Johan Pelck Olsen
Research Subjects
Johan Pelck Olsen has a total of 45 co-authors. Here are the top co-authors by number of shared publications:
- Peter Westh
Technical University of Denmark
12 shared publications Kim Borch
Novozymes A/S, Bagsværd, Denmark
11 shared publications- Jeppe Kari
Department of Biotechnology and Biomedicine, Technical University of Denmark
9 shared publications - Michael Skovbo Windahl
Novozymes A/S, Biologiensvej 2, DK-2800 Kgs. Lyngby, Denmark
4 shared publications Nicolaj Cruys-Bagger
From the Roskilde University, NSM, Research Unit for Functional Biomaterials, 1 Universitetsvej, Building 28, DK-4000 Denmark and
3 shared publications- Trine Holst Sørensen
§Novozymes A/S, Krogshøjvej 36, DK-2880 Bagsværd, Denmark
3 shared publications
Latest Publications
- Open Access
- 22 June 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-10
Physical constraints and functional plasticity of cellulases
Enzyme reactions, both in Nature and technical applications, commonly occur at the interface of immiscible phases. Nevertheless, stringent descriptions of interfacial enzyme catalysis remain sparse, and this is partly due to a shortage of coherent experimental data to guide and assess such work. In this work, we produced and kinetically characterized 83 cellulases, which revealed a conspicuous linear free energy relationship (LFER) between the substrate binding strength and the activation barrier. The scaling occurred despite the investigated enzymes being structurally and mechanistically diverse. We suggest that the scaling reflects basic physical restrictions of the hydrolytic process and that evolutionary selection has condensed cellulase phenotypes near the line. One consequence of the LFER is that the activity of a cellulase can be estimated from its substrate binding strength, irrespectively of structural and mechanistic details, and this appears promising for in silico selection and design within this industrially important group of enzymes.
- 22 June 2021
- Published by Springer Nature in Nature Communications
- Vol. 12 (1) , 1-10
Open AccessPhysical constraints and functional plasticity of cellulases
Enzyme reactions, both in Nature and technical applications, commonly occur at the interface of immiscible phases. Nevertheless, stringent descriptions of interfacial enzyme catalysis remain sparse, and this is partly due to a shortage of coherent experimental data to guide and assess such work. In this work, we produced and kinetically characterized 83 cellulases, which revealed a conspicuous linear free energy relationship (LFER) between the substrate binding strength and the activation barrier. The scaling occurred despite the investigated enzymes being structurally and mechanistically diverse. We suggest that the scaling reflects basic physical restrictions of the hydrolytic process and that evolutionary selection has condensed cellulase phenotypes near the line. One consequence of the LFER is that the activity of a cellulase can be estimated from its substrate binding strength, irrespectively of structural and mechanistic details, and this appears promising for in silico selection and design within this industrially important group of enzymes.
- Open Access
Physical constrains and functional plasticity of cellulases: Linear scaling relationships for a heterogeneous enzyme reaction
Enzyme reactions, both in Nature and technical applications, commonly occur at the interface of immiscible phases. Nevertheless, stringent descriptions of interfacial enzyme catalysis remain sparse, and this is partly due to a shortage of coherent experimental data to guide and assess such work. We have produced and kinetically characterized 83 cellulases, which revealed a conspicuous linear free energy relationship (LFER) between the strength of substrate binding and the activation barrier. This common scaling occurred despite the investigated enzymes were structurally and mechanistically diverse. We suggest that the scaling reflects basic physical restrictions of the hydrolytic process and that evolutionary selection have condensed cellulase phenotypes near the line. One consequence of the LFER is that the activity of a cellulase can be estimated from substrate binding strength, irrespectively of structural and mechanistic details, and this appears promising for in silico selection and design within this industrially important group of enzymes. On a more general note, the LFER may identify a link to inorganic heterogeneous catalysis, and hence open for the implementation of approaches from this field within interfacial enzymology.
Open AccessPhysical constrains and functional plasticity of cellulases: Linear scaling relationships for a heterogeneous enzyme reaction
Enzyme reactions, both in Nature and technical applications, commonly occur at the interface of immiscible phases. Nevertheless, stringent descriptions of interfacial enzyme catalysis remain sparse, and this is partly due to a shortage of coherent experimental data to guide and assess such work. We have produced and kinetically characterized 83 cellulases, which revealed a conspicuous linear free energy relationship (LFER) between the strength of substrate binding and the activation barrier. This common scaling occurred despite the investigated enzymes were structurally and mechanistically diverse. We suggest that the scaling reflects basic physical restrictions of the hydrolytic process and that evolutionary selection have condensed cellulase phenotypes near the line. One consequence of the LFER is that the activity of a cellulase can be estimated from substrate binding strength, irrespectively of structural and mechanistic details, and this appears promising for in silico selection and design within this industrially important group of enzymes. On a more general note, the LFER may identify a link to inorganic heterogeneous catalysis, and hence open for the implementation of approaches from this field within interfacial enzymology.
- Open Access
- 8 January 2020
- Published by Portland Press Ltd. in Biochemical Journal
- Vol. 477 (1) , 99-110
Molecular recognition in the product site of cellobiohydrolase Cel7A regulates processive step length
Cellobiohydrolase Cel7A is an industrial important enzyme that breaks down cellulose by a complex processive mechanism. The enzyme threads the reducing end of a cellulose strand into its tunnel-shaped catalytic domain and progresses along the strand while sequentially releasing the disaccharide cellobiose. While some molecular details of this intricate process have emerged, general structure-function relationships for Cel7A remain poorly elucidated. One interesting aspect is the occurrence of particularly strong ligand interactions in the product binding site. In this work, we analyze these interactions in Cel7A from Trichoderma reesei with special emphasis on the Arg251 and Arg394 residues. We made extensive biochemical characterization of enzymes that were mutated in these two positions and showed that the arginine residues contributed strongly to product binding. Specifically, about 50% of the total standard free energy of product binding could be ascribed to four hydrogen bonds to Arg251 and Arg394, which had previously been identified in crystal structures. Mutation of either Arg251 or Arg394 lowered production inhibition of Cel7A, but at the same time altered the enzyme product profile and resulted in about 50% reduction in both processivity and hydrolytic activity. The position of the two arginine residues closely matches the two-fold screw axis symmetry of the substrate, and this energetically favors the productive enzyme-substrate complex. Our results indicate that the strong and specific ligand interactions of Arg251 and Arg394 provide a simple proofreading system that controls the step-length during consecutive hydrolysis and minimizes dead time associated with transient, non-productive complexes.
- 8 January 2020
- Published by Portland Press Ltd. in Biochemical Journal
- Vol. 477 (1) , 99-110
Open AccessMolecular recognition in the product site of cellobiohydrolase Cel7A regulates processive step length
Cellobiohydrolase Cel7A is an industrial important enzyme that breaks down cellulose by a complex processive mechanism. The enzyme threads the reducing end of a cellulose strand into its tunnel-shaped catalytic domain and progresses along the strand while sequentially releasing the disaccharide cellobiose. While some molecular details of this intricate process have emerged, general structure-function relationships for Cel7A remain poorly elucidated. One interesting aspect is the occurrence of particularly strong ligand interactions in the product binding site. In this work, we analyze these interactions in Cel7A from Trichoderma reesei with special emphasis on the Arg251 and Arg394 residues. We made extensive biochemical characterization of enzymes that were mutated in these two positions and showed that the arginine residues contributed strongly to product binding. Specifically, about 50% of the total standard free energy of product binding could be ascribed to four hydrogen bonds to Arg251 and Arg394, which had previously been identified in crystal structures. Mutation of either Arg251 or Arg394 lowered production inhibition of Cel7A, but at the same time altered the enzyme product profile and resulted in about 50% reduction in both processivity and hydrolytic activity. The position of the two arginine residues closely matches the two-fold screw axis symmetry of the substrate, and this energetically favors the productive enzyme-substrate complex. Our results indicate that the strong and specific ligand interactions of Arg251 and Arg394 provide a simple proofreading system that controls the step-length during consecutive hydrolysis and minimizes dead time associated with transient, non-productive complexes.
- 12 November 2018
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 8 (12) , 11966-11972
Sabatier Principle for Interfacial (Heterogeneous) Enzyme Catalysis
- 12 November 2018
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 8 (12) , 11966-11972
Sabatier Principle for Interfacial (Heterogeneous) Enzyme Catalysis
- 13 April 2017
- Published by Oxford University Press (OUP)
- p. 74-96
Ambiguity and the Politics of Accountability
In mainstream principal–agent approaches, as well as in much democratic theory and organization theory, accountability is linked to a belief in human agency and history determined by human will, causal understanding, and control. An institutional approach considers the possibility that events are not necessarily a product of the deliberate choices of identifiable actors, and takes into account that ambiguity, uncertainty, and limited control are inherent to political and organizational decision making. The fluidity and unresolved conflicts of political life make it difficult to conclude who is responsible and should be held to account and learn from experience and there is more to accountability processes than decision making, control, and compliance. Ambiguity and uncertainty about the past—what has happened, why, and who is responsible and should be held to account—open the way for the politics of accountability, involving sense-making processes, competing interpretations, and coping with conflict.
- 13 April 2017
- Published by Oxford University Press (OUP)
- p. 74-96
Ambiguity and the Politics of Accountability
In mainstream principal–agent approaches, as well as in much democratic theory and organization theory, accountability is linked to a belief in human agency and history determined by human will, causal understanding, and control. An institutional approach considers the possibility that events are not necessarily a product of the deliberate choices of identifiable actors, and takes into account that ambiguity, uncertainty, and limited control are inherent to political and organizational decision making. The fluidity and unresolved conflicts of political life make it difficult to conclude who is responsible and should be held to account and learn from experience and there is more to accountability processes than decision making, control, and compliance. Ambiguity and uncertainty about the past—what has happened, why, and who is responsible and should be held to account—open the way for the politics of accountability, involving sense-making processes, competing interpretations, and coping with conflict.
- 27 December 2016
- Published by American Chemical Society (ACS) in Biochemistry
- Vol. 56 (1) , 167-178
Anomeric Selectivity and Product Profile of a Processive Cellulase
Cellobiohydrolases (CBHs) make up an important group of enzymes for both natural carbon cycling and industrial deconstruction of lignocellulosic biomass. The consecutive hydrolysis of one cellulose strand relies on an intricate pattern of enzyme–substrate interactions in the long, tunnel-shaped binding site of the CBH. In this work, we have investigated the initial complexation mode with cellulose of the most thoroughly studied CBH, Cel7A from Hypocrea jecorina (HjCel7A). We found that HjCel7A predominantly produces glucose when it initiates a processive run on insoluble microcrystalline cellulose, confirming the validity of an even and odd product ratio as an estimate of processivity. Moreover, the glucose released from cellulose was predominantly α-glucose. A link between the initial binding mode of the enzyme and the reducing end configuration was investigated by inhibition studies with the two anomers of cellobiose. A clear preference for β-cellobiose in product binding site +2 was observed for HjCel7A, but not the homologous endoglucanase, HjCe7B. Possible relationships between this anomeric preference in the product site and the prevalence of odd-numbered initial-cut products are discussed, and a correlation between processivity and anomer selectivity is proposed.
- 27 December 2016
- Published by American Chemical Society (ACS) in Biochemistry
- Vol. 56 (1) , 167-178
Anomeric Selectivity and Product Profile of a Processive Cellulase
Cellobiohydrolases (CBHs) make up an important group of enzymes for both natural carbon cycling and industrial deconstruction of lignocellulosic biomass. The consecutive hydrolysis of one cellulose strand relies on an intricate pattern of enzyme–substrate interactions in the long, tunnel-shaped binding site of the CBH. In this work, we have investigated the initial complexation mode with cellulose of the most thoroughly studied CBH, Cel7A from Hypocrea jecorina (HjCel7A). We found that HjCel7A predominantly produces glucose when it initiates a processive run on insoluble microcrystalline cellulose, confirming the validity of an even and odd product ratio as an estimate of processivity. Moreover, the glucose released from cellulose was predominantly α-glucose. A link between the initial binding mode of the enzyme and the reducing end configuration was investigated by inhibition studies with the two anomers of cellobiose. A clear preference for β-cellobiose in product binding site +2 was observed for HjCel7A, but not the homologous endoglucanase, HjCe7B. Possible relationships between this anomeric preference in the product site and the prevalence of odd-numbered initial-cut products are discussed, and a correlation between processivity and anomer selectivity is proposed.
- 9 December 2016
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 114 (3) , 696-700
Endo/exo‐synergism of cellulases increases with substrate conversion
Synergy between cellulolytic enzymes is important for their industrial utilization, and numerous studies have addressed the problem of how to optimize the composition of enzyme cocktails with respect to this. The degree of synergy (DS) may change with substrate conversion, and some studies have suggested a maximum in DS early in the process. Here, we systematically investigated interrelationships of DS and conversion in a model system covering a wide range of experimental conditions. The results did not reveal any correlation between DS and contact time, but when plotted against the degree of substrate conversion we saw a systematic increase in DS. We suggest that this is linked to a decreasing reactivity of the substrate. Hence, synergy became increasingly important as the recalcitrance of the remaining substrate grew. Such conversion dependent changes in DS appear to be important both in mechanistic studies and attempts to find industrial enzymes blends with optimal synergy. Biotechnol. Bioeng. 2017;114: 696–700.
- 9 December 2016
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 114 (3) , 696-700
Endo/exo‐synergism of cellulases increases with substrate conversion
Synergy between cellulolytic enzymes is important for their industrial utilization, and numerous studies have addressed the problem of how to optimize the composition of enzyme cocktails with respect to this. The degree of synergy (DS) may change with substrate conversion, and some studies have suggested a maximum in DS early in the process. Here, we systematically investigated interrelationships of DS and conversion in a model system covering a wide range of experimental conditions. The results did not reveal any correlation between DS and contact time, but when plotted against the degree of substrate conversion we saw a systematic increase in DS. We suggest that this is linked to a decreasing reactivity of the substrate. Hence, synergy became increasingly important as the recalcitrance of the remaining substrate grew. Such conversion dependent changes in DS appear to be important both in mechanistic studies and attempts to find industrial enzymes blends with optimal synergy. Biotechnol. Bioeng. 2017;114: 696–700.
- 18 July 2016
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 114 (1) , 53-62
Loop variants of the thermophile Rasamsonia emersonii Cel7A with improved activity against cellulose
Cel7A cellobiohydrolases perform processive hydrolysis on one strand of cellulose, which is threaded through the enzyme's substrate binding tunnel. The tunnel structure results from a groove in the catalytic domain, which is covered by a number of loops. These loops have been identified as potential targets for engineering of this industrially important enzyme family, but only few systematic studies on this have been made. Here we show that two asparagine residues (N194 and N197) positioned in the loop covering the glucopyranose subsite −4 (recently denoted B2 loop) of the thermostable Cel7A from Rasamsonia emersonii had profound effects on both substrate interactions and catalytic efficacy. At room temperature the double mutant N194A/N197A showed strongly reduced substrate affinity with a water‐cellulose partitioning coefficient threefold lower than the wild type. Yet, this variant was catalytically efficient with a maximal turnover about twice as high as the wild type. Analogous but smaller changes were found for the single mutants. Analysis of these changes in affinity and kinetics as a function of temperature, led to the conclusion that replacement of N194 and particularly N197 with alanine leads to faster enzyme‐substrate dissociation. Conversely, these residues appeared to have little or no effect on the rate of association. We suggest that the controlled adjustment of the enzyme‐substrate dissociation prompts faster cellulolytic enzymes. Biotechnol. Bioeng. 2017;114: 53–62.
- 18 July 2016
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 114 (1) , 53-62
Loop variants of the thermophile Rasamsonia emersonii Cel7A with improved activity against cellulose
Cel7A cellobiohydrolases perform processive hydrolysis on one strand of cellulose, which is threaded through the enzyme's substrate binding tunnel. The tunnel structure results from a groove in the catalytic domain, which is covered by a number of loops. These loops have been identified as potential targets for engineering of this industrially important enzyme family, but only few systematic studies on this have been made. Here we show that two asparagine residues (N194 and N197) positioned in the loop covering the glucopyranose subsite −4 (recently denoted B2 loop) of the thermostable Cel7A from Rasamsonia emersonii had profound effects on both substrate interactions and catalytic efficacy. At room temperature the double mutant N194A/N197A showed strongly reduced substrate affinity with a water‐cellulose partitioning coefficient threefold lower than the wild type. Yet, this variant was catalytically efficient with a maximal turnover about twice as high as the wild type. Analogous but smaller changes were found for the single mutants. Analysis of these changes in affinity and kinetics as a function of temperature, led to the conclusion that replacement of N194 and particularly N197 with alanine leads to faster enzyme‐substrate dissociation. Conversely, these residues appeared to have little or no effect on the rate of association. We suggest that the controlled adjustment of the enzyme‐substrate dissociation prompts faster cellulolytic enzymes. Biotechnol. Bioeng. 2017;114: 53–62.
- 11 June 2016
- Published by Springer Nature in Cellulose
- Vol. 23 (4) , 2349-2361
Interrelationships between cellulase activity and cellulose particle morphology
- 11 June 2016
- Published by Springer Nature in Cellulose
- Vol. 23 (4) , 2349-2361
Interrelationships between cellulase activity and cellulose particle morphology
- 4 December 2015
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 113 (6) , 1178-1186
Mechanism of product inhibition for cellobiohydrolase Cel7A during hydrolysis of insoluble cellulose
The cellobiohydrolase cellulase Cel7A is extensively utilized in industrial treatment of lignocellulosic biomass under conditions of high product concentrations, and better understanding of inhibition mechanisms appears central in attempts to improve the efficiency of this process. We have implemented an electrochemical biosensor assay for product inhibition studies of cellulases acting on their natural substrate, cellulose. Using this method we measured the hydrolytic rate of Cel7A as a function of both product (inhibitor) concentration and substrate load. This data enabled analyses along the lines of conventional enzyme kinetic theory. We found that the product cellobiose lowered the maximal rate without affecting the Michaelis constant, and this kinetic pattern could be rationalized by two fundamentally distinct molecular mechanisms. One was simple reversibility, that is, an increasing rate of the reverse reaction, lowering the net hydrolytic velocity as product concentrations increase. Strictly this is not a case of inhibition, as no catalytically inactive is formed. The other mechanism that matched the kinetic data was noncompetitive inhibition with an inhibition constant of 490 ± 40 μM. Noncompetitive inhibition implies that the inhibitor binds with comparable strength to either free enzyme or an enzymesubstrate complex, that is, that association between enzyme and substrate has no effect on the binding of the inhibitor. This mechanism is rarely observed, but we argue, that the special architecture of Cel7A with numerous subsites for binding of both substrate and product could give rise to a true noncompetitive inhibition mechanism. Biotechnol. Bioeng. 2016;113: 1178–1186.
- 4 December 2015
- Published by Wiley in Biotechnology and Bioengineering
- Vol. 113 (6) , 1178-1186
Mechanism of product inhibition for cellobiohydrolase Cel7A during hydrolysis of insoluble cellulose
The cellobiohydrolase cellulase Cel7A is extensively utilized in industrial treatment of lignocellulosic biomass under conditions of high product concentrations, and better understanding of inhibition mechanisms appears central in attempts to improve the efficiency of this process. We have implemented an electrochemical biosensor assay for product inhibition studies of cellulases acting on their natural substrate, cellulose. Using this method we measured the hydrolytic rate of Cel7A as a function of both product (inhibitor) concentration and substrate load. This data enabled analyses along the lines of conventional enzyme kinetic theory. We found that the product cellobiose lowered the maximal rate without affecting the Michaelis constant, and this kinetic pattern could be rationalized by two fundamentally distinct molecular mechanisms. One was simple reversibility, that is, an increasing rate of the reverse reaction, lowering the net hydrolytic velocity as product concentrations increase. Strictly this is not a case of inhibition, as no catalytically inactive is formed. The other mechanism that matched the kinetic data was noncompetitive inhibition with an inhibition constant of 490 ± 40 μM. Noncompetitive inhibition implies that the inhibitor binds with comparable strength to either free enzyme or an enzymesubstrate complex, that is, that association between enzyme and substrate has no effect on the binding of the inhibitor. This mechanism is rarely observed, but we argue, that the special architecture of Cel7A with numerous subsites for binding of both substrate and product could give rise to a true noncompetitive inhibition mechanism. Biotechnol. Bioeng. 2016;113: 1178–1186.