterials improved the bitumen’s’ performance before and after aging by reducing permanent deformation and enhancing crack resistance at low temperatures, thus extending the pavement service life and making them an effective alternative for improving pavement performance in various climatic conditions and under high traffic loads.


  • Open Access

    Report of RILEM TC 281-CCC: insights into factors affecting the carbonation rate of concrete with SCMs revealed from data mining and machine learning approaches

    by A. Vollpracht, G. J. G. Gluth, B. Rogiers, I. D. Uwanuakwa, Q. T. Phung, Y. Villagran Zaccardi, C. Thiel, H. Vanoutrive, J. M. Etcheverry, E. Gruyaert, et al.

    The RILEM TC 281–CCC ‘‘Carbonation of concrete with supplementary cementitious materials’’ conducted a study on the effects of supplementary cementitious materials (SCMs) on the carbonation rate of blended cement concretes and mortars. In this context, a comprehensive database has been established, consisting of 1044 concrete and mortar mixes with their associated carbonation depth data over time. The dataset comprises mix designs with a large variety of binders with up to 94% SCMs, collected from the literature as well as unpublished testing reports. The data includes chemical composition and physical properties of the raw materials, mix-designs, compressive strengths, curing and carbonation testing conditions. Natural carbonation was recorded for several years in many cases with both indoor and outdoor results. The database has been analysed to investigate the effects of binder composition and mix design, curing and preconditioning, and relative humidity on the carbonation rate. Furthermore, the accuracy of accelerated carbonation testing as well as possible correlations between compressive strength and carbonation resistance were evaluated. One approach to summerise the physical and chemical resistance in one parameter is the ratio of water content to content of carbonatable CaO (w/CaOreactive ratio). The analysis revealed that the w/CaOreactive ratio is a decisive factor for carbonation resistance, while curing and exposure conditions also influence carbonation. Under natural exposure conditions, the carbonation data exhibit significant variations. Nevertheless, probabilistic inference suggests that both accelerated and natural carbonation processes follow a square-root-of-time behavior, though accelerated and natural carbonation cannot be converted into each other without corrections. Additionally, a machine learning technique was employed to assess the influence of parameters governing the carbonation progress in concretes.


  • Application of deep learning in structural health management of concrete structures

    by Ikenna D. Uwanuakwa, John Bush Idoko, Elvis Mbadike, Rifat Reşatoğlu, George Alaneme

    Structural health management constitutes an essential factor in ensuring the durability of concrete structures. Cracks in concrete, reinforcement corrosion, alkali–silica reaction and efflorescence attacks are common concrete defects that can be identified visually. However, the detection and classification of these defects in concrete bridges and other high-rise concrete structures is a difficult and expensive process using manual approaches. In this research, a deep learning application is applied to detect and classify concrete defects. Concrete images from the public repository were used to create the explored database. The database was divided into training and validation subsets. The visual geometry group (Vgg19), neural search architecture (nasnetlarge) and residual inception block (vinceptionresnetv2) algorithms were used to analyse the images. The results of the overall performance show that the Vgg19 algorithm recorded higher accuracy in the detection and classification of concrete defects when compared to the nasnetlarge and inceptionresnetv2 algorithms. The efficiency of the proposed approach was evaluated using a new dataset containing images of concrete defects. The outcome of this research shows clearly that deep learning models could enhance the efficiency of concrete structural health monitoring in a multi-classification scenario.


  • Open Access

    A Metaheuristic Approach of predicting the Dynamic Modulus in Asphalt Concrete

    by Ilham Yahya Amir, Abdinasir Mohamed Yusuf, Ikenna D. Uwanuakwa

    The prediction of the asphalt dynamic modulus (E*), which measures the material's ability to withstand changes in shape or structure, is important. Previous studies indicated that the well-known Witczak 1-40D model for E* is outperformed by machine learning models. Additionally, the application of machine learning algorithms requires manual fine-tuning of their hyperparameters. In this study, the artificial Hummingbird and Harris Hawks optimization algorithms were employed in the automatic calibration of the Random Forest and Gradient Boost algorithms' hyperparameters for modeling E* using the Witczak 1-40D model and additional parameters. In addition, the model was interpreted using the Shapley value and permutation feature importance. The results indicate that the optimized artificial hummingbird algorithm model performed better, with R² reaching 0.97. The interpretability of the model suggests that the binder parameters exhibited the highest effect on the variance of E*.


  • Open Access

    Enhancing the reliability and accuracy of machine learning models for predicting carbonation progress in fly ash‐concrete: A multifaceted approach

    by Ikenna D. Uwanuakwa, Pınar Akpınar

    Existing machine learning models for carbonation in fly ash blended concrete, developed and validated using accelerated or combined datasets, lack validation against natural carbonation processes in concrete. Furthermore, the reliability and accuracy of these models are directly influenced by the sets of input variables used in model training. This research specifically aims to investigate the reliability and accuracy of machine learning models, trained with accelerated datasets, in predicting the natural carbonation process. Additionally, this study introduces Gaussian process regression (GPR) as an alternative modeling tool, due to its potential for enhanced prediction accuracy. The results of this study indicate that GPR can satisfactorily predict natural carbonation progress in fly ash concrete. Moreover, the study carried out a model interpretation to provide intuitive feature contributions in the black‐box model. The results indicate that the accuracy of the natural carbonation process evaluation of models trained with accelerated carbonation dataset is less than 0.2 R2 value, indicating the inappropriateness of using accelerated carbonation data to train reliable models. Additionally, the model interpretation shows a significant dependency of the natural carbonation process on the binder's chemical composition, highlighting key chemical factors influencing carbonation.