Kyong-Uk Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Kyong-Uk Yang has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Myung-Soo Choi4 shared publications
Dae Hyon Kim
Department of Marine and Civil Engineering, Chonnam National University, Gwangju, South Korea
2 shared publicationsDuck Jong Jang
Chonnam National University
2 shared publicationsJung Gyu Hur
Chonnam National University
2 shared publications- Taeho Kim
Department of Marine Production Management, Chonnam National University, Yeosu 59626, Republic of Korea
2 shared publications David W. Fredriksson
1 shared publication
Latest Publications
- 30 April 2025
- Published by The Korea Society for Power System Engineering in Journal of Power System Engineering
- Vol. 29 (2) , 39-45
Buckling Analysis of Elastically Supported Straight Beams Using Transfer of Influence Coefficient
저자들은 영향계수의 전달을 이용하여 구조물의 진동해석을 효과적으로 수행할 수 있는 전달영향계수법을 구조물의 좌굴해석 분야에 도입하여 새로운 좌굴해석 방법을 개발하였다. 이 논문에서 탄성지지된 직선 보를 대상으로 영향계수의 전달을 이용하여 좌굴하중을 계산하는 알고리즘이 정식화되었다. 이 알고리즘을 기반으로 매트랩을 이용하여 전산 프로그램을 만들었다. 다양한 방법으로 4가지 직선 보의 좌굴해석을 수행한 후, 전달영향계수법의 결과를 각종 문헌 및 유한요소법과 전달행렬법을 기반으로 한 전산 프로그램의 결과와 비교하였다. 계산 결과의 수치 비교를 통해 이 연구에서 제시한 방법의 신뢰성 및 유효성을 확인하였다.
- 30 April 2025
- Published by The Korea Society for Power System Engineering in Journal of Power System Engineering
- Vol. 29 (2) , 39-45
Buckling Analysis of Elastically Supported Straight Beams Using Transfer of Influence Coefficient
저자들은 영향계수의 전달을 이용하여 구조물의 진동해석을 효과적으로 수행할 수 있는 전달영향계수법을 구조물의 좌굴해석 분야에 도입하여 새로운 좌굴해석 방법을 개발하였다. 이 논문에서 탄성지지된 직선 보를 대상으로 영향계수의 전달을 이용하여 좌굴하중을 계산하는 알고리즘이 정식화되었다. 이 알고리즘을 기반으로 매트랩을 이용하여 전산 프로그램을 만들었다. 다양한 방법으로 4가지 직선 보의 좌굴해석을 수행한 후, 전달영향계수법의 결과를 각종 문헌 및 유한요소법과 전달행렬법을 기반으로 한 전산 프로그램의 결과와 비교하였다. 계산 결과의 수치 비교를 통해 이 연구에서 제시한 방법의 신뢰성 및 유효성을 확인하였다.
- 28 February 2025
- Published by The Korea Society for Power System Engineering in Journal of Power System Engineering
- Vol. 29 (1) , 46-55
Frequency Response Analysis of Oil Hydraulic Pipeline System Using Transfer of Fluid Admittance
유체 어드미턴스의 전달을 이용하여 유압관로, 어큐뮬레이터, 교축요소, 저장용량요소 등으로 구성된 유압관로계의 주파수 응답을 구하는 새로운 방법을 개발하였다. 이 방법은 출구의 경계조건으로부터 마지막 절점의 유체 어드미턴스를 먼저 구한 후, 출구에서 입구 방향으로 각 절점의 유체 어드미턴스를 차례로 계산한다. 그리고 유압관로의 입구에서 유체 어드미턴스와 경계조건을 이용하여 압력을 구한 후, 압력전달계수를 이용해 유압관로계의 입구에서 출구 방향으로 각 절점의 압력을 차례로 계산한다. 절점의 유량은 절점의 압력과 유체 어드미턴스의 곱으로부터 구할 수 있다. 개발된 방법을 토대로 전산 프로그램을 만들고 3가지 계산모델을 선정하여 수치 계산을 행한 후, 동일 모델에 대한 선행 연구자의 실험, 해석 그리고 전산 프로그램 결과와의 비교를 통해 개발된 방법의 신뢰성을 확인하였다.
- 28 February 2025
- Published by The Korea Society for Power System Engineering in Journal of Power System Engineering
- Vol. 29 (1) , 46-55
Frequency Response Analysis of Oil Hydraulic Pipeline System Using Transfer of Fluid Admittance
유체 어드미턴스의 전달을 이용하여 유압관로, 어큐뮬레이터, 교축요소, 저장용량요소 등으로 구성된 유압관로계의 주파수 응답을 구하는 새로운 방법을 개발하였다. 이 방법은 출구의 경계조건으로부터 마지막 절점의 유체 어드미턴스를 먼저 구한 후, 출구에서 입구 방향으로 각 절점의 유체 어드미턴스를 차례로 계산한다. 그리고 유압관로의 입구에서 유체 어드미턴스와 경계조건을 이용하여 압력을 구한 후, 압력전달계수를 이용해 유압관로계의 입구에서 출구 방향으로 각 절점의 압력을 차례로 계산한다. 절점의 유량은 절점의 압력과 유체 어드미턴스의 곱으로부터 구할 수 있다. 개발된 방법을 토대로 전산 프로그램을 만들고 3가지 계산모델을 선정하여 수치 계산을 행한 후, 동일 모델에 대한 선행 연구자의 실험, 해석 그리고 전산 프로그램 결과와의 비교를 통해 개발된 방법의 신뢰성을 확인하였다.
- 31 December 2024
- Published by The Korea Society for Power System Engineering in Journal of Power System Engineering
- Vol. 28 (6) , 88-96
A Study on Hauling Force for Estimating Safety and Safety Control Standards of Fishing Systems
본 논문에서는 통발 양승기 어로시스템의 구조와 성능을 심도 있게 분석하고, 안전성과 안전제어 기준을 확립하기 위해 유압 시스템 최적화를 목표로 한다. 양승기는 롤러와 드럼으로 구성된 기계 장치이며, 이를 구동하는 유압장치로 작동한다. 논문에서는 시스템 설계 시 외부 및 내부 변수에 대응할 수 있는 정량적 수학적 모델을 수립하였고, 본드선도를 사용해 장치의 수치 모델식을 완성하였다. 시뮬레이션을 통해 외부 부하력 변화에 맞는 권양력 제공을 위한 장치 사양을 제안함으로써, 유압 시스템 설계, 성능 개선, 안전제어 기준 추정을 위한 중요한 기초 자료를 제공하고자 한다.
- 31 December 2024
- Published by The Korea Society for Power System Engineering in Journal of Power System Engineering
- Vol. 28 (6) , 88-96
A Study on Hauling Force for Estimating Safety and Safety Control Standards of Fishing Systems
본 논문에서는 통발 양승기 어로시스템의 구조와 성능을 심도 있게 분석하고, 안전성과 안전제어 기준을 확립하기 위해 유압 시스템 최적화를 목표로 한다. 양승기는 롤러와 드럼으로 구성된 기계 장치이며, 이를 구동하는 유압장치로 작동한다. 논문에서는 시스템 설계 시 외부 및 내부 변수에 대응할 수 있는 정량적 수학적 모델을 수립하였고, 본드선도를 사용해 장치의 수치 모델식을 완성하였다. 시뮬레이션을 통해 외부 부하력 변화에 맞는 권양력 제공을 위한 장치 사양을 제안함으로써, 유압 시스템 설계, 성능 개선, 안전제어 기준 추정을 위한 중요한 기초 자료를 제공하고자 한다.
- 30 April 2023
- Published by The Korea Society for Power System Engineering in Journal of Power System Engineering
- Vol. 27 (2) , 33-41
Static Analysis of Axisymmetric Shells with Various Shapes Using Finite Element-Transfer Stiffness Coefficient Method
축대칭 셸의 정적해석은 공학 분야에서 중요한 주제 중의 하나이다. 저자들은 유한요소법의 모델링 기법과 전달강성계수법의 전달 기법을 조합한 유한요소-전달강성계수법을 이용하여 다양한 형상을 갖는 축대칭 셸의 정적해석을 수행하기 위한 전산 알고리즘을 제안한다. 저자들은 유한요소-전달강성계수법으로 다양한 형상을 갖는 축대칭 셸의 정적해석을 수행하기위한 전산알고리즘을 정식화한 후, 전산 프로그램을 개발하였다. 저자들은 유한요소-전달강성계수법과 유한요소법으로 3가지 계산모델(원형 돔, 물탱크, 압력용기)에 대하여 정적해석을 수행하였다. 양 방법의 계산 결과의 비교를 통해, 유한요소-전달강성계수법은 다양한 형상을 갖는 축대칭 셸의 정적해석에 이용될 수 있는 신뢰성 있는 해석 기법임을 확인하였다.
- 30 April 2023
- Published by The Korea Society for Power System Engineering in Journal of Power System Engineering
- Vol. 27 (2) , 33-41
Static Analysis of Axisymmetric Shells with Various Shapes Using Finite Element-Transfer Stiffness Coefficient Method
축대칭 셸의 정적해석은 공학 분야에서 중요한 주제 중의 하나이다. 저자들은 유한요소법의 모델링 기법과 전달강성계수법의 전달 기법을 조합한 유한요소-전달강성계수법을 이용하여 다양한 형상을 갖는 축대칭 셸의 정적해석을 수행하기 위한 전산 알고리즘을 제안한다. 저자들은 유한요소-전달강성계수법으로 다양한 형상을 갖는 축대칭 셸의 정적해석을 수행하기위한 전산알고리즘을 정식화한 후, 전산 프로그램을 개발하였다. 저자들은 유한요소-전달강성계수법과 유한요소법으로 3가지 계산모델(원형 돔, 물탱크, 압력용기)에 대하여 정적해석을 수행하였다. 양 방법의 계산 결과의 비교를 통해, 유한요소-전달강성계수법은 다양한 형상을 갖는 축대칭 셸의 정적해석에 이용될 수 있는 신뢰성 있는 해석 기법임을 확인하였다.
- 30 June 2019
- Published by The Korea Society for Power System Engineering in Journal of Power System Engineering
- Vol. 23 (3) , 75-81
Transient State Response Analysis of Two Dimensional Curved Beam using Transfer Mass Coefficient Method
- 30 June 2019
- Published by The Korea Society for Power System Engineering in Journal of Power System Engineering
- Vol. 23 (3) , 75-81
Transient State Response Analysis of Two Dimensional Curved Beam using Transfer Mass Coefficient Method
- 27 April 2012
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 69 (4) , 2135-2146
Non-linear modeling and dynamic analysis of hydraulic control valve; effect of a decision factor between experiment and numerical simulation
- 27 April 2012
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 69 (4) , 2135-2146
Non-linear modeling and dynamic analysis of hydraulic control valve; effect of a decision factor between experiment and numerical simulation
- 1 September 2011
- Published by Elsevier in Aquacultural Engineering
- Vol. 45 (2) , 74-86
Automatic submerging and surfacing performances of model submersible fish cage system operated by air control
- 1 September 2011
- Published by Elsevier in Aquacultural Engineering
- Vol. 45 (2) , 74-86
Automatic submerging and surfacing performances of model submersible fish cage system operated by air control
- 1 January 2011
- Published by Springer Nature in Communications in Computer and Information Science
- p. 241-247
Influential Parameters for Dynamic Analysis of a Hydraulic Control Valve
- 1 January 2011
- Published by Springer Nature in Communications in Computer and Information Science
- p. 241-247
Influential Parameters for Dynamic Analysis of a Hydraulic Control Valve
- 31 July 2010
- Published by Journal of Advanced Marine Engineering and Technology in Journal of Advanced Marine Engineering and Technology
- Vol. 34 (5) , 743-749
Submerging Performances of Automatic Submersible Buoy Operated by Air Control
- 31 July 2010
- Published by Journal of Advanced Marine Engineering and Technology in Journal of Advanced Marine Engineering and Technology
- Vol. 34 (5) , 743-749
Submerging Performances of Automatic Submersible Buoy Operated by Air Control
- 1 January 2010
- Published by Marine Technology Society in Marine Technology Society Journal
- Vol. 44 (1) , 57-68
The Submerging Characteristics of a Submersible Fish Cage System Operated by Compressed Air
AbstractA numerical technique is developed to evaluate the submerging characteristics of a full-scale fish cage system operated by compressed air. The results of the numerical model are then compared to both physical model tests and in situ measurements. The cages incorporate the use of ballast tanks for fixed buoyancy and variable buoyancy control. The system is raised by injecting air from a compressor into the variable buoyancy ballast tanks. It is then lowered by releasing the air. The surfacing and submerging characteristics of the fish cage calculated with the numerical technique were similar to measurements obtained with the physical model and in situ tests. It was also found that the quantity of the inflow water is influenced more by the diameter of the suction pipe rather than by the changes in the pressure of compressed air. In addition, the changes in the diameter of the air evacuation pipe are considered to have a greater impact during the ascent rather than descent of the system. Other major factors that affect the vertical movement of the fish cage system operated by compressed air are the seawater flow rates and air flow rate supplied to the variable ballast system. It was concluded that the numerical method could be useful in analyzing various parameters required to optimize the surfacing and submerging characteristics of a fish cage system operated by compressed air.
- 1 January 2010
- Published by Marine Technology Society in Marine Technology Society Journal
- Vol. 44 (1) , 57-68
The Submerging Characteristics of a Submersible Fish Cage System Operated by Compressed Air
AbstractA numerical technique is developed to evaluate the submerging characteristics of a full-scale fish cage system operated by compressed air. The results of the numerical model are then compared to both physical model tests and in situ measurements. The cages incorporate the use of ballast tanks for fixed buoyancy and variable buoyancy control. The system is raised by injecting air from a compressor into the variable buoyancy ballast tanks. It is then lowered by releasing the air. The surfacing and submerging characteristics of the fish cage calculated with the numerical technique were similar to measurements obtained with the physical model and in situ tests. It was also found that the quantity of the inflow water is influenced more by the diameter of the suction pipe rather than by the changes in the pressure of compressed air. In addition, the changes in the diameter of the air evacuation pipe are considered to have a greater impact during the ascent rather than descent of the system. Other major factors that affect the vertical movement of the fish cage system operated by compressed air are the seawater flow rates and air flow rate supplied to the variable ballast system. It was concluded that the numerical method could be useful in analyzing various parameters required to optimize the surfacing and submerging characteristics of a fish cage system operated by compressed air.