JBJoaquim Jose Barroso

Joaquim Jose Barroso

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Joaquim Jose Barroso has a total of 348 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • On the physical equivalence between TE 10 waveguide and free-space TEM reflection loss measurements

    by Divani Barbosa Gavinier, Carlos Eduardo Santos Leal, Joaquim José Barroso, Braulio Haruo Kondo Lopes, Leonardo Iusuti de Medeiros, Maurício Ribeiro Baldan

    Reflection loss (RL) measurements performed in rectangular waveguides under TE 10 mode often exhibit systematic frequency offsets when compared with free-space transverse electromagnetic (TEM) plane-wave results, even for identical material under test and backing conditions. This work establishes the physical conditions required for equivalence between TE 10 waveguide–based and free-space TEM RL measurements. We demonstrate that equivalence is achieved only when two coupled conditions are simultaneously satisfied: (i) an effective thickness correction accounting for the oblique propagation path inherent to the TE 10 mode and (ii) a physically consistent intrinsic impedance formulation relating electric and magnetic field components under oblique transmission. Neither condition alone is sufficient. When applied jointly, these corrections eliminate the frequency offset between TE 10 - and TEM-based RL responses, yielding overlapping results across the entire frequency band. The proposed framework is validated through analytical modeling, full-wave electromagnetic simulations, and experimental measurements performed in a rectangular waveguide. Importantly, the analysis is independent of the specific material investigated, providing a general and metrologically consistent basis for comparing guided-wave and free-space RL measurements.

  • Characterization of the Ba(1–x)Sr(x)(Zr0.2Ti0.8)O3 Ceramic as a Nonlinear Capacitor for LC-Based Nonlinear Transmission Lines

    by Rangel G. Aredes, Jose O. Rossi, Lauro P. Silva Neto, Gustavo N. de Lima, Eduardo Antonelli, Joaquim J. Barroso, Edl Schamiloglu

    Ferroelectric ceramics can be used as nonlinear capacitors in nonlinear transmission lines (NLTLs) to generate radio frequency with applications in defense systems and pulsed radars. Their primary feature is their nonlinear behavior, which is the variation in capacitance with temperature and electric field. One crucial ceramic material for these uses is barium titanate (BT). The ceramic paraelectric phase, however, is above the Curie temperature of $120~^{\circ }$ C in its pure form. We synthesized and studied the ${\mathrm {Ba}}_{(1 -x)}$ ${\mathrm {Sr}}_{(x)}$ (Zr0.2Ti0.8)O3 ceramic as a nonlinear element by downshifting the paraelectric to ferroelectric phase transition close to ambient temperature to enhance the nonlinear characteristics. By varying the frequency and applied electric field, we examined the capacitance behavior of this material. Additionally, we discovered that this ceramic composite’s paraelectric phase transition occurred at a concentration of ${x} =0.5$ % strontium. To illustrate the RF generation, we constructed and tested a nonlinear LC circuit employing ten ceramic samples that contained 0.5% strontium as nonlinear capacitors. Finally, we estimated the RF frequency generated to be 5.4 MHz by deriving expressions for the propagating solitary-wave solution, which agrees with the experimentally determined value.


  • Ferroelectric Ceramic Synthesis and Breakdown Characterization on Pulsed Condition Using High-Voltage Half-Sine Pulses of Microsecond Duration

    by Rangel G. Aredes, Lauro P. Silva Neto, Jose O. Rossi, Eduardo Antonelli, Manuel H. Lente, Joaquim J. Barroso, Elizete G. L. Rangel, Edl Schamiloglu

    There are several high-power microwave sources nowadays, but few of them work with passive components. The nonlinear transmission lines (NLTLs) are high-power radio frequency (RF) generators that use nonlinear passive components, such as ceramic capacitors selected due to the material’s high dielectric strength and permittivity. The main requirement of these passive components is to provide a change in the capacitance or inductance as a function of the applied voltage. In this work, we synthesized ceramic capacitors with three different compositions based on barium, strontium, zirconium, and titanium, named by BSZT. Beyond that, the scanning electrode microscope (SEM) images of the samples measured the density and grain size via the intercept method. The 0.5BSZT composition results showed a grain size of the order of 34 $\mu $ m and a density of the order of 5.75 g/cm $^{3}$ . The 20 and 30BSZT compositions showed grain sizes and densities of 0.8 $\mu $ m and 5.5 g/cm $^{3}$ , respectively. The breakdown tests showed that samples with higher grain size have higher dielectric strength. The ferroelectric ceramic breakdown characterization was performed under pulsed conditions using high-voltage half-sine wave pulses with microseconds duration. For the 0.5BSZT composition, the average dielectric strength was about 10.33 kV/mm with a standard deviation of 3.88 kV/mm. We also measured the polarization as a function of the electrical field to determine recoverable energy storage density and the coercive field of the sample related to the material losses. The experimental constraints discussed about dielectric strength measurements avoid wrong interpretations of data acquisition.


  • Performance Evaluation of Low-Voltage Capacitive Nonlinear Transmission Lines

    by Elizete G. Lopes Rangel, José O. Rossi, Joaquim J. Barroso, Fernanda S. Yamasaki, Lauro P. Silva Neto, Edl Schamiloglu

    The potential application of low-voltage capacitive nonlinear transmission lines (NLTLs) in radar communication systems, electronic attack systems, telecommunications, and electromedical equipment has motivated studies of their performance due to the simple construction and use of low-cost commercial components. Low-voltage capacitive NLTLs consist of a nonlinear and dispersive propagation medium. The practical implementation of these lines employs radio frequency (RF) generation using commercial electronic components such as inductors and reverse-biased varactor diodes as nonlinear elements. This article presents the experimental results of capacitive NLTLs from 240 MHz to 1 GHz, showing the behavior of oscillations produced in the time and frequency domains fast Fourier transform (FFT). In the time domain, the oscillations showed a damping behavior that arises from the nonlinear behavior of the varactor diodes in response to a rectangular input pulse. Furthermore, the analysis of damping oscillations in the frequency domain demonstrated a spread-spectrum signal that negatively affects the objective of using NLTLs as generators of pulsed RF signals, for which a high spectral purity is required. Finally, we give a summary of the research performance with the practical constraints of these lines.


  • Extraction Method for Unique Determination of Complex Permittivity From Graphical Analysis of Natural Frequencies

    by Ugur C. Hasar, Gokhan Ozturk, Yunus Kaya, Mona S. S. Alfaqawi, Joaquim José Barroso, Mehmet Ertugrul, Omar M. Ramahi

    A time-domain free-space extraction procedure is proposed to uniquely determine the relative complex permittivity ϵr(ω) based on two-sets of natural frequencies of a metal- and air-backed dielectric sample. A graphical analysis is applied for evaluating whether unique ϵr(ω) can be extracted by using such natural frequencies. The method is numerically validated by using two dielectric samples with different ϵ(ω) for the ideal case (no noise) and under the influence of noise with different signal-to-noise ratios.


  • Development of Tunable Ferroelectric Ceramic Capacitors

    by Rangel G. Aredes, Eduardo Antonelli, Lauro P. Silva Neto, Jose O. Rossi, Gustavo N. Lima, Joaquim J. Barroso, Elizete G. L. Rangel, Edl Schamiloglu

    Ferroelectric perovskite ceramics with a high dielectric constant, low loss, high tunability, and high electric breakdown are ideal for Nonlinear Transmission Lines (NLTLs) to generate radio frequency (RF) signals at high-power levels. To achieve the required properties, a comprehensive study of the material phase transitions and the optimal ratio adjustment between the chemical elements in the perovskite crystal structure are required. The advancement of this solid-state technology is the most promising optimization for NLTLs in developing high-power (>100 MW) devices with high tunability (>60%) and high repetition rate (>1 kHz) for soliton generation. The barium strontium zirconium titanate (BSZT) ceramic compositions were synthesized and characterized to maximize material tunability. The composition Ba 0.97 Sr 0.03 Zr 0.2 Ti 0.8 O 3 exhibited a high permittivity (>12,200), low loss tangent (<0.01), and an exceptional tunability of the order of 79% at an electric field of 10 kV/mm near the phase temperature transition at 300 K. Ferroelectric ceramic is an outstanding material with promising characteristics for producing RF signals in an NLTL, and here, the BSZT is considered for this application.


  • Temporal Reflection Response of Plane Waves Within an N-Layer Structure Involving Bianisotropy

    by Ugur C. Hasar, Gokhan Ozturk, Yunus Kaya, Joaquim José Barroso, Mehmet Ertugrul, Omar M. Ramahi, Mona S. S. Alfaqawi

    The temporal reflection response of an N -layer composite structure involving bianisotropic behavior is examined for the first time in the literature. Toward this goal, the wave matrix method, which is fundamental, relatively easier to apply, and compact and iterative suitable for analysis of multilayer structures, is first extended to the analysis of an interface separating two different media involving bianisotropy. Next, the reflection response of the whole structure is derived in terms of series form to better analyze its temporal behavior. Then, frequency-domain and time-domain responses of the whole structure are expressed using a special reflection coefficient (the reduced reflection coefficient) by way of the concept of subregions. A numerical analysis is performed to demonstrate the applicability of our formalism for two different polarization types (perpendicular and parallel).


  • Artificial Neural Network Model for Evaluating Parameters of Reflection-Asymmetric Samples From Reference-Plane-Invariant Measurements

    by Ugur C. Hasar, Hamdullah Ozturk, Mehmet Ertugrul, Joaquim J. Barroso, Omar M. Ramahi

    A technique based on artificial neural network (ANN) is proposed to extract electromagnetic properties of reflection-asymmetric samples from reference-plane-invariant scattering parameter measurements. It first determines reference plane transformation distances and then extract material properties. The number of neurons in the hidden layer of the ANN model was evaluated subject to accuracy and time constraints. We examined the conformity of the dataset of the ANN model and the required time for the training process by considering different number of neurons in the selected hidden layer. S-parameter waveguide measurements at X-band (8.2-12.4 GHz) of two bianisotropic metamaterial slabs, as reflection-asymmetric samples, composed of square-shaped split-ring-resonators and asymmetrically positioned into their measurement cells were used to validate the ANN model and evaluate the effectiveness of the proposed method in extracting the electromagnetic properties.


  • Honey–Water Content Analysis by Mixing Models Using a Self-Calibrating Microwave Method

    by Hafize Hasar, Ugur C. Hasar, Yunus Kaya, Hamdullah Ozturk, Mucahit Izginli, Taskin Oztas, Nevzat Aslan, Mehmet Ertugrul, Joaquim J. Barroso, Omar M. Ramahi

    Microwave techniques, as an indirect approach, can be applied for analyzing water content in honey by way of permittivity measurements. However, these techniques require proper calibration to accurately perform such indirect evaluation. Improper calibration standards used in this calibration process could naturally result in a reduction in the accuracy and thus the performance of dielectric characterization using microwaves. Self-calibrating microwave techniques can reduce the effects of imprecise standards and thus improve the performance of microwave measurements by bypassing the requirement of calibration standards. In this study, we develop a self-calibrating microwave measurement technique to determine the relative permittivity of honey samples and implement binary mixing models to predict adulteration levels of water-adulterated honey. From this implementation, it is observed that the parallel-capacitance mixing model could efficiently be applied to determine the concentration of water adulteration by examining the differences between absolute values of the real parts of the measured and predicted complex permittivities of adulterated honey.


  • Feasible Extraction Method for Electromagnetic Properties of Multilayer Metamaterials With Short-Circuit Termination

    by Ugur Cem Hasar, Gokhan Ozturk, Yunus Kaya, Musa Bute, Muharrem Karaaslan, Joaquim J. Barroso, Omar M. Ramahi, Mehmet Ertugrul

    An extraction technique is proposed for electromagnetic characterization of metal-backed multilayer metamaterial (MM) structures demonstrating reflection-asymmetric property. It uses recursive scattering parameters for direct and reversed configurations of a multilayer structure. Its algorithm was validated by comparing the extracted electromagnetic properties of multilayer structures composed of different MM unit cells with those determined by one-layer-only S-parameter methods. Two-layer and three-layer multilayer structures composed of MM slabs with C-shaped and Ω-shaped rings and a FR4 material were fabricated and measured for experimental validation. A sensitivity analysis was also conducted to quantitatively evaluate the performance of our method against a small air gap between the multilayer structures and the short-circuit termination and between adjacent MM slabs within these structures. Strong agreement was observed between the resulted obtained using our method and measurements.