NKNilhan Kayaman-Apohan

Nilhan Kayaman-Apohan

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nilhan Kayaman-Apohan has a total of 95 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Sustainable dynamic crosslinked networks based on thiol–ene/thiol–anhydride click chemistry

    by Eda Gaş, Yasin Bodur, Burcu Oktay, Nilhan Kayaman‐Apohan

    Photo‐cured coatings are attracting a lot of attention because they offer several advantages: they use less energy, release fewer harmful volatile organic compounds, require lower initial investment, and cure quickly even at room temperature. Recently, there has been an increase in the use of vegetable oils in these coatings. This is because vegetable oils are renewable, have low toxicity, are highly versatile, and their triglyceride structure can be easily integrated into the coating's structure. In this paper, linseed oil, an eco‐friendly vegetable oil known for its high reactivity due to the presence of a high degree of linolenic moieties, is used. First, it is epoxidized and then acrylated through a ring‐opening process with acrylic acid monomer. Furthermore, a monomer containing both thiol and carboxylic acid functional groups is prepared from 1,6‐hexanedithiol and maleic anhydride. Vegetable‐oil‐based crosslinked films are obtained by photoinitiated thiol–ene click chemistry from the acrylated linseed oil and bis‐thiol terminated thioester. The resulting films are then heated at 120 °C for 1 and 24 h. The thermally, spontaneous and catalyst‐free reversibility of thioester–anhydride bonds enables the reconfiguration of the crosslinked thermoset thiol–ene network. This dynamic rearrangement contributes to enhanced thermal, mechanical and physical properties of the material. Such a dynamic chemistry approach paves the way for the development of functional materials capable of reshaping and reprocessing. © 2026 Society of Chemical Industry.

  • Flame retardant bio-based hybrid films reinforced with sustainable additives: Capparis spinosa and phytic acid synergy

    by Çiğdem Gül, Burcu Oktay, Nilhan Kayaman Apohan, Emine Dilara Koçak

  • From Linseed Oil to Smart NIPU Polymers: Sustainable, Reprocessable, Self‐Healing Coatings

    by Emel Atılal, Nilhan Kayaman Apohan

    In this study, a series of bio‐based, self‐healing non‐isocyanate polyurethane (NIPU) elastomers were synthesized using epoxidized linseed oil, Priamine 1071, disulfide‐containing 4‐APDS, and cyclic carbonated GTGE (CCGTGE). Cyclic carbonate intermediates were successfully obtained and subsequently reacted with various multifunctional amines to generate crosslinked NIPU networks with tunable compositions. The structural and thermal characteristics of the materials were evaluated by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance (NMR), thermogravimetric analysis (TGA), differential scanning calorimetry (DSC) analyses and dynamic mechanical analysis (DMA). Mechanical properties varied depending on crosslinking density, with higher CCGTGE content leading to increased stiffness and thermal resistance but reduced elasticity. Scanning electron microscope (SEM) imaging supported the observed mechanical trends by revealing differences in fracture surface morphology across formulations. Reprocessability was investigated via hot press cycling, and reprocessing efficiency was calculated based on elongation at break values. Samples containing disulfide linkages demonstrated superior recovery upon reprocessing, underlining the role of dynamic covalent bonds in promoting closed‐loop recyclability. These findings demonstrate a promising approach for designing sustainable, recyclable NIPU‐based coatings.


  • Open Access

    Partially Biobased Self‐Repairing Poly(Aspartic Ester Polyurea) Coatings

    by Sevilay Dural, Sebnem Camadanlı, Nilhan Kayaman Apohan

    Poly(aspartic ester polyurea) (PAEU) coating systems, which feature an uncatalyzed and solventless reaction, have attracted attention as a more environmentally friendly, nonreactive coating alternative in both academia and industry. In these coatings, achieving optimal performance requires an impeccable combination of aliphatic polyisocyanates and polyaspartic esters used as cross‐linking agents. In previous applications, petroleum‐based polyisocyanates were used as the second component. In this study, a biobased prepolymer was synthesized as the second component, thus creating a sustainable PAEU coating class without compromising traditional properties. It is known that traditional coatings can become damaged or cracked when exposed to external forces during processing or use. The coatings achieved the self‐healing feature by using varying amounts of disulfide to improve this situation. The samples were deliberately damaged and then allowed to heal for 1 h at room temperature, 40°C, and 80°C. The results demonstrated improved mechanical properties in all samples. Tensile strength increased by 79%–95%, and elongation recovery rates ranged from 73% to 97% after 1 h of room‐temperature repair. These mechanical test results were consistent with the SEM images for all samples.


  • Open Access

    Investigation of Curcumin-β-Cyclodextrin Complex Release in Injectable Hyaluronic Acid/Quince Seed Gum Hydrogel

    by Serdar Kolay, Nilhan Kayaman Apohan, Erdinç Babuç, Gökay Gün

    Injectable hydrogels play a crucial role in various biomedical applications, serving as fillers in tissue engineering, facilitating cell repair, and contributing to the development of drug delivery systems. This study aims to investigate the release of dissolved curcumin from a new injectable hyaluronic acid/quince seed gum (HA/QSG) hydrogel. Curcumin possesses numerous biological activities, including anti-cancer, antioxidant, antimicrobial, and anti-inflammatory properties. However, due to its very low water solubility, its bioavailability is poor. To address this, curcumin was encapsulated in three inclusion complexes: Cur 1:2 β-CD, Cur 1:4 β-CD, and Cur 1:6 β-CD. These Cur-β-CD inclusion complexes were lyophilized and converted into a water-soluble form. The curcumin, bisdemethoxycurcumin, and desmethoxycurcumin content of the obtained lyophilized Cur-β-CD complexes were analyzed using the HPLC method. HA-QSG hydrogels were loaded with Cur 1:2 β-CD inclusion complex in compositions of 0.75% (w/w), 0.50% (w/w), and 0.25% (w/w). The dissolution profiles of the HA-QSG hydrogels were examined in a pH 6.8 phosphate buffer medium, used as the swelling medium in intra-articular hydrogels. The initial burst of the 0.75% (w/w) hydrogel reached 9% release within the first 15 min, whereas the 0.25% (w/w) hydrogel exhibited only 6% release during the same period. The 0.75%(w/w) and 0.50% (w/w) hydrogels displayed very similar dissolution profiles, with a slightly faster release in the early stages of dissolutions, compared to the 0.25%(w/w) Cur β-CD-HA-QSG hydrogel. The 0.25%(w/w) Cur β-CD-HA-QSG hydrogel demonstrated a relatively slower release rate particularly during the initial stage of dissolution period. However, all three formulations reached approximately 98% release within 24 h. While the 0.75%(w/w) and 0.50%(w/w) curcumin-loaded HA-QSG hydrogels, with their rapid initial release, may be suited for intra-articular applications requiring quick drug availability, the 0.25%(w/w) curcumin-loaded HA-QSG hydrogel, with its slower release, may be more beneficial for sustained intra-articular delivery. Graphical Abstract


  • Open Access

    Design and evaluation of MOF ‐containing PCM materials for energy storage in textile applications

    by İnCi Cenik, Burcu Oktay, Belma Gjergjizi Nallbani, Nilhan Kayaman‐Apohan

    This study focuses on the successful incorporation of stearyl methacrylate (SMA)/glycidyl methacrylate (GMA) copolymer, together with paraffin, into metal–organic framework (MOF) structures. These structures were prepared using a simple and cost‐effective process as an alternative to challenging process conditions such as encapsulation. One of the biggest issues encountered in phase change materials (PCMs), the leakage problem, has been effectively eliminated thanks to this MOF structure. Results showed that the melting enthalpy increased from 50 to 119 J/g by increasing the amount of polymer and paraffin in the ZIF‐NH 2 structure. It was observed that the PCMs applied to textiles exhibited resistance to flow at elevated temperatures. As a result of epoxy‐amine reactions between the polymer and ZIF‐NH 2 , covalent binding was achieved on the textile surface, and no leakage was detected when the fabrics were heated up to 90°C at specific compositions. The incorporation of regular glycidyl functional groups into the structure facilitates their attachment to the textile surface without requiring additional components. In contrast, the long stearyl groups significantly enhance the thermal energy storage capacity. With a contact angle above 100°, the PCM coating also contributed to the formation of a hydrophobic fabric surface. These materials provide thermal comfort by dynamically responding to environmental temperature changes. This feature enables their use in smart textile applications as functional textile products requiring energy management. Highlights: ZIF/poly(GMA‐co‐SMA) based PCMs were prepared. PCMs were covalently bonded to ZIF via epoxy‐amine reactions. PCMs were impregnated into textile materials. The fabrics exhibited a melting enthalpy of 50–119 J/g without leakage. The materials contribute to the advancement of smart textile applications.