Seung H. Kang
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Seung H. Kang has a total of 21 co-authors. Here are the top co-authors by number of shared publications:
- Seong-Ook Jung
Yonsei University
7 shared publications Byungkyu Song
Department of Electrical and Electronic Engineering, Yonsei University, Seoul 03722, South Korea
5 shared publications- Sara Choi
School of Electrical and Electronic Engineering, Yonsei University, Seoul 120-749, South Korea
4 shared publications Jung Pill Kim
Qualcomm Incorporated, San Diego, CA 92121 USA
3 shared publications- Taehui Na
Incheon National University
3 shared publications - Hong Keun Ahn
School of Electrical and Electronic Engineering, Yonsei University, Seoul, Republic of Korea
2 shared publications
Latest Publications
- 7 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 68 (6) , 2481-2493
Self-Referenced Single-Ended Resistance Monitoring Write Termination Scheme for STT-RAM Write Energy Reduction
Essential design requirements for a sense amplifier (SA) used in the resistance monitoring write termination (RM-WT) scheme are suggested to reduce the write energy of spin-transfer-torque random access memory (STT-RAM) while achieving a write pass yield comparable to that of a conventional write operation. In addition, a self-referenced single-ended RM-WT (SS-RM-WT) scheme is proposed. To reduce the offset voltage, a single-ended sensing circuit (SE-SC) is used in the SA. A data-aware input voltage-transfer method is also adopted in the SE-SC to maximize the input voltage difference. By adopting a capacitor between the output of the SE-SC and the input of an inverter generating a logical output used for the write termination, the conflict between maintaining and changing the output of the SE-SC is resolved. The simulation results using the industry-compatible 65-nm technology HSPICE model parameters show that the proposed SS-RM-WT scheme achieves a 44% write energy saving on average without increasing the write error rate. Area overhead is only 11.8% for a 256-kb STT-RAM array, whereas that of the previous self-referenced RM-WT schemes is up to 42.5%.
- 7 April 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 68 (6) , 2481-2493
Self-Referenced Single-Ended Resistance Monitoring Write Termination Scheme for STT-RAM Write Energy Reduction
Essential design requirements for a sense amplifier (SA) used in the resistance monitoring write termination (RM-WT) scheme are suggested to reduce the write energy of spin-transfer-torque random access memory (STT-RAM) while achieving a write pass yield comparable to that of a conventional write operation. In addition, a self-referenced single-ended RM-WT (SS-RM-WT) scheme is proposed. To reduce the offset voltage, a single-ended sensing circuit (SE-SC) is used in the SA. A data-aware input voltage-transfer method is also adopted in the SE-SC to maximize the input voltage difference. By adopting a capacitor between the output of the SE-SC and the input of an inverter generating a logical output used for the write termination, the conflict between maintaining and changing the output of the SE-SC is resolved. The simulation results using the industry-compatible 65-nm technology HSPICE model parameters show that the proposed SS-RM-WT scheme achieves a 44% write energy saving on average without increasing the write error rate. Area overhead is only 11.8% for a 256-kb STT-RAM array, whereas that of the previous self-referenced RM-WT schemes is up to 42.5%.
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Information Forensics and Security
- Vol. 16 (15566013) , 2843-2853
Environmental-Variation-Tolerant Magnetic Tunnel Junction-Based Physical Unclonable Function Cell With Auto Write-Back Technique
Recently, with the increase in popularity of Internet of Things (IoT) devices, cryptographic protection techniques have become necessary for high-security applications. In general, IoT devices have strict power and area constraints. Thus, use of a physical unclonable function (PUF), which can generate a secret key at low cost, can be advantageous for high-security IoT devices. This paper presents a novel environmental-variation-tolerant (EVT) magnetic tunnel junction (MTJ)-based PUF that has a small area, high randomness, and low bit error rate (BER) compared to previous PUFs. The simulation results obtained using industry-compatible 65-nm model parameters indicate that the proposed PUF exhibits an inter-chip Hamming distance of 0.4901 and entropy of 0.9997, which proves the randomness of the PUF response. In addition, the proposed PUF exhibits the lowest BER across a wide voltage range (0.9 V–1.3 V) and temperature range (-25 °C–75 °C) compared with previous PUFs.
- 1 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Information Forensics and Security
- Vol. 16 (15566013) , 2843-2853
Environmental-Variation-Tolerant Magnetic Tunnel Junction-Based Physical Unclonable Function Cell With Auto Write-Back Technique
Recently, with the increase in popularity of Internet of Things (IoT) devices, cryptographic protection techniques have become necessary for high-security applications. In general, IoT devices have strict power and area constraints. Thus, use of a physical unclonable function (PUF), which can generate a secret key at low cost, can be advantageous for high-security IoT devices. This paper presents a novel environmental-variation-tolerant (EVT) magnetic tunnel junction (MTJ)-based PUF that has a small area, high randomness, and low bit error rate (BER) compared to previous PUFs. The simulation results obtained using industry-compatible 65-nm model parameters indicate that the proposed PUF exhibits an inter-chip Hamming distance of 0.4901 and entropy of 0.9997, which proves the randomness of the PUF response. In addition, the proposed PUF exhibits the lowest BER across a wide voltage range (0.9 V–1.3 V) and temperature range (-25 °C–75 °C) compared with previous PUFs.
- 25 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (1) , 12-18
STT-MRAM Sensing: A Review
This paper presents a review of developments in spin-transfer-torque magnetoresistive random access memory (STT-MRAM) sensing over the past 20 years from a circuit design perspective. Various sensing schemes are categorized and described according to the data-cell variation-tolerant characteristics, pre-amplifiers, and offset tolerance. Key breakthroughs for achieving the optimal reference scheme, read disturbance prevention, read energy reduction, accurate yield estimation, and overcoming other non-idealities are discussed. This review is intended to facilitate further enhancement of STT-MRAM sensing in advanced technology nodes, thereby fulfilling STT-MRAM’s potential as a universal memory.
- 25 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems II: Express Briefs
- Vol. 68 (1) , 12-18
STT-MRAM Sensing: A Review
This paper presents a review of developments in spin-transfer-torque magnetoresistive random access memory (STT-MRAM) sensing over the past 20 years from a circuit design perspective. Various sensing schemes are categorized and described according to the data-cell variation-tolerant characteristics, pre-amplifiers, and offset tolerance. Key breakthroughs for achieving the optimal reference scheme, read disturbance prevention, read energy reduction, accurate yield estimation, and overcoming other non-idealities are discussed. This review is intended to facilitate further enhancement of STT-MRAM sensing in advanced technology nodes, thereby fulfilling STT-MRAM’s potential as a universal memory.
- 20 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 41 (7) , 1126-1129
Performance Prospects of Deeply Scaled Spin-Transfer Torque Magnetic Random-Access Memory for In-Memory Computing
In recent years, Spin-Transfer-Torque Magnetic Random Access Memory (STT-MRAM) has been considered as one of the most promising non-volatile memory candidates for in-memory computing. However, system-level performance gains using STT-MRAM for in-memory computing at deeply scaled nodes have not been assessed with respect to more mature memory technologies. In this letter, we present perpendicular magnetic tunnel junction (pMTJ) STT-MRAM devices at 28nm and 7nm. We evaluate the system-level performance of convolutional neural network (CNN) inference with STT-MRAM arrays in comparison to Static Random Access Memory (SRAM). We benchmark STT-MRAM and SRAM in terms of area, leakage power, energy, and latency from 65nm to 7nm technology nodes. Our results show that STT-MRAM keeps providing ~5× smaller synaptic core area, ~20× less leakage power, and ~7× less energy than SRAM when both devices are scaled from 65nm to 7nm. With the emerging need for low power computation for a broad range of applications such as internet-of-things (IoT) and neural network (NN), STT-MRAM can offer energy-efficient and high-density in-memory computing.
- 20 May 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Electron Device Letters
- Vol. 41 (7) , 1126-1129
Performance Prospects of Deeply Scaled Spin-Transfer Torque Magnetic Random-Access Memory for In-Memory Computing
In recent years, Spin-Transfer-Torque Magnetic Random Access Memory (STT-MRAM) has been considered as one of the most promising non-volatile memory candidates for in-memory computing. However, system-level performance gains using STT-MRAM for in-memory computing at deeply scaled nodes have not been assessed with respect to more mature memory technologies. In this letter, we present perpendicular magnetic tunnel junction (pMTJ) STT-MRAM devices at 28nm and 7nm. We evaluate the system-level performance of convolutional neural network (CNN) inference with STT-MRAM arrays in comparison to Static Random Access Memory (SRAM). We benchmark STT-MRAM and SRAM in terms of area, leakage power, energy, and latency from 65nm to 7nm technology nodes. Our results show that STT-MRAM keeps providing ~5× smaller synaptic core area, ~20× less leakage power, and ~7× less energy than SRAM when both devices are scaled from 65nm to 7nm. With the emerging need for low power computation for a broad range of applications such as internet-of-things (IoT) and neural network (NN), STT-MRAM can offer energy-efficient and high-density in-memory computing.
- 18 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 27 (11) , 2548-2555
Offset-Canceling Single-Ended Sensing Scheme With One-Bit-Line Precharge Architecture for Resistive Nonvolatile Memory in 65-nm CMOS
In the design of nonvolatile memory (NVM), the sensing scheme (SS) has become a read-energy bottleneck because the required read-cell current is too large to satisfy a target read yield. This problem is further aggravated by technology scaling because increased process variation and reduced supply voltage (VDD) require more current to satisfy the target read yield. This paper proposes an offset-canceling single-ended SS (OCSE-SS) with one-bit-line precharge architecture (1BLPA) that is intended for use in ultralow power NVM applications. The test chip is fabricated using 65-nm process technology, and the measurement results show that the read energy per bit of the OCSE-SS is 1/3 compared to that of the conventional SS (Conv-SS). The read energy reduction comes from the single-ended sensing, offset cancellation, and 1BLPA features. Moreover, when a resistance difference between the data and reference cells is as small as 0.5 kΩ , the OCSE-SS reads successfully with a VDD of 1.0 V and a sensing time (tSEN) of 17 ns due to the offset cancellation characteristic, whereas the Conv-SS fails regardless of VDD and tSEN values.
- 18 July 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 27 (11) , 2548-2555
Offset-Canceling Single-Ended Sensing Scheme With One-Bit-Line Precharge Architecture for Resistive Nonvolatile Memory in 65-nm CMOS
In the design of nonvolatile memory (NVM), the sensing scheme (SS) has become a read-energy bottleneck because the required read-cell current is too large to satisfy a target read yield. This problem is further aggravated by technology scaling because increased process variation and reduced supply voltage (VDD) require more current to satisfy the target read yield. This paper proposes an offset-canceling single-ended SS (OCSE-SS) with one-bit-line precharge architecture (1BLPA) that is intended for use in ultralow power NVM applications. The test chip is fabricated using 65-nm process technology, and the measurement results show that the read energy per bit of the OCSE-SS is 1/3 compared to that of the conventional SS (Conv-SS). The read energy reduction comes from the single-ended sensing, offset cancellation, and 1BLPA features. Moreover, when a resistance difference between the data and reference cells is as small as 0.5 kΩ , the OCSE-SS reads successfully with a VDD of 1.0 V and a sensing time (tSEN) of 17 ns due to the offset cancellation characteristic, whereas the Conv-SS fails regardless of VDD and tSEN values.
- 16 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 66 (8) , 2963-2972
Offset-Cancellation Sensing-Circuit-Based Nonvolatile Flip-Flop Operating in Near-Threshold Voltage Region
For ultra-low-power Internet of Things (IoT) devices powered by batteries or energy harvesting, a nonvolatile flip-flop (NV-FF) operating in the near-threshold voltage (NTV) region has been widely studied to save both standby and active power. However, in the NTV region, the NV-FF suffers from restore yield and performance degradation due to the increase in process variation combined with the decrease in supply voltage. This paper presents a comparative analysis of the previous NV-FFs according to supply voltage scaling and suggests the design directions for implementing the NV-FF that can operate with compact area and high performance even in the NTV region. Through the comparative analysis, a novel offset-cancellation sensing-circuit (OCSC)-based NV-FF, which adopts a separate latch and sensing circuit structure and an offset-cancellation technique, is proposed. The Monte Carlo HSPICE simulation results using industry-compatible 65-nm model parameters show that the proposed NV-FF satisfies a target restore yield with 32% area, 88% speed, and 82% energy savings in comparison with a representative NV-FF of the merged latch and sensing circuit structure.
- 16 May 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Circuits and Systems I: Regular Papers
- Vol. 66 (8) , 2963-2972
Offset-Cancellation Sensing-Circuit-Based Nonvolatile Flip-Flop Operating in Near-Threshold Voltage Region
For ultra-low-power Internet of Things (IoT) devices powered by batteries or energy harvesting, a nonvolatile flip-flop (NV-FF) operating in the near-threshold voltage (NTV) region has been widely studied to save both standby and active power. However, in the NTV region, the NV-FF suffers from restore yield and performance degradation due to the increase in process variation combined with the decrease in supply voltage. This paper presents a comparative analysis of the previous NV-FFs according to supply voltage scaling and suggests the design directions for implementing the NV-FF that can operate with compact area and high performance even in the NTV region. Through the comparative analysis, a novel offset-cancellation sensing-circuit (OCSC)-based NV-FF, which adopts a separate latch and sensing circuit structure and an offset-cancellation technique, is proposed. The Monte Carlo HSPICE simulation results using industry-compatible 65-nm model parameters show that the proposed NV-FF satisfies a target restore yield with 32% area, 88% speed, and 82% energy savings in comparison with a representative NV-FF of the merged latch and sensing circuit structure.
- 27 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 27 (2) , 387-397
A Decoder for Short BCH Codes With High Decoding Efficiency and Low Power for Emerging Memories
In this paper, a double-error-correcting and triple-error-detecting (DEC-TED) Bose-Chaudhuri-Hocquenghem (BCH) code decoder with high decoding efficiency and low power for error correction in emerging memories is presented. To increase the decoding efficiency, we propose an adaptive error correction technique for the DEC-TED BCH code that detects the number of errors in a codeword immediately after syndrome generation and applies a different error correction algorithm depending on the error conditions. With the adaptive error correction technique, the average decoding latency and power consumption are significantly reduced owing to the increased decoding efficiency. To further reduce the power consumption, an invalid-transition-inhibition technique is proposed to remove the invalid transitions caused by glitches of syndrome vectors in the error-finding block. Synthesis results with an industry-compatible 65-nm technology library show that the proposed decoders for the (79, 64, 6) BCH code take only 37%-48% average decoding latency and achieve more than 70% power reduction compared to the conventional fully parallel decoder under the 10⁻⁴-10⁻² raw bit-error rate.
- 27 November 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 27 (2) , 387-397
A Decoder for Short BCH Codes With High Decoding Efficiency and Low Power for Emerging Memories
In this paper, a double-error-correcting and triple-error-detecting (DEC-TED) Bose-Chaudhuri-Hocquenghem (BCH) code decoder with high decoding efficiency and low power for error correction in emerging memories is presented. To increase the decoding efficiency, we propose an adaptive error correction technique for the DEC-TED BCH code that detects the number of errors in a codeword immediately after syndrome generation and applies a different error correction algorithm depending on the error conditions. With the adaptive error correction technique, the average decoding latency and power consumption are significantly reduced owing to the increased decoding efficiency. To further reduce the power consumption, an invalid-transition-inhibition technique is proposed to remove the invalid transitions caused by glitches of syndrome vectors in the error-finding block. Synthesis results with an industry-compatible 65-nm technology library show that the proposed decoders for the (79, 64, 6) BCH code take only 37%-48% average decoding latency and achieve more than 70% power reduction compared to the conventional fully parallel decoder under the 10⁻⁴-10⁻² raw bit-error rate.
- 11 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 64 (9) , 3639-3646
A Study on Practically Unlimited Endurance of STT-MRAM
Magnetic tunnel junctions integrated for spin-transfer torque magnetoresistive random-access memory are by far the only known solid-state memory element that can realize a combination of fast read/write speed and high endurance. This paper presents a comprehensive validation of high endurance of deeply scaled perpendicular magnetic tunnel junctions (pMTJs) in light of various potential spin-transfer torque magnetoresistive random-access memory (STT-MRAM) use cases. A statistical study is conducted on the time-dependent dielectric breakdown (TDDB) properties and the dependence of the pMTJ lifetime on voltage, polarity, pulsewidth, duty cycle, and temperature. The experimental results coupled with TDDB models project >1015 write cycles. Furthermore, this work reports system-level workload characterizations to understand the practical endurance requirements for realistic memory applications.The results suggestthat the cycling endurance of STT-MRAM is “practically unlimited,” which exceeds the requirements of various memory use cases, including high-performance applications such as CPU level-2 and level-3 caches.
- 11 August 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 64 (9) , 3639-3646
A Study on Practically Unlimited Endurance of STT-MRAM
Magnetic tunnel junctions integrated for spin-transfer torque magnetoresistive random-access memory are by far the only known solid-state memory element that can realize a combination of fast read/write speed and high endurance. This paper presents a comprehensive validation of high endurance of deeply scaled perpendicular magnetic tunnel junctions (pMTJs) in light of various potential spin-transfer torque magnetoresistive random-access memory (STT-MRAM) use cases. A statistical study is conducted on the time-dependent dielectric breakdown (TDDB) properties and the dependence of the pMTJ lifetime on voltage, polarity, pulsewidth, duty cycle, and temperature. The experimental results coupled with TDDB models project >1015 write cycles. Furthermore, this work reports system-level workload characterizations to understand the practical endurance requirements for realistic memory applications.The results suggestthat the cycling endurance of STT-MRAM is “practically unlimited,” which exceeds the requirements of various memory use cases, including high-performance applications such as CPU level-2 and level-3 caches.
- 2 March 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 63 (4) , 1768-1773
Demonstration of a Highly Tunable Hybrid nMOS-Magnetic-Tunnel-Junction Ring Oscillator
A highly tunable oscillator using magnetic tunnel junctions (MTJs) has been developed through integration with CMOS ring oscillators. MTJs are used to replace the pMOS transistors in a typical CMOS inverter fabricated in 40-nm CMOS. The hybrid MTJ-CMOS devices exhibit a voltage-controlled oscillator gain of 300-500 MHz/V and are tunable with respect to both voltage and magnetic field.
- 2 March 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Electron Devices
- Vol. 63 (4) , 1768-1773
Demonstration of a Highly Tunable Hybrid nMOS-Magnetic-Tunnel-Junction Ring Oscillator
A highly tunable oscillator using magnetic tunnel junctions (MTJs) has been developed through integration with CMOS ring oscillators. MTJs are used to replace the pMOS transistors in a typical CMOS inverter fabricated in 40-nm CMOS. The hybrid MTJ-CMOS devices exhibit a voltage-controlled oscillator gain of 300-500 MHz/V and are tunable with respect to both voltage and magnetic field.
- 1 July 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 365-370
Reference-circuit analysis for high-bandwidth spin transfer torque random access memory
A global reference-circuit (RC), which means one RC is shared with many sensing circuits (SC), is being considered for high-bandwidth STT-RAMs because of the low power consumption and small area characteristic. However, using the global RC for high-bandwidth STT-RAMs causes a droop effect and coupling noise effect, leading to the significant performance degradation. Thus, the validity of using the global RC should be identified. In this paper, the local RC and various global RCs are introduced, and compared in aspects of area, sensing time, and power consumption. By classification of the merits and demerits of various RCs, we present the following requirements of proper RC for high-bandwidth STT-RAMs: 1) small area, 2) no performance degradation, 3) low power consumption, and 4) process variation tolerant reference signal generation.
- 1 July 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 365-370
Reference-circuit analysis for high-bandwidth spin transfer torque random access memory
A global reference-circuit (RC), which means one RC is shared with many sensing circuits (SC), is being considered for high-bandwidth STT-RAMs because of the low power consumption and small area characteristic. However, using the global RC for high-bandwidth STT-RAMs causes a droop effect and coupling noise effect, leading to the significant performance degradation. Thus, the validity of using the global RC should be identified. In this paper, the local RC and various global RCs are introduced, and compared in aspects of area, sensing time, and power consumption. By classification of the merits and demerits of various RCs, we present the following requirements of proper RC for high-bandwidth STT-RAMs: 1) small area, 2) no performance degradation, 3) low power consumption, and 4) process variation tolerant reference signal generation.