VSVolodymyr Stefanov

Volodymyr Stefanov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Volodymyr Stefanov has a total of 60 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    EFFECT OF FATTY ACID CONCENTRATION IN THE WORKING FLUID OF MACHINE HYDRAULIC DRIVES ON BOUNDARY LUBRICATING FILM FORMATION

    by V. Stefanov, M. Voronin

    An analysis of research regarding the effect of fatty acid additives on enhancing the anti-wear properties of working fluids was conducted. The characteristics and molecular state of the additive within the oil were identified as factors influencing the formation of a boundary lubricating film on friction surfaces. A method for intensifying additive adsorption by subjecting the working fluid to an electric field was proposed. A methodology was developed to experimentally investigate how the concentration of surfactant molecules – specifically the fatty acids under study – affects the formation of a lubricating layer on the friction surfaces of machinery hydraulic drives. Experimental studies were carried out to examine the effect of stearic and oleic acid concentrations on changes in boundary lubricating film thickness when the working fluid undergoes electrostatic treatment. A non-linear relationship between lubricating film thickness and additive concentration was established, and the optimal concentrations of stearic and oleic acids – yielding the maximum boundary lubricating film thickness – were determined.

  • Open Access

    IMPROVEMENT OF THE MATHEMATICAL MODEL FOR DETERMINING THE SERVICE LIFE OF LOCOMOTIVE MOTOR-AXLE BEARINGS WITH HYDRAULIC LUBRICATION SYSTEM

    by Volodymyr Stefanov, Andrii Savchenko

    This paper presents an improved mathematical model for determining the service life of locomotive axle journal bearings operating under non-stationary loading and lubrication conditions. Unlike conventional stationary approaches, the proposed model accounts for variable speed regimes, fluctuating contact pressures, changes in lubrication modes, and temperaturedependent lubricant properties.A generalized wear intensity model has been developed by combining a modified Archard-type relationship for boundary lubrication with a viscosity-dependent expression for hydrodynamic lubrication. The overall wear rate is defined as a weighted function of boundary and hydrodynamic regimes, where the weighting coefficient reflects the proportion of boundary friction occurring under specific operating conditions. This approach allows a more realistic description of wear evolution in locomotive axle bearings, which operate under alternating traction, transient, and steady-speed regimes.The study demonstrates that wear intensity exhibits a pronounced dependence on locomotive speed. The most severe wear conditions occur in the low-speed range (10–20 km/h), where boundary and mixed lubrication dominate. In contrast, at higher speeds (40–70 km/h), stabilization of the hydrodynamic lubrication regime significantly reduces wear intensity—by more than an order of magnitude compared to low-speed operation. It has been established that increasing the diametral clearance shifts operating conditions toward more severe friction regimes, leading to higher friction coefficients and accelerated wear. Optimal clearance values promote stable hydrodynamic film formation and improved load distribution. An analytical expression for bearing life based on sliding distance has been derived, linking permissible wear, sliding velocity, and total wear intensity. The proposed model enables quantitative assessment of the influence of operating speed, material properties, lubricant viscosity, additive concentration, and temperature on bearing durability. The developed methodology provides a scientific basis for predicting overhaul intervals of locomotives, optimizing lubrication systems, and selecting advanced lubricants with enhanced tribological performance.

  • МАТЕМАТИЧНА МОДЕЛЬ РОЗРАХУНКУ ТОВЩИНИ ГРАНИЧНОЇ МАСТИЛЬНОЇ ПЛІВКИ НА ПОВЕРХНЯХ ТЕРТЯ ГІДЛАВЛІЧНИХ МАШИН

    by С. В. Воронін, В. О. Стефанов

    Анотація. На основі законів електростатики та сучасних уявлень про електронну будову реальної металевої поверхні отримана математична модель для визначення максимальної відстані полярно-активної молекули від металевої поверхні, на якій виконується умова фізичної адсорбції цієї молекули. Модель враховує щільність та розподіл поверхневого заряду на субмікроскопічній сходинці «желе», величину дипольного моменту молекули та енергію її теплових коливань. Математична модель побудована з умови рівноваги процесів адсорбції та десорбції полярно-активних молекул. Виконання цієї умови встановлює максимальну відстань, яку можна інтерпретувати як максимальну товщину граничної мастильної плівки на поверхнях тертя гідравлічних машин. По розробленій моделі проведено розрахунки товщини мастильної плівки залежно від температури та виконано порівняння з експериментальними значеннями.

  • Open Access

    CALCULATION OF LUBRICANT SUPPLY TO THE MOTOR-AXLE BEARING OF A LOCOMOTIVE USING FORCED LUBRICATION

    by Володимир Олександрович Стефанов, Андрій Дмитрович Савченко

    The motor-axle bearing (MAB) of a locomotive traction motor represents one of the most critically loaded elements of the locomotive’s running gear, experiencing substantial dynamic loads throughout its operational life. Continuous exposure to these loads, particularly under varying locomotive speeds and operational conditions, imposes strict requirements on the effectiveness of the bearing’s lubrication system. Insufficient supply of lubricant has been identified as a major factor leading to accelerated wear of the bearing liners, a significant decrease in service life, and, consequently, premature bearing failure. Such failures compromise the reliability and operational capability of the locomotive as a whole, resulting in increased maintenance costs and potential operational downtime.This article addresses the problem of determining the optimal axial oil supply rate to motoraxle bearings in the traction motors of the 2TE116 diesel locomotive. A comprehensive mathematical model has been developed, which allows for the calculation of the required oil flow rate based on critical operational parameters, including locomotive speed, load variations, and ambient conditions, as well as considering the structural characteristics of the lubrication system. The model integrates key tribological principles, including hydrodynamic lubrication theory and bearing surface protection under real-world operational conditions.The study presents detailed calculation results, highlighting the relationships between operational modes and lubricant consumption rates. The findings demonstrate the importance of adjusting the lubrication supply dynamically in accordance with the locomotive’s operational profile. Implementation of the proposed methodology could lead to significant improvements in lubrication efficiency, reduction in bearing wear, and substantial extension of the motor-axle bearing service life. Furthermore, the outcomes of this research provide practical recommendations for optimizing existing lubrication systems and inform the design of more reliable bearing assemblies for future locomotive models.

  • Open Access

    ОПТИМІЗАЦІЯ РОБОТИ БАШТОВОГО КРАНА ЗА ДОПОМОГОЮ АВТОМАТИЗОВАНИХ СИСТЕМ УПРАВЛІННЯ

    by Володимир Стефанов, Ігор Дзержинський

    У роботі розглядається процес оптимізації функціонування баштового крана через впровадження автоматизованих систем управління. Проаналізовано основні переваги автоматизації, серед яких підвищення ефективності роботи крана, зниження ризиків людських помилок та зменшення витрат на обслуговування. Особливу увагу приділено сучасним технологіям, що дозволяють здійснювати точне управління процесами підйому та переміщення вантажів, а також інтеграції систем моніторингу і діагностики стану обладнання. Впровадження таких систем дозволяє значно покращити продуктивність роботи, забезпечити безпеку та знизити вплив людського фактора на роботу баштового крана. У роботі розглянуто вплив людського фактора на працездатність баштових кранів та можливість його зменшення через впровадження систем машинного зору. Проаналізовано ризики, пов'язані з людськими помилками, та їхній вплив на безпеку й продуктивність робіт. Окреслено принципи роботи систем машинного зору, їхні технічні можливості та переваги в автоматизації керування краном, зокрема для моніторингу робочої зони, визначення траєкторій руху вантажів і мінімізації ризику зіткнень. Розглянуто методи реалізації цих систем за допомогою камер, сенсорів та алгоритмів глибокого навчання. Досліджено ефективність алгоритмів, таких як згорткові нейронні мережі (CNN), і технічні виклики, що виникають при інтеграції цих технологій. Результати показали, що системи машинного зору підвищують безпеку, знижують навантаження на оператора та покращують ефективність експлуатації кранів. Впровадження систем машинного зору є важливим кроком до покращення безпеки, підвищення ефективності та зниження навантаження на операторів при експлуатації баштових кранів. Крім того, такі системи можуть визначати безпечні траєкторії для переміщення вантажів, мінімізуючи можливість зіткнень або пошкоджень. Ключові слова: баштовий кран, аварії, людський фактор, моніторинг, машинне бачення, сонливість, штучний інтелект, система безпеки.

  • Open Access

    EXPLORING THE STABILITY OF TOWER CRANES AND METHODS FOR IMPROVING THEIR OPERATIONAL SAFETY

    by І. Dzerzhynskiy, V. Stefanov

    This article delves into the critical issue of stability in different types of tower cranes, specifically comparing those with rotating (slewing) towers and those with non-rotating (top-slewing) towers. It explores various methods to enhance the operational safety of these essential construction machines. Tower cranes, while indispensable in modern construction and heavy industries, are inherently susceptible to stability-related accidents due to their height, slenderness, and the dynamic nature of the loads they handle. This study comprehensively analyzes the influence of structural characteristics, operational loads, and a range of external forces on crane stability. The research explores factors such as wind loading, dynamic forces generated during operation (e.g., load swing, sudden stops), and even more extreme events like impact waves. The research methodology combines a thorough review of existing literature, standards, and regulations with advanced computational analysis and experimental validation. The literature review encompasses relevant standards, such as the EN 13001 series, Ukrainian national regulations, and research publications focusing on crane stability, dynamic load analysis, and safety improvement methods. This review identifies gaps in traditional calculation methods, particularly their limitations in accurately representing complex load combinations and the behavior of non-standard or modified crane configurations. To overcome these limitations, the study leverages 3D modeling and finite element analysis using industry-standard software. Detailed models of both rotating and non-rotating tower cranes are developed, allowing for a precise simulation of stress distributions, deformation patterns, and potential failure points under various loading scenarios. These models incorporate the specific geometric parameters, material properties, and connection details of the cranes. The finite element analysis approach allows for a significantly more accurate assessment of stress concentrations, particularly in critical areas such as the tower-to-base connection, compared to traditional methods of structural mechanics. The comparative analysis highlights key differences in the stability characteristics of the two crane types. The location of the center of gravity, the response to dynamic loads (especially during slewing operations), and the impact of wind forces are meticulously examined. The findings indicate that cranes with rotating towers exhibit a larger degree of load sway and potentially greater vulnerability to certain types of dynamic instability. To validate the theoretical and computational findings, experimental studies are conducted using a scaled-down (1:20) laboratory model of a KB-403 tower crane. A custom-designed computer program controls the model's movements, allowing for the precise simulation of various operational scenarios and the collection of empirical data on crane behavior. Based on the combined theoretical, computational, and experimental results, the research proposes a novel design concept: a tower crane with a load-compensating mechanism using a movable counterweight. The study outlines an algorithm for controlling the position of this counterweight, dynamically adjusting it based on real-time sensor data (load weight, jib extension, wind speed and direction, tower inclination, and stress levels in critical components). Furthermore, the article explores the potential integration of artificial intelligence and machine learning techniques to create an adaptive control system for enhanced stability. This system would utilize data from a network of sensors to predict and mitigate potential instability issues in real-time. The importance of ongoing data collection and continuous refinement of the artificial intelligence models is emphasized to ensure long-term reliability and effectiveness.

  • Open Access

    SYSTEM ANALYSIS OF TOWER CRANE ACCIDENTS AND INNOVATIVE METHODS OF THEIR PREVENTION

    by Volodymyr Stefanov, Ihor Dzerzhynskiy

    This article presents a comprehensive investigation into the causes of tower crane accidents, a critical concern considering their vital role in modern high-rise construction and the associated high risks. The analysis encompasses technical, organizational, and environmental factors that compromise crane stability. These include inherent design vulnerabilities (a high center of gravity coupled with a limited support base), dynamic external loads such as wind and seismic events, and the pervasive influence of human error across all stages of a crane's operational life.The study reveals that accidents involving tower crane overturning or structural collapse, often precipitated by hard-to-detect fatigue cracks, represent up to 40% of all lifting crane incidents. Such failures pose substantial threats not only to on-site personnel but also to adjacent structures and the general public. The growing density of urban construction, coupled with challenges like fluctuating operational conditions and inadequate operator training, amplifies these inherent risks. A global increase in tower crane utilization is unfortunately accompanied by a corresponding rise in accident frequency, highlighting deficiencies in current safety protocols, even on technologically advanced "smart" building sites.The research underscores the imperative for proactive, holistic risk management and enhanced safety systems. It places particular emphasis on harnessing cutting-edge technologies, most notably artificial intelligence and neural networks, to create automated monitoring and control mechanisms. These systems are designed to bolster crane stability under unpredictable and dynamic loading, and facilitate the early detection of structural weaknesses. The proposed approach uses sensors and machine learning algorithms for real-time data analysis and predictive control, representing a significant advancement over conventional, often reactive, safety methodologies. The findings offer practical benefits for minimizing construction accidents, improving the operational reliability of tower cranes in demanding environments, and promoting higher global standards of construction safety.

  • Open Access

    STABILITY MANAGEMENT OF A TOWER CRANE USING ARTIFICIAL INTELLIGENCE

    by Volodymyr Stefanov, Ihor Dzerzhynskiy

    Tower cranes remain an irreplaceable tool in the construction industry. The market for tower cranes is expected to grow to over $3 billion by 2025. Hundreds of thousands of tower cranes are in operation worldwide, with over 5,000 in Ukraine. Most of these cranes have reached the end of their service life. The limited size of construction sites forces the use of tower cranes with a small support base, which are prone to tipping over during assembly and operation. Accidents on tower cranes occur regularly, with an average of 2 per year in the United States. About half of all tower crane accidents are related to tipping over. The main causes of tower crane accidents are technical reasons (failure of technical devices and safety devices), organizational reasons (violation of technological and labor discipline), and external influences (wind load). This paper presents a system for ensuring the stability of a tower crane using artificial intelligence methods. The system includes sensors for collecting data on wind parameters and crane parameters, a controller with a neural network model for predicting wind parameters, and an algorithm for controlling crane mechanisms. The system is designed to ensure the stability of the crane in working condition. The results of the study showed that the proposed system can effectively ensure the stability of the tower crane in working condition. The system can predict dangerous wind gusts and take appropriate measures to prevent tipping over. The use of this system can significantly reduce the number of accidents on tower cranes.


  • Open Access

    IMPACT OF LOADS ON LOCOMOTIVE MOTOR AXLE BEARINGS ON THE CONDITIONS OF FORMATION OF OIL FILM ON FRICTION SURFACES

    by Serhii Voronin, Володимир Олександрович Стефанов, Сергій Володимирович Комар, Andrii Savchenko, Oleksandr Hubin, Олександр Олександрович Губін

    During the active operation of locomotives, a significant portion of failures (up to 20 %) is attributed to the malfunction of motor-axial bearings. This is due to the imperfection of the lubrication system of the motor-axial bearings, the proper functioning of which largely depends on various factors such as climatic conditions, the level of wear of lubricating oil, and lubrication devices, among others. There is a need to improve the existing lubrication systems for motor-axial sliding bearings. One of the methods to address this issue involves examining the factors influencing the lubrication process of the friction surfaces of motor-axial bearings and the conditions of lubricant material supply. The article provides calculations of the loading forces on the motor-axial bearings, their action vectors, and analyzes the impact of these parameters on the ability to form an oil film on the friction surfaces of motor-axial bearings. To determine the magnitude of the load, technical specifications of the locomotive were used, and the relationship between power usage and locomotive speed was analyzed. The study involved an analysis of recent publications regarding the generation of contact pressure force between the contact surfaces of friction pairs, the magnitude of which exceeds permissible limits, considered one of the primary factors leading to bearing failure. Additionally, the existing bearing lubrication system used on the locomotive was analyzed, its shortcomings were identified, and methods for addressing these issues were discussed. The calculations were performed for the 2TE116 locomotive with traction electric motors ED-118B, based on the operational characteristics of the locomotive in the speed range of 0-80 km/h.

  • Open Access

    METHODOLOGY AND EXAMPLE OF CALCULATING THE RATIONAL RESOURCE OF AXIAL-PISTON HYDRAULIC MACHINES OF MOBILE EQUIPMENT

    by Serhii Voronin, Володимир Олександрович Стефанов, Roman Vasianovych, Taras Tryfonov, Sergii Pivovarov, Сергій Володимирович Воронін, Тарас Вікторович Трифонов

    The article analyzes approaches for creating models for optimizing the durability of mobile machine units. On the basis of the selected model, in which the target function is the total specific costs of purchasing the machine and the costs of maintaining its working condition, a method of calculating the rational resource of axial-plunger hydraulic machines has been developed for the condition when the resource of the hydraulic machine is limited by the resource of only its plunger pairs. The methodology, built on the basis of the chosen model for optimizing the durability of simple technical systems, takes into account the patterns of wear of plunger pairs under certain operating conditions, and also takes into account the proposed dependencies for calculating their total wear limit. The methodology consists of five consecutive operations, namely: determining the total marginal wear; obtaining experimental patterns of wear of plunger pairs over time in the form of regression equations; calculation of the number and periodicity of technical maintenance of the hydraulic machine for the inter-repair cycle; calculation of the rational resource of the hydraulic machine.The results of the comparative calculation of the rational resource of the adjustable axial-plunger pump 321.224 of the hydraulic system of the single-bucket excavator EO-3323 according to the developed method are also given.The total marginal wear of the pump was determined according to the criterion of reducing its efficiency, namely from the condition of a drop due to the wear of its volume coefficient of useful action by 30 %.To obtain the patterns of wear of the pump's plunger pairs, the results of previous operational tests of the pump were used for two variants of its lubrication: lubrication with ordinary hydraulic oil and lubrication with oil whose anti-wear properties are activated by an external electric field. Specific costs for the purchase of the pump, which are included in the durability optimization model in the form of depreciation deductions, were calculated for the inter-repair cycle. The specific costs of maintaining the working condition of the pump were equal to the costs of its maintenance, during which hydraulic oil and filters are replaced, that is, the pattern of wear of plunger pairs is returned to the starting point.