Yaoqiang Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yaoqiang Chen has a total of 319 co-authors. Here are the top co-authors by number of shared publications:
Maochu Gong
Key Laboratory of Green Chemistry & Technology of the Ministry of Education, College of Chemistry, Sichuan University, Chengdu 610064, China
36 shared publications- Jianli Wang
College of Chemistry Sichuan University Chengdu P. R. China
20 shared publications - Haidi Xu
Institute of New Energy and Low-Carbon Technology, Sichuan University, Chengdu 610207, China
19 shared publications Ming Zhao
Key Laboratory of Green Chemistry and Technology, Ministry of Education, College of Chemistry, Sichuan University, Chengdu 610064, Sichuan, China
19 shared publicationsLi Lan
College of Pharmacy and Biological Engineering, Chengdu University
18 shared publications- Lin Zhong
College of Chemical Engineering
16 shared publications
Latest Publications
- Open Access
Revealing the Electronic Effects Between Pt and W on the Performance of Selective Catalytic Reduction of NOx with H2 over Pt-W/SSZ-13
Selective catalytic reduction of NOx with H2 (H2-SCR) is crucial for eliminating NOx emissions from hydrogen internal combustion engines (H2-ICE). Although 1 wt.% Pt/SSZ-13 (Pt/SZ) is a promising H2-SCR catalyst, it faces challenges such as a narrow operating window and low N2 selectivity. Herein, the effects of WO3 on improving the H2-SCR performance of Pt/SZ was investigated. Results showed that incorporating 5 wt.% WO3 significantly widened the temperature window for 80% NOx conversion and enhanced N2 selectivity at 90–180 °C. Several characterizations revealed that electrons transfer from W to Pt, so more active Pt0 species were formed on 1 wt.% Pt-5 wt.% W/SZ (Pt-5W/SZ). In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis indicated that more active monodentate nitrates, nitrites, and NH4+ species were generated on Pt-5W/SZ, which are key intermediates for N2 formation. Consequently, the temperature windows for NOx conversion (over 80%) and N2 selectivity (over 70%) were widened by 65 °C and 66 °C, respectively. This work provides insights into the developing H2-SCR catalysts with broader operating windows and higher N2 selectivity.
Open AccessRevealing the Electronic Effects Between Pt and W on the Performance of Selective Catalytic Reduction of NOx with H2 over Pt-W/SSZ-13
Selective catalytic reduction of NOx with H2 (H2-SCR) is crucial for eliminating NOx emissions from hydrogen internal combustion engines (H2-ICE). Although 1 wt.% Pt/SSZ-13 (Pt/SZ) is a promising H2-SCR catalyst, it faces challenges such as a narrow operating window and low N2 selectivity. Herein, the effects of WO3 on improving the H2-SCR performance of Pt/SZ was investigated. Results showed that incorporating 5 wt.% WO3 significantly widened the temperature window for 80% NOx conversion and enhanced N2 selectivity at 90–180 °C. Several characterizations revealed that electrons transfer from W to Pt, so more active Pt0 species were formed on 1 wt.% Pt-5 wt.% W/SZ (Pt-5W/SZ). In situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis indicated that more active monodentate nitrates, nitrites, and NH4+ species were generated on Pt-5W/SZ, which are key intermediates for N2 formation. Consequently, the temperature windows for NOx conversion (over 80%) and N2 selectivity (over 70%) were widened by 65 °C and 66 °C, respectively. This work provides insights into the developing H2-SCR catalysts with broader operating windows and higher N2 selectivity.
- 18 November 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (23) , 23043-23057
Insight into the Key Role of Yttrium Modification for the Enhanced Hydrothermal Stability over Y-Cu-SSZ-39 Zeolite Catalysts
- 18 November 2024
- Published by American Chemical Society (ACS) in Energy & Fuels
- Vol. 38 (23) , 23043-23057
Insight into the Key Role of Yttrium Modification for the Enhanced Hydrothermal Stability over Y-Cu-SSZ-39 Zeolite Catalysts
- 26 April 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (10) , 7353-7368
Unidirectional Electron Transfer on Bismuth-Doped Pt/YMn2O5 for Efficient CO Oxidation as Diesel Oxidation Catalysts
- 26 April 2024
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 14 (10) , 7353-7368
Unidirectional Electron Transfer on Bismuth-Doped Pt/YMn2O5 for Efficient CO Oxidation as Diesel Oxidation Catalysts
- 21 March 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (13) , 5718-5728
Revealing the Roles of Rh in Inhibiting “NOx Puff” on the Cu/Ba-CeO2 Catalyst during the Process of Lean NOx Trap
- 21 March 2024
- Published by American Chemical Society (ACS) in Industrial & Engineering Chemistry Research
- Vol. 63 (13) , 5718-5728
Revealing the Roles of Rh in Inhibiting “NOx Puff” on the Cu/Ba-CeO2 Catalyst during the Process of Lean NOx Trap
- 13 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (12) , 14694-14703
Engineering a PtCu Alloy to Improve N2 Selectivity of NH3–SCO over the Pt/SSZ-13 Catalyst
Improving the N2 selectivity is always a great challenge for the selective catalytic oxidation of ammonia (NH3-SCO) over noble-metal-based (especially Pt) catalysts. In this work, Cu as an efficient promoter was introduced into the Pt/SSZ-13 catalyst to significantly improve the N2 selectivity of the NH3-SCO reaction. A PtCu alloy was formed in the PtCu/SSZ-13 catalyst, as confirmed by X-ray diffraction, transmission electron microscopy, energy dispersive spectrometry mapping, and X-ray absorption spectroscopy results. As indicated by the X-ray photoelectron spectroscopy analysis, the Pt species in the alloyed PtCu nanoparticle was mainly present in the electron-rich state on PtCu/SSZ-13, while the electron-deficient Cu and isolated Cu2+ species were both present on the surface of PtCu/SSZ-13. Due to such a unique alloyed structure with an altered oxidation state, the N2 selectivity of NH3-SCO on the PtCu/SSZ-13 catalyst was remarkably improved, while the NH3-SCO activity was kept comparable to that on Pt/SSZ-13. The reaction path was changed from the NH mechanism on Pt/SSZ-13 to both NH and internal selective catalytic reduction mechanisms on the PtCu/SSZ-13 catalyst, which was considered the main reason for the enhanced N2 selectivity. This work provides a new route to synthesize efficient alloy catalysts for optimizing the N2 selectivity of NH3-SCO for NH3 slip control in diesel exhaust purification.
- 13 March 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (12) , 14694-14703
Engineering a PtCu Alloy to Improve N2 Selectivity of NH3–SCO over the Pt/SSZ-13 Catalyst
Improving the N2 selectivity is always a great challenge for the selective catalytic oxidation of ammonia (NH3-SCO) over noble-metal-based (especially Pt) catalysts. In this work, Cu as an efficient promoter was introduced into the Pt/SSZ-13 catalyst to significantly improve the N2 selectivity of the NH3-SCO reaction. A PtCu alloy was formed in the PtCu/SSZ-13 catalyst, as confirmed by X-ray diffraction, transmission electron microscopy, energy dispersive spectrometry mapping, and X-ray absorption spectroscopy results. As indicated by the X-ray photoelectron spectroscopy analysis, the Pt species in the alloyed PtCu nanoparticle was mainly present in the electron-rich state on PtCu/SSZ-13, while the electron-deficient Cu and isolated Cu2+ species were both present on the surface of PtCu/SSZ-13. Due to such a unique alloyed structure with an altered oxidation state, the N2 selectivity of NH3-SCO on the PtCu/SSZ-13 catalyst was remarkably improved, while the NH3-SCO activity was kept comparable to that on Pt/SSZ-13. The reaction path was changed from the NH mechanism on Pt/SSZ-13 to both NH and internal selective catalytic reduction mechanisms on the PtCu/SSZ-13 catalyst, which was considered the main reason for the enhanced N2 selectivity. This work provides a new route to synthesize efficient alloy catalysts for optimizing the N2 selectivity of NH3-SCO for NH3 slip control in diesel exhaust purification.
- 18 September 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (38) , 44887-44898
Boosting Methane Combustion over Pd/Y2O3–ZrO2 Catalyst by Inert Silicate Patches Tuning Both Palladium Chemistry and Support Hydrophobicity
Supported palladium (Pd) catalysts are widely utilized to reduce the emission of exhaust CH4 from lean-burn engines by catalytic combustion. A large amount of water vapor in the exhaust makes hydroxyls accumulate on the catalyst surface at temperatures below 450 °C, leading to severe catalyst deactivation. Tuning palladium chemistry and inhibiting water adsorption are critical to developing active catalysts. Modifying the support surface with inert silicates would both change the palladium-support interaction and decrease water adsorption sites. This study reports an improved Pd/Y2O3-ZrO2 catalyst by constructing silicate patches on yttria-stabilized zirconia (Y2O3-ZrO2) support. The silicates hindered electron transfer from Y2O3-ZrO2 oxygen vacancies to palladium, which optimized palladium chemistry, especially the reducibility of active PdO species, and thereby boosted CH4 conversion under dry conditions. The temperature of 90% methane conversion (T90) over the catalyst decreased from 386 to 309 °C. Moreover, the inert silicates decreased surface oxygen vacancies of Y2O3-ZrO2 to improve support hydrophobicity, thereby inhibiting hydroxyl accumulation. The poisoning effect of water on the active sites located on the palladium-silicate interface was alleviated. When reaction gases contained 10 vol % water, the silicate-modified catalyst still showed higher activity with T90 of 404 °C, which is lower than T90 of 452 °C for unmodified catalyst. This work represents a step forward in preparing high-performance palladium catalysts for low-temperature wet methane combustion.
- 18 September 2023
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 15 (38) , 44887-44898
Boosting Methane Combustion over Pd/Y2O3–ZrO2 Catalyst by Inert Silicate Patches Tuning Both Palladium Chemistry and Support Hydrophobicity
Supported palladium (Pd) catalysts are widely utilized to reduce the emission of exhaust CH4 from lean-burn engines by catalytic combustion. A large amount of water vapor in the exhaust makes hydroxyls accumulate on the catalyst surface at temperatures below 450 °C, leading to severe catalyst deactivation. Tuning palladium chemistry and inhibiting water adsorption are critical to developing active catalysts. Modifying the support surface with inert silicates would both change the palladium-support interaction and decrease water adsorption sites. This study reports an improved Pd/Y2O3-ZrO2 catalyst by constructing silicate patches on yttria-stabilized zirconia (Y2O3-ZrO2) support. The silicates hindered electron transfer from Y2O3-ZrO2 oxygen vacancies to palladium, which optimized palladium chemistry, especially the reducibility of active PdO species, and thereby boosted CH4 conversion under dry conditions. The temperature of 90% methane conversion (T90) over the catalyst decreased from 386 to 309 °C. Moreover, the inert silicates decreased surface oxygen vacancies of Y2O3-ZrO2 to improve support hydrophobicity, thereby inhibiting hydroxyl accumulation. The poisoning effect of water on the active sites located on the palladium-silicate interface was alleviated. When reaction gases contained 10 vol % water, the silicate-modified catalyst still showed higher activity with T90 of 404 °C, which is lower than T90 of 452 °C for unmodified catalyst. This work represents a step forward in preparing high-performance palladium catalysts for low-temperature wet methane combustion.
- Open Access
Revealing the Roles of Cu/Ba on Ce-Based Passive NOx Adsorbers
At present, passive NOx adsorbers (PNAs) represent one of the most effective technologies for addressing NOx emissions from diesel engines during cold-start periods. Conventional PNAs, which primarily consist of noble metals (such as Pt, Pd, and Ag) loaded on metal oxides or zeolites, share the common drawback of high production costs. Consequently, developing low-cost PNAs with outstanding NOx storage performance remains a significant challenge. In this study, a series of CuxBa5Ce adsorbents were synthesized using the impregnation method, and a monolithic adsorbent was employed to evaluate NOx storage and release performance. Techniques such as XRD, UV-Vis DRs, H2-TPR, XPS, and in situ DRIFTs confirmed the crucial roles of Cu and Ba in NOx storage and release. Specifically, the incorporation of Cu into CeO2 enhanced NOx storage performance. Moreover, in the Cu3Ba5Ce adsorbent, the addition of Ba not only introduced new storage sites and altered the stability of NOx adsorption species but also helped prevent the aggregation of CuO, thereby prolonging the complete NOx storage duration and satisfying desorption temperature requirements. The Cu3Ba5Ce adsorbent exhibited the most favorable NOx storage performance, including a complete NOx storage time of 135 s and a NOx storage efficiency exceeding 50% at 80 °C over a 10 min period. While PNAs loaded with noble metals, such as Pd/CeO2 and Pt/CeO2, exhibited NOx storage efficiencies below 50% after adsorbing for 5 min at 80 °C. Therefore, this research offered a crucial strategy for developing non-noble-metal-loaded, Ce-based PNAs.
Open AccessRevealing the Roles of Cu/Ba on Ce-Based Passive NOx Adsorbers
At present, passive NOx adsorbers (PNAs) represent one of the most effective technologies for addressing NOx emissions from diesel engines during cold-start periods. Conventional PNAs, which primarily consist of noble metals (such as Pt, Pd, and Ag) loaded on metal oxides or zeolites, share the common drawback of high production costs. Consequently, developing low-cost PNAs with outstanding NOx storage performance remains a significant challenge. In this study, a series of CuxBa5Ce adsorbents were synthesized using the impregnation method, and a monolithic adsorbent was employed to evaluate NOx storage and release performance. Techniques such as XRD, UV-Vis DRs, H2-TPR, XPS, and in situ DRIFTs confirmed the crucial roles of Cu and Ba in NOx storage and release. Specifically, the incorporation of Cu into CeO2 enhanced NOx storage performance. Moreover, in the Cu3Ba5Ce adsorbent, the addition of Ba not only introduced new storage sites and altered the stability of NOx adsorption species but also helped prevent the aggregation of CuO, thereby prolonging the complete NOx storage duration and satisfying desorption temperature requirements. The Cu3Ba5Ce adsorbent exhibited the most favorable NOx storage performance, including a complete NOx storage time of 135 s and a NOx storage efficiency exceeding 50% at 80 °C over a 10 min period. While PNAs loaded with noble metals, such as Pd/CeO2 and Pt/CeO2, exhibited NOx storage efficiencies below 50% after adsorbing for 5 min at 80 °C. Therefore, this research offered a crucial strategy for developing non-noble-metal-loaded, Ce-based PNAs.
- 14 December 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 25 (1) , 130-152
Progress in reaction mechanisms and catalyst development of ceria-based catalysts for low-temperature CO2methanation
We present a detailed review on the mechanistic understanding and catalyst development of CeO2-based CO2methanation catalysts. Current challenges for deeper investigations and future perspectives are presented as well.
- 14 December 2022
- Published by Royal Society of Chemistry (RSC) in Green Chemistry
- Vol. 25 (1) , 130-152
Progress in reaction mechanisms and catalyst development of ceria-based catalysts for low-temperature CO2methanation
We present a detailed review on the mechanistic understanding and catalyst development of CeO2-based CO2methanation catalysts. Current challenges for deeper investigations and future perspectives are presented as well.
- 31 October 2022
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 12 (22) , 14026-14039
Highlights on Key Roles of Y on the Hydrothermal Stability at 900 °C of Cu/SSZ-39 for NH3-SCR
- 31 October 2022
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 12 (22) , 14026-14039
Highlights on Key Roles of Y on the Hydrothermal Stability at 900 °C of Cu/SSZ-39 for NH3-SCR