Christian Schuss
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christian Schuss has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
- Tapio Fabritius
University of Oulu
7 shared publications - Timo Rahkonen
University of Oulu
4 shared publications Atte Koskela
2 shared publications- Bernd Eichberger
Institute of Electronic Sensor Systems, Graz University of Technology, 8010 Graz, Austria
2 shared publications Anuradha Athukorala
University of Oulu
1 shared publicationKari Remes
1 shared publication
Latest Publications
- Open Access
- 17 June 2026
- Published by Springer Nature
- p. 557-572
Real-Time Thermal Monitoring and Respiratory Analytics on Edge AI for Remote Healthcare
Contactless respiratory monitoring is increasingly relevant for remote healthcare, infection-control workflows, and continuous assessment in non-clinical environments. Thermal imaging provides an unobtrusive modality for respiratory sensing, yet most existing systems rely on high-frame-rate or radiometric cameras that limit scalability. This work presents a real-time, edge-deployable thermal monitoring system that performs respiratory-rate estimation, temperature extraction, and multi-person tracking using a low-cost FLIR C5 camera despite its low temporal resolution. The pipeline integrates YOLO-based person detection, persistent ID tracking, and a robust temperature-scale extraction method using OCR with temporal smoothing and outlier rejection. Respiratory signals are derived from nostril-level thermal fluctuations using motion-gated sampling, adaptive resampling, FIR band-pass filtering, and Welch spectral analysis, with a spectral-coherence check to suppress unstable estimates. The full system runs on an NVIDIA Jetson Orin NX with real-time visualisation and per-person logging. Preliminary results show that reliable respiratory-rate estimation is achievable under low-frame-rate constraints, demonstrating the feasibility of low-cost thermal sensors for scalable, privacy-preserving remote health monitoring.
- 17 June 2026
- Published by Springer Nature
- p. 557-572
Open AccessReal-Time Thermal Monitoring and Respiratory Analytics on Edge AI for Remote Healthcare
Contactless respiratory monitoring is increasingly relevant for remote healthcare, infection-control workflows, and continuous assessment in non-clinical environments. Thermal imaging provides an unobtrusive modality for respiratory sensing, yet most existing systems rely on high-frame-rate or radiometric cameras that limit scalability. This work presents a real-time, edge-deployable thermal monitoring system that performs respiratory-rate estimation, temperature extraction, and multi-person tracking using a low-cost FLIR C5 camera despite its low temporal resolution. The pipeline integrates YOLO-based person detection, persistent ID tracking, and a robust temperature-scale extraction method using OCR with temporal smoothing and outlier rejection. Respiratory signals are derived from nostril-level thermal fluctuations using motion-gated sampling, adaptive resampling, FIR band-pass filtering, and Welch spectral analysis, with a spectral-coherence check to suppress unstable estimates. The full system runs on an NVIDIA Jetson Orin NX with real-time visualisation and per-person logging. Preliminary results show that reliable respiratory-rate estimation is achievable under low-frame-rate constraints, demonstrating the feasibility of low-cost thermal sensors for scalable, privacy-preserving remote health monitoring.
- Open Access
- 16 June 2026
- Published by Springer Nature
- p. 446-461
Exploring Digital Health Concepts Through Hands-On Education in Biomedical Engineering
This paper presents insights and experiences from Wireless Measurements Project (course code 521168S), a course delivered at the University of Oulu, Finland. As a compulsory element of the newly established master’s programme in Biomedical Engineering within the Faculty of Information Technology and Electrical Engineering (ITEE), the course introduces students to practical wireless measurement techniques through a hands-on, project-based methodology. At the beginning of the course, students receive an Internet of Medical Things (IoMT) starter kit comprising an ESP8266 microcontroller, an analog heart-rate sensor, and basic electronic components. Using this kit as a foundation, they design and implement their own IoMT prototypes, addressing themes such as physiological monitoring, wireless data transmission, embedded signal processing, and cloud-based health applications. In this paper, we describe the pedagogical design of the course, present representative student projects, and examine the challenges and opportunities of integrating wireless biomedical measurements into engineering education.
- 16 June 2026
- Published by Springer Nature
- p. 446-461
Open AccessExploring Digital Health Concepts Through Hands-On Education in Biomedical Engineering
This paper presents insights and experiences from Wireless Measurements Project (course code 521168S), a course delivered at the University of Oulu, Finland. As a compulsory element of the newly established master’s programme in Biomedical Engineering within the Faculty of Information Technology and Electrical Engineering (ITEE), the course introduces students to practical wireless measurement techniques through a hands-on, project-based methodology. At the beginning of the course, students receive an Internet of Medical Things (IoMT) starter kit comprising an ESP8266 microcontroller, an analog heart-rate sensor, and basic electronic components. Using this kit as a foundation, they design and implement their own IoMT prototypes, addressing themes such as physiological monitoring, wireless data transmission, embedded signal processing, and cloud-based health applications. In this paper, we describe the pedagogical design of the course, present representative student projects, and examine the challenges and opportunities of integrating wireless biomedical measurements into engineering education.
- Open Access
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Pervasive Computing
- p. 1-12
Human–AI Collaboration for Reliable Signal Analysis in Mission-Critical Systems
- 1 January 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Pervasive Computing
- p. 1-12
Open AccessHuman–AI Collaboration for Reliable Signal Analysis in Mission-Critical Systems
- Open Access
- 25 January 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 1232
Impact of Environmental Conditions on the Degree of Efficiency and Operating Range of PV-Powered Electric Vehicles
This paper investigates the impact of environmental conditions on the possible output power of photovoltaic (PV) installations on top of hybrid electric vehicles (HEVs) and battery-powered electric vehicles (BEVs). First, we discuss the characteristics and behavior of PV cells in order to provide an understanding of the energy source that we aim to integrate into vehicles. Second, we elaborate on how PV cells and panels can be simulated to estimate the potential extension of the electrical driving range (ERE) of BEVs and HEVs. In particular, we concentrate on the impact of the vehicle’s curved roof surface on the possible output of the PV installation. In this research, we present considerations for vehicles in both parking and driving conditions. More precisely, we demonstrate how the frequently changing environmental conditions that occur while driving represent significant challenges to the control of the operating voltage of PV cells. As the area for deploying PV cells on top of an electric vehicle is limited, attention needs to be paid to how to optimize and maximize the degree of efficiency of PV-powered electric vehicles.
- 25 January 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (3) , 1232
Open AccessImpact of Environmental Conditions on the Degree of Efficiency and Operating Range of PV-Powered Electric Vehicles
This paper investigates the impact of environmental conditions on the possible output power of photovoltaic (PV) installations on top of hybrid electric vehicles (HEVs) and battery-powered electric vehicles (BEVs). First, we discuss the characteristics and behavior of PV cells in order to provide an understanding of the energy source that we aim to integrate into vehicles. Second, we elaborate on how PV cells and panels can be simulated to estimate the potential extension of the electrical driving range (ERE) of BEVs and HEVs. In particular, we concentrate on the impact of the vehicle’s curved roof surface on the possible output of the PV installation. In this research, we present considerations for vehicles in both parking and driving conditions. More precisely, we demonstrate how the frequently changing environmental conditions that occur while driving represent significant challenges to the control of the operating voltage of PV cells. As the area for deploying PV cells on top of an electric vehicle is limited, attention needs to be paid to how to optimize and maximize the degree of efficiency of PV-powered electric vehicles.
- Open Access
- 17 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Classroom Quality: On the Amount of Ambient Light in Today's Classroom - A Field Study
In this paper, we investigate the given ambient lighting conditions in today's schools. On the example of Oulu University Teacher Training School, the classroom quality in terms of the available amount of ambient lighting is analysed. In particular, attention is paid to the available illuminance of the pupils' desks. Commonly, light is produced artificially by light sources installed on the classroom's ceiling and obtained from the outside through windows. However, due to the use of digital blackboards, window blinds are often closed and lights are often switched off, thereby, reducing the available light in the classroom significantly. Furthermore, our results reveal that each pupil's desk receives a different light intensity. It is worth noting that low levels of ambient lighting can result into a degradation of learning performances and, therefore, requiring pupils more time solve different types of activities assigned by the teacher.
- 17 May 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-6
Open AccessClassroom Quality: On the Amount of Ambient Light in Today's Classroom - A Field Study
In this paper, we investigate the given ambient lighting conditions in today's schools. On the example of Oulu University Teacher Training School, the classroom quality in terms of the available amount of ambient lighting is analysed. In particular, attention is paid to the available illuminance of the pupils' desks. Commonly, light is produced artificially by light sources installed on the classroom's ceiling and obtained from the outside through windows. However, due to the use of digital blackboards, window blinds are often closed and lights are often switched off, thereby, reducing the available light in the classroom significantly. Furthermore, our results reveal that each pupil's desk receives a different light intensity. It is worth noting that low levels of ambient lighting can result into a degradation of learning performances and, therefore, requiring pupils more time solve different types of activities assigned by the teacher.
- 30 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 69 (5) , 2449-2458
Impacts on the Output Power of Photovoltaics on Top of Electric and Hybrid Electric Vehicles
This paper investigates the potential output power of a photovoltaic (PV) installation on top of battery-powered electric vehicles (BEVs) and hybrid electric vehicles (HEVs). Firstly, we discuss the available area on the roof of BEVs and HEVs for deploying PV cells. Secondly, we verify the impact of the vehicles curved roof surface on the available output power of photovoltaics. More precisely, we present a method of calculating the effective area of PV cells, useful for PV simulation models and calculating the available output power of PV cells with different longitudinal angles. We verify our method within experiments and present the results of them, showing that the model predicts the output power of PV cells with an accuracy better than 2.5%. Furthermore, we discuss the impact of the curved surface and ambient conditions on possible interconnections of PV cells. Here, we present considerations for both, stationary and moving conditions, to highlight the difficulties for interconnecting PV cells to form PV panels. From our experimental results, for frequent changes in the available solar radiation level, we can see a difference in terms of output power larger than 75% between series and parallel interconnections of PV cells.
- 30 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 69 (5) , 2449-2458
Impacts on the Output Power of Photovoltaics on Top of Electric and Hybrid Electric Vehicles
This paper investigates the potential output power of a photovoltaic (PV) installation on top of battery-powered electric vehicles (BEVs) and hybrid electric vehicles (HEVs). Firstly, we discuss the available area on the roof of BEVs and HEVs for deploying PV cells. Secondly, we verify the impact of the vehicles curved roof surface on the available output power of photovoltaics. More precisely, we present a method of calculating the effective area of PV cells, useful for PV simulation models and calculating the available output power of PV cells with different longitudinal angles. We verify our method within experiments and present the results of them, showing that the model predicts the output power of PV cells with an accuracy better than 2.5%. Furthermore, we discuss the impact of the curved surface and ambient conditions on possible interconnections of PV cells. Here, we present considerations for both, stationary and moving conditions, to highlight the difficulties for interconnecting PV cells to form PV panels. From our experimental results, for frequent changes in the available solar radiation level, we can see a difference in terms of output power larger than 75% between series and parallel interconnections of PV cells.
- Open Access
- 18 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 68 (5) , 1485-1493
Moving Photovoltaic Installations: Impacts of the Sampling Rate on Maximum Power Point Tracking Algorithms
This paper investigates the impact of the solar radiation level on the available output power of moving photovoltaic (PV) installations with the help of PV simulation models and real-world environmental data. For moving PV installations, for example, on top of hybrid electric vehicles and battery-powered electric vehicles, the sampling rate was 6000 samples per second. We analyze the changes in the amount of solar radiation that can influence on the control of the operating voltage of PVs within maximum power point tracking (MPPT) algorithms. We present recommendations for the sampling rate of environmental data, which is used for PV simulation models. Furthermore, we discuss the update frequency of vital parameters of different MPPT techniques for controlling moving PV installations. Here, we concentrate on the degree of efficiency of the perturb and observe algorithm. In addition, we show how the sampling rate of environmental data influences the test criteria for MPPT algorithms.
- 18 March 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Instrumentation and Measurement
- Vol. 68 (5) , 1485-1493
Open AccessMoving Photovoltaic Installations: Impacts of the Sampling Rate on Maximum Power Point Tracking Algorithms
This paper investigates the impact of the solar radiation level on the available output power of moving photovoltaic (PV) installations with the help of PV simulation models and real-world environmental data. For moving PV installations, for example, on top of hybrid electric vehicles and battery-powered electric vehicles, the sampling rate was 6000 samples per second. We analyze the changes in the amount of solar radiation that can influence on the control of the operating voltage of PVs within maximum power point tracking (MPPT) algorithms. We present recommendations for the sampling rate of environmental data, which is used for PV simulation models. Furthermore, we discuss the update frequency of vital parameters of different MPPT techniques for controlling moving PV installations. Here, we concentrate on the degree of efficiency of the perturb and observe algorithm. In addition, we show how the sampling rate of environmental data influences the test criteria for MPPT algorithms.
- 10 May 2016
- Published by Springer Nature
- p. 143-151
Tools for Aiding the Design of Photovoltaic Systems
- 10 May 2016
- Published by Springer Nature
- p. 143-151
Tools for Aiding the Design of Photovoltaic Systems
- 1 November 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 6696 (23057254) , 132-139
Solar energy harvesting strategies for portable devices such as mobile phones
In this paper we present strategies to harvest solar energy for mobile phones. Thereby, we discuss system structures, in which mobile phones act as either active or passive devices depending on an available communication between smartphones and their solar chargers. Both design approaches have their advantages and disadvantages, which we will elaborate in more detail in our analysis. At the moment, conventional solar chargers do not meet user expectations and need substantial improvements. We aim to establish design guidelines to make solar chargers competitive with normal chargers, which are plugged into electric sockets. As a result, we achieve appropriate recharging times for smartphones on the one hand and satisfy user requirements on the other hand.
- 1 November 2013
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 6696 (23057254) , 132-139
Solar energy harvesting strategies for portable devices such as mobile phones
In this paper we present strategies to harvest solar energy for mobile phones. Thereby, we discuss system structures, in which mobile phones act as either active or passive devices depending on an available communication between smartphones and their solar chargers. Both design approaches have their advantages and disadvantages, which we will elaborate in more detail in our analysis. At the moment, conventional solar chargers do not meet user expectations and need substantial improvements. We aim to establish design guidelines to make solar chargers competitive with normal chargers, which are plugged into electric sockets. As a result, we achieve appropriate recharging times for smartphones on the one hand and satisfy user requirements on the other hand.