Svetlana Polivtseva
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Svetlana Polivtseva has a total of 82 co-authors. Here are the top co-authors by number of shared publications:
- Malle Krunks
Department of Materials and Environmental Technology, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn, Estonia
6 shared publications - Olga Volobujeva
Laboratory for Thin Film Energy Materials, Department of Materials and Environmental Technology, Tallinn University of Technology, Ehitajate tee 5, 19086 Tallinn, Estonia
5 shared publications A. Mere
4 shared publications- Ilona Oja Acik
Tallinn University of Technology
4 shared publications - Angela Ivask
Institute of Molecular and Cell Biology, University of Tartu, Tartu, Estonia
3 shared publications Arvo Mere
School of Science Department of Cybernetics TalTech Tallinn Estonia
3 shared publications
Latest Publications
- Open Access
- 2 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Hyper-Porous Membranes for Nano-Confinement-Driven Chromatographic Uranium Trapping
Most conventional membrane and ion-exchange technologies fail to efficiently remediate ultradilute radioactive actinides in complex aquatic systems because of severe charge shielding by background electrolytes and diffusion-limited kinetics. Here, we break this operational mode by demonstrating high-velocity chromatographic nano-trapping using porous amorphous covalent triazine framework (CTF) composite membranes. Synthesized via a low-temperature Friedel-Crafts reaction, followed by programmable post-formation oxidation, the engineered polymer phase resists structural collapse, revealing a highly developed surface area of 230 m2 g−1 and a total pore volume of 132 mm3 g−1. When integrated into a sustainable fibrous cellulosic support, this architecture behaves similarly to an ultra-dense stationary phase in high-performance frontal liquid chromatography. Under continuous convective flow of 1 mL min−1, equivalent to a pure-water flux of 764 L h−1 m−2, the highly tortuous sub-nanometer channels eliminate mass-transfer resistance. At ecologically relevant pH values, thermodynamic speciation drives uranium to migrate as hydrocomplexed, nano-sized phases rather than as free ions. This reactive membrane achieves nearbenchmark theoretical capacity for uranium extraction over a wide trace range of 10 to 200 ppb in artificial seawater in a single pass. This morphology-enforced entrapment, driven by chemofixation at introduced polar N(O)-donor coordination nodes, establishes a design rule for sustainable reactive separation systems capable of on-the-fly resource recovery and environmental remediation.
- 2 July 2026
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessHyper-Porous Membranes for Nano-Confinement-Driven Chromatographic Uranium Trapping
Most conventional membrane and ion-exchange technologies fail to efficiently remediate ultradilute radioactive actinides in complex aquatic systems because of severe charge shielding by background electrolytes and diffusion-limited kinetics. Here, we break this operational mode by demonstrating high-velocity chromatographic nano-trapping using porous amorphous covalent triazine framework (CTF) composite membranes. Synthesized via a low-temperature Friedel-Crafts reaction, followed by programmable post-formation oxidation, the engineered polymer phase resists structural collapse, revealing a highly developed surface area of 230 m2 g−1 and a total pore volume of 132 mm3 g−1. When integrated into a sustainable fibrous cellulosic support, this architecture behaves similarly to an ultra-dense stationary phase in high-performance frontal liquid chromatography. Under continuous convective flow of 1 mL min−1, equivalent to a pure-water flux of 764 L h−1 m−2, the highly tortuous sub-nanometer channels eliminate mass-transfer resistance. At ecologically relevant pH values, thermodynamic speciation drives uranium to migrate as hydrocomplexed, nano-sized phases rather than as free ions. This reactive membrane achieves nearbenchmark theoretical capacity for uranium extraction over a wide trace range of 10 to 200 ppb in artificial seawater in a single pass. This morphology-enforced entrapment, driven by chemofixation at introduced polar N(O)-donor coordination nodes, establishes a design rule for sustainable reactive separation systems capable of on-the-fly resource recovery and environmental remediation.
- Open Access
- 15 June 2026
- Published by Wiley in Small Structures
- Vol. 7 (6)
Defect‐Topology Control of Anisotropic Lattice Flexibility for High‐Performance Fluoride‐Ion Electrolytes
Fluoride‐ion conductors show promise for next‐generation solid‐state ionics, but achieving high room‐temperature (RT) conductivity and strong thermal stability remains challenging, especially in systems where defect chemistry, clustering, and microstructure intricately influence ion transport. Here, we show that mechanochemical synthesis followed by hot pressing at 200–300°C yields a tysonite‐type Ca‐doped rare‐earth fluoride with high ionic conductivity at RT. Within this low‐temperature route, vacancy topology, c ‐axis lattice expansion, and grain‐boundary structure are optimized, resulting in a several‐order‐of‐magnitude increase in RT conductivity to ∼10 −4 −10 −5 S cm −1 and reduction of activation energy to ∼0.4 eV. Thermogravimetric analysis, combined with time‐resolved electrochemical impedance spectroscopy, indicates that conductivity fluctuations arise from changes in defect chemistry, particularly the formation of vacancies at the fluorine site. Hot pressing at 400°C results in vacancy clustering, c ‐axis collapse, and formation of intergranular glassy phases, sharply decreasing conductivity to ∼10 −9 S cm −1 and highlighting a trade‐off among processing, structure, and ion transport. Pellets pressed at 300°C show slow conductivity relaxation over 30–200 days under ambient conditions, indicating metastable defect dynamics and long‐term stabilization. These results demonstrate that near‐single‐crystal conductivity in polycrystalline tysonite fluorides can be approached by kinetic stabilization of anisotropic defect structure via low‐temperature thermomechanical processing.
- 15 June 2026
- Published by Wiley in Small Structures
- Vol. 7 (6)
Open AccessDefect‐Topology Control of Anisotropic Lattice Flexibility for High‐Performance Fluoride‐Ion Electrolytes
Fluoride‐ion conductors show promise for next‐generation solid‐state ionics, but achieving high room‐temperature (RT) conductivity and strong thermal stability remains challenging, especially in systems where defect chemistry, clustering, and microstructure intricately influence ion transport. Here, we show that mechanochemical synthesis followed by hot pressing at 200–300°C yields a tysonite‐type Ca‐doped rare‐earth fluoride with high ionic conductivity at RT. Within this low‐temperature route, vacancy topology, c ‐axis lattice expansion, and grain‐boundary structure are optimized, resulting in a several‐order‐of‐magnitude increase in RT conductivity to ∼10 −4 −10 −5 S cm −1 and reduction of activation energy to ∼0.4 eV. Thermogravimetric analysis, combined with time‐resolved electrochemical impedance spectroscopy, indicates that conductivity fluctuations arise from changes in defect chemistry, particularly the formation of vacancies at the fluorine site. Hot pressing at 400°C results in vacancy clustering, c ‐axis collapse, and formation of intergranular glassy phases, sharply decreasing conductivity to ∼10 −9 S cm −1 and highlighting a trade‐off among processing, structure, and ion transport. Pellets pressed at 300°C show slow conductivity relaxation over 30–200 days under ambient conditions, indicating metastable defect dynamics and long‐term stabilization. These results demonstrate that near‐single‐crystal conductivity in polycrystalline tysonite fluorides can be approached by kinetic stabilization of anisotropic defect structure via low‐temperature thermomechanical processing.
- Open Access
- 10 March 2026
- Published by Elsevier in SSRN Electronic Journal
Small Science Systems Should Stop Copying Big Ones
Small countries are encouraged to mimic large research systems by focusing on excellence and aligning with external priorities. This approach weakens their natural strengths in speed, risktaking, and originality, and risks making them irrelevant rather than innovative. Scale mismatch. For decades, small countries have been advised to follow a straightforward formula for scientific success: identifying the top research groups, concentrating resources around them, developing centers of excellence, and aligning national priorities with those of larger, more established research economies. Germany and the Netherlands are frequently cited as model countries that have combined strong institutions, stable funding, and long-term strategies to attain global scientific relevance. This advice may seem reasonable to small countries, but it is fundamentally manipulative. Science does not operate as a scale-free system. Strategies effective for large countries don't automatically apply to smaller ones. 1,2 Uncritically copying big-country science models can become a strategic mistake for smaller countries, gradually hindering their ability to innovate, take risks, and stay scientifically relevant. The hard truth is that models developed for large scales don't work the same way at smaller scales.
- 10 March 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessSmall Science Systems Should Stop Copying Big Ones
Small countries are encouraged to mimic large research systems by focusing on excellence and aligning with external priorities. This approach weakens their natural strengths in speed, risktaking, and originality, and risks making them irrelevant rather than innovative. Scale mismatch. For decades, small countries have been advised to follow a straightforward formula for scientific success: identifying the top research groups, concentrating resources around them, developing centers of excellence, and aligning national priorities with those of larger, more established research economies. Germany and the Netherlands are frequently cited as model countries that have combined strong institutions, stable funding, and long-term strategies to attain global scientific relevance. This advice may seem reasonable to small countries, but it is fundamentally manipulative. Science does not operate as a scale-free system. Strategies effective for large countries don't automatically apply to smaller ones. 1,2 Uncritically copying big-country science models can become a strategic mistake for smaller countries, gradually hindering their ability to innovate, take risks, and stay scientifically relevant. The hard truth is that models developed for large scales don't work the same way at smaller scales.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Water Research & Technology
Smart water, smart models: algorithmic assessment of water quality under evolving chemical and industrial stressors
Machine learning integrates routine monitoring, targeted PFAS and microplastic analyses, and hydrometeorological data to prioritize hotspots and guide predict-sample-verify cycles, enabling more focused interventions in stressed water systems.
- 1 January 2026
- Published by Royal Society of Chemistry (RSC) in Environmental Science: Water Research & Technology
Smart water, smart models: algorithmic assessment of water quality under evolving chemical and industrial stressors
Machine learning integrates routine monitoring, targeted PFAS and microplastic analyses, and hydrometeorological data to prioritize hotspots and guide predict-sample-verify cycles, enabling more focused interventions in stressed water systems.
- Open Access
- 30 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Smart Water, Smart Models: Algorithmic Assessment of Water Quality under Evolving Chemical and Industrial Stressors
The growing use of recycled materials and the expansion of chemical recycling activities are introducing new, poorly understood, and potentially hazardous pollutants into global water systems. This makes it harder to monitor, anticipate, and control. Machine learning (ML) offers unprecedented power to analyze heterogeneous aquatic datasets, infer pollutant dynamics, and support adaptive water treatment; yet its application remains primarily focused on conventional parameters. This review critically examines how advanced ML spanning deep neural networks, hybrid physics–data approaches, and reinforcement learning can anticipate and manage pollution from recycling-driven industrial processes, including microplastics, per- and polyfluoroalkyl substances (PFAS), textile dyes, and emerging solvents. We evaluate data-centric workflows derived from high-frequency sensors, remote sensing, and socio-hydrological indicators, with a focus on the challenges of data sparsity, uncertainty, and the evolving chemical space. Unlike prior reviews, we highlight the growing regulatory gap: models increasingly predict new risk scenarios but lack validation pathways compatible with chemical testing norms and policy instruments. We propose an integrated approach that combines interpretable ML, uncertainty quantification, and mechanistic coupling to support anticipatory governance from early warning systems to risk-based water quality standards. This synthesis positions ML not just as a computational upgrade, but also as a strategic tool to manage the next wave of anthropogenic pollutants emerging from circular-economy and advanced-recycling initiatives.
- 30 November 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessSmart Water, Smart Models: Algorithmic Assessment of Water Quality under Evolving Chemical and Industrial Stressors
The growing use of recycled materials and the expansion of chemical recycling activities are introducing new, poorly understood, and potentially hazardous pollutants into global water systems. This makes it harder to monitor, anticipate, and control. Machine learning (ML) offers unprecedented power to analyze heterogeneous aquatic datasets, infer pollutant dynamics, and support adaptive water treatment; yet its application remains primarily focused on conventional parameters. This review critically examines how advanced ML spanning deep neural networks, hybrid physics–data approaches, and reinforcement learning can anticipate and manage pollution from recycling-driven industrial processes, including microplastics, per- and polyfluoroalkyl substances (PFAS), textile dyes, and emerging solvents. We evaluate data-centric workflows derived from high-frequency sensors, remote sensing, and socio-hydrological indicators, with a focus on the challenges of data sparsity, uncertainty, and the evolving chemical space. Unlike prior reviews, we highlight the growing regulatory gap: models increasingly predict new risk scenarios but lack validation pathways compatible with chemical testing norms and policy instruments. We propose an integrated approach that combines interpretable ML, uncertainty quantification, and mechanistic coupling to support anticipatory governance from early warning systems to risk-based water quality standards. This synthesis positions ML not just as a computational upgrade, but also as a strategic tool to manage the next wave of anthropogenic pollutants emerging from circular-economy and advanced-recycling initiatives.
- Open Access
- 30 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (45) , 62871-62882
Efficient Defect-Driven Cation Exchange beyond the Nanoscale Semiconductors toward Antibacterial Functionalization
Defect engineering is an exciting tool for customizing semiconductors' structural and optoelectronic properties. Elaborating programmable methodologies to circumvent energy constraints in multievent inversions expands our understanding of the mechanisms governing the functionalization of nanomaterials. Herein, we introduce a novel strategy based on defect incorporation and solution rationalization, which triggers energetically unfavorable cation exchange reactions in extended solids. Using Sb2X3 + Ag (I) → Ag: Sb2X3 (X= S, Se) as a system to model, we demonstrate that incorporating chalcogen vacancies and AgSbVX complex defects into initial thin films (TFs) is crucial for activating long-range solid-state ion diffusion. Additional regulation of the Lewis acidity of auxiliary chemicals provides an exceptional conversion yield of the Ag precursor into a solid-state product up to 90%, simultaneously transforming upper matrix layers into AgSbX2. The proposed strategy enables tailoring radiative recombination processes, offers efficiency to invert TFs at moderate temperatures quickly, and yields structures of large areas with substantial antibacterial activity in visible light for a particular inversion system. Similar customization can be applied to most sulfides/selenides with controlled reaction yields.
- 30 October 2024
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 16 (45) , 62871-62882
Open AccessEfficient Defect-Driven Cation Exchange beyond the Nanoscale Semiconductors toward Antibacterial Functionalization
Defect engineering is an exciting tool for customizing semiconductors' structural and optoelectronic properties. Elaborating programmable methodologies to circumvent energy constraints in multievent inversions expands our understanding of the mechanisms governing the functionalization of nanomaterials. Herein, we introduce a novel strategy based on defect incorporation and solution rationalization, which triggers energetically unfavorable cation exchange reactions in extended solids. Using Sb2X3 + Ag (I) → Ag: Sb2X3 (X= S, Se) as a system to model, we demonstrate that incorporating chalcogen vacancies and AgSbVX complex defects into initial thin films (TFs) is crucial for activating long-range solid-state ion diffusion. Additional regulation of the Lewis acidity of auxiliary chemicals provides an exceptional conversion yield of the Ag precursor into a solid-state product up to 90%, simultaneously transforming upper matrix layers into AgSbX2. The proposed strategy enables tailoring radiative recombination processes, offers efficiency to invert TFs at moderate temperatures quickly, and yields structures of large areas with substantial antibacterial activity in visible light for a particular inversion system. Similar customization can be applied to most sulfides/selenides with controlled reaction yields.
- Open Access
- 29 January 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Efficient defect-driven cation exchange beyond the nanoscale semiconductors toward antibacterial functionalization
Defect engineering is an exciting tool for customizing semiconductors' structural and optoelectronic properties. Elaborating programmable methodologies to circumvent energy constraints in multievent inversions expands our understanding of mechanisms governing the functionalization of nanomaterials. Herein, we introduce a novel strategy based on defect incorporation and solution rationalization, which triggers energetically unfavorable cation exchange reactions in extended solids. Using Sb2X3 + Ag (I) → Ag: Sb2X3 (X = S, Se) as a system to model, we demonstrate that incorporating chalcogen vacancies and AgSbVX complex defects into initial thin films (TFs) is crucial for activating long-range solid-state ion diffusion. Additional regulation of the Lewis acidity of auxiliary chemicals provides exceptional conversion yield of the Ag precursor into a solid-state product up to 90%, simultaneously transforming upper matrix layers into AgSbX2. The proposed strategy enables tailoring radiative recombination processes, offers efficiency to invert TFs at moderate temperatures quickly, and yields structures of large areas with substantial antibacterial activity in visible light for a particular system considered. Similar customization can be applied to most sulfides and selenides with controlled reaction yields.
- 29 January 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessEfficient defect-driven cation exchange beyond the nanoscale semiconductors toward antibacterial functionalization
Defect engineering is an exciting tool for customizing semiconductors' structural and optoelectronic properties. Elaborating programmable methodologies to circumvent energy constraints in multievent inversions expands our understanding of mechanisms governing the functionalization of nanomaterials. Herein, we introduce a novel strategy based on defect incorporation and solution rationalization, which triggers energetically unfavorable cation exchange reactions in extended solids. Using Sb2X3 + Ag (I) → Ag: Sb2X3 (X = S, Se) as a system to model, we demonstrate that incorporating chalcogen vacancies and AgSbVX complex defects into initial thin films (TFs) is crucial for activating long-range solid-state ion diffusion. Additional regulation of the Lewis acidity of auxiliary chemicals provides exceptional conversion yield of the Ag precursor into a solid-state product up to 90%, simultaneously transforming upper matrix layers into AgSbX2. The proposed strategy enables tailoring radiative recombination processes, offers efficiency to invert TFs at moderate temperatures quickly, and yields structures of large areas with substantial antibacterial activity in visible light for a particular system considered. Similar customization can be applied to most sulfides and selenides with controlled reaction yields.
- Open Access
- 23 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (17) , 2898
Solution-Mediated Inversion of SnSe to Sb2Se3 Thin-Films
New facile and controllable approaches to fabricating metal chalcogenide thin films with adjustable properties can significantly expand the scope of these materials in numerous optoelectronic and photovoltaic devices. Most traditional and especially wet-chemical synthetic pathways suffer from a sluggish ability to regulate the composition and have difficulty achieving the high-quality structural properties of the sought-after metal chalcogenides, especially at large 2D length scales. In this effort, and for the first time, we illustrated the fast and complete inversion of continuous SnSe thin-films to Sb2Se3 using a scalable top-down ion-exchange approach. Processing in dense solution systems yielded the formation of Sb2Se3 films with favorable structural characteristics, while oxide phases, which are typically present in most Sb2Se3 films regardless of the synthetic protocols used, were eliminated. Density functional theory (DFT) calculations performed on intermediate phases show strong relaxations of the atomic lattice due to the presence of substitutional and vacancy defects, which likely enhances the mobility of cationic species during cation exchange. Our concept can be applied to customize the properties of other metal chalcogenides or manufacture layered structures.
- 23 August 2022
- Published by MDPI AG in Nanomaterials
- Vol. 12 (17) , 2898
Open AccessSolution-Mediated Inversion of SnSe to Sb2Se3 Thin-Films
New facile and controllable approaches to fabricating metal chalcogenide thin films with adjustable properties can significantly expand the scope of these materials in numerous optoelectronic and photovoltaic devices. Most traditional and especially wet-chemical synthetic pathways suffer from a sluggish ability to regulate the composition and have difficulty achieving the high-quality structural properties of the sought-after metal chalcogenides, especially at large 2D length scales. In this effort, and for the first time, we illustrated the fast and complete inversion of continuous SnSe thin-films to Sb2Se3 using a scalable top-down ion-exchange approach. Processing in dense solution systems yielded the formation of Sb2Se3 films with favorable structural characteristics, while oxide phases, which are typically present in most Sb2Se3 films regardless of the synthetic protocols used, were eliminated. Density functional theory (DFT) calculations performed on intermediate phases show strong relaxations of the atomic lattice due to the presence of substitutional and vacancy defects, which likely enhances the mobility of cationic species during cation exchange. Our concept can be applied to customize the properties of other metal chalcogenides or manufacture layered structures.
- Open Access
- 28 December 2020
- Published by MDPI AG in Nanomaterials
- Vol. 11 (1) , 52
A Novel Thermochemical Metal Halide Treatment for High-Performance Sb2Se3 Photocathodes
The fabrication of cost-effective photostable materials with optoelectronic properties suitable for commercial photoelectrochemical (PEC) water splitting represents a complex task. Herein, we present a simple route to produce Sb2Se3 that meets most of the requirements for high-performance photocathodes. Annealing of Sb2Se3 layers in a selenium-containing atmosphere persists as a necessary step for improving device parameters; however, it could complicate industrial processability. To develop a safe and scalable alternative to the selenium physical post-processing, we propose a novel SbCl3/glycerol-based thermochemical treatment for controlling anisotropy, a severe problem for Sb2Se3. Our procedure makes it possible to selectively etch antimony-rich oxyselenide presented in Sb2Se3, to obtain high-quality compact thin films with a favorable morphology, stoichiometric composition, and crystallographic orientation. The treated Sb2Se3 photoelectrode demonstrates a record photocurrent density of about 31 mA cm−2 at −248 mV against the calomel electrode and can thus offer a breakthrough option for industrial solar fuel fabrication.
- 28 December 2020
- Published by MDPI AG in Nanomaterials
- Vol. 11 (1) , 52
Open AccessA Novel Thermochemical Metal Halide Treatment for High-Performance Sb2Se3 Photocathodes
The fabrication of cost-effective photostable materials with optoelectronic properties suitable for commercial photoelectrochemical (PEC) water splitting represents a complex task. Herein, we present a simple route to produce Sb2Se3 that meets most of the requirements for high-performance photocathodes. Annealing of Sb2Se3 layers in a selenium-containing atmosphere persists as a necessary step for improving device parameters; however, it could complicate industrial processability. To develop a safe and scalable alternative to the selenium physical post-processing, we propose a novel SbCl3/glycerol-based thermochemical treatment for controlling anisotropy, a severe problem for Sb2Se3. Our procedure makes it possible to selectively etch antimony-rich oxyselenide presented in Sb2Se3, to obtain high-quality compact thin films with a favorable morphology, stoichiometric composition, and crystallographic orientation. The treated Sb2Se3 photoelectrode demonstrates a record photocurrent density of about 31 mA cm−2 at −248 mV against the calomel electrode and can thus offer a breakthrough option for industrial solar fuel fabrication.
- 1 May 2020
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 208
Visible light-assisted instability of kesterite Cu2ZnSnS4: What are the implications?
- 1 May 2020
- Published by Elsevier in Solar Energy Materials and Solar Cells
- Vol. 208
Visible light-assisted instability of kesterite Cu2ZnSnS4: What are the implications?