Vincent van Duinen
Research Subjects
Vincent van Duinen has a total of 57 co-authors. Here are the top co-authors by number of shared publications:
- Thomas Hankemeier
Leiden Academic Centre for Drug Research, Leiden University, Einsteinweg 55, 2333 CC Leiden, The Netherlands
6 shared publications Paul Vulto
Mimetas
4 shared publications- Paul Vulto
Mimetas BV, Oegstgeest, The Netherlands
3 shared publications - Anton Jan van Zonneveld
Department of Internal Medicine (Nephrology) and the Einthoven Laboratory for Vascular and Regenerative Medicine, Leiden University Medical Center, Leiden, The Netherlands
2 shared publications - Dorota Kurek
Mimetas BV, Leiden, The Netherlands
2 shared publications - Flavio Bonanini
MIMETAS BV, De Limes 7, Oegstgeest, Oegstgeest, 2342 DH, NETHERLANDS
2 shared publications
Latest Publications
- Open Access
- 24 October 2024
- Published by IOP Publishing in Biofabrication
- Vol. 17 (1) , 015007
A microvascularized in vitro liver model for disease modeling and drug discovery
Drug discovery for complex liver diseases faces alarming attrition rates. The lack of non-clinical models that recapitulate key aspects of liver (patho)-physiology is likely contributing to the inefficiency of developing effective treatments. Of particular notice is the common omission of an organized microvascular component despite its importance in maintaining liver function and its involvement in the development of several pathologies. Increasing the complexity of in vitro models is usually associated with a lack of scalability and robustness which hinders their implementation in drug development pipelines. Here, we describe a comprehensive liver microphysiological system comprising stellates, liver-derived endothelial cells and hepatocytes conceived within a scalable and automated platform. We show that endothelial cells self-organize in a microvascular network when co-cultured with stellates in a hydrogel. In a tri-culture, hepatocytes polarize accordingly, with a basolateral side facing blood vessels and an apical side facing bile-canaliculi-like structures. Stellates interact and surround the hollow microvessels. Steatosis was induced by exogenous administration of fatty acids which could be prevented by co-administration of firsocostat. Administration of TGF-β resulted in an activated stellate cells phenotype which could be prevented by the co-administration of SB-431542. The model was implemented on a microtiter plate format comprising 64 chips which enabled the development of a fully automated, multiplexed fibrosis assay with a robust Z’ factor suitable for high-throughput applications.
- 24 October 2024
- Published by IOP Publishing in Biofabrication
- Vol. 17 (1) , 015007
Open AccessA microvascularized in vitro liver model for disease modeling and drug discovery
Drug discovery for complex liver diseases faces alarming attrition rates. The lack of non-clinical models that recapitulate key aspects of liver (patho)-physiology is likely contributing to the inefficiency of developing effective treatments. Of particular notice is the common omission of an organized microvascular component despite its importance in maintaining liver function and its involvement in the development of several pathologies. Increasing the complexity of in vitro models is usually associated with a lack of scalability and robustness which hinders their implementation in drug development pipelines. Here, we describe a comprehensive liver microphysiological system comprising stellates, liver-derived endothelial cells and hepatocytes conceived within a scalable and automated platform. We show that endothelial cells self-organize in a microvascular network when co-cultured with stellates in a hydrogel. In a tri-culture, hepatocytes polarize accordingly, with a basolateral side facing blood vessels and an apical side facing bile-canaliculi-like structures. Stellates interact and surround the hollow microvessels. Steatosis was induced by exogenous administration of fatty acids which could be prevented by co-administration of firsocostat. Administration of TGF-β resulted in an activated stellate cells phenotype which could be prevented by the co-administration of SB-431542. The model was implemented on a microtiter plate format comprising 64 chips which enabled the development of a fully automated, multiplexed fibrosis assay with a robust Z’ factor suitable for high-throughput applications.
- Open Access
A microvascularized in vitro liver model for disease modeling and drug discovery
Drug discovery for complex liver diseases faces alarming attrition rates. The lack of non-clinical models that recapitulate key aspects of liver (patho)-physiology is likely contributing to the inefficiency of developing effective treatments. Of particular notice is the common omission of an organized microvascular component despite its importance in maintaining liver function and its involvement in the development of several pathologies. Increasing the complexity of in vitro models is usually associated with a lack of scalability and robustness which hinders their implementation in drug development pipelines. Here, we describe a comprehensive liver MPS model comprising stellates, liver-derived endothelial cells and hepatocytes conceived within a scalable and automated platform. We show that endothelial cells self-organize in a microvascular network when co-cultured with stellates in a hydrogel. In a tri-culture, hepatocytes polarize accordingly, with a basolateral side facing blood vessels and an apical side facing bile-canaliculi-like structures. Stellates interact and surround the hollow microvessels. Steatosis was induced by exogenous administration of fatty acids which could be prevented by co-administration of firsocostat. Administration of TGF-β resulted in an activated stellate cells phenotype which could be prevented by the co-administration of SB-431542. The model was implemented on a microtiter plate format comprising 64 chips which enabled the development of a fully automated, multiplexed fibrosis assay with a robust Z’ factor suitable for high-throughput applications.
Open AccessA microvascularized in vitro liver model for disease modeling and drug discovery
Drug discovery for complex liver diseases faces alarming attrition rates. The lack of non-clinical models that recapitulate key aspects of liver (patho)-physiology is likely contributing to the inefficiency of developing effective treatments. Of particular notice is the common omission of an organized microvascular component despite its importance in maintaining liver function and its involvement in the development of several pathologies. Increasing the complexity of in vitro models is usually associated with a lack of scalability and robustness which hinders their implementation in drug development pipelines. Here, we describe a comprehensive liver MPS model comprising stellates, liver-derived endothelial cells and hepatocytes conceived within a scalable and automated platform. We show that endothelial cells self-organize in a microvascular network when co-cultured with stellates in a hydrogel. In a tri-culture, hepatocytes polarize accordingly, with a basolateral side facing blood vessels and an apical side facing bile-canaliculi-like structures. Stellates interact and surround the hollow microvessels. Steatosis was induced by exogenous administration of fatty acids which could be prevented by co-administration of firsocostat. Administration of TGF-β resulted in an activated stellate cells phenotype which could be prevented by the co-administration of SB-431542. The model was implemented on a microtiter plate format comprising 64 chips which enabled the development of a fully automated, multiplexed fibrosis assay with a robust Z’ factor suitable for high-throughput applications.
- Open Access
- 7 July 2020
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 21 (13) , 4804
Robust and Scalable Angiogenesis Assay of Perfused 3D Human iPSC-Derived Endothelium for Anti-Angiogenic Drug Screening
To advance pre-clinical vascular drug research, in vitro assays are needed that closely mimic the process of angiogenesis in vivo. Such assays should combine physiological relevant culture conditions with robustness and scalability to enable drug screening. We developed a perfused 3D angiogenesis assay that includes endothelial cells (ECs) from induced pluripotent stem cells (iPSC) and assessed its performance and suitability for anti-angiogenic drug screening. Angiogenic sprouting was compared with primary ECs and showed that the microvessels from iPSC-EC exhibit similar sprouting behavior, including tip cell formation, directional sprouting and lumen formation. Inhibition with sunitinib, a clinically used vascular endothelial growth factor (VEGF) receptor type 2 inhibitor, and 3-(3-pyridinyl)-1-(4-pyridinyl)-2-propen-1-one (3PO), a transient glycolysis inhibitor, both significantly reduced the sprouting of both iPSC-ECs and primary ECs, supporting that both cell types show VEGF gradient-driven angiogenic sprouting. The assay performance was quantified for sunitinib, yielding a minimal signal window of 11 and Z-factor of at least 0.75, both meeting the criteria to be used as screening assay. In conclusion, we have developed a robust and scalable assay that includes physiological relevant culture conditions and is amenable to screening of anti-angiogenic compounds.
- 7 July 2020
- Published by MDPI AG in International Journal of Molecular Sciences
- Vol. 21 (13) , 4804
Open AccessRobust and Scalable Angiogenesis Assay of Perfused 3D Human iPSC-Derived Endothelium for Anti-Angiogenic Drug Screening
To advance pre-clinical vascular drug research, in vitro assays are needed that closely mimic the process of angiogenesis in vivo. Such assays should combine physiological relevant culture conditions with robustness and scalability to enable drug screening. We developed a perfused 3D angiogenesis assay that includes endothelial cells (ECs) from induced pluripotent stem cells (iPSC) and assessed its performance and suitability for anti-angiogenic drug screening. Angiogenic sprouting was compared with primary ECs and showed that the microvessels from iPSC-EC exhibit similar sprouting behavior, including tip cell formation, directional sprouting and lumen formation. Inhibition with sunitinib, a clinically used vascular endothelial growth factor (VEGF) receptor type 2 inhibitor, and 3-(3-pyridinyl)-1-(4-pyridinyl)-2-propen-1-one (3PO), a transient glycolysis inhibitor, both significantly reduced the sprouting of both iPSC-ECs and primary ECs, supporting that both cell types show VEGF gradient-driven angiogenic sprouting. The assay performance was quantified for sunitinib, yielding a minimal signal window of 11 and Z-factor of at least 0.75, both meeting the criteria to be used as screening assay. In conclusion, we have developed a robust and scalable assay that includes physiological relevant culture conditions and is amenable to screening of anti-angiogenic compounds.
- 6 November 2019
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 153,p. e59678
Standardized and Scalable Assay to Study Perfused 3D Angiogenic Sprouting of iPSC-derived Endothelial Cells In Vitro
Pre-clinical drug research of vascular diseases requires in vitro models of vasculature that are amendable to high-throughput screening. However, current in vitro screening models that have sufficient throughput only have limited physiological relevance, which hinders the translation of findings from in vitro to in vivo. On the other hand, microfluidic cell culture platforms have shown unparalleled physiological relevancy in vitro, but often lack the required throughput, scalability and standardization. We demonstrate a robust platform to study angiogenesis of endothelial cells derived from human induced pluripotent stem cells (iPSC-ECs) in a physiological relevant cellular microenvironment, including perfusion and gradients. The iPSC-ECs are cultured as 40 perfused 3D microvessels against a patterned collagen-1 scaffold. Upon the application of a gradient of angiogenic factors, important hallmarks of angiogenesis can be studied, including the differentiation into tip- and stalk cell and the formation of perfusable lumen. Perfusion with fluorescent tracer dyes enables the study of permeability during and after anastomosis of the angiogenic sprouts. In conclusion, this method shows the feasibility of iPSC-derived ECs in a standardized and scalable 3D angiogenic assay that combines physiological relevant culture conditions in a platform that has the required robustness and scalability to be integrated within the drug screening infrastructure.
- 6 November 2019
- Published by MyJove Corporation in Journal of Visualized Experiments
- No. 153,p. e59678
Standardized and Scalable Assay to Study Perfused 3D Angiogenic Sprouting of iPSC-derived Endothelial Cells In Vitro
Pre-clinical drug research of vascular diseases requires in vitro models of vasculature that are amendable to high-throughput screening. However, current in vitro screening models that have sufficient throughput only have limited physiological relevance, which hinders the translation of findings from in vitro to in vivo. On the other hand, microfluidic cell culture platforms have shown unparalleled physiological relevancy in vitro, but often lack the required throughput, scalability and standardization. We demonstrate a robust platform to study angiogenesis of endothelial cells derived from human induced pluripotent stem cells (iPSC-ECs) in a physiological relevant cellular microenvironment, including perfusion and gradients. The iPSC-ECs are cultured as 40 perfused 3D microvessels against a patterned collagen-1 scaffold. Upon the application of a gradient of angiogenic factors, important hallmarks of angiogenesis can be studied, including the differentiation into tip- and stalk cell and the formation of perfusable lumen. Perfusion with fluorescent tracer dyes enables the study of permeability during and after anastomosis of the angiogenic sprouts. In conclusion, this method shows the feasibility of iPSC-derived ECs in a standardized and scalable 3D angiogenic assay that combines physiological relevant culture conditions in a platform that has the required robustness and scalability to be integrated within the drug screening infrastructure.
- Open Access
- 18 July 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-17
Endothelial tip cells in vitro are less glycolytic and have a more flexible response to metabolic stress than non-tip cells
Formation of new blood vessels by differentiated endothelial tip cells, stalk cells, and phalanx cells during angiogenesis is an energy-demanding process. How these specialized endothelial cell phenotypes generate their energy, and whether there are differences between these phenotypes, is unknown. This may be key to understand their functions, as (1) metabolic pathways are essentially involved in the regulation of angiogenesis, and (2) a metabolic switch has been associated with angiogenic endothelial cell differentiation. With the use of Seahorse flux analyses, we studied metabolic pathways in tip cell and non-tip cell human umbilical vein endothelial cell populations. Our study shows that both tip cells and non-tip cells use glycolysis as well as mitochondrial respiration for energy production. However, glycolysis is significantly lower in tip cells than in non-tip cells. Additionally, tip cells have a higher capacity to respond to metabolic stress. Finally, in non-tip cells, blocking of mitochondrial respiration inhibits endothelial cell proliferation. In conclusion, our data demonstrate that tip cells are less glycolytic than non-tip cells and that both endothelial cell phenotypes can adapt their metabolism depending on microenvironmental circumstances. Our results suggest that a balanced involvement of metabolic pathways is necessary for both endothelial cell phenotypes for proper functioning during angiogenesis.
- 18 July 2019
- Published by Springer Nature in Scientific Reports
- Vol. 9 (1) , 1-17
Open AccessEndothelial tip cells in vitro are less glycolytic and have a more flexible response to metabolic stress than non-tip cells
Formation of new blood vessels by differentiated endothelial tip cells, stalk cells, and phalanx cells during angiogenesis is an energy-demanding process. How these specialized endothelial cell phenotypes generate their energy, and whether there are differences between these phenotypes, is unknown. This may be key to understand their functions, as (1) metabolic pathways are essentially involved in the regulation of angiogenesis, and (2) a metabolic switch has been associated with angiogenic endothelial cell differentiation. With the use of Seahorse flux analyses, we studied metabolic pathways in tip cell and non-tip cell human umbilical vein endothelial cell populations. Our study shows that both tip cells and non-tip cells use glycolysis as well as mitochondrial respiration for energy production. However, glycolysis is significantly lower in tip cells than in non-tip cells. Additionally, tip cells have a higher capacity to respond to metabolic stress. Finally, in non-tip cells, blocking of mitochondrial respiration inhibits endothelial cell proliferation. In conclusion, our data demonstrate that tip cells are less glycolytic than non-tip cells and that both endothelial cell phenotypes can adapt their metabolism depending on microenvironmental circumstances. Our results suggest that a balanced involvement of metabolic pathways is necessary for both endothelial cell phenotypes for proper functioning during angiogenesis.
- Open Access
- 31 August 2018
- Published by Springer Nature in Angiogenesis
- Vol. 22 (1) , 157-165
Perfused 3D angiogenic sprouting in a high-throughput in vitro platform
Angiogenic sprouting, the growth of new blood vessels from pre-existing vessels, is orchestrated by cues from within the cellular microenvironment, such as biochemical gradients and perfusion. However, many of these cues are missing in current in vitro models of angiogenic sprouting. We here describe an in vitro platform that integrates both perfusion and the generation of stable biomolecular gradients and demonstrate its potential to study more physiologically relevant angiogenic sprouting and microvascular stabilization. The platform consists of an array of 40 individually addressable microfluidic units that enable the culture of perfused microvessels against a three-dimensional collagen-1 matrix. Upon the introduction of a gradient of pro-angiogenic factors, the endothelial cells differentiated into tip cells that invaded the matrix. Continuous exposure resulted in continuous migration and the formation of lumen by stalk cells. A combination of vascular endothelial growth factor-165 (VEGF-165), phorbol 12-myristate 13-acetate (PMA), and sphingosine-1-phosphate (S1P) was the most optimal cocktail to trigger robust, directional angiogenesis with S1P being crucial for guidance and repetitive sprout formation. Prolonged exposure forces the angiogenic sprouts to anastomose through the collagen to the other channel. This resulted in remodeling of the angiogenic sprouts within the collagen: angiogenic sprouts that anastomosed with the other perfusion channel remained stable, while those who did not retracted and degraded. Furthermore, perfusion with 150 kDa FITC-Dextran revealed that while the angiogenic sprouts were initially leaky, once they fully crossed the collagen lane they became leak tight. This demonstrates that once anastomosis occurred, the sprouts matured and suggests that perfusion can act as an important survival and stabilization factor for the angiogenic microvessels. The robustness of this platform in combination with the possibility to include a more physiological relevant three-dimensional microenvironment makes our platform uniquely suited to study angiogenesis in vitro.
- 31 August 2018
- Published by Springer Nature in Angiogenesis
- Vol. 22 (1) , 157-165
Open AccessPerfused 3D angiogenic sprouting in a high-throughput in vitro platform
Angiogenic sprouting, the growth of new blood vessels from pre-existing vessels, is orchestrated by cues from within the cellular microenvironment, such as biochemical gradients and perfusion. However, many of these cues are missing in current in vitro models of angiogenic sprouting. We here describe an in vitro platform that integrates both perfusion and the generation of stable biomolecular gradients and demonstrate its potential to study more physiologically relevant angiogenic sprouting and microvascular stabilization. The platform consists of an array of 40 individually addressable microfluidic units that enable the culture of perfused microvessels against a three-dimensional collagen-1 matrix. Upon the introduction of a gradient of pro-angiogenic factors, the endothelial cells differentiated into tip cells that invaded the matrix. Continuous exposure resulted in continuous migration and the formation of lumen by stalk cells. A combination of vascular endothelial growth factor-165 (VEGF-165), phorbol 12-myristate 13-acetate (PMA), and sphingosine-1-phosphate (S1P) was the most optimal cocktail to trigger robust, directional angiogenesis with S1P being crucial for guidance and repetitive sprout formation. Prolonged exposure forces the angiogenic sprouts to anastomose through the collagen to the other channel. This resulted in remodeling of the angiogenic sprouts within the collagen: angiogenic sprouts that anastomosed with the other perfusion channel remained stable, while those who did not retracted and degraded. Furthermore, perfusion with 150 kDa FITC-Dextran revealed that while the angiogenic sprouts were initially leaky, once they fully crossed the collagen lane they became leak tight. This demonstrates that once anastomosis occurred, the sprouts matured and suggests that perfusion can act as an important survival and stabilization factor for the angiogenic microvessels. The robustness of this platform in combination with the possibility to include a more physiological relevant three-dimensional microenvironment makes our platform uniquely suited to study angiogenesis in vitro.
- Open Access
- 14 August 2018
- Published by Springer Nature in The AAPS Journal
- Vol. 20 (5) , 90
Nephrotoxicity and Kidney Transport Assessment on 3D Perfused Proximal Tubules
Proximal tubules in the kidney play a crucial role in reabsorbing and eliminating substrates from the body into the urine, leading to high local concentrations of xenobiotics. This makes the proximal...
- 14 August 2018
- Published by Springer Nature in The AAPS Journal
- Vol. 20 (5) , 90
Open AccessNephrotoxicity and Kidney Transport Assessment on 3D Perfused Proximal Tubules
Proximal tubules in the kidney play a crucial role in reabsorbing and eliminating substrates from the body into the urine, leading to high local concentrations of xenobiotics. This makes the proximal...
- Open Access
- 22 December 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 1-11
96 perfusable blood vessels to study vascular permeability in vitro
Current in vitro models to test the barrier function of vasculature are based on flat, two-dimensional monolayers. These monolayers do not have the tubular morphology of vasculature found in vivo and lack important environmental cues from the cellular microenvironment, such as interaction with an extracellular matrix (ECM) and exposure to flow. To increase the physiological relevance of in vitro models of the vasculature, it is crucial to implement these cues and better mimic the native three-dimensional vascular architecture. We established a robust, high-throughput method to culture endothelial cells as 96 three-dimensional and perfusable microvessels and developed a quantitative, real-time permeability assay to assess their barrier function. Culture conditions were optimized for microvessel formation in 7 days and were viable for over 60 days. The microvessels exhibited a permeability to 20 kDa dextran but not to 150 kDa dextran, which mimics the functionality of vasculature in vivo. Also, a dose-dependent effect of VEGF, TNFα and several cytokines confirmed a physiologically relevant response. The throughput and robustness of this method and assay will allow end-users in vascular biology to make the transition from two-dimensional to three-dimensional culture methods to study vasculature.
- 22 December 2017
- Published by Springer Nature in Scientific Reports
- Vol. 7 (1) , 1-11
Open Access96 perfusable blood vessels to study vascular permeability in vitro
Current in vitro models to test the barrier function of vasculature are based on flat, two-dimensional monolayers. These monolayers do not have the tubular morphology of vasculature found in vivo and lack important environmental cues from the cellular microenvironment, such as interaction with an extracellular matrix (ECM) and exposure to flow. To increase the physiological relevance of in vitro models of the vasculature, it is crucial to implement these cues and better mimic the native three-dimensional vascular architecture. We established a robust, high-throughput method to culture endothelial cells as 96 three-dimensional and perfusable microvessels and developed a quantitative, real-time permeability assay to assess their barrier function. Culture conditions were optimized for microvessel formation in 7 days and were viable for over 60 days. The microvessels exhibited a permeability to 20 kDa dextran but not to 150 kDa dextran, which mimics the functionality of vasculature in vivo. Also, a dose-dependent effect of VEGF, TNFα and several cytokines confirmed a physiologically relevant response. The throughput and robustness of this method and assay will allow end-users in vascular biology to make the transition from two-dimensional to three-dimensional culture methods to study vasculature.
- Top Cited PapersOpen Access
- 1 December 2015
- Published by Elsevier in Current Opinion in Biotechnology
- Vol. 35, 118-126
Microfluidic 3D cell culture: from tools to tissue models
- 1 December 2015
- Published by Elsevier in Current Opinion in Biotechnology
- Vol. 35, 118-126
Top Cited PapersOpen AccessMicrofluidic 3D cell culture: from tools to tissue models
- 3 June 2014
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 86 (16) , 8048-8056
Continuous-Flow Microelectroextraction for Enrichment of Low Abundant Compounds
We present a continuous-flow microelectroextraction flow cell that allows for electric field enhanced extraction of analytes from a large volume (1 mL) of continuously flowing donor phase into a micro volume of stagnant acceptor phase (13.4 μL). We demonstrate for the first time that the interface between the stagnant acceptor phase and fast-flowing donor phase can be stabilized by a phaseguide. Chip performance was assessed by visual experiments using crystal violet. Then, extraction of a mixture of acylcarnitines was assessed by off-line coupling to reversed phase liquid chromatography coupled to time-of-flight mass spectrometry, resulting in concentration factors of 80.0 ± 9.2 times for hexanoylcarnitine, 73.8 ± 9.1 for octanoylcarnitine, and 34.1 ± 4.7 times for lauroylcarnitine, corresponding to recoveries of 107.8 ± 12.3%, 98.9 ± 12.3%, and 45.7 ± 6.3%, respectively, in a sample of 500 μL delivered at a flow of 50 μL min–1 under an extraction voltage of 300 V. Finally, the method was applied to the analysis of acylcarnitines spiked to urine, resulting in detection limits as low as 0.3–2 nM. Several putative endogenous acylcarnitines were found. The current flowing-to-stagnant phase microelectroextraction setup allows for the extraction of milliliter range volumes and is, as a consequence, very suited for analysis of low-abundant metabolites.
- 3 June 2014
- Published by American Chemical Society (ACS) in Analytical Chemistry
- Vol. 86 (16) , 8048-8056
Continuous-Flow Microelectroextraction for Enrichment of Low Abundant Compounds
We present a continuous-flow microelectroextraction flow cell that allows for electric field enhanced extraction of analytes from a large volume (1 mL) of continuously flowing donor phase into a micro volume of stagnant acceptor phase (13.4 μL). We demonstrate for the first time that the interface between the stagnant acceptor phase and fast-flowing donor phase can be stabilized by a phaseguide. Chip performance was assessed by visual experiments using crystal violet. Then, extraction of a mixture of acylcarnitines was assessed by off-line coupling to reversed phase liquid chromatography coupled to time-of-flight mass spectrometry, resulting in concentration factors of 80.0 ± 9.2 times for hexanoylcarnitine, 73.8 ± 9.1 for octanoylcarnitine, and 34.1 ± 4.7 times for lauroylcarnitine, corresponding to recoveries of 107.8 ± 12.3%, 98.9 ± 12.3%, and 45.7 ± 6.3%, respectively, in a sample of 500 μL delivered at a flow of 50 μL min–1 under an extraction voltage of 300 V. Finally, the method was applied to the analysis of acylcarnitines spiked to urine, resulting in detection limits as low as 0.3–2 nM. Several putative endogenous acylcarnitines were found. The current flowing-to-stagnant phase microelectroextraction setup allows for the extraction of milliliter range volumes and is, as a consequence, very suited for analysis of low-abundant metabolites.