Takeshi Sakaguchi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Takeshi Sakaguchi has a total of 54 co-authors. Here are the top co-authors by number of shared publications:
- Kazuhito Yokoi
National Institute of Advanced Industrial Science and Technology
15 shared publications - Fumio Kanehiro
CNRS-AIST Joint Robotics Laboratory, IRL3218, Tsukuba, Japan
12 shared publications - Kenji Kaneko
CNRS–AIST Joint Robotics Laboratory, Tsukuba, Japan
12 shared publications - Mitsuharu Morisawa
CNRS-AIST JRL (Joint Robotics Laboratory) IRL and National Institute of Advanced Industrial Science and Technology (AIST) 1-1-1 Umezono 305-8560 Tsukuba Ibaraki Japan
12 shared publications - Shuuji Kajita
National Institute of Advanced Industrial Science and Technology (AIST)
10 shared publications - Rafael Cisneros
CNRS–AIST Joint Robotics Laboratory, Tsukuba, Japan
9 shared publications
Latest Publications
- Open Access
- 10 October 2022
- Published by Taylor & Francis in Advanced Robotics
- Vol. 36 (22) , 1194-1212
Task board for the World Robot Summit 2020
The World Robot Summit (WRS) Industrial Robotics Category tries to evaluate the performances of assembly robot systems using a task board. The task board comprises an assembly board (task board or board) and a set of parts assembled to the board. Utilizing an appropriate task board expects to facilitate the development of assembly robot systems. This paper examines the components necessary for the design of the task board through the results and analyzes of the task board competition in the WRS 2020 (held in September 2021). The task board will serve as a benchmark in developing an assembly robot system that can assemble the belt drive unit, an assembly model for the WRS 2020 assembly competitions. The success rate of each part of the competition and the correlation with assembly competitions reinforces the validity of the task board design. This paper describes that the WRS 2020 task board had a larger correlation with the belt drive unit used in the assembly competitions than that of the WRS 2018 (0.54 vs. 0.29). The design in the WRS 2020 is more appropriate than that in the WRS 2018 as a benchmark for assembling the belt drive unit. GRAPHICAL ABSTRACT
- 10 October 2022
- Published by Taylor & Francis in Advanced Robotics
- Vol. 36 (22) , 1194-1212
Open AccessTask board for the World Robot Summit 2020
The World Robot Summit (WRS) Industrial Robotics Category tries to evaluate the performances of assembly robot systems using a task board. The task board comprises an assembly board (task board or board) and a set of parts assembled to the board. Utilizing an appropriate task board expects to facilitate the development of assembly robot systems. This paper examines the components necessary for the design of the task board through the results and analyzes of the task board competition in the WRS 2020 (held in September 2021). The task board will serve as a benchmark in developing an assembly robot system that can assemble the belt drive unit, an assembly model for the WRS 2020 assembly competitions. The success rate of each part of the competition and the correlation with assembly competitions reinforces the validity of the task board design. This paper describes that the WRS 2020 task board had a larger correlation with the belt drive unit used in the assembly competitions than that of the WRS 2018 (0.54 vs. 0.29). The design in the WRS 2020 is more appropriate than that in the WRS 2018 as a benchmark for assembling the belt drive unit. GRAPHICAL ABSTRACT
- Open Access
- 10 August 2022
- Published by Taylor & Francis in Advanced Robotics
- Vol. 36 (22) , 1174-1193
World robot summit 2020 assembly challenge – summary of the competition and its outcomes*
The World Robot Summit (WRS) is a robotic ‘challenge and exposition’ organized by the Japanese government to accelerate social implementation, research and development of robots working in realistic daily life, society, and industrial fields. In this paper, we introduce a robot competition of the Industrial Robotics Category of the WRS, called ‘Assembly Challenge’, which is organized by the WRS Industrial Robotics Competition Committee in order to promote the development of the next-generation production systems that can respond to new production demands in agile and lean manners. After the pre-competition held in Tokyo in October 2018, the main competition, the WRS 2020, was originally scheduled to be held in Aichi (partly in Fukushima) in 2020, which was also the Olympic year. However, due to the pandemic of COVID-19, the event was postponed, and the competition was actually held in Aichi in September 2021. In this paper, we introduce the contents and results of the WRS 2020 and analyze the results. We would also like to summarize the 5-year project since 2017 and discuss the outcomes of the WRS. GRAPHICAL ABSTRACT
- 10 August 2022
- Published by Taylor & Francis in Advanced Robotics
- Vol. 36 (22) , 1174-1193
Open AccessWorld robot summit 2020 assembly challenge – summary of the competition and its outcomes*
The World Robot Summit (WRS) is a robotic ‘challenge and exposition’ organized by the Japanese government to accelerate social implementation, research and development of robots working in realistic daily life, society, and industrial fields. In this paper, we introduce a robot competition of the Industrial Robotics Category of the WRS, called ‘Assembly Challenge’, which is organized by the WRS Industrial Robotics Competition Committee in order to promote the development of the next-generation production systems that can respond to new production demands in agile and lean manners. After the pre-competition held in Tokyo in October 2018, the main competition, the WRS 2020, was originally scheduled to be held in Aichi (partly in Fukushima) in 2020, which was also the Olympic year. However, due to the pandemic of COVID-19, the event was postponed, and the competition was actually held in Aichi in September 2021. In this paper, we introduce the contents and results of the WRS 2020 and analyze the results. We would also like to summarize the 5-year project since 2017 and discuss the outcomes of the WRS. GRAPHICAL ABSTRACT
- 14 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. 26 (4) , 20-29
Toward Industrialization of Humanoid Robots: Autonomous Plasterboard Installation to Improve Safety and Efficiency
- 14 October 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics & Automation Magazine
- Vol. 26 (4) , 20-29
Toward Industrialization of Humanoid Robots: Autonomous Plasterboard Installation to Improve Safety and Efficiency
- 30 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 4 (2) , 1431-1438
Humanoid Robot HRP-5P: An Electrically Actuated Humanoid Robot With High-Power and Wide-Range Joints
- 30 January 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Robotics and Automation Letters
- Vol. 4 (2) , 1431-1438
Humanoid Robot HRP-5P: An Electrically Actuated Humanoid Robot With High-Power and Wide-Range Joints
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 713-719
Perception Based Locomotion System for a Humanoid Robot with Adaptive Footstep Compensation under Task Constraints
In order to accurately reach a target position while executing a task which imposes occlusion or constraints of the posture, a humanoid robot requires an adaptive locomotion system, which can comprehensively integrate localization, environmental mapping, global locomotion planning and local error correction. In this paper, we propose a method of constructing a perception based locomotion system for a humanoid robot. The major contribution of this paper is solving a problem of the locomotion error caused by the task constraints, by locally compensating footsteps and assessing the need for global footstep re-planning online based on environmental measurements. The proposed system provides an accurate and dense ground point cloud, called HeightField, using plane estimation and space interpolation, and obstacle point cloud for frequent collision avoidance by accumulating laser scans. This environmental perception enables a humanoid robot to plan footsteps globally even in the situation where the sight of the robot is limited and compensate footsteps while estimating landing state during locomotion online with the localization result. We evaluated the practicality of the proposed system by applying it to our humanoid robot carrying a heavy object in a construction site and confirmed that the proposed system contributed to improved locomotion abilities of a humanoid robot engaging in heavy-duty or dangerous tasks.
- 1 October 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 713-719
Perception Based Locomotion System for a Humanoid Robot with Adaptive Footstep Compensation under Task Constraints
In order to accurately reach a target position while executing a task which imposes occlusion or constraints of the posture, a humanoid robot requires an adaptive locomotion system, which can comprehensively integrate localization, environmental mapping, global locomotion planning and local error correction. In this paper, we propose a method of constructing a perception based locomotion system for a humanoid robot. The major contribution of this paper is solving a problem of the locomotion error caused by the task constraints, by locally compensating footsteps and assessing the need for global footstep re-planning online based on environmental measurements. The proposed system provides an accurate and dense ground point cloud, called HeightField, using plane estimation and space interpolation, and obstacle point cloud for frequent collision avoidance by accumulating laser scans. This environmental perception enables a humanoid robot to plan footsteps globally even in the situation where the sight of the robot is limited and compensate footsteps while estimating landing state during locomotion online with the localization result. We evaluated the practicality of the proposed system by applying it to our humanoid robot carrying a heavy object in a construction site and confirmed that the proposed system contributed to improved locomotion abilities of a humanoid robot engaging in heavy-duty or dangerous tasks.
- 1 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 599-605
Biped walking pattern generation based on spatially quantized dynamics
We present a biped walking pattern generation based on a new way of system discretization named spatially quantized dynamics (SQD). In SQD, a continuous system is discretized by a constant unit length along the walk direction, and the dynamics is represented by a recurrence formula for a unit length motion, taking variable period for each cycle. Using SQD modelling, we can generate a biped gait by taking three steps; 1) Design a walking pattern only considering kinematics in the sagittal plane, 2) Calculate the ZMP and velocity by optimization of the spatially quantized dynamics, 3) Add hip lateral motion for 3D dynamic balance. It is shown that we can easily generate a biped gait with stretched knees and a gait for large step climbing. The validity of the generated patterns are confirmed by simulations.
- 1 November 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 599-605
Biped walking pattern generation based on spatially quantized dynamics
We present a biped walking pattern generation based on a new way of system discretization named spatially quantized dynamics (SQD). In SQD, a continuous system is discretized by a constant unit length along the walk direction, and the dynamics is represented by a recurrence formula for a unit length motion, taking variable period for each cycle. Using SQD modelling, we can generate a biped gait by taking three steps; 1) Design a walking pattern only considering kinematics in the sagittal plane, 2) Calculate the ZMP and velocity by optimization of the spatially quantized dynamics, 3) Add hip lateral motion for 3D dynamic balance. It is shown that we can easily generate a biped gait with stretched knees and a gait for large step climbing. The validity of the generated patterns are confirmed by simulations.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 45-49
Quick squatting motion generation of a humanoid robot for falling damage reduction
This paper presents quick squatting motion generation of a humanoid robot to reduce its falling damage. The forward squat motion could be realized by simple motion planning of the center of mass. To enhance the stability at the landing, we designed a controller based on Nagasaka's trunk position compliance control. To design a more complicated motion which perform squat and step back at the same time, we design reference Zero-Moment Point and the center of mass trajectories for the requirement. A dynamically consistent robot motion can be obtained by using differential dynamic programming (DDP) technique. Experimental results by using a humanoid robot HRP-2Kai are shown.
- 1 October 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 45-49
Quick squatting motion generation of a humanoid robot for falling damage reduction
This paper presents quick squatting motion generation of a humanoid robot to reduce its falling damage. The forward squat motion could be realized by simple motion planning of the center of mass. To enhance the stability at the landing, we designed a controller based on Nagasaka's trunk position compliance control. To design a more complicated motion which perform squat and step back at the same time, we design reference Zero-Moment Point and the center of mass trajectories for the requirement. A dynamically consistent robot motion can be obtained by using differential dynamic programming (DDP) technique. Experimental results by using a humanoid robot HRP-2Kai are shown.
- 1 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Developing semi-autonomous humanoid robots that perform various composite tasks via a task sequencer and dynamics simulator
This paper proposes a system to enable a humanoid robot to perform various tasks semi-autonomously according to higher-layer procedures called task sequences. A task sequence is a sequentially structured procedure that describes how to perform a particular task based on sensing data, motion planners, and a robot controller. These task sequences are processed by the task sequencer to move the robot. The goal of our system is to support comprehensive tasks, such as disaster response, with a number of task sequences defined for various subtasks. To efficiently develop required task sequences, the task sequencer is designed such that task sequences can be executed interactively; further, the task sequencer is integrated with a dynamics simulator that can be used to test the sequences without actually moving the robot. We verified our system by using it to make our HRP-2Kai robot perform the tasks defined in the DARPA Robotics Challenge, a competition involving disaster response robots.
- 1 March 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Developing semi-autonomous humanoid robots that perform various composite tasks via a task sequencer and dynamics simulator
This paper proposes a system to enable a humanoid robot to perform various tasks semi-autonomously according to higher-layer procedures called task sequences. A task sequence is a sequentially structured procedure that describes how to perform a particular task based on sensing data, motion planners, and a robot controller. These task sequences are processed by the task sequencer to move the robot. The goal of our system is to support comprehensive tasks, such as disaster response, with a number of task sequences defined for various subtasks. To efficiently develop required task sequences, the task sequencer is designed such that task sequences can be executed interactively; further, the task sequencer is integrated with a dynamics simulator that can be used to test the sequences without actually moving the robot. We verified our system by using it to make our HRP-2Kai robot perform the tasks defined in the DARPA Robotics Challenge, a competition involving disaster response robots.
- 7 November 2016
- Published by Taylor & Francis in Advanced Robotics
- Vol. 30 (24) , 1544-1558
Effective teleoperated manipulation for humanoid robots in partially unknown real environments: team AIST-NEDO’s approach for performing the Plug Task during the DRC Finals
This paper introduces the approach used by AIST-NEDO team during the DARPA Robotics Challenge (DRC) Finals to perform the Plug Task, which is taken as a case study to show how we dealt, in general, with the manipulation tasks proposed by this challenge, using similar strategies. For that purpose, this paper also describes the system used to teleoperate our humanoid robot, HRP-2Kai, in a disaster-hit scenario that is partially unknown, inherently non-structured and where communications are not reliable. This description includes an overview of our robotic platform, as well as the overall structure of the teleoperation interface and the algorithms behind. Also, the way the Plug Task was performed using these algorithms as operation units is explained in detail, by means of a high-level description. Finally, this paper presents the results for this task obtained during the actual competition, as well as a comparison with the performance achieved by other teams that performed the Plug Task in the DRC Finals.
- 7 November 2016
- Published by Taylor & Francis in Advanced Robotics
- Vol. 30 (24) , 1544-1558
Effective teleoperated manipulation for humanoid robots in partially unknown real environments: team AIST-NEDO’s approach for performing the Plug Task during the DRC Finals
This paper introduces the approach used by AIST-NEDO team during the DARPA Robotics Challenge (DRC) Finals to perform the Plug Task, which is taken as a case study to show how we dealt, in general, with the manipulation tasks proposed by this challenge, using similar strategies. For that purpose, this paper also describes the system used to teleoperate our humanoid robot, HRP-2Kai, in a disaster-hit scenario that is partially unknown, inherently non-structured and where communications are not reliable. This description includes an overview of our robotic platform, as well as the overall structure of the teleoperation interface and the algorithms behind. Also, the way the Plug Task was performed using these algorithms as operation units is explained in detail, by means of a high-level description. Finally, this paper presents the results for this task obtained during the actual competition, as well as a comparison with the performance achieved by other teams that performed the Plug Task in the DRC Finals.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 637-643
Impact acceleration of falling humanoid robot with an airbag
Maximum absolute acceleration at impact is widely used for evaluating damage at robot fall. In this paper, we measured the impact acceleration of a life-size humanoid robot when it fell down. The experiment showed that a robot suffered maximum acceleration of over 100G at the impact. To mitigate this we tested an airbag system. Our experiment showed the airbag could reduce the peak acceleration to between 20G and 30G, which is an acceptable level for the most of robot hardware.
- 1 November 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 637-643
Impact acceleration of falling humanoid robot with an airbag
Maximum absolute acceleration at impact is widely used for evaluating damage at robot fall. In this paper, we measured the impact acceleration of a life-size humanoid robot when it fell down. The experiment showed that a robot suffered maximum acceleration of over 100G at the impact. To mitigate this we tested an airbag system. Our experiment showed the airbag could reduce the peak acceleration to between 20G and 30G, which is an acceptable level for the most of robot hardware.