Torben Brender Andersen
Research Subjects
Research Interests
Torben Brender Andersen has a total of 48 co-authors. Here are the top co-authors by number of shared publications:
- Anita Enmark
Luleå University of Technology
12 shared publications Paul F. Schweiger
Lockheed Martin Space Systems Co. (United States)
4 shared publicationsMette Owner-Petersen
Lund Observatory, Box 43, SE-221 00 Lund, Sweden
3 shared publicationsAnita Enmark
Department of Computer Science, Electrical and Space Engineering, Luleå University of Technology, Box 848, SE-921 28 Kiruna, Sweden
2 shared publicationsHolger Riewaldt
Lund Observatory (Sweden)
2 shared publicationsZachary A. Granger
Lockheed Martin Space Systems Co. (United States)
2 shared publications
Latest Publications
- 13 September 2019
- Published by Optica Publishing Group in Optics Letters
- Vol. 44 (18) , 4618-4621
Neural networks for image-based wavefront sensing for astronomy
We study the possibility of using convolutional neural networks for wavefront sensing from a guide star image in astronomical telescopes. We generated a large number of artificial atmospheric wavefront screens and determined associated best-fit Zernike polynomials. We also generated in-focus and out-of-focus point-spread functions. We trained the well-known “Inception” network using the artificial data sets and found that although the accuracy does not permit diffraction-limited correction, the potential improvement in the residual phase error is promising for a telescope in the 2–4 m class.
- 13 September 2019
- Published by Optica Publishing Group in Optics Letters
- Vol. 44 (18) , 4618-4621
Neural networks for image-based wavefront sensing for astronomy
We study the possibility of using convolutional neural networks for wavefront sensing from a guide star image in astronomical telescopes. We generated a large number of artificial atmospheric wavefront screens and determined associated best-fit Zernike polynomials. We also generated in-focus and out-of-focus point-spread functions. We trained the well-known “Inception” network using the artificial data sets and found that although the accuracy does not permit diffraction-limited correction, the potential improvement in the residual phase error is promising for a telescope in the 2–4 m class.
- Open Access
- 10 July 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (15) , 18878-18896
Efficient and robust recurrence relations for the Zernike circle polynomials and their derivatives in Cartesian coordinates
For some time it has been known and recommended that the calculation of Zernike polynomials to radial orders higher than 8 to 10 should be performed using recurrence relations rather than explicit expressions due increasingly large cancellation errors. This paper presents a set of simple recurrence relations that can be used for the unit-normalized Zernike polynomials in polar coordinates and easily adapted to Cartesian coordinates as well. The recurrence relations are also well suited for the calculation of the Cartesian derivatives of the Zernike polynomials. The recurrence relations are easily extended to arbitrarily high orders. Assessments of the precision achievable with standard 64-bit floating point arithmetic show that Zernike polynomials up to radial order 30 can be calculated over the unit disc with errors not exceeding 5E-14, and up to radial order 50 with errors not exceeding 1.2E-13. Comparison with the Zernike capability in OpticStudio (Zemax) shows that the recurrence relations are superior in performance (both speed and precision) over the existing algorithm implemented in the software. General pseudo-code for the calculation of Zernike polynomials and their derivatives is also presented.
- 10 July 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (15) , 18878-18896
Open AccessEfficient and robust recurrence relations for the Zernike circle polynomials and their derivatives in Cartesian coordinates
For some time it has been known and recommended that the calculation of Zernike polynomials to radial orders higher than 8 to 10 should be performed using recurrence relations rather than explicit expressions due increasingly large cancellation errors. This paper presents a set of simple recurrence relations that can be used for the unit-normalized Zernike polynomials in polar coordinates and easily adapted to Cartesian coordinates as well. The recurrence relations are also well suited for the calculation of the Cartesian derivatives of the Zernike polynomials. The recurrence relations are easily extended to arbitrarily high orders. Assessments of the precision achievable with standard 64-bit floating point arithmetic show that Zernike polynomials up to radial order 30 can be calculated over the unit disc with errors not exceeding 5E-14, and up to radial order 50 with errors not exceeding 1.2E-13. Comparison with the Zernike capability in OpticStudio (Zemax) shows that the recurrence relations are superior in performance (both speed and precision) over the existing algorithm implemented in the software. General pseudo-code for the calculation of Zernike polynomials and their derivatives is also presented.
- 23 August 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10375, 9
Camera System MTF: combining optic with detector
MTF is one of the most common metrics used to quantify the resolving power of an optical component. Extensive literature is dedicated to describing methods to calculate the Modulation Transfer Function (MTF) for stand-alone optical components such as a camera lens or telescope, and some literature addresses approaches to determine an MTF for combination of an optic with a detector. The formulations pertaining to a combined electro-optical system MTF are mostly based on theory, and assumptions that detector MTF is described only by the pixel pitch which does not account for wavelength dependencies. When working with real hardware, detectors are often characterized by testing MTF at discrete wavelengths. This paper presents a method to simplify the calculation of a polychromatic system MTF when it is permissible to consider the detector MTF to be independent of wavelength.
- 23 August 2017
- Published by SPIE-Intl Soc Optical Eng
- Vol. 10375, 9
Camera System MTF: combining optic with detector
MTF is one of the most common metrics used to quantify the resolving power of an optical component. Extensive literature is dedicated to describing methods to calculate the Modulation Transfer Function (MTF) for stand-alone optical components such as a camera lens or telescope, and some literature addresses approaches to determine an MTF for combination of an optic with a detector. The formulations pertaining to a combined electro-optical system MTF are mostly based on theory, and assumptions that detector MTF is described only by the pixel pitch which does not account for wavelength dependencies. When working with real hardware, detectors are often characterized by testing MTF at discrete wavelengths. This paper presents a method to simplify the calculation of a polychromatic system MTF when it is permissible to consider the detector MTF to be independent of wavelength.
- 27 September 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9953, 995302
One mirror beam steering: determination of steering mirror parameters from image pointing direction
Mathematical models are used to establish the exact path of a beam reflected by a plane mirror in terms of the mirror geometry descriptors. In particular, the mirror geometry descriptors (tilt angles) are determined as functions of the beam path in image space. This is also useful for determining scan patterns when the mirror is used as a scanning device. These formulations are readily adaptable to commercially available ray tracing programs.
- 27 September 2016
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9953, 995302
One mirror beam steering: determination of steering mirror parameters from image pointing direction
Mathematical models are used to establish the exact path of a beam reflected by a plane mirror in terms of the mirror geometry descriptors. In particular, the mirror geometry descriptors (tilt angles) are determined as functions of the beam path in image space. This is also useful for determining scan patterns when the mirror is used as a scanning device. These formulations are readily adaptable to commercially available ray tracing programs.
- 29 April 2016
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 33 (5) , 984-986
Angularly symmetric splitting of a light beam upon reflection and refraction at an air–dielectric plane boundary: comment
In a recent paper, conditions for achieving equal and opposite angular deflections of a light beam by reflection and refraction at an interface between air and a dielectric were determined [J. Opt. Soc. Am. A 32, 2436 (2015) [CrossRef] ]. The paper gives plots of angles of incidence and refraction as a function of the prism refractive index as well as plots of reflectances and incident linear-polarization azimuth angles as functions of the refractive index. We show here that it is possible to express these quantities as simple algebraic functions of the refractive index.
- 29 April 2016
- Published by Optica Publishing Group in Journal of the Optical Society of America A
- Vol. 33 (5) , 984-986
Angularly symmetric splitting of a light beam upon reflection and refraction at an air–dielectric plane boundary: comment
In a recent paper, conditions for achieving equal and opposite angular deflections of a light beam by reflection and refraction at an interface between air and a dielectric were determined [J. Opt. Soc. Am. A 32, 2436 (2015) [CrossRef] ]. The paper gives plots of angles of incidence and refraction as a function of the prism refractive index as well as plots of reflectances and incident linear-polarization azimuth angles as functions of the refractive index. We show here that it is possible to express these quantities as simple algebraic functions of the refractive index.
- 3 September 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9582, 95820A-95820A-9
Characterization of cryo-vacuum chamber windows for NIRCam instrument alignment and testing
- 3 September 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9582, 95820A-95820A-9
Characterization of cryo-vacuum chamber windows for NIRCam instrument alignment and testing
- 3 September 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9582, 958209-958209-6
Measuring NIRCam's position and orientation in 6 DOF using one reference mirror surface inside an environmental chamber
- 3 September 2015
- Published by SPIE-Intl Soc Optical Eng
- Vol. 9582, 958209-958209-6
Measuring NIRCam's position and orientation in 6 DOF using one reference mirror surface inside an environmental chamber
- 24 August 2015
- Published by Optica Publishing Group in Applied Optics
- Vol. 54 (25) , 7525-7533
Accurate calculation of diffraction-limited encircled and ensquared energy
Mathematical properties of the encircled and ensquared energy functions for the diffraction-limited point-spread function (PSF) are presented. These include power series and a set of linear differential equations that facilitate the accurate calculation of these functions. Asymptotic expressions are derived that provide very accurate estimates for the relative amount of energy in the diffraction PSF that fall outside a square or rectangular large detector. Tables with accurate values of the encircled and ensquared energy functions are also presented.
- 24 August 2015
- Published by Optica Publishing Group in Applied Optics
- Vol. 54 (25) , 7525-7533
Accurate calculation of diffraction-limited encircled and ensquared energy
Mathematical properties of the encircled and ensquared energy functions for the diffraction-limited point-spread function (PSF) are presented. These include power series and a set of linear differential equations that facilitate the accurate calculation of these functions. Asymptotic expressions are derived that provide very accurate estimates for the relative amount of energy in the diffraction PSF that fall outside a square or rectangular large detector. Tables with accurate values of the encircled and ensquared energy functions are also presented.
- 8 September 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8150, 81500E
NIRCam coronagraphic Lyot stop: design, fabrication, and testing
The NIRCam instrument on the James Webb Space Telescope (JWST) will provide a coronagraphic imaging capability to search for extrasolar planets in the 2 - 5 microns wavelength range. This capability is realized by a set of Lyot pupil stops with patterns matching the occulting mask located in the JWST intermediate focal plane in the NIRCam optical system. The complex patterns with transparent apertures are made by photolithographic process using a metal coating in the opaque region. The optical density needs to be high for the opaque region, and transmission needs to be high at the aperture. In addition, the Lyot stop needs to operate under cryogenic conditions. We will report on the Lyot stop design, fabrication and testing in this paper.
- 8 September 2011
- Published by SPIE-Intl Soc Optical Eng
- Vol. 8150, 81500E
NIRCam coronagraphic Lyot stop: design, fabrication, and testing
The NIRCam instrument on the James Webb Space Telescope (JWST) will provide a coronagraphic imaging capability to search for extrasolar planets in the 2 - 5 microns wavelength range. This capability is realized by a set of Lyot pupil stops with patterns matching the occulting mask located in the JWST intermediate focal plane in the NIRCam optical system. The complex patterns with transparent apertures are made by photolithographic process using a metal coating in the opaque region. The optical density needs to be high for the opaque region, and transmission needs to be high at the aperture. In addition, the Lyot stop needs to operate under cryogenic conditions. We will report on the Lyot stop design, fabrication and testing in this paper.