Peng-Fei Cao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Peng-Fei Cao has a total of 363 co-authors. Here are the top co-authors by number of shared publications:
- Alexei P. Sokolov
University of Tennessee
27 shared publications Sheng Zhao
Department of Chemistry
22 shared publicationsZhenxi Li
Institute of New Energy Material Chemistry School of Materials Science and Engineering Nankai University Tianjin China
20 shared publications- Bingrui Li
Department of Chemistry, University of Tennessee, Knoxville, Tennessee 37996, United States
19 shared publications - Tomonori Saito
Oak Ridge National Laboratory (ORNL), Oak Ridge, TN (United States)
19 shared publications Huabin Yang
Institute of New Energy Material Chemistry, School of Materials Science and Engineering
17 shared publications
Latest Publications
- Open Access
- 1 December 2026
- Published by KEAI Publishing in Supramolecular Materials
- Vol. 5
CO2-derived dynamic covalent networks via transesterification-mediated backbone functionalization
- 1 December 2026
- Published by KEAI Publishing in Supramolecular Materials
- Vol. 5
Open AccessCO2-derived dynamic covalent networks via transesterification-mediated backbone functionalization
- 18 October 2026
- Published by Wiley in Advanced Materials
Healable Thermoset Elastomeric Materials for Passive Radiative Cooling
Passive radiative cooling (PRC) technology with zero‐energy uptake is an efficient thermal management strategy for the development of sustainable society. Fabrication of PRC materials with intrinsic extensibility/dimensional stability and efficient healability that can adapt to irregular shapes with prolonged lifetime remains a significant challenge. The present study introduces a design principle for mechanically robust and healable PRC films based on a cross‐linked elastomeric network with combined physical interactions and dynamic covalent bonds, which can be readily modulated by inorganic coating and micro‐/nano‐porous hierarchical architectures while retaining extensibility and healability. Such thermosetting elastomeric PRC films are scalable with strong solar reflectance and long‐wave infrared emittance, realizing excellent cooling performance even after physical damage and healing process. It demonstrates excellent roof cooling ability in summer yet efficient ice‐sculpture preservation function in winter. The scalable synthesis of thermoset elastomeric PRC films opens up new pathways to realize flexible, stable and healable PRC materials, highly promising for practical applications.
- 18 October 2026
- Published by Wiley in Advanced Materials
Healable Thermoset Elastomeric Materials for Passive Radiative Cooling
Passive radiative cooling (PRC) technology with zero‐energy uptake is an efficient thermal management strategy for the development of sustainable society. Fabrication of PRC materials with intrinsic extensibility/dimensional stability and efficient healability that can adapt to irregular shapes with prolonged lifetime remains a significant challenge. The present study introduces a design principle for mechanically robust and healable PRC films based on a cross‐linked elastomeric network with combined physical interactions and dynamic covalent bonds, which can be readily modulated by inorganic coating and micro‐/nano‐porous hierarchical architectures while retaining extensibility and healability. Such thermosetting elastomeric PRC films are scalable with strong solar reflectance and long‐wave infrared emittance, realizing excellent cooling performance even after physical damage and healing process. It demonstrates excellent roof cooling ability in summer yet efficient ice‐sculpture preservation function in winter. The scalable synthesis of thermoset elastomeric PRC films opens up new pathways to realize flexible, stable and healable PRC materials, highly promising for practical applications.
- 1 September 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (18) , 10384-10393
Dual-Mode Recyclable Ethylene-Propylene Rubber Via Dynamic Structure Regulation
Elastomers with dynamic covalent networks (DCNs) often undergo progressive mechanical degradation after thermal reprocessing mainly due to incidental backbone cleavage and chemical oxidation, whereas their chemical recycling typically relies on harsh conditions. Herein, we report a mechanically robust, dual-mode recyclable ethylene-propylene rubber (EPR) by engineering boronic ester-based dynamic cross-linking domains with tunable architectures. It is revealed that the mechanical performance and recyclability can be systematically tailored through two structural parameters, domain size and domain density, which govern the dynamic bond exchange kinetics, network rearrangement capability, and overall network connectivity. Rheological analysis decouples the distinct contributions of dynamic bond exchange and chain entanglement/disentanglement, revealing that relaxation behavior is governed by synergistic interplay between the architecture of dynamic domains and topological constraints. The optimized EPR exhibits excellent mechanical performance (EPDM-0.5H5I6 (5.18 MPa, 1407%) and dual-mode recyclability, in which the reprocessed rubber obtained via hot-pressing achieves high mechanical recovery (95% recovery in tensile strength), while mild alcoholysis-based chemical recycling enables selective network deconstruction with preserved backbone integrity for reconstruction. Our dynamic domain-based regulation strategy establishes a versatile platform for tuning mechanical robustness of sustainable rubbers with efficient recyclability.
- 1 September 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (18) , 10384-10393
Dual-Mode Recyclable Ethylene-Propylene Rubber Via Dynamic Structure Regulation
Elastomers with dynamic covalent networks (DCNs) often undergo progressive mechanical degradation after thermal reprocessing mainly due to incidental backbone cleavage and chemical oxidation, whereas their chemical recycling typically relies on harsh conditions. Herein, we report a mechanically robust, dual-mode recyclable ethylene-propylene rubber (EPR) by engineering boronic ester-based dynamic cross-linking domains with tunable architectures. It is revealed that the mechanical performance and recyclability can be systematically tailored through two structural parameters, domain size and domain density, which govern the dynamic bond exchange kinetics, network rearrangement capability, and overall network connectivity. Rheological analysis decouples the distinct contributions of dynamic bond exchange and chain entanglement/disentanglement, revealing that relaxation behavior is governed by synergistic interplay between the architecture of dynamic domains and topological constraints. The optimized EPR exhibits excellent mechanical performance (EPDM-0.5H5I6 (5.18 MPa, 1407%) and dual-mode recyclability, in which the reprocessed rubber obtained via hot-pressing achieves high mechanical recovery (95% recovery in tensile strength), while mild alcoholysis-based chemical recycling enables selective network deconstruction with preserved backbone integrity for reconstruction. Our dynamic domain-based regulation strategy establishes a versatile platform for tuning mechanical robustness of sustainable rubbers with efficient recyclability.
- 15 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (40) , e73725
Closed‐Loop Chemically Recyclable Separation Membranes With Superior Pervaporation Performance
With low carbon footprint and reduced secondary pollution, membrane technique offers an energy‐saving separation process while end‐of‐life disposal practices of polymer membranes remain an issue. Herein, a light‐triggered dynamic polydimethylsiloxane (PDMS) network design, that enabled a closed‐loop recyclable separation membrane with superior pervaporation performance, is proposed. Such a dynamic network is constructed through [4 + 4] photodimerization of anthracene grafted PDMS under 365‐nm UV light, while 254‐nm UV light transforms the crosslinked membranes into linear polymers. The facile deconstruction process is completed within 35 min at ambient temperature, and recycling test demonstrates efficient reconstruction of PDMS networks with 92.6% conversion of anthracene groups within 10 min. The membrane exhibits a superior ethanol recovery performance with a pervaporation separation index of 13,285, surpassing the reported state‐of‐the‐art PDMS‐based membranes. The recycled membrane retains efficient ethanol recovery even after five solid‐liquid conversion cycles with minor deviations in flux and separation factor compared to the original membrane. Such a dynamic network also demonstrates an efficient self‐healing capability with retained pervaporation performance toward minor defects. The design principle of closed‐loop chemically recyclable separation membranes with retained and superior functionality provides a scalable membrane technique adaptable to diverse separation applications.
- 15 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (40) , e73725
Closed‐Loop Chemically Recyclable Separation Membranes With Superior Pervaporation Performance
With low carbon footprint and reduced secondary pollution, membrane technique offers an energy‐saving separation process while end‐of‐life disposal practices of polymer membranes remain an issue. Herein, a light‐triggered dynamic polydimethylsiloxane (PDMS) network design, that enabled a closed‐loop recyclable separation membrane with superior pervaporation performance, is proposed. Such a dynamic network is constructed through [4 + 4] photodimerization of anthracene grafted PDMS under 365‐nm UV light, while 254‐nm UV light transforms the crosslinked membranes into linear polymers. The facile deconstruction process is completed within 35 min at ambient temperature, and recycling test demonstrates efficient reconstruction of PDMS networks with 92.6% conversion of anthracene groups within 10 min. The membrane exhibits a superior ethanol recovery performance with a pervaporation separation index of 13,285, surpassing the reported state‐of‐the‐art PDMS‐based membranes. The recycled membrane retains efficient ethanol recovery even after five solid‐liquid conversion cycles with minor deviations in flux and separation factor compared to the original membrane. Such a dynamic network also demonstrates an efficient self‐healing capability with retained pervaporation performance toward minor defects. The design principle of closed‐loop chemically recyclable separation membranes with retained and superior functionality provides a scalable membrane technique adaptable to diverse separation applications.
- 2 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (25) , e4962504
Elucidating Kinetic‐Mediated Polymerization Behavior for In Situ Formation of Fluorine‐Containing Gel Polymer Electrolyte
Fluorinated gel polymer electrolytes (FGPEs) prepared via in situ polymerization are expected to expedite the large‐scale application of lithium metal batteries (LMBs) by enabling stable LiF‐rich solid electrolyte interphases (SEIs) and good compatibility with high‐voltage cathodes. However, the electron‐withdrawing nature of fluorine units retards polymerization kinetics of such monomers, resulting in GPEs with compromised mechanical performance and cycling durability. Herein, a design principle for in situ formation of fluorinated copolymers is proposed to regulate the polymerization kinetics of trifluoroethyl methacrylate (TFEMA)‐typed monomers. Such strategy yields relatively uniform polymer chains with moderate molecular weights, which are subsequently crosslinked to form a robust fluorinated–nitrogenated copolymer network (FNPE). The tailored polymer matrix integrates the capabilities to form a LiF‐containing SEI promoted by fluorinated segments, enhanced mechanical robustness, and a Li 3 N‐rich interphase contributed by the N ‐isopropylacrylamide (NIPAM) domains. Consequently, the FNPE achieves NCM811(6.8 mg cm −2 , 1.2 mAh cm −2 )//Li full cells with high capacity retention (> 80%, 225 cycles), and applicable in wide temperature range (−15 to 60°C) and pouch cell configuration (40 µm Li). Through experimental and multiscale modeling investigations, this work elucidates the intrinsic kinetic challenge for in situ formed FGPEs and provides a new design principle of copolymer‐type electrolytes for durable LMBs.
- 2 May 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (25) , e4962504
Elucidating Kinetic‐Mediated Polymerization Behavior for In Situ Formation of Fluorine‐Containing Gel Polymer Electrolyte
Fluorinated gel polymer electrolytes (FGPEs) prepared via in situ polymerization are expected to expedite the large‐scale application of lithium metal batteries (LMBs) by enabling stable LiF‐rich solid electrolyte interphases (SEIs) and good compatibility with high‐voltage cathodes. However, the electron‐withdrawing nature of fluorine units retards polymerization kinetics of such monomers, resulting in GPEs with compromised mechanical performance and cycling durability. Herein, a design principle for in situ formation of fluorinated copolymers is proposed to regulate the polymerization kinetics of trifluoroethyl methacrylate (TFEMA)‐typed monomers. Such strategy yields relatively uniform polymer chains with moderate molecular weights, which are subsequently crosslinked to form a robust fluorinated–nitrogenated copolymer network (FNPE). The tailored polymer matrix integrates the capabilities to form a LiF‐containing SEI promoted by fluorinated segments, enhanced mechanical robustness, and a Li 3 N‐rich interphase contributed by the N ‐isopropylacrylamide (NIPAM) domains. Consequently, the FNPE achieves NCM811(6.8 mg cm −2 , 1.2 mAh cm −2 )//Li full cells with high capacity retention (> 80%, 225 cycles), and applicable in wide temperature range (−15 to 60°C) and pouch cell configuration (40 µm Li). Through experimental and multiscale modeling investigations, this work elucidates the intrinsic kinetic challenge for in situ formed FGPEs and provides a new design principle of copolymer‐type electrolytes for durable LMBs.
- 2 May 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (25) , e4962504
Elucidating Kinetic‐Mediated Polymerization Behavior for In Situ Formation of Fluorine‐Containing Gel Polymer Electrolyte
Fluorinated gel polymer electrolytes (FGPEs) prepared via in situ polymerization are expected to expedite the large‐scale application of lithium metal batteries (LMBs) by enabling stable LiF‐rich solid electrolyte interphases (SEIs) and good compatibility with high‐voltage cathodes. However, the electron‐withdrawing nature of fluorine units retards polymerization kinetics of such monomers, resulting in GPEs with compromised mechanical performance and cycling durability. Herein, a design principle for in situ formation of fluorinated copolymers is proposed to regulate the polymerization kinetics of trifluoroethyl methacrylate (TFEMA)‐typed monomers. Such strategy yields relatively uniform polymer chains with moderate molecular weights, which are subsequently crosslinked to form a robust fluorinated–nitrogenated copolymer network (FNPE). The tailored polymer matrix integrates the capabilities to form a LiF‐containing SEI promoted by fluorinated segments, enhanced mechanical robustness, and a Li 3 N‐rich interphase contributed by the N ‐isopropylacrylamide (NIPAM) domains. Consequently, the FNPE achieves NCM811(6.8 mg cm −2 , 1.2 mAh cm −2 )//Li full cells with high capacity retention (> 80%, 225 cycles), and applicable in wide temperature range (−15 to 60°C) and pouch cell configuration (40 µm Li). Through experimental and multiscale modeling investigations, this work elucidates the intrinsic kinetic challenge for in situ formed FGPEs and provides a new design principle of copolymer‐type electrolytes for durable LMBs.
- 2 May 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (25) , e4962504
Elucidating Kinetic‐Mediated Polymerization Behavior for In Situ Formation of Fluorine‐Containing Gel Polymer Electrolyte
Fluorinated gel polymer electrolytes (FGPEs) prepared via in situ polymerization are expected to expedite the large‐scale application of lithium metal batteries (LMBs) by enabling stable LiF‐rich solid electrolyte interphases (SEIs) and good compatibility with high‐voltage cathodes. However, the electron‐withdrawing nature of fluorine units retards polymerization kinetics of such monomers, resulting in GPEs with compromised mechanical performance and cycling durability. Herein, a design principle for in situ formation of fluorinated copolymers is proposed to regulate the polymerization kinetics of trifluoroethyl methacrylate (TFEMA)‐typed monomers. Such strategy yields relatively uniform polymer chains with moderate molecular weights, which are subsequently crosslinked to form a robust fluorinated–nitrogenated copolymer network (FNPE). The tailored polymer matrix integrates the capabilities to form a LiF‐containing SEI promoted by fluorinated segments, enhanced mechanical robustness, and a Li 3 N‐rich interphase contributed by the N ‐isopropylacrylamide (NIPAM) domains. Consequently, the FNPE achieves NCM811(6.8 mg cm −2 , 1.2 mAh cm −2 )//Li full cells with high capacity retention (> 80%, 225 cycles), and applicable in wide temperature range (−15 to 60°C) and pouch cell configuration (40 µm Li). Through experimental and multiscale modeling investigations, this work elucidates the intrinsic kinetic challenge for in situ formed FGPEs and provides a new design principle of copolymer‐type electrolytes for durable LMBs.
- Open Access
- 23 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17
Recyclable thermoplastic silicone elastomers from non-carbon heteroatomic polymer backbones
Silicone materials are indispensable across industrial and consumer domains, yet their robust Si–O–Si backbones resist depolymerization and typically require chemical crosslinking to attain elastomeric properties. Here we report a modular synthesis to access non-carbon heteroatomic backbone polymers (PTeSiO) featuring periodic Si–O–Te–O linkages. This copolymerization merges Si–O and Te–O as building blocks, enabling a one-pot, room-temperature aqueous route to high-molecular-weight, transparent elastomers with precise control over backbone composition and side-chain architecture. Main-chain engineering via redox-labile Te–O motifs enables chemoselective backbone scission under mild reductive conditions, affording on-demand polymerization–depolymerization cycles with efficient monomer recovery. The semi-flexible backbones and chain entanglement impart elasticity, thermoplastic processability, and side-chain-dependent mechanical performance. This work establishes a modular and general chemical strategy for creating non-carbon heteroatomic backbones as a design principle for sustainable and recyclable silicone materials.
- 23 April 2026
- Published by Springer Nature in Nature Communications
- Vol. 17
Open AccessRecyclable thermoplastic silicone elastomers from non-carbon heteroatomic polymer backbones
Silicone materials are indispensable across industrial and consumer domains, yet their robust Si–O–Si backbones resist depolymerization and typically require chemical crosslinking to attain elastomeric properties. Here we report a modular synthesis to access non-carbon heteroatomic backbone polymers (PTeSiO) featuring periodic Si–O–Te–O linkages. This copolymerization merges Si–O and Te–O as building blocks, enabling a one-pot, room-temperature aqueous route to high-molecular-weight, transparent elastomers with precise control over backbone composition and side-chain architecture. Main-chain engineering via redox-labile Te–O motifs enables chemoselective backbone scission under mild reductive conditions, affording on-demand polymerization–depolymerization cycles with efficient monomer recovery. The semi-flexible backbones and chain entanglement impart elasticity, thermoplastic processability, and side-chain-dependent mechanical performance. This work establishes a modular and general chemical strategy for creating non-carbon heteroatomic backbones as a design principle for sustainable and recyclable silicone materials.
- Open Access
- 1 April 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (4)
Sustainable and mass-producible epoxy vitrimer-based gel polymer electrolytes
With the growing demand for high-energy-density energy storage devices, lithium metal batteries (LMBs) using lithium metal as anodes have emerged as promising candidates. However, the issues of lithium anodes, such as dendrite growth, poor compatibility with liquid electrolytes, and safety concerns, pose challenges for their practical use. Therefore, gel polymer electrolytes (GPEs) become popular due to their good compatibility with lithium anodes. However, traditional GPEs suffer from poor mechanical strength, complex fabrication processes, lack of self-healing ability and recyclability, which hinder their large-scale and sustainable application. Here we present an epoxy vitrimer (cross-linked network with dynamic covalent bonds) as GPE for LMBs, synthesized from commercially available raw materials of epoxy resins by a simple technology of hot-pressing. The epoxy vitrimer-based GPE shows good electrochemical performance, with over 1000 hours of stable cycling in Li symmetric cells and impressive cycling retention of 92.4% after 200 cycles in LiFePO4||Li cells. Moreover, dynamic covalent bonds endow vitrimer with remarkable self-healing ability and recyclability, which would further improve the cycling and safety aspects of the battery. Therefore, due to its low material costs and simple manufacturing process, epoxy vitrimer-based GPE has a great potential for sustainable mass production in practical application in LMBs.
- 1 April 2026
- Published by Tsinghua University Press in Nano Research
- Vol. 19 (4)
Open AccessSustainable and mass-producible epoxy vitrimer-based gel polymer electrolytes
With the growing demand for high-energy-density energy storage devices, lithium metal batteries (LMBs) using lithium metal as anodes have emerged as promising candidates. However, the issues of lithium anodes, such as dendrite growth, poor compatibility with liquid electrolytes, and safety concerns, pose challenges for their practical use. Therefore, gel polymer electrolytes (GPEs) become popular due to their good compatibility with lithium anodes. However, traditional GPEs suffer from poor mechanical strength, complex fabrication processes, lack of self-healing ability and recyclability, which hinder their large-scale and sustainable application. Here we present an epoxy vitrimer (cross-linked network with dynamic covalent bonds) as GPE for LMBs, synthesized from commercially available raw materials of epoxy resins by a simple technology of hot-pressing. The epoxy vitrimer-based GPE shows good electrochemical performance, with over 1000 hours of stable cycling in Li symmetric cells and impressive cycling retention of 92.4% after 200 cycles in LiFePO4||Li cells. Moreover, dynamic covalent bonds endow vitrimer with remarkable self-healing ability and recyclability, which would further improve the cycling and safety aspects of the battery. Therefore, due to its low material costs and simple manufacturing process, epoxy vitrimer-based GPE has a great potential for sustainable mass production in practical application in LMBs.
- 23 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (12) , 18266-18276
Efficient Li + Transport through a Single-Ion-Conducting Protective Layer for Stable Lithium–Metal Batteries
The application of metallic Li anodes as high-capacity anodes is usually compromised by unstable solid electrolyte interphase, Li0 dendrites, and side reactions, which lead to diminished cycling performance and serious safety concerns. To mitigate these issues, a hybrid single-ion-conducting protective layer (i.e., SPL-20) is proposed to enhance both the cycling lifetime and the safety of Li-metal batteries. With single-ion-conducting properties, such a layer can effectively reduce the uneven distribution of surface reactions, as evidenced by both simulations and electrochemical measurements. Thus, SPL-20 possesses the advantages of suppressing Li0 dendrites, preventing rapid capacity decay, and operability at extreme conditions (e.g., -25 °C). Notable achievements include an anode-free battery (LiFePO4/SPL-20@Cu cell) with a capacity retention of 59% at 0.5 mA cm-2 after 50 cycles, a LiFePO4/SPL-20@Li cell with a capacity of ∼110 mAh g-1 at 2C, especially a full cell with high-voltage cathode and 20 μm thick Li anode (NCM811/SPL-20@Li cell) with specific capacity of 172 mAh g-1 under 25 °C and 143.1 mAh g-1 under -25 °C after 100 cycles. This modified anodic interface strategy provides promising solutions to conquer interface challenges in high-performance Li-metal batteries.
- 23 March 2026
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 18 (12) , 18266-18276
Efficient Li + Transport through a Single-Ion-Conducting Protective Layer for Stable Lithium–Metal Batteries
The application of metallic Li anodes as high-capacity anodes is usually compromised by unstable solid electrolyte interphase, Li0 dendrites, and side reactions, which lead to diminished cycling performance and serious safety concerns. To mitigate these issues, a hybrid single-ion-conducting protective layer (i.e., SPL-20) is proposed to enhance both the cycling lifetime and the safety of Li-metal batteries. With single-ion-conducting properties, such a layer can effectively reduce the uneven distribution of surface reactions, as evidenced by both simulations and electrochemical measurements. Thus, SPL-20 possesses the advantages of suppressing Li0 dendrites, preventing rapid capacity decay, and operability at extreme conditions (e.g., -25 °C). Notable achievements include an anode-free battery (LiFePO4/SPL-20@Cu cell) with a capacity retention of 59% at 0.5 mA cm-2 after 50 cycles, a LiFePO4/SPL-20@Li cell with a capacity of ∼110 mAh g-1 at 2C, especially a full cell with high-voltage cathode and 20 μm thick Li anode (NCM811/SPL-20@Li cell) with specific capacity of 172 mAh g-1 under 25 °C and 143.1 mAh g-1 under -25 °C after 100 cycles. This modified anodic interface strategy provides promising solutions to conquer interface challenges in high-performance Li-metal batteries.