PÖPär‐Olov Östman

Pär‐Olov Östman

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Pär‐Olov Östman has a total of 37 co-authors. Here are the top co-authors by number of shared publications:

  • Mats Hellman

    7 shared publications
  • Lars Sennerby

    Department of Biomaterials, Institute of Clinical Sciences, The Sahlgrenska Academy, University of Gothenburg, Gothenburg, Sweden

    6 shared publications
  • Annika Skoglund

    4 shared publications
  • Göran Anneroth

    4 shared publications
  • Ann Wennerberg

    Professor, Department of Biomaterials, Institute for Clinical Sciences, Sahlgrenska Academy, Gothenburg University, Gothenburg and Department of Dental Materials, Malmö University, Malmö, Sweden, and Department of Prosthodontics, Malmö University Faculty of Odontology, Malmö, Sweden

    3 shared publications
  • Tomas Albrektsson

    Professor, Department of Biomaterials, Institute for Clinical Sciences, Sahlgrenska Academy, Gothenburg University, Gothenburg and Department of Dental Materials, Malmö University, Malmö, Sweden, and Department of Prosthodontics, Malmö University Faculty of Odontology, Malmö, Sweden

    3 shared publications

Latest Publications

  • Ten Years Later. Results from a Prospective Single‐Centre Clinical Study on 121 Oxidized (TiUnite™) Brånemark Implants in 46 Patients

    by Pär‐Olov Östman, Mats Hellman, Lars Sennerby

    Background: Concerns have been raised that use of surface‐modified implants may result in peri‐implant infection and marked marginal bone loss over time.Purpose: The aim of this prospective study was to evaluate the survival rate, marginal bone, and soft tissue conditions at surface‐modified titanium dental implants after 10 years of function.Material and Methods: Forty‐six totally and partially edentulous patients were provided with 121 Brånemark oxidized implants (TiUnite™, Nobel Biocare AB, Gothenburg, Sweden). Twenty‐four (20%) implants were immediate loaded and 97 (80%) were placed using a two‐stage procedure. A total of 22 single, 23 partial, and 7 total restorations were delivered. Clinical and radiographic checkups were carried out after 3, 6, 12 months, and thereafter annually up to 10 years. At these occasions, oral hygiene was evaluated and peri‐implant mucosa examined by probing. If needed, patients were enrolled in an individual program for hygiene controls and professional cleaning. Marginal bone loss was evaluated in intraoral radiographs taken at baseline and after 1, 5, and 10 years of function.Results: One (0.8%) implant failed after 8 years giving a Survival Rate (SR) of 99.2% after 10 years. A total of 11 sites (9.2%) showed bleeding on probing (BP) at the 10th annual checkup. The mean marginal bone loss was 0.7 ± 1.35 mm based on 106 readable pairs of radiographs from baseline and from the 10th annual examination. Twelve (11.3%) implants showed more than 2 mm bone loss, and five (4.7%) showed more than 3 mm of bone loss after 10 years. For the latter, all patients were smokers and had poor or acceptable oral hygiene. All five implants with >3 mm bone loss showed BP and two (1.9%) showed suppuration from the pocket. For the remaining seven implants with more than 2 mm bone loss, no correlation to smoking, oral hygiene, bleeding, or pus could be seen. Time/marginal bone level plots of the 12 implants with more than 2 mm bone loss after 10 years, showed minor changes from the first annual checkup except for the two infected implants.Conclusions: It is concluded that good long‐term clinical outcomes can be obtained with oxidized titanium dental implants. Only 1.9% of examined implants showed significant marginal bone loss together with bleeding and suppuration after 10 years of function.


  • Immediate Occlusal Loading of NanoTite™ Tapered Implants: A Prospective 1‐Year Clinical and Radiographic Study

    by Pär‐Olov Östman, Ann Wennerberg, Annika Ekestubbe, Tomas Albrektsson

    Background: During the last decade, high success rates have been reported for implants placed with immediate loading procedures, especially when bone quality and quantity provide good implant stability. In many of these studies, straight‐walled implants with moderately rough surfaces were employed. Tapered implants are becoming increasingly more popular due to standardized drilling protocols and reports of high initial primary stability.Purpose: The aim of the present prospective, single center clinical study was to evaluate surface topographical analysis and the clinical and radiographic outcomes of the NanoTite™ (BIOMET 3i, Palm Beach Gardens, FL, USA) Tapered Implant when used for immediate loading of fixed prostheses and single‐tooth restorations.Materials and Methods: Forty‐two patients who needed implant treatment and met admission criteria agreed to participate in the study and were consecutively enrolled. Surgical implant placement requirements consisted of a final torque of a least 30 Ncm prior to final seating and an implant stability quotient above 55. A total of 139 NanoTite Tapered implants (112 maxillary and 27 mandibular) were placed by one investigator, and the majority of these implants (n = 77/55%) were placed in posterior regions, and in soft bone (n = 90/65%). A total of 57 prosthetic constructions were evaluated consisting of 20 single‐tooth restorations, 30 fixed partial dentures, and 7 complete, fixed maxillary restorations. Radiographs were taken at baseline and at 12 months of follow‐up.Results: Of the 139 study implants, one implant failure was declared. The overall cumulative survival rate at 1 year is 99.4%. Mean marginal bone resorption is 1.01 mm (SD 0.85) during the first year of function.Conclusion: Although limited to the short follow‐up, immediate loading of NanoTite Tapered implants seems to be a viable option in implant rehabilitation, when insertion torque of at least 30 Ncm is achieved. Further studies are needed to authenticate the finding of this study.


  • Immediate Occlusal Loading of NanoTite™ PREVAIL® Implants: A Prospective 1‐Year Clinical and Radiographic Study

    by Pär‐Olov Östman, Ann Wennerberg, Tomas Albrektsson

    Background: Recently, a new implant surface texture, featuring application of nanometer‐scale calcium phosphate has been shown to enhance early bone fixation and formation in preclinical studies and in human histomorphometric studies, which may be beneficial in immediate loading situations.Aim: The purpose of the present prospective clinical study was to, during 1 year, clinically and radiographically evaluate a nanometer scale surface modified implant placed for immediate loading of fixed prostheses in both maxillary and mandibular regions.Materials and Methods: Thirty‐five out of 38 patients who needed implant treatment and met inclusion criteria agreed to participate in the study and were consecutively enrolled. Surgical implant placement requirements consisted of a final torque of a least 25 Ncm prior to final seating and an implant stability quotient above 55. A total of 102 NanoTite™ PREVAIL® (NTP) implants (BIOMET 3i, Palm Beach Gardens, FL, USA) (66 maxillary and 36 mandibular) were placed by one investigator, and the majority of these were placed in posterior regions (65%) and in soft bone (69%). A total of 44 prosthetic constructions were evaluated consisting of 14 single‐tooth restorations, 26 fixed partial dentures, and four complete fixed restorations. All provisional constructions were delivered within 1 hour, and the final constructions placed after 4 months. Implants were monitored for clinical and radiographic outcomes at follow‐up examinations scheduled for 3, 6, and 12 months.Results: Of the 102 study implants, one implant failed. The simple cumulative survival rate value at 1 year was 99.2%. The average marginal bone resorption was 0.37 mm (SD 0.39) during the first year in function. According to the success criteria of Albrektsson and Zarb, success grade 1 was found with 93% of the implants.Conclusion: Although limited to the short follow‐up, immediate loading of NanoTite Prevail implants seems to be a viable option in implant rehabilitation, at least when a good initial fixation is achieved.


  • Immediate Provisionalization of NanoTite Implants in Support of Single-Tooth and Unilateral Restorations: One-Year Interim Report of a Prospective, Multicenter Study

    by Pär-Olov Östman, Markijan Hupalo, Robert Del Castillo, Robert W. Emery, Roberto Cocchetto, Giampaolo Vincenzi, Barry Wagenberg, Bruno Vanassche, Andreas Valentin, Gerard Clausen, et al.


    • 14 June 2008
      • Vol. 23  (2) , 315-22

    Immediate occlusal loading of implants in the partially edentate mandible: a prospective 1-year radiographic and 4-year clinical study.

    by Pär-Olov Ostman, Mats Hellman, Lars Sennerby

    The purpose of the present prospective clinical study was to evaluate the radiographic and clinical outcome of immediately loaded implants in the partial edentulous mandible over a 4-year follow-up period using a modified surgical protocol, primary implant stability criteria, and splinting for inclusion. Patients in need of implant treatment in the partial edentate mandible were consecutively included in the study. The implant sites were underprepared to obtain maximal stability. Inclusion criteria for the study were torque of a least 30 Ncm before final seating of the implant and an ISQ greater than 60. A provisional fixed partial denture was delivered within 24 hours and a definitive fixed partial denture within 3 months. The patients were monitored with clinical and radiographic follow-up examinations for up to 4 years. Stability of the implants was measured with resonance frequency analysis at placement and after 6 months. Ninety-six patients were evaluated, and 77 patients who met the inclusion criteria were included. A total of 111 fixed partial dentures supported by 257 Brånemark System implants (77 turned and 180 TiUnite implants) were delivered. Four (1.6%) of the 257 implants did not osseointegrate, giving an overall survival rate of 98.4% after 4 years. Three turned (3.9%) implants and 1 oxidized implant (0.6%) failed after 4 to 13 months. The average marginal bone resorption was 0.7 mm (SD 0.78) during the first year in function. Turned implants showed an average bone loss of 0.5 mm (SD 0.8) and oxidized implants an average of 0.7 mm (SD 0.8). Resonance frequency analysis showed a mean implant stability quotient of 72.2 (SD 7.5) at placement and 72.5 (SD 5.7) after 6 months of loading. It is concluded that immediate loading of implants with firm primary stability in partially edentulous areas of the mandible appears to be a viable procedure with predictable outcome.


  • Temporary Implant‐Supported Prosthesis for Immediate Loading According to a Chair‐Side Concept: Technical Note and Results from 37 Consecutive Cases

    by Pär‐Olov Östman, Mats Hellman, Lars Sennerby, Ann Wennerberg

    Background: During the last years, focus has been paid to implant treatment using immediate function protocols, and different approaches to provide patients with temporary constructions have been presented. Most of these techniques involve dental technicians producing the temporary construction, for example, rebuilding existing dentures, acrylic bridges, etc.Purpose: The purpose of this prospective clinical study was to evaluate the clinical outcome of a chair‐side technique of a cost‐effective temporary prosthesis. Fixture survival rate and risk of temporary bridge failure were analyzed.Materials and Methods: Thirty‐seven partially or totally edentate patients (18 female and 19 male; mean age: 66.7 years) treated with chair‐side manufactured temporary restorations (QuickBridge™, BIOMET 3i, Palm Beach, Fl, USA) for immediate loading have been evaluated. The prostheses extended from two unit bridges supported by two implants to full‐arch construction supported by six implants. The temporary prostheses were monitored from the day of surgery and delivery to the time of replacement with a permanent prosthetic construction 3 to 6 months later.Results: No implants were lost during the observation time. One (3%) temporary prosthesis fractured and additional two (6%) loosened during the follow‐up time.Conclusions: The study indicated that the tested chair‐side concept for manufacturing of temporary prosthesis for immediate loading of dental implants is a viable approach.


  • Survival of NobelDirect Implants: An Analysis of 550 Consecutively Placed Implants at 18 Different Clinical Centers

    by Tomas Albrektsson, Jan Gottlow, Luiz Meirelles, Per‐Olov Östman, Antonio Rocci, Lars Sennerby

    Background:  A recently introduced implant, the NobelDirect (Nobel Biocare AB, Göteborg, Sweden), has previously been documented with substantial bone resorption in a large number of operated cases.PurposeL  The aim of this study was to evaluate the failure rate of NobelDirect implants in a retrospective multicenter survey.Materials and Methods:  A total of 550 NobelDirect implants consecutively placed in over 269 patients at 18 centers were evaluated with regard to failure rate after an average follow‐up of about 1 year.Results:  The overall failure percentage was 10.9% (59 failures). The 58 implants not loaded directly showed only one failure (1.7%) versus 58 failures (11.8%) of those implants that were loaded directly. A chemical x‐ray photoelectron spectroscopy analysis of an implant from the original batch showed up to 3.5% silicon at parts of the implants. A retrieval analysis of one implant removed at 2 years after placement demonstrated bone resorption down to the level of the fifth thread.Conclusions:  It is concluded that the NobelDirect implant, if placed with a punch procedure, ground down in situ, and loaded directly, shows an unusually high failure rate at 1 year.


  • Direct loading of Nobel Direct® and Nobel Perfect® one‐piece implants: a 1‐year prospective clinical and radiographic study

    by Per‐Olov Östman, Mats Hellman, Tomas Albrektsson, Lars Sennerby

    Objectives: The aim of this prospective study was to evaluate the Nobel Direct® and Nobel Perfect® one‐piece implants (OPIs) when used for immediate function.Material and methods: Forty‐eight patients were provided with 115 OPIs for loading with a provisional crown or a bridge within 24 h and followed for at least 12 months with clinical and radiographic examinations. A group of 97 patients previously treated under identical conditions by the same team with 380 two‐piece implants (TPIs) for immediate loading in the mandible and maxilla served as the reference group.Results: Six (5.2%) OPIs failed during the follow‐up due to extensive bone loss. Five (1.3%) implants failed in the reference group. After 1 year, the mean marginal bone loss was 2.1 mm (SD 1.3) for OPIs and 0.8 mm (SD 1) for TPIs. 20% of OPIs showed more than 3 mm of bone loss compared with 0.6% for TPIs. When compensating for vertical placement depth, OPIs still showed a lower marginal bone level and thus more exposed threads than TPIs. Depending on the criteria used, the success rate for OPIs was 46.1% or 72.2% compared with 85% or 91.6% for TPIs.Conclusions: The Nobel Direct® and Nobel Perfect® OPIs show lower success rates and more bone resorption than TPIs after 1 year in function. Factors such as implant design, insertion depth, rough surface towards the mucosa, in situ preparation and immediate loading may have an influence on the clinical outcome.