Mykola Zotsenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Mykola Zotsenko has a total of 26 co-authors. Here are the top co-authors by number of shared publications:
- Yuriy Vynnykov
National University “Yuri Kondratyuk Poltava Polytechnic
8 shared publications - Maksym Kharchenko
National University “Yuri Kondratyuk Poltava Polytechnic
5 shared publications - Olena Mykhailovska
National University «Yuri Kondratyuk Poltava Polytechnic
5 shared publications - Aleksej Aniskin
Department of Civil Engineering, University North, 42000 Varaždin, Croatia
3 shared publications - Iryna Lartseva
National University «Yuri Kondratyuk Poltava Polytechnic
2 shared publications - Andrey Shokarev
Кандидат технічних наук, завідувач лабораторії Державного підприємства «Науково-дослідний інститут будівельних конструкцій», Київ
1 shared publication
Latest Publications
- Open Access
- 19 June 2023
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 1 (60) , 76-83
Applied problems of penetration of sedimentary rocks
A number of topical applied problems on studying the physical and mechanical characteristics of sedimentary rocks using the already sufficiently tested high-speed penetration method are considered, such as: the influence of tip sizes on the value of the static probing index of sands; the influence of the surface quality of conical tips on the results of penetration and probing; improvement of the tip for penetrating rocks with anisotropic properties. New practical possibilities of using the equations of the relationship between the physical properties of rocks and their mechanical parameters, in particular, the specific resistance to penetration or the penetration index, to generalize the results of experiments are shown.
- 19 June 2023
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 1 (60) , 76-83
Open AccessApplied problems of penetration of sedimentary rocks
A number of topical applied problems on studying the physical and mechanical characteristics of sedimentary rocks using the already sufficiently tested high-speed penetration method are considered, such as: the influence of tip sizes on the value of the static probing index of sands; the influence of the surface quality of conical tips on the results of penetration and probing; improvement of the tip for penetrating rocks with anisotropic properties. New practical possibilities of using the equations of the relationship between the physical properties of rocks and their mechanical parameters, in particular, the specific resistance to penetration or the penetration index, to generalize the results of experiments are shown.
- 17 December 2022
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (59) , 86-91
Correlation equation between physical and mechanical properties of sedimentary rocks
The results of parallel experimental studies of the physical and mechanical properties of sedimentary rocks of natural structure, including their penetration tests, are presented. The possibility of establishing empirical equations of the relationship between the physical (soil skeleton density and moisture content) and mechanical (specific resistance to penetration, angle of internal friction, specific adhesion, deformation modulus) characteristics of cohesive (on the example of light dusty loams of loess origin) and non-cohesive (on the example of fine sands, quartz) sedimentary rocks of natural structure is tested. It is noted that such equations are correct only for genetically identical types of sedimentary rocks
- 17 December 2022
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (59) , 86-91
Correlation equation between physical and mechanical properties of sedimentary rocks
The results of parallel experimental studies of the physical and mechanical properties of sedimentary rocks of natural structure, including their penetration tests, are presented. The possibility of establishing empirical equations of the relationship between the physical (soil skeleton density and moisture content) and mechanical (specific resistance to penetration, angle of internal friction, specific adhesion, deformation modulus) characteristics of cohesive (on the example of light dusty loams of loess origin) and non-cohesive (on the example of fine sands, quartz) sedimentary rocks of natural structure is tested. It is noted that such equations are correct only for genetically identical types of sedimentary rocks
- Open Access
- 30 June 2022
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 3 (3(65)) , 26-30
Development of a method of utilization of oil and gas industry waste at Pereshchepyno field (Ukraine)
The object of research is the technological solutions for the construction of sludge barns at the Pereschepyno field (Ukraine). One of the most problematic places is the lack of reliable insulation of sludge barns and storage facilities. The study used a screen type «wall in the soil» of elements of soil cement, which prevents the filtration of the aqueous phase. The screen was built monolithic. It is proposed to arrange the shade between the centers of the curtain equal to 0.8 of the diameter of the element. It is proposed to make elements from soil cement by the brown-mixing method. After 28 days (hardening of the elements) up to 60 % of the soil was removed from the waste storage area. This is due to the fact that the proposed method of arrangement of waste storage has a number of features. Over time, the strength and permeability of the aqueous phase of soil cement increase. It is proposed to fill the storage with drilling waste after the enclosing elements have hardened. In order for the soil to have a suitable humidity of 4–5 %, it is proposed to dry it outdoors. It is proposed to build a cover over the soil dump. If the optimum humidity of the mixture is not obtained after drying and mixing the waste with the soil, it is proposed to add a drying additive (ash removal of Mykolayiv thermal power plant). The amount of additive is from 1.5 to 3 % depending on the type of soil. Next, it is proposed to seal the layers of sludge and loam by rammers. After compaction, the operation is repeated. Compaction of soil layers is proposed to be carried out at optimum humidity. In comparison with similar known methods, this method provides the following advantages: low cost of manufacture due to the use of a waterproof layer of soil as the bottom of the structure; high water resistance – W12; high compressive strength; environmental safety and durability.
- 30 June 2022
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 3 (3(65)) , 26-30
Open AccessDevelopment of a method of utilization of oil and gas industry waste at Pereshchepyno field (Ukraine)
The object of research is the technological solutions for the construction of sludge barns at the Pereschepyno field (Ukraine). One of the most problematic places is the lack of reliable insulation of sludge barns and storage facilities. The study used a screen type «wall in the soil» of elements of soil cement, which prevents the filtration of the aqueous phase. The screen was built monolithic. It is proposed to arrange the shade between the centers of the curtain equal to 0.8 of the diameter of the element. It is proposed to make elements from soil cement by the brown-mixing method. After 28 days (hardening of the elements) up to 60 % of the soil was removed from the waste storage area. This is due to the fact that the proposed method of arrangement of waste storage has a number of features. Over time, the strength and permeability of the aqueous phase of soil cement increase. It is proposed to fill the storage with drilling waste after the enclosing elements have hardened. In order for the soil to have a suitable humidity of 4–5 %, it is proposed to dry it outdoors. It is proposed to build a cover over the soil dump. If the optimum humidity of the mixture is not obtained after drying and mixing the waste with the soil, it is proposed to add a drying additive (ash removal of Mykolayiv thermal power plant). The amount of additive is from 1.5 to 3 % depending on the type of soil. Next, it is proposed to seal the layers of sludge and loam by rammers. After compaction, the operation is repeated. Compaction of soil layers is proposed to be carried out at optimum humidity. In comparison with similar known methods, this method provides the following advantages: low cost of manufacture due to the use of a waterproof layer of soil as the bottom of the structure; high water resistance – W12; high compressive strength; environmental safety and durability.
- Open Access
- 24 December 2021
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (57) , 124-129
Technological solution of oil and gas waste disposal
Technological solutions for the construction of sludge barns at the Pereschepynskoye deposit are considered and analyzed. The authors proposed to arrange a monolithic vertical anti-filtration curtain of the type "wall in the soil" of soil-cement elements. When filling the sludge storage, it is proposed to fill with waste using the following technology: pour a layer of waste about 1 m thick on the bottom of the sludge storage, then pour a layer of soil on top of the construction site (humidity 4-5%) up to 1 m. drying it is offered to add ash of removal of the Mykolaiv thermal power plant. The amount of additive is from 1.5 to 3% depending on the type of soil. The thickness of the layers is selected and calculated to obtain the optimum moisture content of the sludge and soil mixture
- 24 December 2021
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (57) , 124-129
Open AccessTechnological solution of oil and gas waste disposal
Technological solutions for the construction of sludge barns at the Pereschepynskoye deposit are considered and analyzed. The authors proposed to arrange a monolithic vertical anti-filtration curtain of the type "wall in the soil" of soil-cement elements. When filling the sludge storage, it is proposed to fill with waste using the following technology: pour a layer of waste about 1 m thick on the bottom of the sludge storage, then pour a layer of soil on top of the construction site (humidity 4-5%) up to 1 m. drying it is offered to add ash of removal of the Mykolaiv thermal power plant. The amount of additive is from 1.5 to 3% depending on the type of soil. The thickness of the layers is selected and calculated to obtain the optimum moisture content of the sludge and soil mixture
- Open Access
- 21 December 2021
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 6 (1(62)) , 43-47
Increase of dynamic stability of a basis at operation of the compressor equipment of the Abazіvka unit of complex gas preparation
The object of research is the basis of the compressor equipment of the complex gas treatment plant at the Abazivka field and the strengthening of the base soils with soil-cement elements, which are proposed to be arranged with the use of drilling technology. The research area is located on the territory of the current Abazivka Integrated Gas Preparation, near the village of Bugaivka, Poltava region, Ukraine. Abazivka Integrated Gas Preparation receives products from wells in Abazivka and Sementsivske deposits. It is proposed to carry out the reconstruction of Integrated Gas Preparation, which includes strengthening the foundation of the compressor model C1004-JGT/2-1 manufactured by «Propak» (Alberta, Canada). The amplitudes of oscillations of the compressor foundation were determined at a speed of 1400 rpm at the appropriate site with geological conditions. The magnitudes of oscillations and subsidence of the compressor foundation of the Abazivka complex of complex gas treatment were investigated experimentally. When determining the amplitudes of oscillations of the compressor foundations, only the amplitudes of oscillations in the direction parallel to the sliding of the pistons were calculated, and the influence of the vertical component of the perturbing forces was not taken into account. It is established that the amplitude of horizontal-rotational oscillations of the upper face of the compressor foundation relative to the horizontal axis exceeds the maximum allowable. It is substantiated that soil cement is a sufficiently strong and waterproof material that can be used to strengthen the base during the construction of equipment foundations. The possibility of application of the technology of application of soil-cement piles, made by brown-mixing technology for strengthening the base under the foundation of the compressor, is described and investigated. It is proposed to reinforce the base with rows of soil-cement elements, which will increase the modulus of deformation of the base, which is represented by loam, light to 14.3 MPa. In the case of strengthening the base, the amplitude of horizontal-rotational oscillations of the upper face of the compressor foundation is much less than the maximum allowable 0.1 mm. The subsidence of the foundation at reinforcement of the base, which does not exceed the maximum allowable value, is determined. Soil-cement elements are proposed to be arranged according to the drilling technology.
- 21 December 2021
- Published by Private Company Technology Center in Technology audit and production reserves
- Vol. 6 (1(62)) , 43-47
Open AccessIncrease of dynamic stability of a basis at operation of the compressor equipment of the Abazіvka unit of complex gas preparation
The object of research is the basis of the compressor equipment of the complex gas treatment plant at the Abazivka field and the strengthening of the base soils with soil-cement elements, which are proposed to be arranged with the use of drilling technology. The research area is located on the territory of the current Abazivka Integrated Gas Preparation, near the village of Bugaivka, Poltava region, Ukraine. Abazivka Integrated Gas Preparation receives products from wells in Abazivka and Sementsivske deposits. It is proposed to carry out the reconstruction of Integrated Gas Preparation, which includes strengthening the foundation of the compressor model C1004-JGT/2-1 manufactured by «Propak» (Alberta, Canada). The amplitudes of oscillations of the compressor foundation were determined at a speed of 1400 rpm at the appropriate site with geological conditions. The magnitudes of oscillations and subsidence of the compressor foundation of the Abazivka complex of complex gas treatment were investigated experimentally. When determining the amplitudes of oscillations of the compressor foundations, only the amplitudes of oscillations in the direction parallel to the sliding of the pistons were calculated, and the influence of the vertical component of the perturbing forces was not taken into account. It is established that the amplitude of horizontal-rotational oscillations of the upper face of the compressor foundation relative to the horizontal axis exceeds the maximum allowable. It is substantiated that soil cement is a sufficiently strong and waterproof material that can be used to strengthen the base during the construction of equipment foundations. The possibility of application of the technology of application of soil-cement piles, made by brown-mixing technology for strengthening the base under the foundation of the compressor, is described and investigated. It is proposed to reinforce the base with rows of soil-cement elements, which will increase the modulus of deformation of the base, which is represented by loam, light to 14.3 MPa. In the case of strengthening the base, the amplitude of horizontal-rotational oscillations of the upper face of the compressor foundation is much less than the maximum allowable 0.1 mm. The subsidence of the foundation at reinforcement of the base, which does not exceed the maximum allowable value, is determined. Soil-cement elements are proposed to be arranged according to the drilling technology.
- 23 September 2021
- Published by Springer Nature
- p. 457-464
Influence of Fly Ash Additives on Strength Characteristics of Soil–Cement as a Material for Waste Storage Construction
- 23 September 2021
- Published by Springer Nature
- p. 457-464
Influence of Fly Ash Additives on Strength Characteristics of Soil–Cement as a Material for Waste Storage Construction
- 14 June 2020
- Published by Springer Nature
- p. 325-334
Construction Features Durable Storage of Toxic Waste in Boreholes
- 14 June 2020
- Published by Springer Nature
- p. 325-334
Construction Features Durable Storage of Toxic Waste in Boreholes
- Open Access
- 12 October 2018
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (51) , 5-18
Improving proposals for design standards of vertical cylindrical steel tanks for oil and oil products storage
The calculation of subsidence points along the contour and in the center of the tank bottom is complicated in the case of erosion on inhomogeneous, subsidence, damaged soils, mules, flooded and seismically dangerous areas. The article analyzes the most dangerous geological phenomena, processes and complicated geotechnical conditions for the territory of Ukraine. The method of an artificial base arrangement with improved properties due to vertical reinforcement by soil cement elements is considered. Techno-economic comparison of the proposed variant with the usual pile variant of foundations (subsidence soils, estimated seismic intensity of 9 points) has been carried out. Probabilistic analysis of the artificial base has been carried out and the corellation between the probability of its failure from the percentage of reinforcement has been determined.
- 12 October 2018
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (51) , 5-18
Open AccessImproving proposals for design standards of vertical cylindrical steel tanks for oil and oil products storage
The calculation of subsidence points along the contour and in the center of the tank bottom is complicated in the case of erosion on inhomogeneous, subsidence, damaged soils, mules, flooded and seismically dangerous areas. The article analyzes the most dangerous geological phenomena, processes and complicated geotechnical conditions for the territory of Ukraine. The method of an artificial base arrangement with improved properties due to vertical reinforcement by soil cement elements is considered. Techno-economic comparison of the proposed variant with the usual pile variant of foundations (subsidence soils, estimated seismic intensity of 9 points) has been carried out. Probabilistic analysis of the artificial base has been carried out and the corellation between the probability of its failure from the percentage of reinforcement has been determined.
- Open Access
- 12 October 2018
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (51) , 156-160
Reinforcement of the foundation base of the building with horizontal elements of increased rigidity
A method for reducing the uneven deformations of a two-story building, which provides improving the construction properties of weak soils that lie at the base, by reinforcing them with horizontal soil-cement elements (SCE) of increased rigidity, carried out using a sand mixing technology, is described. SCEs are created in the mass under the base of the foundations and are formed as a result of the destruction of soil natural structure with its simultaneous mixing and injection of cement mortar under pressure. It has been established that the manufacture of SCE has a number of advantages: using of local soil as a material for their manufacture; adding to the soil only water and a binder, without additional aggregate; installation of elements on the site.
- 12 October 2018
- Published by Yuri Kondratyuk Poltava Polytechnic in Збірник наукових праць Галузеве машинобудування будівництво/ Academic journal Industrial Machine Building Civil Engineering
- Vol. 2 (51) , 156-160
Open AccessReinforcement of the foundation base of the building with horizontal elements of increased rigidity
A method for reducing the uneven deformations of a two-story building, which provides improving the construction properties of weak soils that lie at the base, by reinforcing them with horizontal soil-cement elements (SCE) of increased rigidity, carried out using a sand mixing technology, is described. SCEs are created in the mass under the base of the foundations and are formed as a result of the destruction of soil natural structure with its simultaneous mixing and injection of cement mortar under pressure. It has been established that the manufacture of SCE has a number of advantages: using of local soil as a material for their manufacture; adding to the soil only water and a binder, without additional aggregate; installation of elements on the site.