Hong Yang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Hong Yang has a total of 293 co-authors. Here are the top co-authors by number of shared publications:
Ying Sun
66 shared publications- Baoping Lin
School of Chemistry and Chemical Engineering, Southeast University, Nanjing, China
54 shared publications Xueqin Zhang
50 shared publicationsMeng Wang
Southeast University
41 shared publications- Meng Wang
School of Chemistry and Chemical Engineering Southeast University Nanjing China
27 shared publications Baoping Lin
24 shared publications
Latest Publications
- 13 November 2026
- Published by Wiley in Advanced Functional Materials
Gradient‐Engineered Liquid Crystal Elastomer Scroll Springs for Snapping Chiral Spiral Flip and Mechanical Output
Soft actuators can generate complex motions, but converting reversible shape morphing into programmable mechanical output by coupling winding inversion, elastic energy storage, and snap‐through release within a single material system remains challenging. Here, we report a gradient‐engineered liquid crystal elastomer (LCE) scroll spring that undergoes large‐amplitude snapping chiral spiral flip and functions as a soft‐material analogue of a mechanical scroll spring. A through‐thickness graphite gradient creates intrinsic asymmetric actuation, while programmed mesogen alignment and scroll spring geometry couple molecular contraction with hierarchical elastic energy storage. Under thermal or photothermal stimulation, the actuator reversibly switches between oppositely wound spiral states with a total bending‐angle change of ≈3500°. The stored energy is rapidly released through snap‐through, producing rotation and jumping. Integration into mechanical assemblies further enables light‐driven gear transmission, directional propulsion, and cargo transport. This strategy converts chiral spiral flip in LCEs into programmable mechanical outputs for compact, light‐powered soft machines.
- 13 November 2026
- Published by Wiley in Advanced Functional Materials
Gradient‐Engineered Liquid Crystal Elastomer Scroll Springs for Snapping Chiral Spiral Flip and Mechanical Output
Soft actuators can generate complex motions, but converting reversible shape morphing into programmable mechanical output by coupling winding inversion, elastic energy storage, and snap‐through release within a single material system remains challenging. Here, we report a gradient‐engineered liquid crystal elastomer (LCE) scroll spring that undergoes large‐amplitude snapping chiral spiral flip and functions as a soft‐material analogue of a mechanical scroll spring. A through‐thickness graphite gradient creates intrinsic asymmetric actuation, while programmed mesogen alignment and scroll spring geometry couple molecular contraction with hierarchical elastic energy storage. Under thermal or photothermal stimulation, the actuator reversibly switches between oppositely wound spiral states with a total bending‐angle change of ≈3500°. The stored energy is rapidly released through snap‐through, producing rotation and jumping. Integration into mechanical assemblies further enables light‐driven gear transmission, directional propulsion, and cargo transport. This strategy converts chiral spiral flip in LCEs into programmable mechanical outputs for compact, light‐powered soft machines.
- 7 November 2026
- Published by Wiley in Advanced Functional Materials
Dynamic Liquid Crystal Elastomer Surfaces: From Bulk Responses to Interfacial Functions
Liquid crystal elastomers (LCEs) combine liquid crystal orientational order with the elasticity of polymer networks and respond to thermal, optical, electrical, chemical, and mechanical stimuli. These responses can change not only the shape of an LCE but also its surface morphology and properties. The resulting surface changes can regulate wetting, adhesion, friction, biological contact, and interactions with light, electromagnetic waves, and sound. This review summarizes recent progress in molecular and network design, alignment programming, surface fabrication, and functional layer integration for LCE surfaces and LCE‐driven composite interfaces. The resulting functions are organized into fluid, mechanical, and wave interactions. Guided by the central idea that bulk responses generate deformation while surface states determine interfacial behavior, this review discusses functions controlled by LCE surfaces and examines the conversion of bulk deformation into changes in surface shape and properties. These dynamic surface states enable liquid manipulation, adhesion and friction control, biological and haptic interfaces, optical readout, and wave modulation. Finally, the review discusses challenges and future directions in reliable switching, scalable fabrication, and feedback control. By linking bulk responses to changes in surface and interfacial states, it provides a framework for understanding and designing functional LCE surfaces and LCE‐driven composite interfaces.
- 7 November 2026
- Published by Wiley in Advanced Functional Materials
Dynamic Liquid Crystal Elastomer Surfaces: From Bulk Responses to Interfacial Functions
Liquid crystal elastomers (LCEs) combine liquid crystal orientational order with the elasticity of polymer networks and respond to thermal, optical, electrical, chemical, and mechanical stimuli. These responses can change not only the shape of an LCE but also its surface morphology and properties. The resulting surface changes can regulate wetting, adhesion, friction, biological contact, and interactions with light, electromagnetic waves, and sound. This review summarizes recent progress in molecular and network design, alignment programming, surface fabrication, and functional layer integration for LCE surfaces and LCE‐driven composite interfaces. The resulting functions are organized into fluid, mechanical, and wave interactions. Guided by the central idea that bulk responses generate deformation while surface states determine interfacial behavior, this review discusses functions controlled by LCE surfaces and examines the conversion of bulk deformation into changes in surface shape and properties. These dynamic surface states enable liquid manipulation, adhesion and friction control, biological and haptic interfaces, optical readout, and wave modulation. Finally, the review discusses challenges and future directions in reliable switching, scalable fabrication, and feedback control. By linking bulk responses to changes in surface and interfacial states, it provides a framework for understanding and designing functional LCE surfaces and LCE‐driven composite interfaces.
- Open Access
- 3 November 2026
- Published by Wiley in Advanced Materials
- p. e75591
Hydro‐Gated Photonic Actuators With Programmable Color and Shape
Structural color actuators integrating visual readout with motion are prized for biomimicry, yet typically operate in a coupled, color‐gradient mode with limited freedom. Here we report a photonic liquid crystal network that decouples these responses via a scattering‐gated mechanism. The material hides its structural color in the dry state but, upon water uptake, simultaneously switches on vivid coloration and executes programmable three‐dimensional deformation. Crucially, we achieve stimulus‐selective control: ethanol turns on color without motion, while heat induces motion without color. This independent, on‐demand manipulation of optical and mechanical outputs offers a transformative platform for multi‐responsive soft robotics, adaptive camouflage, and smart displays.
- 3 November 2026
- Published by Wiley in Advanced Materials
- p. e75591
Open AccessHydro‐Gated Photonic Actuators With Programmable Color and Shape
Structural color actuators integrating visual readout with motion are prized for biomimicry, yet typically operate in a coupled, color‐gradient mode with limited freedom. Here we report a photonic liquid crystal network that decouples these responses via a scattering‐gated mechanism. The material hides its structural color in the dry state but, upon water uptake, simultaneously switches on vivid coloration and executes programmable three‐dimensional deformation. Crucially, we achieve stimulus‐selective control: ethanol turns on color without motion, while heat induces motion without color. This independent, on‐demand manipulation of optical and mechanical outputs offers a transformative platform for multi‐responsive soft robotics, adaptive camouflage, and smart displays.
- 14 August 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (17) , 9420-9428
Flexible-Bridged Mechanophores Balance Toughness and Thermomechanical Actuation in Main-Chain Liquid Crystal Elastomers
Improving the toughness of liquid crystal elastomers (LCEs) without compromising their reversible actuation remains a central challenge for mechanically robust soft actuators. Here, we introduce HBDEC, a flexible-bridged nonscissile mechanophore chain extender, into main-chain LCE networks to expand their deformation and energy-dissipation capacity. HBDEC contains C6-bridged fused cyclobutane units that can be covalently incorporated into polymer backbones through thiol-ene addition. Linear-polymer mechanochemical tests support force-responsive ring opening of the fused cyclobutane units, consistent with a nonscissile hidden-length mechanism. In aligned LCE networks, HBDEC incorporation produces a composition-dependent toughness–actuation balance. Increasing HBDEC content enlarged the deformation range and improved tensile toughness by approximately 3.8-fold, while an intermediate HBDEC loading enabled the best combination of toughness and thermomechanical actuation. The optimized LCE-H10 composition achieves a tensile strength of 6.98 MPa, an elongation at break of 358%, a toughness of 9.55 MJ m–3, and an actuating stress of 2.18 MPa, together with reversible thermomechanical contraction. A macroscopic impact-buffering test further shows that LCE-H10 withstands transient loading more effectively than the HBDEC-free LCE, exhibiting larger deformation, greater kinetic energy reduction, and retained film integrity. This molecular design provides a practical route to tougher single-network LCE actuators for impact-tolerant and lightweight buffering applications.
- 14 August 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (17) , 9420-9428
Flexible-Bridged Mechanophores Balance Toughness and Thermomechanical Actuation in Main-Chain Liquid Crystal Elastomers
Improving the toughness of liquid crystal elastomers (LCEs) without compromising their reversible actuation remains a central challenge for mechanically robust soft actuators. Here, we introduce HBDEC, a flexible-bridged nonscissile mechanophore chain extender, into main-chain LCE networks to expand their deformation and energy-dissipation capacity. HBDEC contains C6-bridged fused cyclobutane units that can be covalently incorporated into polymer backbones through thiol-ene addition. Linear-polymer mechanochemical tests support force-responsive ring opening of the fused cyclobutane units, consistent with a nonscissile hidden-length mechanism. In aligned LCE networks, HBDEC incorporation produces a composition-dependent toughness–actuation balance. Increasing HBDEC content enlarged the deformation range and improved tensile toughness by approximately 3.8-fold, while an intermediate HBDEC loading enabled the best combination of toughness and thermomechanical actuation. The optimized LCE-H10 composition achieves a tensile strength of 6.98 MPa, an elongation at break of 358%, a toughness of 9.55 MJ m–3, and an actuating stress of 2.18 MPa, together with reversible thermomechanical contraction. A macroscopic impact-buffering test further shows that LCE-H10 withstands transient loading more effectively than the HBDEC-free LCE, exhibiting larger deformation, greater kinetic energy reduction, and retained film integrity. This molecular design provides a practical route to tougher single-network LCE actuators for impact-tolerant and lightweight buffering applications.
- 28 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (39) , e5197516
Intrinsically Flame‐Retardant Liquid Crystal Elastomers With Flame‐Triggered Actuation Enabled by Main‐Chain P─C Bond Incorporation
Liquid crystal elastomers (LCEs) are promising soft actuators, but their practical use is constrained by the incompatibility between fire safety and reversible actuation. Extrinsic flame‐retardant strategies can disrupt the liquid‐crystal organization and network integrity required for deformation, whereas existing phosphorus‐containing liquid crystal polymers (LCPs) are mainly rigid, aromatic thermoplastics designed for structural heat resistance rather than actuation. Here, we report a radical‐mediated P─H/ene step‐growth polymerization strategy for intrinsically flame‐retardant organophosphorus LCPs and LCEs using hypophosphorous acid and diene‐terminated mesogenic monomers. This main‐chain P─C bond‐forming strategy avoids rigid aromatic phosphorus units and affords phosphorus‐containing liquid‐crystalline systems with reduced phase‐transition temperatures together with a high phosphorus content of up to 6.8 wt.%. The resulting LCEs retain thermotropic liquid‐crystalline behavior, exhibit reversible thermoactuation, and show pronounced flame retardancy characterized by reduced heat release, self‐extinguishing behavior, and phosphorus‐promoted char formation. Notably, these organophosphorus LCEs also enable flame‐triggered actuation within only 0.4 s while preserving structural integrity and reversible function after flame exposure. This work establishes a practical molecular design route toward intrinsically flame‐retardant LCE actuators for thermally harsh environments.
- 28 July 2026
- Published by Wiley in Angewandte Chemie
- Vol. 138 (39) , e5197516
Intrinsically Flame‐Retardant Liquid Crystal Elastomers With Flame‐Triggered Actuation Enabled by Main‐Chain P─C Bond Incorporation
Liquid crystal elastomers (LCEs) are promising soft actuators, but their practical use is constrained by the incompatibility between fire safety and reversible actuation. Extrinsic flame‐retardant strategies can disrupt the liquid‐crystal organization and network integrity required for deformation, whereas existing phosphorus‐containing liquid crystal polymers (LCPs) are mainly rigid, aromatic thermoplastics designed for structural heat resistance rather than actuation. Here, we report a radical‐mediated P─H/ene step‐growth polymerization strategy for intrinsically flame‐retardant organophosphorus LCPs and LCEs using hypophosphorous acid and diene‐terminated mesogenic monomers. This main‐chain P─C bond‐forming strategy avoids rigid aromatic phosphorus units and affords phosphorus‐containing liquid‐crystalline systems with reduced phase‐transition temperatures together with a high phosphorus content of up to 6.8 wt.%. The resulting LCEs retain thermotropic liquid‐crystalline behavior, exhibit reversible thermoactuation, and show pronounced flame retardancy characterized by reduced heat release, self‐extinguishing behavior, and phosphorus‐promoted char formation. Notably, these organophosphorus LCEs also enable flame‐triggered actuation within only 0.4 s while preserving structural integrity and reversible function after flame exposure. This work establishes a practical molecular design route toward intrinsically flame‐retardant LCE actuators for thermally harsh environments.
- 27 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (39)
Intrinsically Flame‐Retardant Liquid Crystal Elastomers With Flame‐Triggered Actuation Enabled by Main‐Chain P─C Bond Incorporation
Liquid crystal elastomers (LCEs) are promising soft actuators, but their practical use is constrained by the incompatibility between fire safety and reversible actuation. Extrinsic flame‐retardant strategies can disrupt the liquid‐crystal organization and network integrity required for deformation, whereas existing phosphorus‐containing liquid crystal polymers (LCPs) are mainly rigid, aromatic thermoplastics designed for structural heat resistance rather than actuation. Here, we report a radical‐mediated P─H/ene step‐growth polymerization strategy for intrinsically flame‐retardant organophosphorus LCPs and LCEs using hypophosphorous acid and diene‐terminated mesogenic monomers. This main‐chain P─C bond‐forming strategy avoids rigid aromatic phosphorus units and affords phosphorus‐containing liquid‐crystalline systems with reduced phase‐transition temperatures together with a high phosphorus content of up to 6.8 wt.%. The resulting LCEs retain thermotropic liquid‐crystalline behavior, exhibit reversible thermoactuation, and show pronounced flame retardancy characterized by reduced heat release, self‐extinguishing behavior, and phosphorus‐promoted char formation. Notably, these organophosphorus LCEs also enable flame‐triggered actuation within only 0.4 s while preserving structural integrity and reversible function after flame exposure. This work establishes a practical molecular design route toward intrinsically flame‐retardant LCE actuators for thermally harsh environments.
- 27 July 2026
- Published by Wiley in Angewandte Chemie International Edition
- Vol. 65 (39)
Intrinsically Flame‐Retardant Liquid Crystal Elastomers With Flame‐Triggered Actuation Enabled by Main‐Chain P─C Bond Incorporation
Liquid crystal elastomers (LCEs) are promising soft actuators, but their practical use is constrained by the incompatibility between fire safety and reversible actuation. Extrinsic flame‐retardant strategies can disrupt the liquid‐crystal organization and network integrity required for deformation, whereas existing phosphorus‐containing liquid crystal polymers (LCPs) are mainly rigid, aromatic thermoplastics designed for structural heat resistance rather than actuation. Here, we report a radical‐mediated P─H/ene step‐growth polymerization strategy for intrinsically flame‐retardant organophosphorus LCPs and LCEs using hypophosphorous acid and diene‐terminated mesogenic monomers. This main‐chain P─C bond‐forming strategy avoids rigid aromatic phosphorus units and affords phosphorus‐containing liquid‐crystalline systems with reduced phase‐transition temperatures together with a high phosphorus content of up to 6.8 wt.%. The resulting LCEs retain thermotropic liquid‐crystalline behavior, exhibit reversible thermoactuation, and show pronounced flame retardancy characterized by reduced heat release, self‐extinguishing behavior, and phosphorus‐promoted char formation. Notably, these organophosphorus LCEs also enable flame‐triggered actuation within only 0.4 s while preserving structural integrity and reversible function after flame exposure. This work establishes a practical molecular design route toward intrinsically flame‐retardant LCE actuators for thermally harsh environments.
- Open Access
- 18 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (41) , e73780
MOF‐Induced Pore Confinement: A Strategy for Thermomechanically Robust and High‐Strength Liquid Crystal Elastomers
Liquid crystal elastomers (LCEs) are premier candidates for soft robotics due to their large, reversible actuation. However, their utility is often restricted by a fundamental trade‐off: as temperature increases, orientational order diminishes, causing a sharp loss in load‐bearing capacity and actuation stress above the isotropic transition. Here, we report a sequential integration strategy that overcomes this thermal limitation by embedding ultrathin Cu‐TCPP metal‐organic framework (MOF) nanosheets within the LCE network. This approach establishes a pore‐confinement‐enabled architecture that restricts segmental relaxation and preserves molecular alignment even under harsh thermal conditions. The resulting LCE‐MOF composites exhibit exceptional mechanical robustness, achieving a tensile strength of 79 MPa at 25°C and maintaining 4.2 MPa at 200°C. Notably, the materials deliver a high actuation stress of 3.9 MPa at 200°C, significantly outperforming composites fabricated via conventional direct mixing. This confinement strategy effectively decouples mechanical integrity from thermal transitions, as demonstrated by a high‐performance passive thermal valve capable of reliable switching in extreme environments. Our work provides a versatile methodology for designing resilient, high‐output soft actuators for aerospace, industrial, and high‐temperature hazardous applications where thermal stability and reliable actuation are critically demanded.
- 18 June 2026
- Published by Wiley in Advanced Materials
- Vol. 38 (41) , e73780
Open AccessMOF‐Induced Pore Confinement: A Strategy for Thermomechanically Robust and High‐Strength Liquid Crystal Elastomers
Liquid crystal elastomers (LCEs) are premier candidates for soft robotics due to their large, reversible actuation. However, their utility is often restricted by a fundamental trade‐off: as temperature increases, orientational order diminishes, causing a sharp loss in load‐bearing capacity and actuation stress above the isotropic transition. Here, we report a sequential integration strategy that overcomes this thermal limitation by embedding ultrathin Cu‐TCPP metal‐organic framework (MOF) nanosheets within the LCE network. This approach establishes a pore‐confinement‐enabled architecture that restricts segmental relaxation and preserves molecular alignment even under harsh thermal conditions. The resulting LCE‐MOF composites exhibit exceptional mechanical robustness, achieving a tensile strength of 79 MPa at 25°C and maintaining 4.2 MPa at 200°C. Notably, the materials deliver a high actuation stress of 3.9 MPa at 200°C, significantly outperforming composites fabricated via conventional direct mixing. This confinement strategy effectively decouples mechanical integrity from thermal transitions, as demonstrated by a high‐performance passive thermal valve capable of reliable switching in extreme environments. Our work provides a versatile methodology for designing resilient, high‐output soft actuators for aerospace, industrial, and high‐temperature hazardous applications where thermal stability and reliable actuation are critically demanded.
- 18 March 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (7) , 4046-4055
Photorewritable Liquid Crystal Elastomers via Nanostructured Azobenzene Switches: Enabling Reconfigurable Anisotropy without Alignment Layers
- 18 March 2026
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 59 (7) , 4046-4055
Photorewritable Liquid Crystal Elastomers via Nanostructured Azobenzene Switches: Enabling Reconfigurable Anisotropy without Alignment Layers
- 26 December 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (8) , 2475-2491
Toward mechanically robust liquid crystal elastomers: multiscale strategies from molecular engineering to hierarchical integration
This feature article highlights recent strategies for enhancing the mechanical robustness of liquid crystal elastomers through molecular design, network engineering, and hierarchical integration.
- 26 December 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Communications
- Vol. 62 (8) , 2475-2491
Toward mechanically robust liquid crystal elastomers: multiscale strategies from molecular engineering to hierarchical integration
This feature article highlights recent strategies for enhancing the mechanical robustness of liquid crystal elastomers through molecular design, network engineering, and hierarchical integration.
- 28 February 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (5) , 2736-2744
Organosilicon Liquid Crystal Polymers and Elastomers Prepared by Metal-Free Photocatalytic Hydrosilylation Polymerization
In the synthesis of organosilicon liquid crystal polymers (LCPs) and elastomers (LCEs), platinum-catalyzed hydrosilylation stands as the predominant synthetic method. However, this approach often relies on noble platinum catalysts that are difficult to remove. In this study, we synthesize a series of organosilicon LCPs and LCEs via photocatalytic, metal-free hydrosilylation polymerization of silanes and diene-terminated mesogenic monomers, using an organic photocatalyst alongside a hydrogen atom transfer catalyst. The resulting LCPs and LCEs have well-defined backbone structures, excellent thermal and mechanical properties. Notably, the monodomain LCEs exhibit impressive thermal-driven actuation capabilities due to their main-chain organosilicon structures and low LC-to-isotropic phase transition temperatures. This advance is expected to provide new opportunities for the applications of organosilicon LCP and LCE materials in biomedical research and material science.
- 28 February 2025
- Published by American Chemical Society (ACS) in Macromolecules
- Vol. 58 (5) , 2736-2744
Organosilicon Liquid Crystal Polymers and Elastomers Prepared by Metal-Free Photocatalytic Hydrosilylation Polymerization
In the synthesis of organosilicon liquid crystal polymers (LCPs) and elastomers (LCEs), platinum-catalyzed hydrosilylation stands as the predominant synthetic method. However, this approach often relies on noble platinum catalysts that are difficult to remove. In this study, we synthesize a series of organosilicon LCPs and LCEs via photocatalytic, metal-free hydrosilylation polymerization of silanes and diene-terminated mesogenic monomers, using an organic photocatalyst alongside a hydrogen atom transfer catalyst. The resulting LCPs and LCEs have well-defined backbone structures, excellent thermal and mechanical properties. Notably, the monodomain LCEs exhibit impressive thermal-driven actuation capabilities due to their main-chain organosilicon structures and low LC-to-isotropic phase transition temperatures. This advance is expected to provide new opportunities for the applications of organosilicon LCP and LCE materials in biomedical research and material science.