Mor Mordechai Peretz
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Mor Mordechai Peretz has a total of 91 co-authors. Here are the top co-authors by number of shared publications:
- Shmuel Ben-Yaakov
Ben-Gurion University of the Negev, Beer-Sheva, Israel
24 shared publications Alon Cervera
The Center for Power Electronics and Mixed-Signal IC, Department of Electrical and Computer Engineering, Ben-Gurion University of the Negev, P.O. Box 653, Beer-Sheva, 8410501 Israel
18 shared publicationsOr Kirshenboim
The Center for Power Electronics and Mixed-Signal IC, Department of Electrical and Computer Engineering, Ben-Gurion University of the Negev, P.O. Box 653, Beer-Sheva, 8410501 Israel
12 shared publications- Alon Kuperman
Applied Energy Laboratory Ben‐Gurion University of the Negev Beer‐Sheva Israel
9 shared publications - Michael Evzelman
Center for Power Electronics and Mixed-Signal IC, The School of Electrical and Computer Engineering, Ben-Gurion University of the Negev, Beer-Sheva 8410501, Israel
9 shared publications Eli Abramov
The Center for Power Electronics and Mixed-Signal IC, Department of Electrical and Computer Engineering, Ben-Gurion University of the Negev, P.O. Box 653, Beer-Sheva, 8410501 Israel
8 shared publications
Latest Publications
- Open Access
- 30 September 2026
- Published by Scilight Press Pty Ltd in Power Electronics Research and Applications Transactions
Extending Conversion Ratio of a Series-Capacitor Buck Topology by Adding N Capacitor Cells
This paper introduces an extension methodology for modular multi-phase series-capacitor buck converter that enables scaling to an arbitrary number of capacitor cells, with minimum operation states and minimum topological subcircuits. By distributing the voltage conversion across multiple capacitive stages, the new design reduces device voltage stress and improves overall efficiency. The converter extension using a basic capacitor cell enables a highly modular architecture with a minimal component count and distinguished subcircuits while supporting high conversion ratios. The interaction between the capacitor and the inductor results in a soft charging operation, which reduces the losses of the converter, and contributes to higher efficiency. Additional features of the new converter include a significantly extended effective duty ratio, reduced inductor and output current ripple, high output current capability, and architecture-inherent output current sharing that balances the loading between the phases. Simulation and experimental results obtained from a modular, interleaved-two-phase, three-capacitor-cell prototype validate the developed methodology and demonstrate strong agreement with the theoretical analyses.
- 30 September 2026
- Published by Scilight Press Pty Ltd in Power Electronics Research and Applications Transactions
Open AccessExtending Conversion Ratio of a Series-Capacitor Buck Topology by Adding N Capacitor Cells
This paper introduces an extension methodology for modular multi-phase series-capacitor buck converter that enables scaling to an arbitrary number of capacitor cells, with minimum operation states and minimum topological subcircuits. By distributing the voltage conversion across multiple capacitive stages, the new design reduces device voltage stress and improves overall efficiency. The converter extension using a basic capacitor cell enables a highly modular architecture with a minimal component count and distinguished subcircuits while supporting high conversion ratios. The interaction between the capacitor and the inductor results in a soft charging operation, which reduces the losses of the converter, and contributes to higher efficiency. Additional features of the new converter include a significantly extended effective duty ratio, reduced inductor and output current ripple, high output current capability, and architecture-inherent output current sharing that balances the loading between the phases. Simulation and experimental results obtained from a modular, interleaved-two-phase, three-capacitor-cell prototype validate the developed methodology and demonstrate strong agreement with the theoretical analyses.
- Open Access
- 3 July 2026
- Published by MDPI AG in Technologies
- Vol. 14 (7) , 408
Feasibility Evaluation of Capacitorless Active Switching Ripple-Suppressing Branch for Power Converters Interfacing Ripple-Sensitive Loads
Active ripple suppression branches (ARSBs) are widely employed in switching power converters interfacing ripple-sensitive devices such as batteries, supercapacitors, hydrogen electrolyzers, fuel cells, and photovoltaic panels. Conventional ARSBs share the main converter DC-link voltage and require inductance comparable to that of the primary power stage, resulting in high semiconductor voltage stress and bulky magnetic components. Recent studies have proposed supplying the ARSB from a lower auxiliary voltage source, significantly reducing both inductance value and semiconductor voltage ratings. This paper shows, however, that lowering the ARSB rating while keeping the series capacitance value unaltered inherently increases residual current ripple, degrading ripple-cancellation performance. It is then demonstrated that this limitation should be overcome by increasing the ARSB capacitance in inverse proportion to the rating reduction, thereby restoring ripple suppression performance. Furthermore, it is revealed that for converters operating at a fixed duty cycle, a unique operating point exists where the ARSB capacitor can be eliminated without sacrificing the ripple attenuation ability of the circuit. The resulting capacitorless implementation reduces component count, size, complexity, and cost while improving ripple suppression. Simulation and experimental results validate the theoretical analysis and confirm the feasibility and effectiveness of the proposed capacitorless open-loop operating ARSB.
- 3 July 2026
- Published by MDPI AG in Technologies
- Vol. 14 (7) , 408
Open AccessFeasibility Evaluation of Capacitorless Active Switching Ripple-Suppressing Branch for Power Converters Interfacing Ripple-Sensitive Loads
Active ripple suppression branches (ARSBs) are widely employed in switching power converters interfacing ripple-sensitive devices such as batteries, supercapacitors, hydrogen electrolyzers, fuel cells, and photovoltaic panels. Conventional ARSBs share the main converter DC-link voltage and require inductance comparable to that of the primary power stage, resulting in high semiconductor voltage stress and bulky magnetic components. Recent studies have proposed supplying the ARSB from a lower auxiliary voltage source, significantly reducing both inductance value and semiconductor voltage ratings. This paper shows, however, that lowering the ARSB rating while keeping the series capacitance value unaltered inherently increases residual current ripple, degrading ripple-cancellation performance. It is then demonstrated that this limitation should be overcome by increasing the ARSB capacitance in inverse proportion to the rating reduction, thereby restoring ripple suppression performance. Furthermore, it is revealed that for converters operating at a fixed duty cycle, a unique operating point exists where the ARSB capacitor can be eliminated without sacrificing the ripple attenuation ability of the circuit. The resulting capacitorless implementation reduces component count, size, complexity, and cost while improving ripple suppression. Simulation and experimental results validate the theoretical analysis and confirm the feasibility and effectiveness of the proposed capacitorless open-loop operating ARSB.
- Open Access
- 25 June 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (13) , 6368
Theoretical Analysis and Optimization of Coupled Inductor for Boost-Extender Topology
A coupling coefficient optimization procedure for a boost-extender topology converter with coupled inductors is presented. The method focuses on minimizing inductor current ripple to reduce losses and improve magnetic core utilization, enabling a potential increase in converter power density. The major innovation of this study is the theoretical formulation of the coupling coefficient and leakage inductance in the UU/UI cores. The study includes a theoretical loss analysis covering two dominant loss mechanisms of the topology. A magnetic core structure enabling current ripple cancelation is presented and analyzed using a reluctance model. To address the analytically intractable field distribution at the core center tap, an empirical leakage model is introduced. The model is validated through ANSYS Maxwell simulations 2023.R1 and corroborated by experimental measurements. The results demonstrate that appropriate coupling coefficient selection significantly suppresses current ripple and enables a more efficient and compact converter design. Simulation and experimental results on experimental prototype of 100 W running at 100 kHz and attaining voltage gain of 20 V to 200 V confirm the accuracy of the models and the effectiveness of the optimization procedures.
- 25 June 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (13) , 6368
Open AccessTheoretical Analysis and Optimization of Coupled Inductor for Boost-Extender Topology
A coupling coefficient optimization procedure for a boost-extender topology converter with coupled inductors is presented. The method focuses on minimizing inductor current ripple to reduce losses and improve magnetic core utilization, enabling a potential increase in converter power density. The major innovation of this study is the theoretical formulation of the coupling coefficient and leakage inductance in the UU/UI cores. The study includes a theoretical loss analysis covering two dominant loss mechanisms of the topology. A magnetic core structure enabling current ripple cancelation is presented and analyzed using a reluctance model. To address the analytically intractable field distribution at the core center tap, an empirical leakage model is introduced. The model is validated through ANSYS Maxwell simulations 2023.R1 and corroborated by experimental measurements. The results demonstrate that appropriate coupling coefficient selection significantly suppresses current ripple and enables a more efficient and compact converter design. Simulation and experimental results on experimental prototype of 100 W running at 100 kHz and attaining voltage gain of 20 V to 200 V confirm the accuracy of the models and the effectiveness of the optimization procedures.
- Open Access
- 17 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (12) , 6818
A High-Conversion Ratio Multiphase Converter Realized with Generic Modular Cells
This paper introduces a high-conversion ratio multiphase nonisolated converter built from generic LC cells. The unique architecture that hinges on a generic capacitor inductor switching module enables the high modularity of the topology, providing a quick extension of the converter design in an interleaved configuration for lower ripple and higher current output. The generic module comprises the basic power components of a nonisolated DC–DC converter, where the unique interaction between the capacitor and the inductor results in a soft charging operation, which curbs the losses of the converter, and contributes to a higher efficiency. Additional features of the new converter include a significantly extended effective duty ratio, and a lower voltage stress on the switches, a very high output current, and architecture-inherent output current sharing that balances the loading between the phases. In addition, a power extension using a paralleling and interleaving approach is presented to provide higher output current capabilities. Simulation and experimental results of a modular interleaved three-phase prototype demonstrate an excellent proof of concept and agree well with the theoretical analyzes developed in this study.
- 17 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (12) , 6818
Open AccessA High-Conversion Ratio Multiphase Converter Realized with Generic Modular Cells
This paper introduces a high-conversion ratio multiphase nonisolated converter built from generic LC cells. The unique architecture that hinges on a generic capacitor inductor switching module enables the high modularity of the topology, providing a quick extension of the converter design in an interleaved configuration for lower ripple and higher current output. The generic module comprises the basic power components of a nonisolated DC–DC converter, where the unique interaction between the capacitor and the inductor results in a soft charging operation, which curbs the losses of the converter, and contributes to a higher efficiency. Additional features of the new converter include a significantly extended effective duty ratio, and a lower voltage stress on the switches, a very high output current, and architecture-inherent output current sharing that balances the loading between the phases. In addition, a power extension using a paralleling and interleaving approach is presented to provide higher output current capabilities. Simulation and experimental results of a modular interleaved three-phase prototype demonstrate an excellent proof of concept and agree well with the theoretical analyzes developed in this study.
- Open Access
- 6 February 2025
- Published by MDPI AG in Electronics
- Vol. 14 (3) , 641
Analog Frontend for Big Data Compression and Instantaneous Failure Prediction in Power Management Systems
An innovative analog frontend for big data collection and intelligent compression as part of an instantaneous failure prediction platform is presented. Failure prediction in power management systems is crucial for increasing uptime and preventing massive failure. Accurate failure prediction, with real-time decision-making, requires data collection from many wide-bandwidth signals within a system, as low-bandwidth information such as DC output voltage is of limited value for decision-making and failure prediction. Analog compression, data profiling, and anomaly detection methods enabled by the unique analog frontend are presented. The system significantly reduces the demand for high computational power, fast communication, and large storage space required for the task. A real-time compression ratio exceeding 100:1 was achieved by the experimental analog frontend, digitizing the analog signal at a rate of 135 MS/s with a 10-bit resolution. The motivation, existing solutions, performance metrics, and advantages of the analog frontend are demonstrated, along with the details of the circuit operation principle. The process of data collection, its intelligent processing using the analog frontend, and anomaly detection are simulated to validate the theoretical hypotheses. For experimental validation, a laboratory setup that includes a dedicated analog frontend prototype and step-down DC-DC converter was built and evaluated to demonstrate the robust performance in sampling and monitoring wide-bandwidth signals and smart data processing using analog frontend for quick decision-making.
- 6 February 2025
- Published by MDPI AG in Electronics
- Vol. 14 (3) , 641
Open AccessAnalog Frontend for Big Data Compression and Instantaneous Failure Prediction in Power Management Systems
An innovative analog frontend for big data collection and intelligent compression as part of an instantaneous failure prediction platform is presented. Failure prediction in power management systems is crucial for increasing uptime and preventing massive failure. Accurate failure prediction, with real-time decision-making, requires data collection from many wide-bandwidth signals within a system, as low-bandwidth information such as DC output voltage is of limited value for decision-making and failure prediction. Analog compression, data profiling, and anomaly detection methods enabled by the unique analog frontend are presented. The system significantly reduces the demand for high computational power, fast communication, and large storage space required for the task. A real-time compression ratio exceeding 100:1 was achieved by the experimental analog frontend, digitizing the analog signal at a rate of 135 MS/s with a 10-bit resolution. The motivation, existing solutions, performance metrics, and advantages of the analog frontend are demonstrated, along with the details of the circuit operation principle. The process of data collection, its intelligent processing using the analog frontend, and anomaly detection are simulated to validate the theoretical hypotheses. For experimental validation, a laboratory setup that includes a dedicated analog frontend prototype and step-down DC-DC converter was built and evaluated to demonstrate the robust performance in sampling and monitoring wide-bandwidth signals and smart data processing using analog frontend for quick decision-making.
- 25 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (1) , 180-197
PFM-PWM Digital Controller for Miniaturized High-Frequency Isolated LLC Converters Integrated in Advanced IoT Devices
This paper introduces a highly-miniaturized soft-switched power supply suitable for advanced IoT applications. It incorporates a HB-LLC resonant converter operating in the MHz range and a new PFM-PWM digital controller that facilitates tight output voltage regulation carried out through a simple voltage loop controller hardware. The switching frequency and the duty-cycle are adjusted simultaneously to enhance output voltage regulation capabilities while full continuity is achieved through a combined pulse-width and frequency modulation scheme and the utilization of a new high-resolution DPWM with time-resolution of a single delay-element. The controller's dual-loop architecture incorporates two PI compensators to guarantee smooth recovery from load transients or input voltage aberrations. The controller accounts for the non-monotonicity attribute of asymmetrically driven LLC resonant converters by carrying out dedicated mitigation sequences for low-Q operation. The operation of the controller is experimentally verified on a 3-7V input HB-LLC converter, demonstrating excellent voltage regulation capabilities and significant reduction of the passive components' stress during start-up.
- 25 September 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 39 (1) , 180-197
PFM-PWM Digital Controller for Miniaturized High-Frequency Isolated LLC Converters Integrated in Advanced IoT Devices
This paper introduces a highly-miniaturized soft-switched power supply suitable for advanced IoT applications. It incorporates a HB-LLC resonant converter operating in the MHz range and a new PFM-PWM digital controller that facilitates tight output voltage regulation carried out through a simple voltage loop controller hardware. The switching frequency and the duty-cycle are adjusted simultaneously to enhance output voltage regulation capabilities while full continuity is achieved through a combined pulse-width and frequency modulation scheme and the utilization of a new high-resolution DPWM with time-resolution of a single delay-element. The controller's dual-loop architecture incorporates two PI compensators to guarantee smooth recovery from load transients or input voltage aberrations. The controller accounts for the non-monotonicity attribute of asymmetrically driven LLC resonant converters by carrying out dedicated mitigation sequences for low-Q operation. The operation of the controller is experimentally verified on a 3-7V input HB-LLC converter, demonstrating excellent voltage regulation capabilities and significant reduction of the passive components' stress during start-up.
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (4) , 4270-4283
All-Digital Integrated Variable-Frequency Variable-Duty-Cycle Modulator With Single-Element Resolution and Single-Cycle Convergence
This paper introduces a new architecture for an all-digital high-resolution variable-frequency variable-duty-cycle modulator for low-power and area-sensitive applications. Constructed through digital standard-cell delay-line and simple combinatorial logic, the modulator produces PWM signals with time-resolution of a single delay-element for both modulation parameters, thus making it a promising candidate for integration in hybrid controllers of high-frequency switched mode power supplies. Since the entire architecture is realized through standard cells, the solution also scales with fabrication technology and is described in HDL which translates onto hardware using automated process. The modulator has been designed on a 0.18μm 5V CMOS process, totaling 0.18mm2 of silicon area as well as on an Altera V FPGA to demonstrate the versatility of the architecture. Experimental results of the FPGA prototype are provided as well as post-layout simulations of the ASIC realization for a variety of mitigation sequences demonstrating single-cycle convergence and time-resolution of 220ps and 200ps, respectively with excellent linearity characteristics.
- 1 May 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (4) , 4270-4283
All-Digital Integrated Variable-Frequency Variable-Duty-Cycle Modulator With Single-Element Resolution and Single-Cycle Convergence
This paper introduces a new architecture for an all-digital high-resolution variable-frequency variable-duty-cycle modulator for low-power and area-sensitive applications. Constructed through digital standard-cell delay-line and simple combinatorial logic, the modulator produces PWM signals with time-resolution of a single delay-element for both modulation parameters, thus making it a promising candidate for integration in hybrid controllers of high-frequency switched mode power supplies. Since the entire architecture is realized through standard cells, the solution also scales with fabrication technology and is described in HDL which translates onto hardware using automated process. The modulator has been designed on a 0.18μm 5V CMOS process, totaling 0.18mm2 of silicon area as well as on an Altera V FPGA to demonstrate the versatility of the architecture. Experimental results of the FPGA prototype are provided as well as post-layout simulations of the ASIC realization for a variety of mitigation sequences demonstrating single-cycle convergence and time-resolution of 220ps and 200ps, respectively with excellent linearity characteristics.
- 7 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (3) , 2755-2766
Analytical Approach to THD Formulation and Optimization in Sine-PWM-Based Single-Phase Multilevel Inverters With Variable DC Ratios
Asymmetric Multilevel Inverters (MLI) with Unequal Voltage Steps (UVS) are often combined with the Staircase Modulation (SCM) technique to improve both voltage and current THD - an approach known as Optimal Minimization of THD (OMTHD). This is usually achieved by varying both the Switching Angles (SA) and the DC source Ratios (DCR), to obtain the desired Modulation Index (MI) while THD is minimized. In this article, a novel Sine-PWM (SPWM) based OMTHD is considered as an alternative to SCM-based OMTHD. Because only the DCRs need to be optimized instead of both SAs and DCRs, the OMTHD process is simplified, while voltage THD, current THD, as well as power efficiency, are improved, especially for the medium-low MI range, compared to conventional SPWM. An analytical formulation of phase-voltage THD for UVS-based SPWM MLIs is derived and utilized for the novel SPWM-based OMTHD. Validation is carried out by theoretical analysis, digital simulations, and real-time C-HIL-based experiments.
- 7 November 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 11 (3) , 2755-2766
Analytical Approach to THD Formulation and Optimization in Sine-PWM-Based Single-Phase Multilevel Inverters With Variable DC Ratios
Asymmetric Multilevel Inverters (MLI) with Unequal Voltage Steps (UVS) are often combined with the Staircase Modulation (SCM) technique to improve both voltage and current THD - an approach known as Optimal Minimization of THD (OMTHD). This is usually achieved by varying both the Switching Angles (SA) and the DC source Ratios (DCR), to obtain the desired Modulation Index (MI) while THD is minimized. In this article, a novel Sine-PWM (SPWM) based OMTHD is considered as an alternative to SCM-based OMTHD. Because only the DCRs need to be optimized instead of both SAs and DCRs, the OMTHD process is simplified, while voltage THD, current THD, as well as power efficiency, are improved, especially for the medium-low MI range, compared to conventional SPWM. An analytical formulation of phase-voltage THD for UVS-based SPWM MLIs is derived and utilized for the novel SPWM-based OMTHD. Validation is carried out by theoretical analysis, digital simulations, and real-time C-HIL-based experiments.
- 20 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Electromagnetic Propulsion System with Rapid Current Discharge Circuit for Enhanced Projectile Acceleration
This paper presents a rapid current discharge circuit for single and multi-stage high current coilgun. The circuit eliminates an undesired braking force, which is developed due to a residual current, when the projectile passes the center point of an energized coil. This is done by rerouting the coil current towards an alternative, quick discharge path, where it is damped to zero. Utilization of the discharge circuit is especially advantageous in multi-stage coilgun systems, as the design of the discharge circuit is done once for the “worst case scenario” and applied to all the coils. It guarantees a safe operation of all the switches, with minor effect on the system performance. The discharge circuit operation has been validated by an experimental prototype rated for 450V, demonstrating rapid coil current discharge for braking force mitigation.
- 20 June 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Electromagnetic Propulsion System with Rapid Current Discharge Circuit for Enhanced Projectile Acceleration
This paper presents a rapid current discharge circuit for single and multi-stage high current coilgun. The circuit eliminates an undesired braking force, which is developed due to a residual current, when the projectile passes the center point of an energized coil. This is done by rerouting the coil current towards an alternative, quick discharge path, where it is damped to zero. Utilization of the discharge circuit is especially advantageous in multi-stage coilgun systems, as the design of the discharge circuit is done once for the “worst case scenario” and applied to all the coils. It guarantees a safe operation of all the switches, with minor effect on the system performance. The discharge circuit operation has been validated by an experimental prototype rated for 450V, demonstrating rapid coil current discharge for braking force mitigation.
- 20 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 492-499
Analysis and Design of Post-Regulation Stages for Resonant Capacitively-Coupled Wireless Power Systems
This study introduces a power regulation design methodology for power receiving units (PRUs) in capacitively-coupled resonant wireless power transfer (RWPT) systems by using hybrid multi-level (HML) post-regulators. A generic design framework for capacitive RWPT systems with post-regulation stages is developed, followed by a simplified behavioral model for the PRU including the additional regulation stage. It has been demonstrated that by using HML stages for power-regulation, significantly wider impedance matching range can be achieved, which results in better spatial freedom of wireless power systems. This study also covers design tradeoffs between several post-regulators in terms of efficiency, coupling range and conversion range. A 40 W experimental resonant capacitively-coupled WPT system with HML buck (HMLB) post-regulator has been designed and examined up to 150 mm misalignment, at a resonant operation of 3 MHz. A very good agreement is obtained between the theoretical predictions and experimental results.
- 20 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 492-499
Analysis and Design of Post-Regulation Stages for Resonant Capacitively-Coupled Wireless Power Systems
This study introduces a power regulation design methodology for power receiving units (PRUs) in capacitively-coupled resonant wireless power transfer (RWPT) systems by using hybrid multi-level (HML) post-regulators. A generic design framework for capacitive RWPT systems with post-regulation stages is developed, followed by a simplified behavioral model for the PRU including the additional regulation stage. It has been demonstrated that by using HML stages for power-regulation, significantly wider impedance matching range can be achieved, which results in better spatial freedom of wireless power systems. This study also covers design tradeoffs between several post-regulators in terms of efficiency, coupling range and conversion range. A 40 W experimental resonant capacitively-coupled WPT system with HML buck (HMLB) post-regulator has been designed and examined up to 150 mm misalignment, at a resonant operation of 3 MHz. A very good agreement is obtained between the theoretical predictions and experimental results.