JSJutta Schwarzkopf

Jutta Schwarzkopf

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Jutta Schwarzkopf has a total of 203 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Al1−xHfxN Thin Films with Enhanced Piezoelectric Responses for GHz Surface Acoustic Wave Devices

    by Laura I. Wagner, Verena Streibel, Esperanza Luna, Katarina S. Flashar, Valentin Walbrunn, Walid Anders, Nicole Volkmer, Doreen Steffen, Katrin Morgenroth, Frans Munnik, et al.

    Ternary compounds obtained by alloying wurtzite AlN with transition metals have emerged as promising materials with significantly enhanced piezoelectric characteristics relative to binary AlN. The increased electromechanical coupling in these compounds boosts the performance of high‐frequency acoustic devices. To date, progress has largely focused on aluminum scandium nitride (), which, while widely deployed, relies on scandium, a costly and critical element that is challenging to refine. Here, we investigate aluminum hafnium nitride () as a more economical and accessible alternative to . Using reactive co‐sputtering on both Si and ‐ substrates, we demonstrate wurtzite thin films () with strong ‐axis texture and nearly isotropic lattice expansion upon Hf incorporation. X‐ray absorption spectroscopy indicates cross‐gap hybridization between N 2 and Hf 5 states, which can enhance the Born effective charge and, thereby, the piezoelectric response. The incorporation of Hf leads to a multifold enhancement in the piezoelectric coefficient, , relative to AlN, despite increasing structural disorder in these thin films. Building on this increased electromechanical coupling, we present functional GHz surface acoustic wave (SAW) resonators that exhibit enhanced performance, as well as efficient excitation of bulk acoustic waves with low propagation losses. These results establish as a promising platform for next‐generation high‐frequency electromechanical devices, with prospects for further piezoelectric enhancements through improved epitaxy.

  • Open Access

    Linear dichroic soft x-ray microscopy of ferroelectric stripe domains in epitaxial K 0.6 Na 0.4 NbO 3

    by M. Schneider, T. A. Butcher, S. Wagner, D. Metternich, C. Klose, E. Malm, R. Battistelli, V. Deinhart, J. Fuchs, S. Wittrock, et al.

    Functional properties of ferroelectric thin films are governed by domains that can be engineered by epitaxial strain. Soft x-ray microscopy can image domain structures with elemental and electronic sensitivity, but hitherto its application to strain-stabilized domains has been hindered by the absorption of soft x-rays in epitaxial substrates. Here, it is demonstrated how this limitation can be overcome by locally back-thinning the (110) TbScO 3 substrate of epitaxial K 0.6 Na 0.4 NbO 3 ferroelectric thin films to achieve soft x-ray transparency at the O -edge around 530 eV. Strain-induced ferroelectric stripe domains with periods down to 44 nm were resolved by scanning transmission x-ray microscopy and coherent diffractive imaging by exploiting the x-ray linear dichroism of hybridized O 2 p –Nb 4 d states, providing sensitivity to in-plane polarization components under normal incidence. The results establish soft x-ray microscopy for nanoscale imaging of epitaxial ferroelectric domain structures and open perspectives for time-resolved studies thereof.

  • Open Access

    Machine learning-driven optimization of PLD parameters for epitaxial growth of LiNbO3 thin films

    by Hyeyeon Cho, Milena Petkovic, Steffen Ganschow, Jutta Schwarzkopf

  • Open Access

    X-ray reciprocal space imaging of a screw-dislocation network at a low-angle twist boundary in a SrTiO 3 membrane transfer-bonded to bulk SrTiO 3

    by Jeremy Maltitz, Martin Schmidbauer, Carsten Richter, Michael Hanke, Ferris Stümpel, Thomas Schroeder, Jutta Schwarzkopf, Jens Martin

    The transfer of oxide membranes provides a new dimension in material design that goes beyond the limitations of classical hetero-epitaxy. For example, the transfer of freestanding membranes offers the in-plane twist angle between film and substrate as a tuneable degree of freedom. An ideal twist boundary yields formation of an in-plane screw-dislocation network to reduce interfacial stress. Previously, periodic screw-dislocation networks have been demonstrated by wafer bonding of two crystals, where the twist boundary is embedded in the bulk and made accessible to detailed characterization mostly by destructive methods. Recent approaches exploited freestanding membranes to create twist boundaries with the interface located only nanometers beneath the surface, making it readily accessible by near-surface-sensitive techniques. In this work, both approaches were combined to transfer membranes on the mm²-scale via wafer bonding and subsequent release by etching the sacrificial layer. High-resolution synchrotron-based grazing incidence x-ray diffraction was performed to investigate the structure of the twisted SrTiO 3 / SrTiO 3 interface. In order to gain a better qualitative and quantitative understanding of the experimental results, we simulated the x-ray diffraction of twisted perovskites based on continuum elastic theory and kinematical scattering. Our measurements show that the measured diffraction patterns are consistent with the formation of a periodic screw-dislocation network, since the apparent superlattice reflections coincide with the obtained diffraction pattern from simulations. However, the intensity profile and appearance of specific symmetry-forbidden diffraction peaks in the experiments cannot be described by elastic displacements alone.

  • Epitaxial Yttrium Doped Hafnia with Giant Remnant Polarization for Ferroelectric Tunnel Junction Artificial Synapses and Neuromorphic Computing

    by Haoyan Meng, Xin Ren, Sijin Li, Jun Yang, Yankun Wang, Hong Wang, Boyu Wang, Jinyan Zhao, Jutta Schwarzkopf, Wei Ren, et al.

    Hafnia-based ferroelectric tunnel junctions (FTJs) emerge as one of the most promising solutions for memristor artificial synapse devices for neuromorphic computing. The device performance enhancement and the application are, however, hindered by the limited ferroelectricity of hafnia films and the unoptimized electrical pulses strategy. We employed yttrium doping engineering and (011)-oriented SrTiO3 substrates in this work to achieve ultrathin epitaxial hafnia films with a giant remnant polarization of 54.7 μC/cm2. The crystallographic properties of (Hf,Y)O2-δ (HYO) films were thoroughly clarified, and they exhibited a single ferroelectric orthorhombic phase with a certain degree of rhombohedral distortion. Based on such films, high-performance FTJs were implemented, displaying 8 distinct resistance states (3 bits) with excellent endurance of over 105 switching cycles. Combining with the designed optimal staircase step electrical pulses, our HYO FTJs display high-quality artificial synapse behavior, including highly linear potentiation and depression, and thus ultimately permit a recognition accuracy of 97.7% (88.4%) for the MNIST (Fashion-MNIST) data set. These results not only highlight the great potential of epitaxial HYO FTJs for artificial synapses but also provide an in-depth understanding of the physics of structure-ferroelectrics correlation of the hafnia-related fluorite ferroelectric materials.


  • Open Access

    Ferroelectric switching and temperature-dependent electrical properties of K 0.7 Na 0.3 NbO 3 capacitor devices

    by M. de Oliveira Guimaraes, C. Richter, J. Schwarzkopf, M. Schmidbauer, M. Engl, S. Slesazeck

    We performed the macroscopic electrical characterization of epitaxially grown, compressively strained K 0.7 Na 0.3 NbO 3 thin films (70 nm) on SrRuO 3 / ( 110 ) TbScO 3 substrates, displaying monoclinic Mc domains. Hysteresis measurements revealed ferroelectric behavior up to at least 10 7 cycles at room temperature, with a polarization value ( 2 P ) of 25 µ C / cm 2 . A double-peak switching behavior was observed, attributed primarily to domain-wall pinning/depinning and back switching, with a wake-up effect analogous to that reported in doped hafnium oxide and lead zirconate titanate systems. Temperature-dependent measurements (100 K—300 K) confirm ferroelectricity at low temperatures, while the double-peak behavior becomes less pronounced due to suppression of thermally activated back switching. Capacitance-voltage measurements reveal an increased dielectric response at higher temperatures, consistent with enhanced domain wall mobility. The asymmetry in coercive voltages additionally points to internal bias fields likely arising from electrode interfaces. Our results provide a comprehensive overview of the switching dynamics of strained K 0.7 Na 0.3 NbO 3 films and demonstrate ferroelectricity in the Mc phase.


  • Open Access

    Epitaxial Growth of CaTiO3 Thin Films by Metal Organic Vapor Phase Epitaxy for Potential Applications in Memristive Devices

    by Mohamed Abdeldayem, Chang-Ming Liu, Izaz-Ali Shah, Andreas Fiedler, Detlef Klimm, Martin Albrecht, Jutta Schwarzkopf

    Calcium titanate thin films with high structural quality were grown heteroepitaxially on perovskite oxide substrates using the liquid-delivery spin metal-organic vapor phase epitaxy (MOVPE) technique. To determine the growth window, suitable metal-organic precursors were selected, and their evaporation conditions were established. Initially, the thermal decomposition behavior of the precursors was studied using thermogravimetric analysis, which showed that full pyrolysis at 460 °C is possible for both the Ca and Ti precursors. This enabled the growth of fully strained, stoichiometric CaTiO3 films on SrTiO3 and NdGaO3 substrates, and potentially on other perovskite oxide substrates, within the diffusion-limited regime. The influence of vaporization temperatures, substrate temperature, oxygen-to-argon ratio, and Ca-to-Ti ratio on the structural properties of the CaTiO3 thin films was investigated using high-resolution X-ray diffraction, atomic force microscopy, and transmission electron microscopy. Structural analysis was ultimately correlated with electrical properties measured via IV curves. Intrinsic resistive switching was observed for stoichiometric and slightly off-stoichiometric CaTiO3 films grown on SrTiO3 substrates with ≈2.2% tensile strain. Relative to our previous work on resistive switching in SrTiO3 (Baki., Sci. Rep., 2021, 11 (1), 1-11), the underlying mechanism is discussed in the context of CaTiO3. This highlights the potential of CaTiO3 for technological applications such as resistive random-access memory (ReRAM) and neuromorphic computing.


  • Open Access

    Periodic lateral superlattice in bonded SrTiO3/SrTiO3 twisted perovskites

    by M. Schmidbauer, J. Maltitz, F. Stümpel, M. Hanke, C. Richter, J. Schwarzkopf, J. Martin

    Stacking of freestanding membranes enables the formation of interfaces beyond what can be obtained with classical heteroepitaxy. In particular, twisted interfaces provide unique physical properties not existent in the corresponding individual layers. An ideal twist grain boundary yields an in-plane screw-dislocation network, assuming sufficiently strong interactions across the interface, for example, via covalent or ionic bonding. Hereby, the distance between dislocation lines, that is the length scale of the Moiré pattern, is set by the twist angle between the adjacent crystalline surfaces and the lattice mismatch in case that different materials are placed together. The associated strain gradients of the periodic pattern are especially appealing for oxide-based perovskites due to the intricate connection between surface polarization and subtle structural deformations such as the oxygen octahedra tilt. Recently, freestanding oxide perovskites became available via the sacrificial layer approach, opening a pathway toward oxide-based Moiré materials. Here, we demonstrate efficient bonding of a freestanding SrTiO3 layer to a SrTiO3 single-crystal by initially conducting a wafer-bonding process at high temperature and only subsequently dissolving the sacrificial layer. We investigate the twisted SrTiO3/SrTiO3 interface with x-ray diffraction in grazing incidence geometry and observe clear signatures of a highly periodic lateral superlattice consistent with the formation of a screw-dislocation network. Our work demonstrates a robust route for the fabrication of twisted perovskites and their development into a functional material platform with designed strain gradients at the nanoscale.


  • Ultra-thin epitaxial orthorhombic ferroelectric Hf0.97Y0.03O2 films on La2/3Sr1/3MnO3/SrTiO3 substrate with different orientations

    by Qiang Wang, Haoyan Meng, Yexuan Guo, Yankun Wang, Liyan Dai, Jinyan Zhao, Libo Zhao, Zhuangde Jiang, Jutta Schwarzkopf, Shengli Wu, et al.


  • Remote epitaxy of K0.5Na0.5NbO3 films on SrTiO3

    by Jun Yang, Yankun Wang, Liyan Dai, Heping Wu, Xin Ren, Ruihua An, Sijin Li, Lingyan Wang, Linya Huang, Libo Zhao, et al.

    Remote epitaxy represents a novel method for the preparation of high-quality epitaxial single crystalline films capable of being transferred onto arbitrary substrates for electronic and flexible functional devices. It was initially applied for semiconductors and later for functional complex perovskite oxides. However, the understanding of the impact of substrate orientation, growth mode, crystallinity and strain relaxation on oxide remote epitaxial systems is still lacking. Lead-free potassium sodium niobate (KNN) thin films have attracted intense interests owing to their superior piezoelectric properties and environment-friendly features. However, the remote epitaxy of KNN has rarely been reported. Therefore, in this study, we present the remote epitaxy of KNN on single-layer graphene-covered SrTiO3 (STO) substrates with different orientations. All STO substrates with three orientations, i.e. (001), (011) and (111), permitted the remote epitaxy of KNN, with STO (001) leading to superior crystallinity. The growth mode of KNN on graphene/STO (G-STO) was found to be Volmer–Weber, with initial island nucleation on the wrinkles of graphene and a subsequent coalescence to complete the growth and obtain flat films. Furthermore, remote epitaxial KNN on G-STO (001) displayed an abrupt interface without pinholes in graphene or layer interdiffusion. The strain relaxation of remote epitaxial KNN films was explored as a function of film thickness, which already underwent partial relaxation due to the weaker substrate clamping effect through graphene but experienced a slight strain increase after island coalescence. These results not only show that the applied material systems for remote epitaxy can be expanded to more complex oxides, but also enrich the understanding of the oxide heteroepitaxy mechanism involving a graphene monolayer, particularly nucleation and strain relaxation.