CFChristopher R. Freeze

Christopher R. Freeze

*This is an algorithmically generated author record based on publicly available information.

Christopher R. Freeze has a total of 24 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Nanoscale etching of perovskite oxides for field effect transistor applications

    by Junao Cheng, Hao Yang, Caiyu Wang, Nick Combs, Chris Freeze, Omor Shoron, Wangzhou Wu, Nidhin Kurian Kalarickal, Hareesh Chandrasekar, Susanne Stemmer, et al.

    The etching of epitaxially grown perovskite oxide BaSnO3 (BSO) and BaTiO3 (BTO) thin films is studied using Cl-based (BCl3/Ar) and F-based (CF4/Ar) plasma chemistries in an inductively coupled plasma reactive ion etching (ICP-RIE) system for the development of field effect transistors (FETs). It is found that the BCl3/Ar process has a time-independent and a higher etch rate and creates a smooth etched surface, while the etch rate of BSO and BTO in CF4/Ar plasma decreases with the etching time duration. For the BCl3/Ar etching process, the etch rate increases with both ion density and ion energy, suggesting the combination of chemical plasma etching and physical ion sputtering mechanisms. Using the Cl-based etching process, BaSnO3 and BaTiO3 heterojunction FETs are developed. The devices with a gate length of 1.5 μm have a saturation current density of 287.6 mA/mm, a maximum transconductance of gm = 91.3 mS/mm, an FET mobility of 45.3 cm2/V s, and a threshold voltage of −1.75 V. The etching processes developed in this work will enable further development of perovskite oxide heterostructure electronic devices.


  • Velocity saturation in La-doped BaSnO3 thin films

    by Hareesh Chandrasekar, Junao Cheng, Tianshi Wang, Zhanbo Xia, Nicholas G. Combs, Christopher R. Freeze, Patrick B. Marshall, Joe McGlone, Aaron Arehart, Steven Ringel, et al.

    BaSnO3, a high mobility perovskite oxide, is an attractive material for oxide-based electronic devices. However, in addition to low-field mobility, high-field transport properties such as the saturation velocity of carriers play a major role in determining the device performance. We report on the experimental measurement of the electron saturation velocity in La-doped BaSnO3 thin films for a range of doping densities. The predicted saturation velocities based on a simple LO-phonon emission mode, using an effective LO phonon energy of 120 meV show good agreement with the measurements of velocity saturation in La-doped BaSnO3 films. Density-dependent saturation velocity in the range of 1.8 × 107 cm/s reducing to 2 × 106 cm/s is predicted for δ-doped BaSnO3 channels with carrier densities ranging from 1013 cm−2 to 2 × 1014 cm−2, respectively. These results are expected to aid the informed design of BaSnO3 as an active material for high-charge density electronic transistors.


  • BaTiO3/SrTiO3 heterostructures for ferroelectric field effect transistors

    by Omor F. Shoron, Santosh Raghavan, Christopher R. Freeze, Susanne Stemmer

    Integration of ultrathin ferroelectric thin films with semiconductors is of interest for negative capacitance transistors that exhibit internal voltage gain, which may allow for scaling the supply voltage of low power circuits. In this study, BaTiO3 thin films were grown on doped SrTiO3 channels using molecular beam epitaxy. The BaTiO3 films are ferroelectric despite their low thickness (∼10 nm). Parallel plate capacitor devices exhibit anti-clockwise hysteresis, and a comparison with reference structures without BaTiO3 shows that the polarization in the BaTiO3 thin films is switchable and controls the charge density in the channel. Field effect transistors were fabricated to study the effect of ferroelectricity on the transistor characteristics. Anti-clockwise hysteresis and a shift in threshold-voltage are observed in the output characteristics of the transistors. These properties make these heterostructures a suitable system for studying negative capacitance effects.


  • Open Access

    Role of film stoichiometry and interface quality in the performance of (Ba,Sr)TiO3 tunable capacitors with high figures of merit

    by Christopher R. Freeze, Susanne Stemmer

    Parallel plate capacitors with quality factors exceeding 1000 were fabricated using Ba0.3Sr0.7TiO3 (BST) thin films grown by hybrid molecular beam epitaxy on epitaxial Pt bottom electrodes. The influence of film stoichiometry was investigated by varying the (Ba + Sr)/Ti ratio around the stoichiometric composition. The quality factor is highest for stoichiometric films, but (Ba + Sr)-rich films can be biased to higher fields. Furthermore, two different processes were used to deposit the top electrodes of the parallel plate capacitors. While the quality of the top contact/BST interface did not strongly affect the device quality factor, an enhancement in the dielectric tunability was seen for capacitors with top electrodes deposited at high temperatures, which effectively removes interfacial contamination layers.


  • (Ba,Sr)TiO3 tunable capacitors with RF commutation quality factors exceeding 6000

    by Cedric J. G. Meyers, Christopher R. Freeze, Susanne Stemmer, Robert A. York

    The fabrication, measurement, and modeling of radio-frequency (RF), tunable interdigital capacitors (IDCs) are described. High quality factors of 200 in the S/L-bands combined with a 47% tunability are achieved by utilizing epitaxial (Ba,Sr)TiO3 films grown by hybrid molecular beam epitaxy on LaAlO3 substrates. The fabricated devices consisted of one-port and two-port IDCs embedded in ground-signal-ground, coplanar waveguide transmission lines to enable RF probing. Wideband RF scattering parameters under bias were measured from 100 MHz to 40 GHz. A commutation quality factor averaging 6000 across the L band is achieved. These are the highest reported values in this band.