Sara Lauretta Martin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Sara Lauretta Martin has a total of 55 co-authors. Here are the top co-authors by number of shared publications:
Connie A. Sauder
Ottawa Research and Development Centre, Agriculture and Agri-Food Canada, Ottawa, Ontario, Canada
7 shared publicationsTracey James
Ottawa Research and Development Centre, Agriculture and Agri-Food Canada (AAFC)
7 shared publications- Martin Laforest
Agriculture and Agri‐Food Canada (AAFC), Saint‐Jean‐sur‐Richelieu Research and Development Centre St‐Jean‐sur‐Richelieu QC Canada
6 shared publications - Eric Robert Page
Agriculture and Agri‐Food Canada Harrow Research and Development Centre Harrow Ontario Canada
4 shared publications Linda M. Hall
Agricultural Food and Nutritional Science, University of Alberta, Edmonton, AB, Canada
3 shared publicationsAlyssa Thibodeau
Harrow Research and Development Centre, Agriculture and Agri‐Food Canada Harrow Ontario Canada
2 shared publications
Latest Publications
- Open Access
- 14 August 2026
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 17, 1879767
Commentary: Re-calibration of flow cytometry standards for plant genome size estimation
Soni and Henry (2025) present re-calibrated genome sizes (GS) for flow cytometry (FCM) standards using a newer, more complete genome assembly of Oryza sativa ssp. japonica cv. Nipponbare as a reference genome size estimate. While improving existing standard measures is a laudable goal, the wide-ranging consequences of re-calibration make it essential that the highest stringency in experimental design and data analysis is adhered to. Unfortunately, Soni and Henry (2025) do not meet this standard and their re-calibrated GS estimates should not be used. Soni and Henry (2025) argue that variation among reported GS estimates of plant species used as standards is a consequence of inaccurate calibration procedures. However, while an inaccurate reference value, such as a human GS estimate of 7 pg vs. 6.15 pg, will generate consistently biased GS estimates in taxa referenced to this standard, it does not contribute to variation. Variation in GS estimates within a species is due to a number of welldocumented issues: biological variation among populations, individuals, cell type, and staining characteristics (Bennett and Leitch 2011); technical variation among labs (Dolezel et al. 1998) and protocols (Bainard et al. 2011;Koutecky et al. 2023;Greilhuber 2005;Smarda and Bures 2010). Indeed, recognition of this variation motivated the establishment of specific plant lines as standards (e.g. olomouc.ueb.cas.cz/en/technology/flow-cytometry-1/reference-dna-standards) and the development of best practices (Greilhuber et al. 2007;Sliwinska et al. 2022) that Soni and Henry (2025) have not followed in their FCM work.These best practices for FCM with plant cells differ by application. To ensure that appropriate data is collected, three key factors need to be considered: the number of nuclei sampled per peak, the peak's coefficient of variation, and the internal standard.A sufficient number of nuclei need to be sampled to accurately describe the position of a peak on the FCM histogram, from which DNA content of the nuclei is estimated. When screening plants within a species for ploidy, a low precision requirement, 600 nuclei per peak can be sufficient (Koutecky et al. 2023). Higher precision is required for GS estimation with at least 1000 nuclei measured within the G1 peaks of both sample and internal standard (Sliwinska et al. 2022). The requirement for establishing a new reference standard is higher still. Koutecky et al. (2023) demonstrated that the quality of the estimated mean improved to within 0.5% of the true value for all samples when 1200 nuclei were sampled and to within 0.2% at 4200 events. This is the level of precision that should be targeted for internal standards. The maximum allowable coefficient of variation (CV) or spread of the nuclei in the sample peaks also varies by application. Cytotype screening using dried tissue may have CVs of 5% without causing problems for discrimination (Bainard et al. 2011;Suda and Travnicek 2006). In contrast, estimates of GS typically require CVs of 3% or lower (Temsch et al. 2022).The choice of a plant with a known DNA content to act as an internal standard is also critical for the accuracy of the estimate. The standard's DNA content should be as close as possible to the target DNA without causing overlap in the G1 or G2 peaks, nor differ by more than three-fold. Additionally, the flow cytometer should be adjusted so that the lowest peak is not within the lowest 10% of the fluorescence axis. This can result in event loss (Koutecky et al. 2023).Finally, care also needs to be taken with data analysis. Koutecky et al. (2023) suggest that analysis via model-fitting results in greater accuracy compared to manual gating for establishing GS. Soni and Henry (2025) made the surprising statement that they analyzed their data using manual gating to minimize errors. We were interested in how using the open-source model fitting package flowPloidy in R (Smith et al. 2018) would change the results. This led to the determination that the Soni and Henry (2025) approach to re-calibration is flawed and does not meet best practices.Soni and Henry (2025)'s data files were downloaded from the journal's website and analyzed with flowPloidy (v 1.37.2) in R (v 4.5.2) (R Core Team 2025; Smith et al. 2018). For the fifteen data files, "Tube Name" was used to identify the sample and standard and channel "B_695.40.A" was selected as the fluorescence data. Samples were gated (SI Figure 1) and peaks were called using the model with the best fit (SI Figures 1-21). The ratios between the sample and reference G1 peaks were calculated for comparison with Soni and Henry (2025) (Table 1).Re-calibration of the DNA content of internal reference standards used in FCM is a highly important task that should be completed with the utmost care and high standards informed by the best practices established for GS estimation. Only three of the 15 data files underlying Soni and Henry (2025)'s re-calibration have at least 1000 events per peak, CVs of less than 3%, and avoid violating other best practices (Table 1). Further, while they included three technical replicates, they did not replicate sample-standard pairs. These departures from best practices are sufficient to raise serious concerns about the reliability of the proposed recalibration. More fundamentally, however, reanalysis with flowPloidy uncovered that Soni and Henry (2025) erroneously used Oryza's G2 peak as the sample peak instead of Sorghum's G1 peak. This means that the GS estimates presented for Sorghum, Gossypium, Pisum and Nicotiana are all based on this incorrect ratio. Ratios of close to 2 (or 0.5) should evoke caution as they indicate either an overlap of the standard's G2 and sample's G1 (or vice versa) or misidentification of a G1 peak. Either issue would need to be addressed to produce accurate results. Laurie and Bennett (1985) estimated 2C DNA contents for diploid (1.5 pg) and tetraploid (3.4 pg) Sorghum suggesting that Soni...
- 14 August 2026
- Published by Frontiers Media SA in Frontiers in Plant Science
- Vol. 17, 1879767
Open AccessCommentary: Re-calibration of flow cytometry standards for plant genome size estimation
Soni and Henry (2025) present re-calibrated genome sizes (GS) for flow cytometry (FCM) standards using a newer, more complete genome assembly of Oryza sativa ssp. japonica cv. Nipponbare as a reference genome size estimate. While improving existing standard measures is a laudable goal, the wide-ranging consequences of re-calibration make it essential that the highest stringency in experimental design and data analysis is adhered to. Unfortunately, Soni and Henry (2025) do not meet this standard and their re-calibrated GS estimates should not be used. Soni and Henry (2025) argue that variation among reported GS estimates of plant species used as standards is a consequence of inaccurate calibration procedures. However, while an inaccurate reference value, such as a human GS estimate of 7 pg vs. 6.15 pg, will generate consistently biased GS estimates in taxa referenced to this standard, it does not contribute to variation. Variation in GS estimates within a species is due to a number of welldocumented issues: biological variation among populations, individuals, cell type, and staining characteristics (Bennett and Leitch 2011); technical variation among labs (Dolezel et al. 1998) and protocols (Bainard et al. 2011;Koutecky et al. 2023;Greilhuber 2005;Smarda and Bures 2010). Indeed, recognition of this variation motivated the establishment of specific plant lines as standards (e.g. olomouc.ueb.cas.cz/en/technology/flow-cytometry-1/reference-dna-standards) and the development of best practices (Greilhuber et al. 2007;Sliwinska et al. 2022) that Soni and Henry (2025) have not followed in their FCM work.These best practices for FCM with plant cells differ by application. To ensure that appropriate data is collected, three key factors need to be considered: the number of nuclei sampled per peak, the peak's coefficient of variation, and the internal standard.A sufficient number of nuclei need to be sampled to accurately describe the position of a peak on the FCM histogram, from which DNA content of the nuclei is estimated. When screening plants within a species for ploidy, a low precision requirement, 600 nuclei per peak can be sufficient (Koutecky et al. 2023). Higher precision is required for GS estimation with at least 1000 nuclei measured within the G1 peaks of both sample and internal standard (Sliwinska et al. 2022). The requirement for establishing a new reference standard is higher still. Koutecky et al. (2023) demonstrated that the quality of the estimated mean improved to within 0.5% of the true value for all samples when 1200 nuclei were sampled and to within 0.2% at 4200 events. This is the level of precision that should be targeted for internal standards. The maximum allowable coefficient of variation (CV) or spread of the nuclei in the sample peaks also varies by application. Cytotype screening using dried tissue may have CVs of 5% without causing problems for discrimination (Bainard et al. 2011;Suda and Travnicek 2006). In contrast, estimates of GS typically require CVs of 3% or lower (Temsch et al. 2022).The choice of a plant with a known DNA content to act as an internal standard is also critical for the accuracy of the estimate. The standard's DNA content should be as close as possible to the target DNA without causing overlap in the G1 or G2 peaks, nor differ by more than three-fold. Additionally, the flow cytometer should be adjusted so that the lowest peak is not within the lowest 10% of the fluorescence axis. This can result in event loss (Koutecky et al. 2023).Finally, care also needs to be taken with data analysis. Koutecky et al. (2023) suggest that analysis via model-fitting results in greater accuracy compared to manual gating for establishing GS. Soni and Henry (2025) made the surprising statement that they analyzed their data using manual gating to minimize errors. We were interested in how using the open-source model fitting package flowPloidy in R (Smith et al. 2018) would change the results. This led to the determination that the Soni and Henry (2025) approach to re-calibration is flawed and does not meet best practices.Soni and Henry (2025)'s data files were downloaded from the journal's website and analyzed with flowPloidy (v 1.37.2) in R (v 4.5.2) (R Core Team 2025; Smith et al. 2018). For the fifteen data files, "Tube Name" was used to identify the sample and standard and channel "B_695.40.A" was selected as the fluorescence data. Samples were gated (SI Figure 1) and peaks were called using the model with the best fit (SI Figures 1-21). The ratios between the sample and reference G1 peaks were calculated for comparison with Soni and Henry (2025) (Table 1).Re-calibration of the DNA content of internal reference standards used in FCM is a highly important task that should be completed with the utmost care and high standards informed by the best practices established for GS estimation. Only three of the 15 data files underlying Soni and Henry (2025)'s re-calibration have at least 1000 events per peak, CVs of less than 3%, and avoid violating other best practices (Table 1). Further, while they included three technical replicates, they did not replicate sample-standard pairs. These departures from best practices are sufficient to raise serious concerns about the reliability of the proposed recalibration. More fundamentally, however, reanalysis with flowPloidy uncovered that Soni and Henry (2025) erroneously used Oryza's G2 peak as the sample peak instead of Sorghum's G1 peak. This means that the GS estimates presented for Sorghum, Gossypium, Pisum and Nicotiana are all based on this incorrect ratio. Ratios of close to 2 (or 0.5) should evoke caution as they indicate either an overlap of the standard's G2 and sample's G1 (or vice versa) or misidentification of a G1 peak. Either issue would need to be addressed to produce accurate results. Laurie and Bennett (1985) estimated 2C DNA contents for diploid (1.5 pg) and tetraploid (3.4 pg) Sorghum suggesting that Soni...
- Open Access
- 4 September 2025
- Published by Wiley in Pest Management Science
- Vol. 82 (1) , 305-318
Functional synergy and genomic linkage of glyphosate resistance traits in Canada fleabane
BACKGROUND: Glyphosate resistance in Conyza canadensis (Canada fleabane) has been primarily attributed to non‐target‐site resistance (NTSR) mechanisms such as vacuolar sequestration, though these have not been formally elucidated. While a target‐site mutation at EPSPS2 (P106S) was recently identified, it failed to account for many resistant cases. These findings underscore the need to re‐evaluate the genetic basis of glyphosate resistance in this species. RESULTS: Using an F 2 population derived from glyphosate‐resistant and susceptible biotypes, we disentangled the individual and combined effects of target‐site resistance (TSR) and NTSR. Dose–response phenotyping and genotyping revealed that NTSR conferred broad protection across a wide range of glyphosate doses, while TSR provided a more limited, dose‐dependent benefit. When both mechanisms were present, median lethal dose (LD 50 ) values greatly exceeded additive expectations, indicating a synergistic interaction. Quantitative trait locus (QTL) mapping identified a major‐effect locus associated with NTSR on chromosome 4, with candidate genes linked to membrane transport and subcellular compartmentalization processes. Segregation distortion and recombination frequency estimates suggest moderate genetic linkage between TSR and NTSR loci, facilitating co‐inheritance of resistance alleles. CONCLUSION: This study provides the first explicit quantitative analysis of gene × gene interactions underlying herbicide resistance in C. canadensis . By disentangling TSR and NTSR, we show that single copies of the TSR and NTSR alleles confer approximately nine‐fold and seven‐fold glyphosate resistance, respectively. When combined, these mechanisms exhibit synergism, resulting in resistance levels that exceed additive LD 50 expectations by more than two‐fold. Both TSR and NTSR loci have been mapped to chromosome 4, and moderate genomic linkage (~27% recombination) between them will likely contribute to the persistence and spread of high‐level resistance, even under low selection pressure. © 2025 His Majesty the King in Right of Canada. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. Reproduced with the permission of the Minister of Agriculture and Agri‐Food Canada.
- 4 September 2025
- Published by Wiley in Pest Management Science
- Vol. 82 (1) , 305-318
Open AccessFunctional synergy and genomic linkage of glyphosate resistance traits in Canada fleabane
BACKGROUND: Glyphosate resistance in Conyza canadensis (Canada fleabane) has been primarily attributed to non‐target‐site resistance (NTSR) mechanisms such as vacuolar sequestration, though these have not been formally elucidated. While a target‐site mutation at EPSPS2 (P106S) was recently identified, it failed to account for many resistant cases. These findings underscore the need to re‐evaluate the genetic basis of glyphosate resistance in this species. RESULTS: Using an F 2 population derived from glyphosate‐resistant and susceptible biotypes, we disentangled the individual and combined effects of target‐site resistance (TSR) and NTSR. Dose–response phenotyping and genotyping revealed that NTSR conferred broad protection across a wide range of glyphosate doses, while TSR provided a more limited, dose‐dependent benefit. When both mechanisms were present, median lethal dose (LD 50 ) values greatly exceeded additive expectations, indicating a synergistic interaction. Quantitative trait locus (QTL) mapping identified a major‐effect locus associated with NTSR on chromosome 4, with candidate genes linked to membrane transport and subcellular compartmentalization processes. Segregation distortion and recombination frequency estimates suggest moderate genetic linkage between TSR and NTSR loci, facilitating co‐inheritance of resistance alleles. CONCLUSION: This study provides the first explicit quantitative analysis of gene × gene interactions underlying herbicide resistance in C. canadensis . By disentangling TSR and NTSR, we show that single copies of the TSR and NTSR alleles confer approximately nine‐fold and seven‐fold glyphosate resistance, respectively. When combined, these mechanisms exhibit synergism, resulting in resistance levels that exceed additive LD 50 expectations by more than two‐fold. Both TSR and NTSR loci have been mapped to chromosome 4, and moderate genomic linkage (~27% recombination) between them will likely contribute to the persistence and spread of high‐level resistance, even under low selection pressure. © 2025 His Majesty the King in Right of Canada. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry. Reproduced with the permission of the Minister of Agriculture and Agri‐Food Canada.
- Open Access
- 1 January 2025
- Published by Canadian Science Publishing in Canadian Journal of Plant Science
- Vol. 105, 1-5
Open pollinated green pigweed ( Amaranthus powellii ) × waterhemp ( A. tuberculatus ) hybrids produced in a greenhouse
Green pigweed or Powell amaranth ( Amaranthus powellii), was crossed with waterhemp ( Amaranthus tuberculatus) by allowing open pollination in a greenhouse. Seeds were collected on green pigweed, grown and tested for the presence of waterhemp specific genetic markers. A total of 18.4% of the progeny were identified as hybrid and grown to maturity. All hybrids were dioecious like waterhemp and had very low fertility, since female flowers aborted and male flowers never opened. The pollen inside the unopened flowers had lower viability (44%) than that of the parents (76%).
- 1 January 2025
- Published by Canadian Science Publishing in Canadian Journal of Plant Science
- Vol. 105, 1-5
Open AccessOpen pollinated green pigweed ( Amaranthus powellii ) × waterhemp ( A. tuberculatus ) hybrids produced in a greenhouse
Green pigweed or Powell amaranth ( Amaranthus powellii), was crossed with waterhemp ( Amaranthus tuberculatus) by allowing open pollination in a greenhouse. Seeds were collected on green pigweed, grown and tested for the presence of waterhemp specific genetic markers. A total of 18.4% of the progeny were identified as hybrid and grown to maturity. All hybrids were dioecious like waterhemp and had very low fertility, since female flowers aborted and male flowers never opened. The pollen inside the unopened flowers had lower viability (44%) than that of the parents (76%).
- Open Access
- 1 January 2025
- Published by Wiley in Weed Research
- Vol. 65 (1)
Competitive fitness of bird rape mustard (Brassica rapa L.) that integrated transgenes conferring glyphosate resistance in commercial fields
Ten years after the introduction of genetically engineered canola (Brassica napus L.), bird rape mustard (Brassica rapa L.) with transgenes conferring glyphosate resistance was reported where the crop and the weed were sympatric. Another decade later, populations of these weeds were reported on farms located beyond this initial region of sympatry. To determine if populations with introgressed transgenes have the potential to persist in field borders where wild types and crop plants can be found, the competitive fitness of two of these populations was compared to that of two naturalised wild Brassica rapa populations, a B. rapa cultivar and a B. napus cultivar, in a greenhouse study. Single plants of each of these six Brassica lines (referred to as types) were grown surrounded by four to eight contour plants (1:4 or 1:8) of each type, for a total of 36 combinations, at two densities. The experiment included four replicates and was repeated twice with one trial ending at flowering and the second continuing to plant maturity. Analyses evaluated the effect of Brassica type and density on phenology, total aboveground biomass and seed production as well as gains or losses in these latter fitness components by centre plants compared to contour plants. Results demonstrate that the bird rape mustard populations with transgenes from haphazard crosses with glyphosate‐tolerant B. napus crop plants were not always as fit as other, wild B. rapa populations. Their early development was slower than wild types and their biomass was generally reduced when grown surrounded by dissimilar plant types. Nevertheless, observed differences were unlikely to limit the persistence of these biotypes in the absence of glyphosate application.
- 1 January 2025
- Published by Wiley in Weed Research
- Vol. 65 (1)
Open AccessCompetitive fitness of bird rape mustard (Brassica rapa L.) that integrated transgenes conferring glyphosate resistance in commercial fields
Ten years after the introduction of genetically engineered canola (Brassica napus L.), bird rape mustard (Brassica rapa L.) with transgenes conferring glyphosate resistance was reported where the crop and the weed were sympatric. Another decade later, populations of these weeds were reported on farms located beyond this initial region of sympatry. To determine if populations with introgressed transgenes have the potential to persist in field borders where wild types and crop plants can be found, the competitive fitness of two of these populations was compared to that of two naturalised wild Brassica rapa populations, a B. rapa cultivar and a B. napus cultivar, in a greenhouse study. Single plants of each of these six Brassica lines (referred to as types) were grown surrounded by four to eight contour plants (1:4 or 1:8) of each type, for a total of 36 combinations, at two densities. The experiment included four replicates and was repeated twice with one trial ending at flowering and the second continuing to plant maturity. Analyses evaluated the effect of Brassica type and density on phenology, total aboveground biomass and seed production as well as gains or losses in these latter fitness components by centre plants compared to contour plants. Results demonstrate that the bird rape mustard populations with transgenes from haphazard crosses with glyphosate‐tolerant B. napus crop plants were not always as fit as other, wild B. rapa populations. Their early development was slower than wild types and their biomass was generally reduced when grown surrounded by dissimilar plant types. Nevertheless, observed differences were unlikely to limit the persistence of these biotypes in the absence of glyphosate application.
- Open Access
- 1 January 2025
- Published by Canadian Science Publishing in Canadian Journal of Plant Science
- Vol. 105, 1-9
Changing environment, changing genes: insights from weed genetics and genomics
This generation of scientists is living through the genomics revolution. While this revolution has been slower to reach weed science than some other disciplines, genome sequences ecode essential information for meeting the challenges that the agricultural system needs to withstand. Sequencing weed genomes can provide insights into past and current evolutionary processes, allow us to determine the genetic basis of key traits, and to understand the current connections among populations informing effective management strategies. Weed genomics, therefore, can be the factor that allows us to address the chronic challenge represented by the evolution of herbicide resistance because it provides the basis for understanding how weed genomes have changed with their changing environment.
- 1 January 2025
- Published by Canadian Science Publishing in Canadian Journal of Plant Science
- Vol. 105, 1-9
Open AccessChanging environment, changing genes: insights from weed genetics and genomics
This generation of scientists is living through the genomics revolution. While this revolution has been slower to reach weed science than some other disciplines, genome sequences ecode essential information for meeting the challenges that the agricultural system needs to withstand. Sequencing weed genomes can provide insights into past and current evolutionary processes, allow us to determine the genetic basis of key traits, and to understand the current connections among populations informing effective management strategies. Weed genomics, therefore, can be the factor that allows us to address the chronic challenge represented by the evolution of herbicide resistance because it provides the basis for understanding how weed genomes have changed with their changing environment.
- Open Access
- 30 October 2024
- Published by Cambridge University Press (CUP) in Weed Science
- Vol. 73, 1-51
Structured, inbred, and plastic: the genome and population genetics of the weed false cleavers (Galium spurium)
False cleavers (Galium spurium L.) is an aggressive weed from the Rubiaceae. Here we assemble a chromosome-scale draft of its genome, laying the foundations for determining the genetic basis of auxinic herbicide resistance and for systematic research into its polyphyletic genus. We use the genome to examine the population genetics of material from the Canadian Prairies and, in concert with a common greenhouse experiment, to examine whether the phenotypic variation observed in the field results primarily from genetic or environmental factors. The genome assembly covers approximately 85% of G. spurium’s expected 360-Mbp genome size, with 94% of BUSCO (Benchmarking Universal Single-Copy Orthologs) genes complete and most single copy (89%). Approximately 37% of the genome is repetitive elements and 35,540 genes were annotated using RNA-seq data, including 100 homologues for genes involved in, or potentially involved in, herbicide resistance. The genome shows strong synteny with other members of the Rubiaceae, including smooth bedstraw (Cruciata laevipes Opiz) and robusta coffee [Coffea canephora (Pierre ex Froehner]. Double-digested RAD-seq data for the 19 populations from the Canadian Prairies indicated that G. spurium has high levels of population structure (FST = 0.54) and inbreeding (FIS = 0.86) with low levels of hetrozygosity (HO = 0.02) and nucleotide diversity (π = 0.0003). Variation in flowering time and seed weight largely overlapped among populations grown in the greenhouse. A redundancy analysis investigating genotype–phenotype associations showed few associations between single-nucleotide polymorphism (SNP) variation and these characteristics. In contrast, the majority of SNPs under selection were associated with mericarp hook density. This suggests that for most traits, environmental variation rather than genetic variation likely underlies phenotypic differences observed in the field. Several genes of interest, including several homologues involved in the assembly of the Skp1-Cullin-F-Box IR1/AFB E3 ubiquitin ligase complex (e.g., CAND1, ECR1), are located in areas of the genome with evidence of selection and are targets for further investigation.
- 30 October 2024
- Published by Cambridge University Press (CUP) in Weed Science
- Vol. 73, 1-51
Open AccessStructured, inbred, and plastic: the genome and population genetics of the weed false cleavers (Galium spurium)
False cleavers (Galium spurium L.) is an aggressive weed from the Rubiaceae. Here we assemble a chromosome-scale draft of its genome, laying the foundations for determining the genetic basis of auxinic herbicide resistance and for systematic research into its polyphyletic genus. We use the genome to examine the population genetics of material from the Canadian Prairies and, in concert with a common greenhouse experiment, to examine whether the phenotypic variation observed in the field results primarily from genetic or environmental factors. The genome assembly covers approximately 85% of G. spurium’s expected 360-Mbp genome size, with 94% of BUSCO (Benchmarking Universal Single-Copy Orthologs) genes complete and most single copy (89%). Approximately 37% of the genome is repetitive elements and 35,540 genes were annotated using RNA-seq data, including 100 homologues for genes involved in, or potentially involved in, herbicide resistance. The genome shows strong synteny with other members of the Rubiaceae, including smooth bedstraw (Cruciata laevipes Opiz) and robusta coffee [Coffea canephora (Pierre ex Froehner]. Double-digested RAD-seq data for the 19 populations from the Canadian Prairies indicated that G. spurium has high levels of population structure (FST = 0.54) and inbreeding (FIS = 0.86) with low levels of hetrozygosity (HO = 0.02) and nucleotide diversity (π = 0.0003). Variation in flowering time and seed weight largely overlapped among populations grown in the greenhouse. A redundancy analysis investigating genotype–phenotype associations showed few associations between single-nucleotide polymorphism (SNP) variation and these characteristics. In contrast, the majority of SNPs under selection were associated with mericarp hook density. This suggests that for most traits, environmental variation rather than genetic variation likely underlies phenotypic differences observed in the field. Several genes of interest, including several homologues involved in the assembly of the Skp1-Cullin-F-Box IR1/AFB E3 ubiquitin ligase complex (e.g., CAND1, ECR1), are located in areas of the genome with evidence of selection and are targets for further investigation.
- Open Access
- 1 August 2024
- Published by Canadian Science Publishing in Canadian Journal of Plant Science
- Vol. 104 (4) , 277-297
Palmer amaranth (Amaranthus palmeri S. Wats.) and waterhemp (Amaranthus tuberculatus (Moq.) J.D. Sauer) biovigilance in Canadian Agro-ecosystems
The evolution and spread of herbicide-resistant weeds threatens long-term sustainability of Canadian agro-ecosystems. Herbicide-resistant weeds increase management inputs and costs, increase off-target and environmental exposure to pesticides, reduce yield quality and quantity, and impede harvest efficiency. Amaranthus species including Palmer amaranth ( Amaranthus palmeri S. Wats.) and waterhemp ( Amaranthus tuberculatus (Moq.) J.D. Sauer) are particularly concerning due to both their propensity towards herbicide resistance evolution, their history of invasion, and their spread in agro-ecosystems. A biovigilance approach is taken to build awareness of these pigweeds' initial invasion and spread in the USA. Characteristics of their identification, potential hybridization, and known herbicide resistance evolution are reviewed. Fourteen species of Amaranthus are found in Canada, nine of which (including waterhemp) possess herbicide-resistant biotypes. A total of 45 hybrids between various Canadian Amaranthus species with each other or Palmer amaranth have been noted. Hybrids have been experimentally produced or observed from herbarium specimens, with three cases of herbicide resistance transfer notably with Palmer amaranth or waterhemp. Mitigation strategies will depend on successful species identification and herbicide resistance status determination. Common pathways for Palmer amaranth introductions in the northern USA include both animal feed systems with grain screenings and crop production systems including seed and equipment contamination. Regional awareness campaigns will be critical to support Canadian farmers in identifying and quickly mitigating invasions of Palmer amaranth and waterhemp to prevent establishment and spread of infestations into new areas.
- 1 August 2024
- Published by Canadian Science Publishing in Canadian Journal of Plant Science
- Vol. 104 (4) , 277-297
Open AccessPalmer amaranth (Amaranthus palmeri S. Wats.) and waterhemp (Amaranthus tuberculatus (Moq.) J.D. Sauer) biovigilance in Canadian Agro-ecosystems
The evolution and spread of herbicide-resistant weeds threatens long-term sustainability of Canadian agro-ecosystems. Herbicide-resistant weeds increase management inputs and costs, increase off-target and environmental exposure to pesticides, reduce yield quality and quantity, and impede harvest efficiency. Amaranthus species including Palmer amaranth ( Amaranthus palmeri S. Wats.) and waterhemp ( Amaranthus tuberculatus (Moq.) J.D. Sauer) are particularly concerning due to both their propensity towards herbicide resistance evolution, their history of invasion, and their spread in agro-ecosystems. A biovigilance approach is taken to build awareness of these pigweeds' initial invasion and spread in the USA. Characteristics of their identification, potential hybridization, and known herbicide resistance evolution are reviewed. Fourteen species of Amaranthus are found in Canada, nine of which (including waterhemp) possess herbicide-resistant biotypes. A total of 45 hybrids between various Canadian Amaranthus species with each other or Palmer amaranth have been noted. Hybrids have been experimentally produced or observed from herbarium specimens, with three cases of herbicide resistance transfer notably with Palmer amaranth or waterhemp. Mitigation strategies will depend on successful species identification and herbicide resistance status determination. Common pathways for Palmer amaranth introductions in the northern USA include both animal feed systems with grain screenings and crop production systems including seed and equipment contamination. Regional awareness campaigns will be critical to support Canadian farmers in identifying and quickly mitigating invasions of Palmer amaranth and waterhemp to prevent establishment and spread of infestations into new areas.
- Open Access
- 1 April 2024
- Published by Canadian Science Publishing in Canadian Journal of Plant Science
- Vol. 104 (2) , 124-128
Revisiting the origins of glyphosate-resistant giant ragweed (Ambrosia trifida L.) in Canada
Glyphosate-resistant giant ragweed ( Ambrosia trifida L.) was first identified in Canada in 2008. Although early studies attributed resistance in this species solely to non-target site mechanisms, the presence of a proline (P) to serine (S) mutation at position 106 of EPSPS2 in common and giant ragweed has recently been reported. The objective of this research was (i) to determine whether a P106S mutation is present in historical samples of giant ragweed seed collected from the site of the first report of glyphosate resistance, and (ii) to determine the frequency and distribution of P106S in resistant and susceptible biotypes collected as part of historical surveys throughout southwestern Ontario.
- 1 April 2024
- Published by Canadian Science Publishing in Canadian Journal of Plant Science
- Vol. 104 (2) , 124-128
Open AccessRevisiting the origins of glyphosate-resistant giant ragweed (Ambrosia trifida L.) in Canada
Glyphosate-resistant giant ragweed ( Ambrosia trifida L.) was first identified in Canada in 2008. Although early studies attributed resistance in this species solely to non-target site mechanisms, the presence of a proline (P) to serine (S) mutation at position 106 of EPSPS2 in common and giant ragweed has recently been reported. The objective of this research was (i) to determine whether a P106S mutation is present in historical samples of giant ragweed seed collected from the site of the first report of glyphosate resistance, and (ii) to determine the frequency and distribution of P106S in resistant and susceptible biotypes collected as part of historical surveys throughout southwestern Ontario.
- Open Access
- 17 August 2023
- Published by Wiley in Ecology and Evolution
- Vol. 13 (8) , e10231
Global biodiversity data suggest allopolyploid plants do not occupy larger ranges or harsher conditions compared with their progenitors
Understanding the factors determining species' geographical and environmental range is a central question in evolution and ecology, and key for developing conservation and management practices. Shortly after the discovery of polyploidy, just over 100 years ago, it was suggested that polyploids generally have greater range sizes and occur in more extreme conditions than their diploid congeners. This suggestion is now widely accepted in the literature and is attributed to polyploids having an increased capacity for genetic diversity that increases their potential for adaptation and invasiveness. However, the data supporting this idea are mixed. Here, we compare the niche of allopolyploid plants to their progenitor species to determine whether allopolyploidization is associated with increased geographic range or extreme environmental tolerance. Our analysis includes 123 allopolyploid species that exist as only one known ploidy level, with at least one known progenitor species, and at least 50 records in the Global Biodiversity Information Facility (GBIF) database. We used GBIF occurrence data and range modeling tools to quantify the geographic and environmental distribution of these allopolyploids relative to their progenitors. We find no indication that allopolyploid plants occupy more extreme conditions or larger geographic ranges than their progenitors. Data evaluated here generally indicate no significant difference in range between allopolyploids and progenitors, and where significant differences do occur, the progenitors are more likely to exist in extreme conditions. We concluded that the evidence from these data indicate allopolyploidization does not result in larger or more extreme ranges. Thus, allopolyploidization does not have a consistent effect on species distribution, and we conclude it is more likely the content of an allopolyploid's genome rather than polyploidy per se that determines the potential for invasiveness.
- 17 August 2023
- Published by Wiley in Ecology and Evolution
- Vol. 13 (8) , e10231
Open AccessGlobal biodiversity data suggest allopolyploid plants do not occupy larger ranges or harsher conditions compared with their progenitors
Understanding the factors determining species' geographical and environmental range is a central question in evolution and ecology, and key for developing conservation and management practices. Shortly after the discovery of polyploidy, just over 100 years ago, it was suggested that polyploids generally have greater range sizes and occur in more extreme conditions than their diploid congeners. This suggestion is now widely accepted in the literature and is attributed to polyploids having an increased capacity for genetic diversity that increases their potential for adaptation and invasiveness. However, the data supporting this idea are mixed. Here, we compare the niche of allopolyploid plants to their progenitor species to determine whether allopolyploidization is associated with increased geographic range or extreme environmental tolerance. Our analysis includes 123 allopolyploid species that exist as only one known ploidy level, with at least one known progenitor species, and at least 50 records in the Global Biodiversity Information Facility (GBIF) database. We used GBIF occurrence data and range modeling tools to quantify the geographic and environmental distribution of these allopolyploids relative to their progenitors. We find no indication that allopolyploid plants occupy more extreme conditions or larger geographic ranges than their progenitors. Data evaluated here generally indicate no significant difference in range between allopolyploids and progenitors, and where significant differences do occur, the progenitors are more likely to exist in extreme conditions. We concluded that the evidence from these data indicate allopolyploidization does not result in larger or more extreme ranges. Thus, allopolyploidization does not have a consistent effect on species distribution, and we conclude it is more likely the content of an allopolyploid's genome rather than polyploidy per se that determines the potential for invasiveness.
- Open Access
- 17 August 2022
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 12 (12)
Insights from the genomes of 4 diploid Camelina spp.
Plant evolution has been a complex process involving hybridization and polyploidization making understanding the origin and evolution of a plant’s genome challenging even once a published genome is available. The oilseed crop, Camelina sativa (Brassicaceae), has a fully sequenced allohexaploid genome with 3 unknown ancestors. To better understand which extant species best represent the ancestral genomes that contributed to C. sativa’s formation, we sequenced and assembled chromosome level draft genomes for 4 diploid members of Camelina: C. neglecta C. hispida var. hispida, C. hispida var. grandiflora, and C. laxa using long and short read data scaffolded with proximity data. We then conducted phylogenetic analyses on regions of synteny and on genes described for Arabidopsis thaliana, from across each nuclear genome and the chloroplasts to examine evolutionary relationships within Camelina and Camelineae. We conclude that C. neglecta is closely related to C. sativa’s sub-genome 1 and that C. hispida var. hispida and C. hispida var. grandiflora are most closely related to C. sativa’s sub-genome 3. Further, the abundance and density of transposable elements, specifically Helitrons, suggest that the progenitor genome that contributed C. sativa’s sub-genome 3 maybe more similar to the genome of C. hispida var. hispida than that of C. hispida var. grandiflora. These diploid genomes show few structural differences when compared to C. sativa’s genome indicating little change to chromosome structure following allopolyploidization. This work also indicates that C. neglecta and C. hispida are important resources for understanding the genetics of C. sativa and potential resources for crop improvement.
- 17 August 2022
- Published by Oxford University Press (OUP) in G3: Genes, Genomes, Genetics
- Vol. 12 (12)
Open AccessInsights from the genomes of 4 diploid Camelina spp.
Plant evolution has been a complex process involving hybridization and polyploidization making understanding the origin and evolution of a plant’s genome challenging even once a published genome is available. The oilseed crop, Camelina sativa (Brassicaceae), has a fully sequenced allohexaploid genome with 3 unknown ancestors. To better understand which extant species best represent the ancestral genomes that contributed to C. sativa’s formation, we sequenced and assembled chromosome level draft genomes for 4 diploid members of Camelina: C. neglecta C. hispida var. hispida, C. hispida var. grandiflora, and C. laxa using long and short read data scaffolded with proximity data. We then conducted phylogenetic analyses on regions of synteny and on genes described for Arabidopsis thaliana, from across each nuclear genome and the chloroplasts to examine evolutionary relationships within Camelina and Camelineae. We conclude that C. neglecta is closely related to C. sativa’s sub-genome 1 and that C. hispida var. hispida and C. hispida var. grandiflora are most closely related to C. sativa’s sub-genome 3. Further, the abundance and density of transposable elements, specifically Helitrons, suggest that the progenitor genome that contributed C. sativa’s sub-genome 3 maybe more similar to the genome of C. hispida var. hispida than that of C. hispida var. grandiflora. These diploid genomes show few structural differences when compared to C. sativa’s genome indicating little change to chromosome structure following allopolyploidization. This work also indicates that C. neglecta and C. hispida are important resources for understanding the genetics of C. sativa and potential resources for crop improvement.