Reza Maram
Research Subjects
Reza Maram has a total of 39 co-authors. Here are the top co-authors by number of shared publications:
- Luis Romero Cortés
Institut National de la Recherche Scientifique (INRS-EMT), Varennes, Canada
12 shared publications José Azaña
11 shared publications- José Azaña
Institut National de la Recherche Scientifique, Centre Énergie Matériaux Telecommunications (INRS-EMT), Montréal, QC H5A-1K6, Canada
11 shared publications Jose Azana
Institut National de la Recherche Scientifique - Énergie, Matériaux et Télécommunications (INRS-EMT), 800 de la Gauchetiere Ouest, Suite 6900, H5A 1K6, Montréal (Quebec), Canada
4 shared publicationsJames Van Howe
Department of Physics and Astronomy, Augustana College, Rock Island 61201, USA
3 shared publications- Manuel Pablo Fernandez
Institut National de la Recherche Scientifique – Énergie Matériaux et Télécommunications (INRS–EMT), Montréal, QC H5A 1K6, Canada
3 shared publications
Latest Publications
- 3 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (14) , 6469-6483
Real-Time Spectrum Monitoring System for Next-Generation High-Capacity Optical Networks
This paper presents new theoretical and experimental results along with in-depth insight into a recently introduced simple real-time optical monitoring (RTOM) system and method, suitable for next-generation high-capacity optical networks. The proposed method employs electro-optic (EO) temporal sampling, followed by dispersion-induced real-time Fourier transformation and high-speed signal acquisition. The fundamentals, main design trade-offs, capabilities, and limitations of the RTOM system are thoroughly examined, including a detailed investigation of detection noise and sampling module extinction ratio (ER) effects on dynamic range. The RTOM design process is explored, and reasonable values for design parameters are identified based on practical and realistic specifications. The RTOM method continuously maps the spectral content of dense-wavelength-division-multiplexed (DWDM) data streams into the time domain, allowing to determine the presence and relative power of individual channels with high frequency resolution (∼30 GHz) and high sensitivity (∼1 dB). Notably, it provides fast measurement update rates (in the MHz range), far surpassing the measurement speed of commercially available optical spectrum analyzers, which is typically in the kHz range and slower. This scheme demonstrates remarkable versatility in performing real-time spectral analysis of DWDM signals across diverse operational conditions, including different modulation formats, bit rates (accommodating up to several hundred Gb/s per channel), various dispersion values in the optical link, and channel spacings from 50 GHz to 100 GHz spanning the entire C-band. The comprehensive evaluation reported here underscores the system's adaptability to diverse network configurations and transmission parameters, positioning it as a powerful tool for advanced optical network monitoring.
- 3 April 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 43 (14) , 6469-6483
Real-Time Spectrum Monitoring System for Next-Generation High-Capacity Optical Networks
This paper presents new theoretical and experimental results along with in-depth insight into a recently introduced simple real-time optical monitoring (RTOM) system and method, suitable for next-generation high-capacity optical networks. The proposed method employs electro-optic (EO) temporal sampling, followed by dispersion-induced real-time Fourier transformation and high-speed signal acquisition. The fundamentals, main design trade-offs, capabilities, and limitations of the RTOM system are thoroughly examined, including a detailed investigation of detection noise and sampling module extinction ratio (ER) effects on dynamic range. The RTOM design process is explored, and reasonable values for design parameters are identified based on practical and realistic specifications. The RTOM method continuously maps the spectral content of dense-wavelength-division-multiplexed (DWDM) data streams into the time domain, allowing to determine the presence and relative power of individual channels with high frequency resolution (∼30 GHz) and high sensitivity (∼1 dB). Notably, it provides fast measurement update rates (in the MHz range), far surpassing the measurement speed of commercially available optical spectrum analyzers, which is typically in the kHz range and slower. This scheme demonstrates remarkable versatility in performing real-time spectral analysis of DWDM signals across diverse operational conditions, including different modulation formats, bit rates (accommodating up to several hundred Gb/s per channel), various dispersion values in the optical link, and channel spacings from 50 GHz to 100 GHz spanning the entire C-band. The comprehensive evaluation reported here underscores the system's adaptability to diverse network configurations and transmission parameters, positioning it as a powerful tool for advanced optical network monitoring.
- 27 February 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (5) , 1245-1248
Fiber-optic spectrum monitoring of wavelength-division-multiplexed telecommunication signals with MHz update rates
We propose a novel (to our knowledge) and simple real-time optical monitoring (RTOM) system for dynamic spectral analysis of telecommunication signals, involving electro-optic (EO) temporal sampling followed by dispersion-induced frequency-to-time mapping and high-speed photodetection. This system enables tracking of the presence and relative intensity of multiple wavelength-division-multiplexed (WDM) data streams that span over a broad frequency band with high resolution, accuracy, and fast measurement update rates. We derive the design conditions and trade-offs of the proposed scheme and report proof-of-concept experiments and a numerical result that demonstrate successful spectral monitoring of dense-WDM signals with different modulation formats and bit rates, over the full C-band, with the needed resolution to discern channels separated by a few tens of GHz, and with an unprecedented fast measurement update rate in the MHz range.
- 27 February 2024
- Published by Optica Publishing Group in Optics Letters
- Vol. 49 (5) , 1245-1248
Fiber-optic spectrum monitoring of wavelength-division-multiplexed telecommunication signals with MHz update rates
We propose a novel (to our knowledge) and simple real-time optical monitoring (RTOM) system for dynamic spectral analysis of telecommunication signals, involving electro-optic (EO) temporal sampling followed by dispersion-induced frequency-to-time mapping and high-speed photodetection. This system enables tracking of the presence and relative intensity of multiple wavelength-division-multiplexed (WDM) data streams that span over a broad frequency band with high resolution, accuracy, and fast measurement update rates. We derive the design conditions and trade-offs of the proposed scheme and report proof-of-concept experiments and a numerical result that demonstrate successful spectral monitoring of dense-WDM signals with different modulation formats and bit rates, over the full C-band, with the needed resolution to discern channels separated by a few tens of GHz, and with an unprecedented fast measurement update rate in the MHz range.
- 1 January 2024
- Published by Optica Publishing Group
- p. Tu3H.2
Semi-Analytical Methodology for Advanced Filter Design in Chirped-Managed Lasers
We introduce a novel semi-analytical method for the deterministic design of advanced optical filters in chirped-managed lasers (CMLs), enhancing transmission reach for access networks. This approach can be applied to any baud rate of NRZ and PAM-4, overcoming previous trial-and-error methods.
- 1 January 2024
- Published by Optica Publishing Group
- p. Tu3H.2
Semi-Analytical Methodology for Advanced Filter Design in Chirped-Managed Lasers
We introduce a novel semi-analytical method for the deterministic design of advanced optical filters in chirped-managed lasers (CMLs), enhancing transmission reach for access networks. This approach can be applied to any baud rate of NRZ and PAM-4, overcoming previous trial-and-error methods.
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (7) , 2351-2361
Chirped Managed Laser for Multilevel Modulation Formats: A Semi-Analytical Approach for Efficient Filter Design
The performance of a directly modulated laser (DML) in a direct detect system is greatly impaired by its inherent frequency chirp and chromatic dispersion of the optical fiber, limiting both transmission speed and reach. Chirped managed lasers (CMLs) were introduced as a solution to extend the transmission reach and improve receiver sensitivity by tailoring the spectrum of the DML using an optical filter. In this work, we present a simple semi-analytical approach for deterministically designing the optical filter for CMLs. This approach can be applied to design the filter for both non-return-to-zero (NRZ) and multi-level modulation formats (e.g., PAM4). We also show that as the modulation speed increases, optical filtering alone may not be sufficient to extend the reach and efficient digital signal processing (DSP) should be utilized as well. With the aid of a proper optical filter and DSP, we experimentally demonstrate 35 Gbaud PAM4 transmission over 20 km of standard single mode fiber, showing the potential of a low-cost C-band DML-based transceiver solution.
- 20 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in Journal of Lightwave Technology
- Vol. 42 (7) , 2351-2361
Chirped Managed Laser for Multilevel Modulation Formats: A Semi-Analytical Approach for Efficient Filter Design
The performance of a directly modulated laser (DML) in a direct detect system is greatly impaired by its inherent frequency chirp and chromatic dispersion of the optical fiber, limiting both transmission speed and reach. Chirped managed lasers (CMLs) were introduced as a solution to extend the transmission reach and improve receiver sensitivity by tailoring the spectrum of the DML using an optical filter. In this work, we present a simple semi-analytical approach for deterministically designing the optical filter for CMLs. This approach can be applied to design the filter for both non-return-to-zero (NRZ) and multi-level modulation formats (e.g., PAM4). We also show that as the modulation speed increases, optical filtering alone may not be sufficient to extend the reach and efficient digital signal processing (DSP) should be utilized as well. With the aid of a proper optical filter and DSP, we experimentally demonstrate 35 Gbaud PAM4 transmission over 20 km of standard single mode fiber, showing the potential of a low-cost C-band DML-based transceiver solution.
- 12 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Real-time Optical Monitoring of Telecom Data Signals Utilizing Dispersive Fourier Transformation
We propose a real-time optical monitoring (RTOM) system for dynamic spectral analysis of wavelength-division-multiplexed (WDM) telecommunication data streams over broad frequency bands (e.g., full C-band), employing a temporal periodic sampling and dispersive delay scheme. The proposed design is validated through proof-of-concept experiments.
- 12 November 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-2
Real-time Optical Monitoring of Telecom Data Signals Utilizing Dispersive Fourier Transformation
We propose a real-time optical monitoring (RTOM) system for dynamic spectral analysis of wavelength-division-multiplexed (WDM) telecommunication data streams over broad frequency bands (e.g., full C-band), employing a temporal periodic sampling and dispersive delay scheme. The proposed design is validated through proof-of-concept experiments.
- 20 January 2022
- Published by Optica Publishing Group in Optica
- Vol. 9 (1) , 130-138
Optical signal denoising through temporal passive amplification
Mitigating the stochastic noise introduced during the generation, transmission, and detection of temporal optical waveforms remains a significant challenge across many applications, including radio-frequency photonics, light-based telecommunications, spectroscopy, etc. The problem is particularly difficult for the weak-intensity signals often found in practice. Active amplification worsens the signal-to-noise ratio, whereas noise mitigation based on optical bandpass filtering attenuates further the waveform of interest. Additionally, current optical filtering approaches are not optimal for signal bandwidths narrower than just a few GHz. We propose a versatile concept for simultaneous amplification and noise mitigation of temporal waveforms, here successfully demonstrated on optical signals with bandwidths spanning several orders of magnitude, from the kHz to GHz scale. The concept is based on lossless temporal sampling of the incoming coherent waveform through Talbot processing. By reaching high gain factors (), we show the recovery of ultra-weak optical signals, with power levels below the detector threshold, additionally buried under a much stronger noise background. The method is inherently self-tracking, a capability demonstrated by simultaneously denoising four data signals in a dense wavelength division multiplexing scheme.- 20 January 2022
- Published by Optica Publishing Group in Optica
- Vol. 9 (1) , 130-138
Optical signal denoising through temporal passive amplification
Mitigating the stochastic noise introduced during the generation, transmission, and detection of temporal optical waveforms remains a significant challenge across many applications, including radio-frequency photonics, light-based telecommunications, spectroscopy, etc. The problem is particularly difficult for the weak-intensity signals often found in practice. Active amplification worsens the signal-to-noise ratio, whereas noise mitigation based on optical bandpass filtering attenuates further the waveform of interest. Additionally, current optical filtering approaches are not optimal for signal bandwidths narrower than just a few GHz. We propose a versatile concept for simultaneous amplification and noise mitigation of temporal waveforms, here successfully demonstrated on optical signals with bandwidths spanning several orders of magnitude, from the kHz to GHz scale. The concept is based on lossless temporal sampling of the incoming coherent waveform through Talbot processing. By reaching high gain factors (), we show the recovery of ultra-weak optical signals, with power levels below the detector threshold, additionally buried under a much stronger noise background. The method is inherently self-tracking, a capability demonstrated by simultaneously denoising four data signals in a dense wavelength division multiplexing scheme.- 1 January 2022
- Published by Optica Publishing Group
- Vol. 13, Th2A.27
Simultaneous Noise Mitigation of Wavelength-multiplexed Signals by Self-tracking Passive Amplification
We demonstrate the self-tracking abilities of Talbot-based denoising by simultaneously processing 4 signals in a WDM scheme using a single device, without stabilization or alignment procedures, enabling significant BER and SNR improvements in all channels.
- 1 January 2022
- Published by Optica Publishing Group
- Vol. 13, Th2A.27
Simultaneous Noise Mitigation of Wavelength-multiplexed Signals by Self-tracking Passive Amplification
We demonstrate the self-tracking abilities of Talbot-based denoising by simultaneously processing 4 signals in a WDM scheme using a single device, without stabilization or alignment procedures, enabling significant BER and SNR improvements in all channels.
- Open Access
- 17 November 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-8
Frequency-domain ultrafast passive logic: NOT and XNOR gates
Electronic Boolean logic gates, the foundation of current computation and digital information processing, are reaching final limits in processing power. The primary obstacle is energy consumption which becomes impractically large, > 0.1 fJ/bit per gate, for signal speeds just over several GHz. Unfortunately, current solutions offer either high-speed operation or low-energy consumption. We propose a design for Boolean logic that can achieve both simultaneously (high speed and low consumption), here demonstrated for NOT and XNOR gates. Our method works by passively modifying the phase relationships among the different frequencies of an input data signal to redistribute its energy into the desired logical output pattern. We experimentally demonstrate a passive NOT gate with an energy dissipation of ~1 fJ/bit at 640 Gb/s and use it as a building block for an XNOR gate. This approach is applicable to any system that can propagate coherent waves, such as electromagnetic, acoustic, plasmonic, mechanical, or quantum.
- 17 November 2020
- Published by Springer Nature in Nature Communications
- Vol. 11 (1) , 1-8
Open AccessFrequency-domain ultrafast passive logic: NOT and XNOR gates
Electronic Boolean logic gates, the foundation of current computation and digital information processing, are reaching final limits in processing power. The primary obstacle is energy consumption which becomes impractically large, > 0.1 fJ/bit per gate, for signal speeds just over several GHz. Unfortunately, current solutions offer either high-speed operation or low-energy consumption. We propose a design for Boolean logic that can achieve both simultaneously (high speed and low consumption), here demonstrated for NOT and XNOR gates. Our method works by passively modifying the phase relationships among the different frequencies of an input data signal to redistribute its energy into the desired logical output pattern. We experimentally demonstrate a passive NOT gate with an energy dissipation of ~1 fJ/bit at 640 Gb/s and use it as a building block for an XNOR gate. This approach is applicable to any system that can propagate coherent waves, such as electromagnetic, acoustic, plasmonic, mechanical, or quantum.
- 23 April 2020
- Published by Optica Publishing Group in Photonics Research
- Vol. 8 (5) , 659-670
Fully reversible spectral compression of arbitrary pulsed data signals
Data signals consisting of arbitrarily modulated sequences of pulses are extensively used for processing and communication applications. The spectral extent of such signals is determined by the bandwidth of the individual pulses in the sequence, which imposes a fundamental limit to the maximum amount of information that can be transmitted or processed per time period. In this work, we propose and experimentally demonstrate that the frequency spectrum occupied by a data-modulated pulse sequence can be significantly compressed to well below the individual pulse bandwidth while still maintaining the temporal duration of the pulses in the sequence and without losing any of the information carried by the signal. The proposed method involves fully reversible linear transformations of the data signal along the time and frequency domains. We demonstrate successful pulse-shape-preserving spectral compression and subsequent full waveform and information recovery of a ∼ 10 Gb / s optical pulse sequence, modulated by an arbitrary data pattern, liberating over 60% of its bandwidth. These findings should prove useful for applications in signal processing, communications, and others.
- 23 April 2020
- Published by Optica Publishing Group in Photonics Research
- Vol. 8 (5) , 659-670
Fully reversible spectral compression of arbitrary pulsed data signals
Data signals consisting of arbitrarily modulated sequences of pulses are extensively used for processing and communication applications. The spectral extent of such signals is determined by the bandwidth of the individual pulses in the sequence, which imposes a fundamental limit to the maximum amount of information that can be transmitted or processed per time period. In this work, we propose and experimentally demonstrate that the frequency spectrum occupied by a data-modulated pulse sequence can be significantly compressed to well below the individual pulse bandwidth while still maintaining the temporal duration of the pulses in the sequence and without losing any of the information carried by the signal. The proposed method involves fully reversible linear transformations of the data signal along the time and frequency domains. We demonstrate successful pulse-shape-preserving spectral compression and subsequent full waveform and information recovery of a ∼ 10 Gb / s optical pulse sequence, modulated by an arbitrary data pattern, liberating over 60% of its bandwidth. These findings should prove useful for applications in signal processing, communications, and others.
- Open Access
- 4 November 2019
- Published by Wiley in Laser & Photonics Reviews
- Vol. 13 (12)
Arbitrary Energy‐Preserving Control of Optical Pulse Trains and Frequency Combs through Generalized Talbot Effects
Trains of optical pulses and optical‐frequency combs are periodic waveforms with deep implications for a wide range of scientific disciplines and technological applications. Recently, phase‐only signal‐processing techniques based upon the theory of Talbot self‐imaging have been demonstrated as simple and practical means for user‐defined periodicity control of optical pulse trains and combs. The resulting schemes implement a desired repetition period control without introducing any noise or distortion, while ideally preserving the entire energy content of the signal. Here, recent developments on phase‐only signal‐processing schemes for periodicity control based on temporal and spectral self‐imaging are reviewed. As a central contribution, a comprehensive theory of generalized Talbot self‐imaging, so called phase‐controlled Talbot effect, is presented, comprising all the different approaches proposed to date. In particular, a closed unified mathematical framework for the design of the spectral and temporal phase manipulations that enable full arbitrary control of the period of repetitive signals is developed. The reported numerical studies fully validate the presented theoretical framework and shed light on crucial aspects of the proposed methods, consistently with previously reported experimental results. Important considerations concerning the practical, real‐world implementation of the described schemes, according to the needed specifications for different applications, are also discussed.
- 4 November 2019
- Published by Wiley in Laser & Photonics Reviews
- Vol. 13 (12)
Open AccessArbitrary Energy‐Preserving Control of Optical Pulse Trains and Frequency Combs through Generalized Talbot Effects
Trains of optical pulses and optical‐frequency combs are periodic waveforms with deep implications for a wide range of scientific disciplines and technological applications. Recently, phase‐only signal‐processing techniques based upon the theory of Talbot self‐imaging have been demonstrated as simple and practical means for user‐defined periodicity control of optical pulse trains and combs. The resulting schemes implement a desired repetition period control without introducing any noise or distortion, while ideally preserving the entire energy content of the signal. Here, recent developments on phase‐only signal‐processing schemes for periodicity control based on temporal and spectral self‐imaging are reviewed. As a central contribution, a comprehensive theory of generalized Talbot self‐imaging, so called phase‐controlled Talbot effect, is presented, comprising all the different approaches proposed to date. In particular, a closed unified mathematical framework for the design of the spectral and temporal phase manipulations that enable full arbitrary control of the period of repetitive signals is developed. The reported numerical studies fully validate the presented theoretical framework and shed light on crucial aspects of the proposed methods, consistently with previously reported experimental results. Important considerations concerning the practical, real‐world implementation of the described schemes, according to the needed specifications for different applications, are also discussed.