Jeng-Lung Chen
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Jeng-Lung Chen has a total of 489 co-authors. Here are the top co-authors by number of shared publications:
Chih-Wen Pao
13 shared publicationsWei-Hsiang Huang
National Synchrotron Radiation Research Center, Science-Based Industrial Park, Hsinchu 30076, Taiwan, Republic of China
8 shared publications- Chi-Liang Chen
National Synchrotron Radiation Research Center
7 shared publications - Chung-Li Dong
Department of Physics Tamkang University New Taipei City Taiwan
7 shared publications - Jin-Ming Chen
Department of Electrophysics, National Yang Ming Chiao Tung University (NYCU), Hsinchu, Taiwan
5 shared publications - Chih-Wen Pao
National Synchrotron Radiation Research Center
4 shared publications
Latest Publications
- Open Access
- 18 February 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Electrocatalytic C(sp3)-H bond functionalization using biomass-derived electrodes
Organic electrosynthesis is a versatile and evergreen tool for constructing chemical compounds. However, the study of highly active electrodes has not received enough attention, which limits the further development of organic electrosynthesis. This work introduces a bottom-up route to prepare chitin-derived composite carbon aerogel electrodes (CCAEs), which can be directly used as electrodes in organic electrosynthesis systems. Various metal nanoparticles, such as Pt, Pd, RuO2, Cu and Ni, are well confined in these free-standing and porous CCAEs (M-CCAEs). The linear sweep voltammetry and in-situ Raman tests under electrochemical conditions show that RuO2-CCAEs possess good electrochemical oxidation ability for chlorine anions and good stabilizing effect on the generated chlorine radicals, which can serve as a mediator for the electrochemical C(sp3)-H activation. The combination of M-CCAEs with mediators achieves a series of electrochemical oxidative C(sp3)-H chlorination, bromination, nitration and etherification. Moreover, M-CCAEs promote the electrochemical hydrogen isotope exchange reaction of some important drug molecule structures, such as Ibuprofen, Diclofenac and Zolpidem.
- 18 February 2026
- Published by Springer Nature in Nature Communications
- Vol. 17 (1)
Open AccessElectrocatalytic C(sp3)-H bond functionalization using biomass-derived electrodes
Organic electrosynthesis is a versatile and evergreen tool for constructing chemical compounds. However, the study of highly active electrodes has not received enough attention, which limits the further development of organic electrosynthesis. This work introduces a bottom-up route to prepare chitin-derived composite carbon aerogel electrodes (CCAEs), which can be directly used as electrodes in organic electrosynthesis systems. Various metal nanoparticles, such as Pt, Pd, RuO2, Cu and Ni, are well confined in these free-standing and porous CCAEs (M-CCAEs). The linear sweep voltammetry and in-situ Raman tests under electrochemical conditions show that RuO2-CCAEs possess good electrochemical oxidation ability for chlorine anions and good stabilizing effect on the generated chlorine radicals, which can serve as a mediator for the electrochemical C(sp3)-H activation. The combination of M-CCAEs with mediators achieves a series of electrochemical oxidative C(sp3)-H chlorination, bromination, nitration and etherification. Moreover, M-CCAEs promote the electrochemical hydrogen isotope exchange reaction of some important drug molecule structures, such as Ibuprofen, Diclofenac and Zolpidem.
- 16 February 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (22) , 13606-13612
Redox-mediated origin of Fe–Ni synergy in oxygen evolution catalysis
Fe-Ni layered hydroxides are among the most active oxygen evolution reaction (OER) catalysts, yet the mechanistic origin of their long-recognized synergy remains under debate. Here, we report a solution-phase strategy that decouples structural Fe incorporation from redox mediation by introducing a soluble Fe3+ -triethanolamine (Fe3+(TEA)) complex into alkaline electrolytes. Electrochemical measurements reveal the generation of highly oxidizing Fe redox states at potentials below the Ni2+/Ni3+ transition, enabling redox-mediated activation of Ni sites without lattice doping. Operando Ni K-edge X-ray absorption spectroscopy demonstrates that Fe-mediated oxidation promotes the transformation of β-NiOOH into catalytically active γ-NiOOH at reduced overpotentials. Coulometric titration further quantifies an average transfer of ~1.6 electrons per Ni atom in the presence of Fe3+(TEA), establishing a quantitative link between redox mediation and Ni oxidation. These results identify redox mediation as the governing origin of Fe-Ni synergy in OER catalysis and provide a general framework for engineering multimetallic electrocatalysts through solution-phase redox control.
- 16 February 2026
- Published by Royal Society of Chemistry (RSC) in Journal of Materials Chemistry A
- Vol. 14 (22) , 13606-13612
Redox-mediated origin of Fe–Ni synergy in oxygen evolution catalysis
Fe-Ni layered hydroxides are among the most active oxygen evolution reaction (OER) catalysts, yet the mechanistic origin of their long-recognized synergy remains under debate. Here, we report a solution-phase strategy that decouples structural Fe incorporation from redox mediation by introducing a soluble Fe3+ -triethanolamine (Fe3+(TEA)) complex into alkaline electrolytes. Electrochemical measurements reveal the generation of highly oxidizing Fe redox states at potentials below the Ni2+/Ni3+ transition, enabling redox-mediated activation of Ni sites without lattice doping. Operando Ni K-edge X-ray absorption spectroscopy demonstrates that Fe-mediated oxidation promotes the transformation of β-NiOOH into catalytically active γ-NiOOH at reduced overpotentials. Coulometric titration further quantifies an average transfer of ~1.6 electrons per Ni atom in the presence of Fe3+(TEA), establishing a quantitative link between redox mediation and Ni oxidation. These results identify redox mediation as the governing origin of Fe-Ni synergy in OER catalysis and provide a general framework for engineering multimetallic electrocatalysts through solution-phase redox control.
- Open Access
- 29 January 2026
- Published by Wiley in Advanced Science
- Vol. 13 (20) , e24014
Harnessing Transformation of Metal‐Ligand Coordination in Dinuclear Ni(II)‐Schiff Base Coordination Polymer for Promoting Electrochemical Oxygen Evolution
One of the major challenges in overall water splitting is improving the sluggish kinetics of the anodic oxygen evolution reaction (OER). Various 3d transition metal oxides, hydroxides, and complexes have been investigated as cost‐effective OER electrocatalysts. Herein, a novel type of Ni‐based coordination polymer, [Ni 2 (tmd) 2 ] n , containing six‐coordinate Ni centers (two Ni─O and four Ni─N bonds) was synthesized. It acts as a pre‐catalyst for alkaline OER, undergoing structural transformation in KOH into [Ni 2 (tmd) 2 ] n ‐OH with five‐coordinate Ni centers, and further into the catalytically active state [Ni 2 (tmd) 2 ] n ‐CV after 150 cycles of cyclic voltammetry (CV). Under Fe‐depleted alkaline conditions (KOH, pH = 13.8), [Ni 2 (tmd) 2 ] n ‐CV exhibited outstanding OER performance, with overpotentials of η 10 = 222 mV and η 50 = 385 mV, a Tafel slope of 94.15 mV/dec, and a charge‐transfer resistance (R ct ) of 3.1 Ω, lower than those of NiPc, RuO 2 , and NiO. The catalyst also manifested excellent durability, with only a 6.1% drop in current density after 100 h of operation. X‐ray absorption and emission spectroscopies revealed its structural changes at different applied potentials. These changes are attributed to adsorption of oxygen species at the five‐coordinate Ni sites, potentially associated with Ni–OOH intermediates forming during OER.
- 29 January 2026
- Published by Wiley in Advanced Science
- Vol. 13 (20) , e24014
Open AccessHarnessing Transformation of Metal‐Ligand Coordination in Dinuclear Ni(II)‐Schiff Base Coordination Polymer for Promoting Electrochemical Oxygen Evolution
One of the major challenges in overall water splitting is improving the sluggish kinetics of the anodic oxygen evolution reaction (OER). Various 3d transition metal oxides, hydroxides, and complexes have been investigated as cost‐effective OER electrocatalysts. Herein, a novel type of Ni‐based coordination polymer, [Ni 2 (tmd) 2 ] n , containing six‐coordinate Ni centers (two Ni─O and four Ni─N bonds) was synthesized. It acts as a pre‐catalyst for alkaline OER, undergoing structural transformation in KOH into [Ni 2 (tmd) 2 ] n ‐OH with five‐coordinate Ni centers, and further into the catalytically active state [Ni 2 (tmd) 2 ] n ‐CV after 150 cycles of cyclic voltammetry (CV). Under Fe‐depleted alkaline conditions (KOH, pH = 13.8), [Ni 2 (tmd) 2 ] n ‐CV exhibited outstanding OER performance, with overpotentials of η 10 = 222 mV and η 50 = 385 mV, a Tafel slope of 94.15 mV/dec, and a charge‐transfer resistance (R ct ) of 3.1 Ω, lower than those of NiPc, RuO 2 , and NiO. The catalyst also manifested excellent durability, with only a 6.1% drop in current density after 100 h of operation. X‐ray absorption and emission spectroscopies revealed its structural changes at different applied potentials. These changes are attributed to adsorption of oxygen species at the five‐coordinate Ni sites, potentially associated with Ni–OOH intermediates forming during OER.
- Open Access
- 3 November 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (2) , 1073-1097
Magneto-voltaic activity of single-atom iron on reduced graphene oxide for magneto-catalytic conversion of H 2 O 2 into O 2
Combination of AMF as a physical stimulus, single-atom Fe on rGO (FeSA:rGO) as the catalytic active center on a magneto-sensitizer, and H 2 O 2 as dual reductant and oxidant demonstrated a magneto-catalytic process driven by magneto-voltaic activity.
- 3 November 2025
- Published by Royal Society of Chemistry (RSC) in Chemical Science
- Vol. 17 (2) , 1073-1097
Open AccessMagneto-voltaic activity of single-atom iron on reduced graphene oxide for magneto-catalytic conversion of H 2 O 2 into O 2
Combination of AMF as a physical stimulus, single-atom Fe on rGO (FeSA:rGO) as the catalytic active center on a magneto-sensitizer, and H 2 O 2 as dual reductant and oxidant demonstrated a magneto-catalytic process driven by magneto-voltaic activity.
- Open Access
- 10 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Magneto-voltaic Activity of Single-atom Iron on Reduced Graphene Oxide for Magneto-catalytic Conversion of H2O2 into O2
Recent advances in magnetically enhanced (electro)catalysis have disclosed the potential of magnetic fields to modulate reaction kinetics and catalytic performance. Herein, a combination of alternating magnetic field (AMF) as a physical stimulus, reduced graphene oxide (rGO) as a magneto-sensitizer, single-atom Fe on rGO (FeSA:rGO) as the catalytic active site, and H2O2 as dual reductant and oxidant demonstrated a proof-of-concept magneto-catalytic process that is thermodynamically driven solely by magneto-voltaic activity. Upon application of AMF to electroconductive FeSA:rGO, AMF-induced charge separation led to formation of low-lying electron holes (EHOMO = 2.41/2.43 eV) and excited electrons (ELUMO = -0.65/-0.57 eV), which triggered AMF power-dependent magneto-voltaic and magneto-electric activity (0.19-1.56 V and 0.15-0.62 mA). In the presence of H2O2, these AMF-induced low-lying electron holes in FeSA:rGO promoted oxidation of Fe3+ resting state leading to transient formation of a high-valent Fe4+ species, which served as a critical intermediate for magneto-catalytic oxidation of H2O2 and evolution of O2. Furthermore, kinetic study unveiled that FeSA:rGO concentration, H2O2 concentration, and AMF power played key roles in controlling the rates for FeSA:rGO-mediated magneto-catalytic oxygen evolution reaction. Consequently, these investigations established a mechanistic foundation for the future development of magneto-catalytic systems by integrating AMF-responsive magneto-sensitizers with diverse catalytic active sites.
- 10 September 2025
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessMagneto-voltaic Activity of Single-atom Iron on Reduced Graphene Oxide for Magneto-catalytic Conversion of H2O2 into O2
Recent advances in magnetically enhanced (electro)catalysis have disclosed the potential of magnetic fields to modulate reaction kinetics and catalytic performance. Herein, a combination of alternating magnetic field (AMF) as a physical stimulus, reduced graphene oxide (rGO) as a magneto-sensitizer, single-atom Fe on rGO (FeSA:rGO) as the catalytic active site, and H2O2 as dual reductant and oxidant demonstrated a proof-of-concept magneto-catalytic process that is thermodynamically driven solely by magneto-voltaic activity. Upon application of AMF to electroconductive FeSA:rGO, AMF-induced charge separation led to formation of low-lying electron holes (EHOMO = 2.41/2.43 eV) and excited electrons (ELUMO = -0.65/-0.57 eV), which triggered AMF power-dependent magneto-voltaic and magneto-electric activity (0.19-1.56 V and 0.15-0.62 mA). In the presence of H2O2, these AMF-induced low-lying electron holes in FeSA:rGO promoted oxidation of Fe3+ resting state leading to transient formation of a high-valent Fe4+ species, which served as a critical intermediate for magneto-catalytic oxidation of H2O2 and evolution of O2. Furthermore, kinetic study unveiled that FeSA:rGO concentration, H2O2 concentration, and AMF power played key roles in controlling the rates for FeSA:rGO-mediated magneto-catalytic oxygen evolution reaction. Consequently, these investigations established a mechanistic foundation for the future development of magneto-catalytic systems by integrating AMF-responsive magneto-sensitizers with diverse catalytic active sites.
- 5 September 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 658
Structural symmetry and regular octahedral atomic coordination in nanostructured NiMoO3 for supercapacitor electrode applications
- 5 September 2025
- Published by Elsevier in Journal of Power Sources
- Vol. 658
Structural symmetry and regular octahedral atomic coordination in nanostructured NiMoO3 for supercapacitor electrode applications
- Open Access
- 5 August 2025
- Published by Elsevier in Next Materials
- Vol. 9
One-step solvothermal construction of 2D CoFe dual-MOF nanosheets for synergistically enhanced oxygen evolution reaction
- 5 August 2025
- Published by Elsevier in Next Materials
- Vol. 9
Open AccessOne-step solvothermal construction of 2D CoFe dual-MOF nanosheets for synergistically enhanced oxygen evolution reaction
- Top Cited Papers
- 1 May 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 388 (6746) , 514-519
Formation of hydrided Pt-Ce-H sites in efficient, selective oxidation catalysts
Single-atom site catalysts can improve the rates and selectivity of many catalytic reactions. We have modified Pt 1 /CeO 2 single sites by combining them with molecular groups and with oxygen vacancies of the support. The new sites include hydrided (Pt 2+ -Ce 3+ H δ− ) and hydroxylated (Pt 2+ -Ce 3+ OH) sites that exhibit higher reactivity and selectivity to previous single sites for several reactions, including a ninefold increase in the reaction rate for carbon monoxide oxidation and a 2.3-fold improvement of propylene selectivity for oxidative dehydrogenation of propane. The atomic structure and reaction steps of these sites were determined with in situ and ex situ spectroscopy techniques and theoretical methods.
- 1 May 2025
- Published by American Association for the Advancement of Science (AAAS) in Science
- Vol. 388 (6746) , 514-519
Top Cited PapersFormation of hydrided Pt-Ce-H sites in efficient, selective oxidation catalysts
Single-atom site catalysts can improve the rates and selectivity of many catalytic reactions. We have modified Pt 1 /CeO 2 single sites by combining them with molecular groups and with oxygen vacancies of the support. The new sites include hydrided (Pt 2+ -Ce 3+ H δ− ) and hydroxylated (Pt 2+ -Ce 3+ OH) sites that exhibit higher reactivity and selectivity to previous single sites for several reactions, including a ninefold increase in the reaction rate for carbon monoxide oxidation and a 2.3-fold improvement of propylene selectivity for oxidative dehydrogenation of propane. The atomic structure and reaction steps of these sites were determined with in situ and ex situ spectroscopy techniques and theoretical methods.
- 24 March 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (18) , e2418797
Resolving Dynamic Behavior of Electrocatalysts via Advances of Operando X‐Ray Absorption Spectroscopies: Potential Artifacts and Practical Guidelines
Although numerous techniques are developed to enable real‐time understanding of dynamic interactions at the solid–liquid interface during electrochemical reactions, further progress in the development of these methods over the last several decades has faced challenges. With the rapid development of high‐brilliance synchrotron sources, operando X‐ray spectroscopies have become increasingly popular for revealing interfacial features and catalytic mechanisms in electrocatalysis. Nevertheless, the resulting spectra are highly sensitive to factors such as X‐ray radiation, reaction environment, and acquisition procedures, all of which may potentially introduce artifacts that are often overlooked, leading to misinterpretations of electrocatalytic behaviors. In this perspective, several emerging hard X‐ray spectroscopies used in electrocatalysis research are reviewed, highlighting their electronic transition processes, detection modes, and functional complementarity. Significantly, based on a case study of operando X‐ray absorption spectroscopy at various beamlines, potential artifacts generated by X‐ray irradiation are systematically investigated through photon‐flux density‐, dose‐, and time‐dependent studies of typical copper electrocatalysts. Accordingly, a practical protocol for conducting reliable X‐ray spectroscopic measurements in operando electrocatalytic studies to minimize potential artifacts that can affect the resulting X‐ray spectra, thereby ensuring accurate interpretation and a deeper understanding of interfacial interactions and electrocatalytic mechanisms, is established.
- 24 March 2025
- Published by Wiley in Advanced Materials
- Vol. 37 (18) , e2418797
Resolving Dynamic Behavior of Electrocatalysts via Advances of Operando X‐Ray Absorption Spectroscopies: Potential Artifacts and Practical Guidelines
Although numerous techniques are developed to enable real‐time understanding of dynamic interactions at the solid–liquid interface during electrochemical reactions, further progress in the development of these methods over the last several decades has faced challenges. With the rapid development of high‐brilliance synchrotron sources, operando X‐ray spectroscopies have become increasingly popular for revealing interfacial features and catalytic mechanisms in electrocatalysis. Nevertheless, the resulting spectra are highly sensitive to factors such as X‐ray radiation, reaction environment, and acquisition procedures, all of which may potentially introduce artifacts that are often overlooked, leading to misinterpretations of electrocatalytic behaviors. In this perspective, several emerging hard X‐ray spectroscopies used in electrocatalysis research are reviewed, highlighting their electronic transition processes, detection modes, and functional complementarity. Significantly, based on a case study of operando X‐ray absorption spectroscopy at various beamlines, potential artifacts generated by X‐ray irradiation are systematically investigated through photon‐flux density‐, dose‐, and time‐dependent studies of typical copper electrocatalysts. Accordingly, a practical protocol for conducting reliable X‐ray spectroscopic measurements in operando electrocatalytic studies to minimize potential artifacts that can affect the resulting X‐ray spectra, thereby ensuring accurate interpretation and a deeper understanding of interfacial interactions and electrocatalytic mechanisms, is established.
- Open Access
- 7 March 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Dynamic boron-doping switched chitin-based single-atom Pt catalyst for chemo-selective hydrogenation
Biomass valorization is a way to promote the ‘waste-to-wealth’ concept, which is a pre-requisite condition for a future sustainable lifestyle. The direct utilization of natural polymer for value-added materials should be prioritized. With this object, we demonstrate a facile and economical method to prepare chitin-derived supramolecular nanowires-stabilized single-atom sites Pt catalysts (SS-Pt-CSNs). A comprehensive characterization shows the structure of single-atom Pt coordinated with the organic supramolecular (ligand-type) entity, which is both flexible (like in homogenous catalyst) and robust (like in heterogenous catalyst). Such hybrid characteristics of these SS-Pt-CSNs materials exhibit excellent catalytic performance for chemo-selective hydrogenation of various unsaturated bonds with a selectivity of more than 90:1 and a high turnover number (TON) of 121,350. Mechanistic studies demonstrate that both empty coordination sites of Pt and dynamic B-doping are the key factors for exceptional efficiency and high selectivity.
- 7 March 2025
- Published by Springer Nature in Nature Communications
- Vol. 16 (1) , 1-9
Open AccessDynamic boron-doping switched chitin-based single-atom Pt catalyst for chemo-selective hydrogenation
Biomass valorization is a way to promote the ‘waste-to-wealth’ concept, which is a pre-requisite condition for a future sustainable lifestyle. The direct utilization of natural polymer for value-added materials should be prioritized. With this object, we demonstrate a facile and economical method to prepare chitin-derived supramolecular nanowires-stabilized single-atom sites Pt catalysts (SS-Pt-CSNs). A comprehensive characterization shows the structure of single-atom Pt coordinated with the organic supramolecular (ligand-type) entity, which is both flexible (like in homogenous catalyst) and robust (like in heterogenous catalyst). Such hybrid characteristics of these SS-Pt-CSNs materials exhibit excellent catalytic performance for chemo-selective hydrogenation of various unsaturated bonds with a selectivity of more than 90:1 and a high turnover number (TON) of 121,350. Mechanistic studies demonstrate that both empty coordination sites of Pt and dynamic B-doping are the key factors for exceptional efficiency and high selectivity.