Lev Maksimov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Lev Maksimov has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
Andrey Voronov
3 shared publications- Elena Vialkova
Department of Engineering Systems and Sanitation, Industrial University of Tyumen, Volodarskogo Str., 38, 625000 Tyumen, Russia
2 shared publications - Marina Aleksandrovna Zemlyanova
Federal Scientific Center for Medical and Preventive Health Risk Management Technologies
2 shared publications Svetlana Maksimova
Department of Engineering Systems and Structures Industrial University of Tyumen Tyumen region Russia
2 shared publications- Svetlana Maksimova
Industrial University of Tyumen
2 shared publications V A Ogay
Industrial University of Tyumen, Tyumen, Russia
2 shared publications
Latest Publications
- Open Access
- 31 December 2024
- Published by Seventh Sense Research Group Journals in International Journal of Civil Engineering
- Vol. 11 (12) , 1-11
Sustainable Ground Water Treatment Plants Sludge Recycling System Development via SWOT
The results of studies of iron-containing sludge (hereinafter referred to as ICS) from wash waters of groundwater iron removal stations prove the perspectives of its application in a wide range of industries. The shortcomings of existing systems for recycling ICS and prospects for their modernization considering current global trends and the regulatory framework of the Russian Federation have been identified. The system for recycling ICS into final marketable products is proposed using the example of consumables for nondestructive testing. In the proposed system of recycling ICS, functional subjects are identified as responsible for various stages of the transformation of secondary resources into secondary raw materials and/or final products. The section of the system that has the least level of theoretical and practical elaboration was identified and accepted as an object for SWOT analysis. At least 5 key factors were identified for each element of the SWOT analysis, and a SWOT analysis matrix was created containing 15 proposed implementation measures to intensify ICS's introduction into economic circulation. Gaps in knowledge and regulatory framework in the field of application of “secondary resources” were identified. Research priorities and future challenges are discussed to support developing and applying effective management methods for iron-containing sludge from iron removal stations using multi-pronged strategies. The prospects of the influence of weaknesses and threats leveling have been predicted, as well as the influence of strengths and opportunities increasing for widespread implementation of recycling practices in water utility acceleration.
- 31 December 2024
- Published by Seventh Sense Research Group Journals in International Journal of Civil Engineering
- Vol. 11 (12) , 1-11
Open AccessSustainable Ground Water Treatment Plants Sludge Recycling System Development via SWOT
The results of studies of iron-containing sludge (hereinafter referred to as ICS) from wash waters of groundwater iron removal stations prove the perspectives of its application in a wide range of industries. The shortcomings of existing systems for recycling ICS and prospects for their modernization considering current global trends and the regulatory framework of the Russian Federation have been identified. The system for recycling ICS into final marketable products is proposed using the example of consumables for nondestructive testing. In the proposed system of recycling ICS, functional subjects are identified as responsible for various stages of the transformation of secondary resources into secondary raw materials and/or final products. The section of the system that has the least level of theoretical and practical elaboration was identified and accepted as an object for SWOT analysis. At least 5 key factors were identified for each element of the SWOT analysis, and a SWOT analysis matrix was created containing 15 proposed implementation measures to intensify ICS's introduction into economic circulation. Gaps in knowledge and regulatory framework in the field of application of “secondary resources” were identified. Research priorities and future challenges are discussed to support developing and applying effective management methods for iron-containing sludge from iron removal stations using multi-pronged strategies. The prospects of the influence of weaknesses and threats leveling have been predicted, as well as the influence of strengths and opportunities increasing for widespread implementation of recycling practices in water utility acceleration.
- Open Access
- 29 April 2024
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 19 (4) , 618-630
Life support technology of beach glamping using renewable energy of sea waves
Технология жизнеобеспечения пляжных глэмпингов с использованием возобновляемой энергии морских волн
- 29 April 2024
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 19 (4) , 618-630
Open AccessLife support technology of beach glamping using renewable energy of sea waves
Технология жизнеобеспечения пляжных глэмпингов с использованием возобновляемой энергии морских волн
- Open Access
- 1 April 2021
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 16 (4) , 493-505
Iron removal stations’ sludges postprocessing for its resource potential identification
Introduction. The sludge of the washing waters of the underground water iron removal station is a large-tonnage technogenic waste that is dangerous for the environment. The homogeneous chemical composition and finely dispersed structure of the sludge make it possible to consider it as a valuable raw material for the production of various products in the conditions of a forward movement towards a circular economy. Obtaining nanosized metal powders from the sludge of iron removal stations has a number of advantages over traditional physical, chemical and mechanical methods. To optimize the process of obtaining highly dispersed metal powders from the sludge of iron removal stations, it is necessary to study the influence of the main technological parameters on the size, shape and chemical composition of the final material. Materials and methods. Thermal treatment of the sludge of the iron removal station in the carbon monoxide medium was carried out in the temperature range of 400–600 °C. Ultrasonic dispersion was used to get an idea of the true particle size. The granulometric composition of the sludge was studied by electron microscopy and laser beam scattering. Results. The results of experimental studies of the granulometric composition of the treated sludge of iron removal stations are presented. The particles obtained at a temperature of 450 °C had the most pronounced spherical shape, low open porosity, and a low degree of adhesion to neighboring particles. These properties are key for micro- and nanopowder-based products. An increase in the temperature of sludge processing led to the adhesion of particles and their fusion into large aggregates with a brittle structure as a result of the development of crystallization processes. Conclusions. The proposed methods of physicochemical treatment in an environment of carbon monoxide and ultrasonic action of the sludge of an iron removal station, which is currently a technogenic waste, makes it possible to obtain a highly dispersed metal powder. This material has the necessary properties for use in modern high-tech industries.
- 1 April 2021
- Published by Moscow State University of Civil Engineering in Vestnik MGSU
- Vol. 16 (4) , 493-505
Open AccessIron removal stations’ sludges postprocessing for its resource potential identification
Introduction. The sludge of the washing waters of the underground water iron removal station is a large-tonnage technogenic waste that is dangerous for the environment. The homogeneous chemical composition and finely dispersed structure of the sludge make it possible to consider it as a valuable raw material for the production of various products in the conditions of a forward movement towards a circular economy. Obtaining nanosized metal powders from the sludge of iron removal stations has a number of advantages over traditional physical, chemical and mechanical methods. To optimize the process of obtaining highly dispersed metal powders from the sludge of iron removal stations, it is necessary to study the influence of the main technological parameters on the size, shape and chemical composition of the final material. Materials and methods. Thermal treatment of the sludge of the iron removal station in the carbon monoxide medium was carried out in the temperature range of 400–600 °C. Ultrasonic dispersion was used to get an idea of the true particle size. The granulometric composition of the sludge was studied by electron microscopy and laser beam scattering. Results. The results of experimental studies of the granulometric composition of the treated sludge of iron removal stations are presented. The particles obtained at a temperature of 450 °C had the most pronounced spherical shape, low open porosity, and a low degree of adhesion to neighboring particles. These properties are key for micro- and nanopowder-based products. An increase in the temperature of sludge processing led to the adhesion of particles and their fusion into large aggregates with a brittle structure as a result of the development of crystallization processes. Conclusions. The proposed methods of physicochemical treatment in an environment of carbon monoxide and ultrasonic action of the sludge of an iron removal station, which is currently a technogenic waste, makes it possible to obtain a highly dispersed metal powder. This material has the necessary properties for use in modern high-tech industries.
- 17 March 2020
- Published by Springer Nature in Environmental Processes
- Vol. 7 (2) , 673-690
Integrated Design Approach to Small Sewage Systems in the Arctic Climate
- 17 March 2020
- Published by Springer Nature in Environmental Processes
- Vol. 7 (2) , 673-690
Integrated Design Approach to Small Sewage Systems in the Arctic Climate
- Open Access
- 16 August 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 181 (1) , 012007
Development of installation for the preparation of biosorbents from waste petrochemical industry
The article considers the problem of environmental pollution by oil spills. A solution is proposed in the form of a developed device and a method for its implementation. Its technical characteristics for the preparation of biosorbents from wastes from the petrochemical industry, in particular surplus activated sludge after heat treatment, are presented. The parameters that are necessary for the effective preparation of the biosorbent are given. Parameters are obtained by experiment.
- 16 August 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 181 (1) , 012007
Open AccessDevelopment of installation for the preparation of biosorbents from waste petrochemical industry
The article considers the problem of environmental pollution by oil spills. A solution is proposed in the form of a developed device and a method for its implementation. Its technical characteristics for the preparation of biosorbents from wastes from the petrochemical industry, in particular surplus activated sludge after heat treatment, are presented. The parameters that are necessary for the effective preparation of the biosorbent are given. Parameters are obtained by experiment.
- Open Access
- 16 August 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 181 (1) , 012006
Processing of high-viscosity oils by complex electromagnetic treatment
At present, a promising method for improving the rheological properties of high-viscosity oils is their electromagnetic treatment. This is confirmed by a number of scientific and theoretical works of modern researchers. The positive effect of the impact is due to the presence of dispersion areas in the electromagnetic fields of certain frequencies. In order to improve the energy efficiency of the preparation of high-viscosity oils and develop an innovative installation, studies were carried out. A complex treatment process was used: a high-frequency electromagnetic field; microwave electromagnetic field; a static magnetic field, and then the change in the rheological characteristics of the oil was recorded.
- 16 August 2018
- Published by IOP Publishing in IOP Conference Series: Earth and Environmental Science
- Vol. 181 (1) , 012006
Open AccessProcessing of high-viscosity oils by complex electromagnetic treatment
At present, a promising method for improving the rheological properties of high-viscosity oils is their electromagnetic treatment. This is confirmed by a number of scientific and theoretical works of modern researchers. The positive effect of the impact is due to the presence of dispersion areas in the electromagnetic fields of certain frequencies. In order to improve the energy efficiency of the preparation of high-viscosity oils and develop an innovative installation, studies were carried out. A complex treatment process was used: a high-frequency electromagnetic field; microwave electromagnetic field; a static magnetic field, and then the change in the rheological characteristics of the oil was recorded.
- Open Access
- 11 June 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 365
Conceptual approach to the creation of “smart” sewerage system for city surface runoff
- 11 June 2018
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 365
Open AccessConceptual approach to the creation of “smart” sewerage system for city surface runoff
- Open Access
- 23 May 2017
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 106, 09020
Experience in the use of modern educational technologies in teaching professional disciplines of training direction “Civil Engineering”
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
- 23 May 2017
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 106, 09020
Open AccessExperience in the use of modern educational technologies in teaching professional disciplines of training direction “Civil Engineering”
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
- Open Access
- 23 May 2017
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 106, 07008
The protection of urban areas from surface wastewater pollutions
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
- 23 May 2017
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 106, 07008
Open AccessThe protection of urban areas from surface wastewater pollutions
MATEC Web of Conferences, open access proceedings in Materials science, Engineering and Chemistry
- Open Access
- 11 August 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 73, 05005
Effect of Enclosed Space Configuration and Freezing Medium Volume on Refreezing Pressure
- 11 August 2016
- Published by EDP Sciences in MATEC Web of Conferences
- Vol. 73, 05005
Open AccessEffect of Enclosed Space Configuration and Freezing Medium Volume on Refreezing Pressure