Puthusserickal Abdulrahiman Hassan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Puthusserickal Abdulrahiman Hassan has a total of 219 co-authors. Here are the top co-authors by number of shared publications:
- Kanhu Charan Barick
Chemistry Division Bhabha Atomic Research Centre Mumbai India
30 shared publications Bijaideep Dutta
Chemistry Division Bhabha Atomic Research Centre Trombay Mumbai 400085 INDIA
18 shared publications- Santosh L. Gawali
Nanotherapeutics and Biosensors Section, Chemistry Division, Bhabha Atomic Research Centre Trombay, Mumbai 400085, India
13 shared publications Neena G. Shetake
Homi Bhabha National Institute
10 shared publicationsV. K. Aswal
Solid State Physics Division, Bhabha Atomic Research Centre, Mumbai-400085, India
8 shared publicationsGunjan Verma
Bhabha Atomic Research Centre
7 shared publications
Latest Publications
- 6 February 2026
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 50 (10) , 4504-4519
Synthesis and self-assembly of mPEG–palmitic acid and mPEG–stearic acid conjugates for pH-responsive delivery and release of anticancer therapeutics
Stable and biocompatible micellar formulations of amphiphilic poly(ethylene glycol)–stearic acid and palmitic acid conjugates have been designed for efficient loading and effective pH environment responsive release of doxorubicin.
- 6 February 2026
- Published by Royal Society of Chemistry (RSC) in New Journal of Chemistry
- Vol. 50 (10) , 4504-4519
Synthesis and self-assembly of mPEG–palmitic acid and mPEG–stearic acid conjugates for pH-responsive delivery and release of anticancer therapeutics
Stable and biocompatible micellar formulations of amphiphilic poly(ethylene glycol)–stearic acid and palmitic acid conjugates have been designed for efficient loading and effective pH environment responsive release of doxorubicin.
- 6 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (10) , 9042-9057
Clathrin-Mediated Endocytosis for Enhanced Apoptosis Induction and Cellular Imaging in Triple-Negative Breast Cancer by Casein-Protected Blue-Emissive Carbon Dots
The development of multifunctional nanoplatforms capable of drug delivery and real-time cellular imaging remains a key challenge in cancer theranostics. Herein, we report the development of a casein-protected maleic acid-derived nitrogen-doped carbon dot-based luminescent nanoplatform (MNCD@Cas NPs) for efficient delivery of the anticancer drug doxorubicin hydrochloride (DOX) to triple-negative breast cancer cells. Synthesized via a facile two-step method, the MNCD@Cas NPs exhibit bright blue fluorescence (λem = 390 nm), high water dispersibility, excellent colloidal stability, and substantial DOX loading capacity (∼84%) driven by electrostatic interactions. The drug-loaded MNCD@Cas NPs (DOX@MNCD@Cas NPs) exhibited clathrin-mediated endocytosis in MDA-MB-231 cells and pH-dependent drug release at higher levels under mild acidic conditions. Clathrin-mediated endocytosis was validated by confocal microscopic imaging of early endosomal antigen 1 expression, which showed a significant reduction in red fluorescent vesicles upon pretreatment with monodansyl cadaverine, a clathrin-mediated endocytosis inhibitor, compared to nystatin, an inhibitor of caveolin-mediated uptake. Further, the flow-cytometry-based quantification of DOX fluorescence confirmed the reduced intracellular uptake in MDC-pretreated cells, supporting the predominant involvement of clathrin-mediated internalization. The system induced pronounced cell cycle arrest at sub-G1 and G2-M phases, indicating apoptosis induction, as evident by confocal microscopy imaging and flow cytometric analysis. The intrinsic fluorescence of a biocompatible carbon dot enables real-time cellular imaging without using any external dye. This dual functionality such as anticancer drug delivery and imaging capability positions DOX-loaded MNCD@Cas NPs as a highly promising nanotheranostic platform.
- 6 September 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (10) , 9042-9057
Clathrin-Mediated Endocytosis for Enhanced Apoptosis Induction and Cellular Imaging in Triple-Negative Breast Cancer by Casein-Protected Blue-Emissive Carbon Dots
The development of multifunctional nanoplatforms capable of drug delivery and real-time cellular imaging remains a key challenge in cancer theranostics. Herein, we report the development of a casein-protected maleic acid-derived nitrogen-doped carbon dot-based luminescent nanoplatform (MNCD@Cas NPs) for efficient delivery of the anticancer drug doxorubicin hydrochloride (DOX) to triple-negative breast cancer cells. Synthesized via a facile two-step method, the MNCD@Cas NPs exhibit bright blue fluorescence (λem = 390 nm), high water dispersibility, excellent colloidal stability, and substantial DOX loading capacity (∼84%) driven by electrostatic interactions. The drug-loaded MNCD@Cas NPs (DOX@MNCD@Cas NPs) exhibited clathrin-mediated endocytosis in MDA-MB-231 cells and pH-dependent drug release at higher levels under mild acidic conditions. Clathrin-mediated endocytosis was validated by confocal microscopic imaging of early endosomal antigen 1 expression, which showed a significant reduction in red fluorescent vesicles upon pretreatment with monodansyl cadaverine, a clathrin-mediated endocytosis inhibitor, compared to nystatin, an inhibitor of caveolin-mediated uptake. Further, the flow-cytometry-based quantification of DOX fluorescence confirmed the reduced intracellular uptake in MDC-pretreated cells, supporting the predominant involvement of clathrin-mediated internalization. The system induced pronounced cell cycle arrest at sub-G1 and G2-M phases, indicating apoptosis induction, as evident by confocal microscopy imaging and flow cytometric analysis. The intrinsic fluorescence of a biocompatible carbon dot enables real-time cellular imaging without using any external dye. This dual functionality such as anticancer drug delivery and imaging capability positions DOX-loaded MNCD@Cas NPs as a highly promising nanotheranostic platform.
- Open Access
- 3 July 2025
- Published by Wiley in Chemphyschem
- Vol. 26 (16) , e2500016
Development of Water‐Dispersible CuS Nanoparticles for Chemo–Photothermal Therapy and Photoacoustic Application
Photothermal therapy (PTT) is a promising treatment option for cancer. However, biocompatibility, water dispersibility, and good photoresponsiveness are necessary for photothermal agents to be used in PTT. Herein, a soft chemical approach is reported for the design and development of phosphorylethanolamine‐functionalized CuS nanoparticles (PEA‐CuS NPs) using phosphorylethanolamine (PEA) as a surface passivation agent for combinatorial chemo–photothermal therapy. X‐ray diffraction and transmission electron microscopy analyses proved the successful formation of the green covellite CuS phase with an average particle size of 13 nm, while Fourier transform infrared spectroscopy and light scattering measurements demonstrated their surface functionalization with the PEA ligand. The PEA‐CuS NPs have exhibited good photothermal heating efficacy upon irradiation of 980 nm laser light. Moreover, the in vitro studies have shown substantial cellular uptake of PEA‐CuS NPs in MCF‐7 cell lines and their dose‐dependent cytotoxicity (83.3 and 65.4% cell‐killing efficacy by 100 and 50 μg mL−1 of PEA‐CuS NPs, respectively) upon 980 nm laser irradiation (0.65 W power). The developed PEA‐CuS NPs have also demonstrated very high acoustic signal under 690 and 530 nm laser light irradiation. Thus, these water‐dispersible PEA‐CuS NPs can be served as a promising candidate for image‐guided combinatorial therapy involving chemotherapy and PTT.
- 3 July 2025
- Published by Wiley in Chemphyschem
- Vol. 26 (16) , e2500016
Open AccessDevelopment of Water‐Dispersible CuS Nanoparticles for Chemo–Photothermal Therapy and Photoacoustic Application
Photothermal therapy (PTT) is a promising treatment option for cancer. However, biocompatibility, water dispersibility, and good photoresponsiveness are necessary for photothermal agents to be used in PTT. Herein, a soft chemical approach is reported for the design and development of phosphorylethanolamine‐functionalized CuS nanoparticles (PEA‐CuS NPs) using phosphorylethanolamine (PEA) as a surface passivation agent for combinatorial chemo–photothermal therapy. X‐ray diffraction and transmission electron microscopy analyses proved the successful formation of the green covellite CuS phase with an average particle size of 13 nm, while Fourier transform infrared spectroscopy and light scattering measurements demonstrated their surface functionalization with the PEA ligand. The PEA‐CuS NPs have exhibited good photothermal heating efficacy upon irradiation of 980 nm laser light. Moreover, the in vitro studies have shown substantial cellular uptake of PEA‐CuS NPs in MCF‐7 cell lines and their dose‐dependent cytotoxicity (83.3 and 65.4% cell‐killing efficacy by 100 and 50 μg mL−1 of PEA‐CuS NPs, respectively) upon 980 nm laser irradiation (0.65 W power). The developed PEA‐CuS NPs have also demonstrated very high acoustic signal under 690 and 530 nm laser light irradiation. Thus, these water‐dispersible PEA‐CuS NPs can be served as a promising candidate for image‐guided combinatorial therapy involving chemotherapy and PTT.
- 5 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (2) , 1418-1436
Amphiphilic Poly(ethylene glycol)-Cholesterol Conjugate: Stable Micellar Formulation for Efficient Loading and Effective Intracellular Delivery of Curcumin
A biodegradable and biocompatible micellar-based drug delivery system was developed using amphiphilic methoxy-poly(ethylene glycol)-cholesterol (C1) and poly(ethylene glycol)-S-S-cholesterol (C2) conjugates and applied to the tumoral release of the water-insoluble drug curcumin. These synthesized surfactants C1 and C2 were found to form stable micelles (CMC ∼ 6 μM) and an average hydrodynamic size of around 20-25 nm. The curcumin-encapsulated C1 micelle was formulated by a solvent evaporation method. A very high drug encapsulation efficiency (EE) of ∼88% and a drug loading (DL) capacity of ∼9% were determined for both the micelles. From the reduced rate of curcumin degradation and differential scanning calorimetry (DSC) analysis, the stability of the curcumin-loaded C1 micelle was found to be higher than that of the unloaded micelle, which confirmed a more compact structural arrangement in the presence of hydrophobic curcumin. A pH-sensitive release of curcumin (faster release with decrease in pH) was observed for the curcumin-loaded C1 micelle, attributed to the diffusion and relaxation/erosion of micellar aggregates. To achieve reduction environment-sensitive drug release, a disulfide (S-S) chemical linkage-incorporated mPEG-cholesterol conjugate (C2) was synthesized, which was found to show glutathione-responsive faster release of curcumin. The in vitro experiments carried out in SCC9 oral cancer cell lines showed that the blank C1 and C2 micelles were noncytotoxic at lower concentrations (in vitro cytotoxicity was observed for curcumin-loaded micelles compared to that of curcumin itself, demonstrating a better cell penetration efficacy of the micelle. These results were further supplemented by the in vivo anticancer analysis of the curcumin-loaded C1 and C2 micellar formulations using the mice xenograft model. Notably, curcumin-loaded C2 micelles showed a significantly stronger apoptotic effect in xenograft mice compared to curcumin-loaded C1 micelles, indicating the GSH environment-sensitive drug release and improved bioavailability. In conclusion, the mPEG-cholesterol C1 and C2 micellar system with the advantages of small size, high encapsulation efficiency, high drug loading, simple preparing technique, biocompatibility, and good in vitro and in vivo performance may have the potential to be used as a drug carrier for sustained and stimuli-responsive release of the hydrophobic drug curcumin.
- 5 February 2025
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 8 (2) , 1418-1436
Amphiphilic Poly(ethylene glycol)-Cholesterol Conjugate: Stable Micellar Formulation for Efficient Loading and Effective Intracellular Delivery of Curcumin
A biodegradable and biocompatible micellar-based drug delivery system was developed using amphiphilic methoxy-poly(ethylene glycol)-cholesterol (C1) and poly(ethylene glycol)-S-S-cholesterol (C2) conjugates and applied to the tumoral release of the water-insoluble drug curcumin. These synthesized surfactants C1 and C2 were found to form stable micelles (CMC ∼ 6 μM) and an average hydrodynamic size of around 20-25 nm. The curcumin-encapsulated C1 micelle was formulated by a solvent evaporation method. A very high drug encapsulation efficiency (EE) of ∼88% and a drug loading (DL) capacity of ∼9% were determined for both the micelles. From the reduced rate of curcumin degradation and differential scanning calorimetry (DSC) analysis, the stability of the curcumin-loaded C1 micelle was found to be higher than that of the unloaded micelle, which confirmed a more compact structural arrangement in the presence of hydrophobic curcumin. A pH-sensitive release of curcumin (faster release with decrease in pH) was observed for the curcumin-loaded C1 micelle, attributed to the diffusion and relaxation/erosion of micellar aggregates. To achieve reduction environment-sensitive drug release, a disulfide (S-S) chemical linkage-incorporated mPEG-cholesterol conjugate (C2) was synthesized, which was found to show glutathione-responsive faster release of curcumin. The in vitro experiments carried out in SCC9 oral cancer cell lines showed that the blank C1 and C2 micelles were noncytotoxic at lower concentrations (in vitro cytotoxicity was observed for curcumin-loaded micelles compared to that of curcumin itself, demonstrating a better cell penetration efficacy of the micelle. These results were further supplemented by the in vivo anticancer analysis of the curcumin-loaded C1 and C2 micellar formulations using the mice xenograft model. Notably, curcumin-loaded C2 micelles showed a significantly stronger apoptotic effect in xenograft mice compared to curcumin-loaded C1 micelles, indicating the GSH environment-sensitive drug release and improved bioavailability. In conclusion, the mPEG-cholesterol C1 and C2 micellar system with the advantages of small size, high encapsulation efficiency, high drug loading, simple preparing technique, biocompatibility, and good in vitro and in vivo performance may have the potential to be used as a drug carrier for sustained and stimuli-responsive release of the hydrophobic drug curcumin.
- 23 December 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (8) , 4502-4523
Fluorescence tunable carbon dots for in vitro nuclear dynamics and gastrointestinal imaging in live zebrafish and their in vivo toxicity evaluation by cardio-craniofacial disfunction assessment
Synthesis of high-performance N-doped carbon dots (TNCDs) with an enhanced quantum yield for dual imaging and their in vivo toxicity evaluation in a zebrafish model.
- 23 December 2024
- Published by Royal Society of Chemistry (RSC) in Nanoscale
- Vol. 17 (8) , 4502-4523
Fluorescence tunable carbon dots for in vitro nuclear dynamics and gastrointestinal imaging in live zebrafish and their in vivo toxicity evaluation by cardio-craniofacial disfunction assessment
Synthesis of high-performance N-doped carbon dots (TNCDs) with an enhanced quantum yield for dual imaging and their in vivo toxicity evaluation in a zebrafish model.
- 17 December 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (2) , 1171-1186
Self-assembly of cationic surfactant in choline chloride-based deep eutectic solvents: structural solvation and dynamics
Deep eutectic solvents (DESs) have gained popularity in various applications due to their improved environmental sustainability and biodegradability. For the present study, several polyhydric alcohols, including ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG), and glycerol (Gly), have been used as hydrogen bond donors (HBDs) and choline chloride (ChCl) as a hydrogen bond acceptor (HBA) in a fixed molar ratio to form a homogenous and stable DES. Controlled water mixing into such neat DESs has always been thought to be a quick and efficient method to tune the chemical and thermodynamic properties of DESs. The structural solvation and dynamics of the prepared DESs with the inclusion of water vary from low to high water concentrations that have been examined employing Fourier transform infrared (FT-IR), and proton nuclear magnetic resonance (1H-NMR) spectroscopy. Herein, the micellization behavior of a cationic surfactant, dodecyltrimethylammonium bromide (DTAB), in neat DESs and DES–water mixtures has been demonstrated by using tensiometry, dynamic light scattering (DLS), and small-angle X-ray scattering (SAXS) techniques. Furthermore, it has been observed that DESs exhibit an ample thermodynamic driving force for creating micelles, since they contain an H-bonded nanostructure. However, such self-assembly appears to be very much dependent on DESs, the amount of water, and the surfactant used. A computational simulation approach using a semiempirical method is put forth employing the Gaussian 09 W calculation window in the Gauss View 5.0.9 software package. In addition, this study includes the determination of several optimized descriptors that intend to offer an in-depth examination of the surfactant–DES interactions.
- 17 December 2024
- Published by Royal Society of Chemistry (RSC) in Physical Chemistry Chemical Physics
- Vol. 27 (2) , 1171-1186
Self-assembly of cationic surfactant in choline chloride-based deep eutectic solvents: structural solvation and dynamics
Deep eutectic solvents (DESs) have gained popularity in various applications due to their improved environmental sustainability and biodegradability. For the present study, several polyhydric alcohols, including ethylene glycol (EG), diethylene glycol (DEG), triethylene glycol (TEG), and glycerol (Gly), have been used as hydrogen bond donors (HBDs) and choline chloride (ChCl) as a hydrogen bond acceptor (HBA) in a fixed molar ratio to form a homogenous and stable DES. Controlled water mixing into such neat DESs has always been thought to be a quick and efficient method to tune the chemical and thermodynamic properties of DESs. The structural solvation and dynamics of the prepared DESs with the inclusion of water vary from low to high water concentrations that have been examined employing Fourier transform infrared (FT-IR), and proton nuclear magnetic resonance (1H-NMR) spectroscopy. Herein, the micellization behavior of a cationic surfactant, dodecyltrimethylammonium bromide (DTAB), in neat DESs and DES–water mixtures has been demonstrated by using tensiometry, dynamic light scattering (DLS), and small-angle X-ray scattering (SAXS) techniques. Furthermore, it has been observed that DESs exhibit an ample thermodynamic driving force for creating micelles, since they contain an H-bonded nanostructure. However, such self-assembly appears to be very much dependent on DESs, the amount of water, and the surfactant used. A computational simulation approach using a semiempirical method is put forth employing the Gaussian 09 W calculation window in the Gauss View 5.0.9 software package. In addition, this study includes the determination of several optimized descriptors that intend to offer an in-depth examination of the surfactant–DES interactions.
- 24 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 7 (11) , 7207-7218
Enhanced Singlet Oxygen Generation in Aggregates of Naphthalene-Fused BODIPY and Its Application in Photodynamic Therapy
Several reports are available on aggregation-induced emission and its applications in biomedical imaging and other material sciences. However, enhancement of singlet oxygen generation in nanoaggregates is rarely reported. Here, we report the synthesis of Naph-BODIPY Br2, which absorbs at 661 nm (monomer) with a high molar absorption coefficient. The presence of bromine promotes intersystem crossing, thereby enhancing the singlet oxygen quantum yield (ΦΔ ∼ 0.50 in methanol). In order to increase hydrophilicity, we developed Naph-BODIPY Br2 nanoaggregates (∼100 nm), which demonstrated aggregation-induced properties and exhibited a bathochromic shift with an absorption maximum at 757 nm. The bathochromic shift in the UV-vis spectra due to aggregation is corroborated by TD-DFT analysis. The computational data also confirm the presence of a low-lying triplet state, which enhances the generation of singlet oxygen, making it effective for photodynamic therapy. These aggregates showed excellent singlet oxygen generation in aqueous media, compared to their monomeric form and standard methylene blue. Their hydrophilic nature and high singlet oxygen generation enabled significant phototoxicity against human carcinoma cells with IC50 values of 4.06 ± 0.01 and 4.09 ± 0.1 μM, respectively, for MCF-7 and A549 cells upon 5 min exposure to light. Moreover, their phototoxicity further increases with an increasing exposure time of light for both cell lines. Notably, Naph-BODIPY Br2 nanoaggregates exhibited nearly zero dark cell toxicity and effectively induced apoptosis in cancer cells upon light activation, highlighting their potential as powerful photosensitizers for photodynamic cancer therapy.
- 24 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 7 (11) , 7207-7218
Enhanced Singlet Oxygen Generation in Aggregates of Naphthalene-Fused BODIPY and Its Application in Photodynamic Therapy
Several reports are available on aggregation-induced emission and its applications in biomedical imaging and other material sciences. However, enhancement of singlet oxygen generation in nanoaggregates is rarely reported. Here, we report the synthesis of Naph-BODIPY Br2, which absorbs at 661 nm (monomer) with a high molar absorption coefficient. The presence of bromine promotes intersystem crossing, thereby enhancing the singlet oxygen quantum yield (ΦΔ ∼ 0.50 in methanol). In order to increase hydrophilicity, we developed Naph-BODIPY Br2 nanoaggregates (∼100 nm), which demonstrated aggregation-induced properties and exhibited a bathochromic shift with an absorption maximum at 757 nm. The bathochromic shift in the UV-vis spectra due to aggregation is corroborated by TD-DFT analysis. The computational data also confirm the presence of a low-lying triplet state, which enhances the generation of singlet oxygen, making it effective for photodynamic therapy. These aggregates showed excellent singlet oxygen generation in aqueous media, compared to their monomeric form and standard methylene blue. Their hydrophilic nature and high singlet oxygen generation enabled significant phototoxicity against human carcinoma cells with IC50 values of 4.06 ± 0.01 and 4.09 ± 0.1 μM, respectively, for MCF-7 and A549 cells upon 5 min exposure to light. Moreover, their phototoxicity further increases with an increasing exposure time of light for both cell lines. Notably, Naph-BODIPY Br2 nanoaggregates exhibited nearly zero dark cell toxicity and effectively induced apoptosis in cancer cells upon light activation, highlighting their potential as powerful photosensitizers for photodynamic cancer therapy.
- 3 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 12 (45) , 11759-11777
pH-Responsive magnetic nanocarriers for chelator-free bimodal (MRI/SPECT-CT) image-guided chemo-hyperthermia therapy in human breast carcinoma
Although chemotherapy with magnetic nanocarriers has witnessed significant advancement in the field of cancer treatment, multimodal diagnosis and combinatorial therapy using a single nanoplatform will have much better efficacy in achieving superior results. Herein, we constructed a smart theranostic system by combining pH-sensitive tartaric acid-stabilized Fe3O4 magnetic nanocarriers (TMNCs) with SPECT imaging and a chemotherapeutic agent for image-guided chemo-hyperthermia therapy. The carboxyl-enriched exteriors of TMNCs provided sites for the conjugation of a chemotherapeutic drug (doxorubicin hydrochloride, DOX) and radiolabeling (141Ce). The usage of 145.4 keV gamma rays made this platform an ideal choice for in vivo SPECT-CT imaging, showing the retention of the nanoformulation in the tumor site even after 28 days. Further, TMNCs showed a very high transverse relaxation rate (r2) of 171 mM−1 s−1, which is higher than that of clinically approved magnetic resonance imaging (MRI) contrast agents such as ferumoxtran (65 mM−1 s−1) and ferumoxides (120 mM−1 s−1). Further, the developed drug-loaded hybrid platform showed significantly higher cytotoxicity towards breast cancer cells, which was augmented by in vitro magnetic hyperthermia. Bright-field microscopy and cell cycle analysis suggested that cell death occurred through induction of G2-M arrest and subsequent apoptosis. These findings clearly suggest the potential of the developed hybrid nanoplatform for image-guided combination therapy.
- 3 October 2024
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry B
- Vol. 12 (45) , 11759-11777
pH-Responsive magnetic nanocarriers for chelator-free bimodal (MRI/SPECT-CT) image-guided chemo-hyperthermia therapy in human breast carcinoma
Although chemotherapy with magnetic nanocarriers has witnessed significant advancement in the field of cancer treatment, multimodal diagnosis and combinatorial therapy using a single nanoplatform will have much better efficacy in achieving superior results. Herein, we constructed a smart theranostic system by combining pH-sensitive tartaric acid-stabilized Fe3O4 magnetic nanocarriers (TMNCs) with SPECT imaging and a chemotherapeutic agent for image-guided chemo-hyperthermia therapy. The carboxyl-enriched exteriors of TMNCs provided sites for the conjugation of a chemotherapeutic drug (doxorubicin hydrochloride, DOX) and radiolabeling (141Ce). The usage of 145.4 keV gamma rays made this platform an ideal choice for in vivo SPECT-CT imaging, showing the retention of the nanoformulation in the tumor site even after 28 days. Further, TMNCs showed a very high transverse relaxation rate (r2) of 171 mM−1 s−1, which is higher than that of clinically approved magnetic resonance imaging (MRI) contrast agents such as ferumoxtran (65 mM−1 s−1) and ferumoxides (120 mM−1 s−1). Further, the developed drug-loaded hybrid platform showed significantly higher cytotoxicity towards breast cancer cells, which was augmented by in vitro magnetic hyperthermia. Bright-field microscopy and cell cycle analysis suggested that cell death occurred through induction of G2-M arrest and subsequent apoptosis. These findings clearly suggest the potential of the developed hybrid nanoplatform for image-guided combination therapy.
- 11 September 2024
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 7 (10) , 6641-6655
Polyphosphate-Mediated Crystallographic and Colloidal Stabilization of CuS Nanoparticles: Enhanced NIR-Responsive Chemo-Photothermal Efficacy
Photothermal therapy (PTT) is an emerging treatment modality for cancer management. However, the photothermal agents (PTAs) used in PTT should have sufficient biocompatibility, water dispersibility, and good photoresponsive. In this aspect, water-dispersible and biocompatible linear polyphosphate (LP)-functionalized CuS nanoparticles (LP-CuS NPs) were developed using sodium tripolyphosphate (LP molecule) as a surface passivating agent. The successful formation of the green covellite CuS phase was confirmed by X-ray diffraction and TEM analyses, and its surface functionalization with the LP ligand was evident from X-ray photoelectron spectroscopy, Fourier transform infrared, thermogravimetric analysis, and light scattering measurements. It has been found that the use of LP not only stabilizes the crystallographic covellite CuS phase by overcoming the requirement of a soft ligand but also provides long-term aqueous colloidal stability, which is essential for PTT applications. The aqueous suspension of LP-CuS NPs showed excellent heating efficacy under near infrared (NIR) light irradiation (980 nm) and has a strong binding affinity towards anticancer drug, doxorubicin hydrochloride (DOX). The drug-loaded systems (DOX@LP-CuS NPs) revealed a pH-dependent drug release behavior with higher concentrations in a mild acidic environment. The in vitro studies showed substantial cellular uptake of DOX-loaded systems in cancer cell lines and enhanced toxicity towards them upon irradiation of NIR light through apoptotic induction, suggesting their potential application in chemo-photothermal therapy.
- 11 September 2024
- Published by American Chemical Society (ACS) in ACS Applied Bio Materials
- Vol. 7 (10) , 6641-6655
Polyphosphate-Mediated Crystallographic and Colloidal Stabilization of CuS Nanoparticles: Enhanced NIR-Responsive Chemo-Photothermal Efficacy
Photothermal therapy (PTT) is an emerging treatment modality for cancer management. However, the photothermal agents (PTAs) used in PTT should have sufficient biocompatibility, water dispersibility, and good photoresponsive. In this aspect, water-dispersible and biocompatible linear polyphosphate (LP)-functionalized CuS nanoparticles (LP-CuS NPs) were developed using sodium tripolyphosphate (LP molecule) as a surface passivating agent. The successful formation of the green covellite CuS phase was confirmed by X-ray diffraction and TEM analyses, and its surface functionalization with the LP ligand was evident from X-ray photoelectron spectroscopy, Fourier transform infrared, thermogravimetric analysis, and light scattering measurements. It has been found that the use of LP not only stabilizes the crystallographic covellite CuS phase by overcoming the requirement of a soft ligand but also provides long-term aqueous colloidal stability, which is essential for PTT applications. The aqueous suspension of LP-CuS NPs showed excellent heating efficacy under near infrared (NIR) light irradiation (980 nm) and has a strong binding affinity towards anticancer drug, doxorubicin hydrochloride (DOX). The drug-loaded systems (DOX@LP-CuS NPs) revealed a pH-dependent drug release behavior with higher concentrations in a mild acidic environment. The in vitro studies showed substantial cellular uptake of DOX-loaded systems in cancer cell lines and enhanced toxicity towards them upon irradiation of NIR light through apoptotic induction, suggesting their potential application in chemo-photothermal therapy.
- Open Access
- 9 September 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (38) , 40182-40203
Interfacial Engineering over Pt–Calcium Ferrite/2D Carbon Nitride Nanosheet p–n Heterojunctions for Superior Photocatalytic Properties
The present study discloses the fabrication of efficient p-n heterojunctions using n-type polymeric bulk carbon nitride (b-CN, E g = 2.7 eV) or exfoliated nanosheets of carbon nitride (NSCN, E g = 2.9 eV) with p-type spinel ferrite CaFe2O4 (CFO, E g = 1.9 eV) for photocatalytic hydrogen generation. A series of p-n combinations were fabricated and characterized by various techniques. The oxide-carbon nitride interactions, light absorption, band alignment at the interface, and water/H3O+ adsorption capability were elucidated over heterojunctions and correlated with the photocatalytic hydrogen yield. The main developments in the present study are as follows: (1) All heterojunctions were more active than pure phases. (2) The photocatalytic activity trend validated an increase in the lifetime of charge carriers from TRPL. Pt(1 wt %)-CFO(1 wt %)/NSCN (481.5 μmol/h/g under ultraviolet (UV)-visible-simulated light, 147.5 μmol/h/g under CFL illumination for 20 h, τavg = 10.33 ns) > Pt-NSCN > Pt-CFO/b-CN > CFO/NSCN > CFO/b-CN > NSCN > Pt/b-CN > mechanical mixture (MM) of 1 wt %CFO + NSCN-MM > 1 wt %CFO + b-CN-MM > CFO > b-CN (τavg = 4.5 ns). (3) Pt-CFO/NSCN was most active and exhibited 250 times enhanced photocatalytic activity as compared to parent bulk carbon nitride, 6.5 times more active than CFO/NSCN, and twice more active than Pt-NSCN. Thus, enhanced activity is attributed to the smooth channelizing of electrons across p-n junctions. (4) NSCN evidently offered improved characteristics as a support and photocatalyst over b-CN. The exfoliated NSCN occupied a superior few-layer morphology with 0.35 nm width as compared to parent b-CN. NSCN allowed 57% dispersion of 6 nm-sized CFO, while b-CN supported 14% dispersion of 7.8 nm-sized CFO particles, as revealed by small-angle X-ray scattering spectroscopy (SAXS). Sizes of 2-4 nm were observed for Pt nanoparticles in the 1 wt %Pt/1 wt % CFO/NSCN sample. A binding energy shift and an increase in the FWHM of X-ray photoelectron spectroscopy (XPS) core level peaks established charge transfer and enhanced band bending on p-n contact in Pt-CFO/NSCN. FsTAS revealed the decay of photogenerated electrons via trapping in shallow traps (τ1, τ2) and deep traps (τ3). Lifetimes τ1 (3.19 ps, 42%) and τ2 (187 ps, 31%) were higher in NSCN than those in b-CN (τ1 = 2.2 ps, 42%, τ2 = 30 ps, 31%), which verified that the recombination reaction rate was suppressed by 6 times in NSCN (k 2 = 0.53 × 1010 s-1) as compared to b-CN (k 2 = 3.33 × 1010 s-1). Deep traps lie below the H+/H2 reduction potential; thus, electrons in deep traps are not available for photocatalytic H2 generation. (5) The role of CFO in enhancing water adsorption capability was modeled by molecular dynamics. NSCN or b-CN both showed very poor interaction with water molecules; however, the CFO cluster adsorbed H3O+ ions very strongly through the electrostatic interaction between calcium and oxygen (of H3O+). Pt also showed a strong affinity for H2O but not for H3O+. Thus, both CFO and Pt facilitated NSCN to access water molecules, and CFO further sustained the adsorption of H3O+ molecules, crucial for the photocatalytic reduction of water molecules. (6) Band potentials of CFO and NSCN aligned suitably at the interface of CFO/NSCN, resulting in a type-II band structure. Valence band offset (VBO, ΔE VB) and conduction band offset (CBO, ΔE CB) were calculated at the interface, resulting in an effective band gap of 1.41 eV (2.9 - ΔE VB = 1.9 - ΔE CB), much lower than parent compounds. The interfacial band structure was efficient in driving photogenerated electrons from the CB of CFO to the CB of NSCN and holes from the VB of NSCN to the VB of CFO, thus successfully separating charge carriers, as supported by the increased lifetime of charge carriers and favorable photocatalytic H2 yield.
- 9 September 2024
- Published by American Chemical Society (ACS) in ACS Omega
- Vol. 9 (38) , 40182-40203
Open AccessInterfacial Engineering over Pt–Calcium Ferrite/2D Carbon Nitride Nanosheet p–n Heterojunctions for Superior Photocatalytic Properties
The present study discloses the fabrication of efficient p-n heterojunctions using n-type polymeric bulk carbon nitride (b-CN, E g = 2.7 eV) or exfoliated nanosheets of carbon nitride (NSCN, E g = 2.9 eV) with p-type spinel ferrite CaFe2O4 (CFO, E g = 1.9 eV) for photocatalytic hydrogen generation. A series of p-n combinations were fabricated and characterized by various techniques. The oxide-carbon nitride interactions, light absorption, band alignment at the interface, and water/H3O+ adsorption capability were elucidated over heterojunctions and correlated with the photocatalytic hydrogen yield. The main developments in the present study are as follows: (1) All heterojunctions were more active than pure phases. (2) The photocatalytic activity trend validated an increase in the lifetime of charge carriers from TRPL. Pt(1 wt %)-CFO(1 wt %)/NSCN (481.5 μmol/h/g under ultraviolet (UV)-visible-simulated light, 147.5 μmol/h/g under CFL illumination for 20 h, τavg = 10.33 ns) > Pt-NSCN > Pt-CFO/b-CN > CFO/NSCN > CFO/b-CN > NSCN > Pt/b-CN > mechanical mixture (MM) of 1 wt %CFO + NSCN-MM > 1 wt %CFO + b-CN-MM > CFO > b-CN (τavg = 4.5 ns). (3) Pt-CFO/NSCN was most active and exhibited 250 times enhanced photocatalytic activity as compared to parent bulk carbon nitride, 6.5 times more active than CFO/NSCN, and twice more active than Pt-NSCN. Thus, enhanced activity is attributed to the smooth channelizing of electrons across p-n junctions. (4) NSCN evidently offered improved characteristics as a support and photocatalyst over b-CN. The exfoliated NSCN occupied a superior few-layer morphology with 0.35 nm width as compared to parent b-CN. NSCN allowed 57% dispersion of 6 nm-sized CFO, while b-CN supported 14% dispersion of 7.8 nm-sized CFO particles, as revealed by small-angle X-ray scattering spectroscopy (SAXS). Sizes of 2-4 nm were observed for Pt nanoparticles in the 1 wt %Pt/1 wt % CFO/NSCN sample. A binding energy shift and an increase in the FWHM of X-ray photoelectron spectroscopy (XPS) core level peaks established charge transfer and enhanced band bending on p-n contact in Pt-CFO/NSCN. FsTAS revealed the decay of photogenerated electrons via trapping in shallow traps (τ1, τ2) and deep traps (τ3). Lifetimes τ1 (3.19 ps, 42%) and τ2 (187 ps, 31%) were higher in NSCN than those in b-CN (τ1 = 2.2 ps, 42%, τ2 = 30 ps, 31%), which verified that the recombination reaction rate was suppressed by 6 times in NSCN (k 2 = 0.53 × 1010 s-1) as compared to b-CN (k 2 = 3.33 × 1010 s-1). Deep traps lie below the H+/H2 reduction potential; thus, electrons in deep traps are not available for photocatalytic H2 generation. (5) The role of CFO in enhancing water adsorption capability was modeled by molecular dynamics. NSCN or b-CN both showed very poor interaction with water molecules; however, the CFO cluster adsorbed H3O+ ions very strongly through the electrostatic interaction between calcium and oxygen (of H3O+). Pt also showed a strong affinity for H2O but not for H3O+. Thus, both CFO and Pt facilitated NSCN to access water molecules, and CFO further sustained the adsorption of H3O+ molecules, crucial for the photocatalytic reduction of water molecules. (6) Band potentials of CFO and NSCN aligned suitably at the interface of CFO/NSCN, resulting in a type-II band structure. Valence band offset (VBO, ΔE VB) and conduction band offset (CBO, ΔE CB) were calculated at the interface, resulting in an effective band gap of 1.41 eV (2.9 - ΔE VB = 1.9 - ΔE CB), much lower than parent compounds. The interfacial band structure was efficient in driving photogenerated electrons from the CB of CFO to the CB of NSCN and holes from the VB of NSCN to the VB of CFO, thus successfully separating charge carriers, as supported by the increased lifetime of charge carriers and favorable photocatalytic H2 yield.