Juliano Fagundes Gonçalves
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Juliano Fagundes Gonçalves has a total of 35 co-authors. Here are the top co-authors by number of shared publications:
- Daniel Milbrath De Leon
Federal University of Rio Grande do Sul
4 shared publications Eduardo A. Perondi
Federal University of Rio Grande do Sul
4 shared publications- Andre Luis Ferreira da Silva2 shared publications
- Emílio Carlos Nelli Silva
Department of Mechatronics and Mechanical Systems Engineering, Polytechnic School of the University of São Paulo, São Paulo, Brazil
2 shared publications - Odair Menuzzi
Science and Technology
2 shared publications Carlos E. de Souza
Federal University of Santa Maria
1 shared publication
Latest Publications
- Open Access
- 20 July 2026
- Published by Elsevier in SSRN Electronic Journal
Improving Mechanical Displacement and Heat Management of SOFC Endplates Through Topology Optimization
Solid oxide fuel cell (SOFC) stacks rely on endplates that demand uniform mechanical pressure and adequate thermal management across the active area. This paper presents a topology optimization framework for SOFC endplates that simultaneously addresses surface displacement homogenization and temperature control. A coupled thermo‐mechanical finite element formulation is combined with a density‐based material model, and the optimization problem minimizes the structural volume subject to local constraints on vertical displacement, von Mises stress, and temperature at the endplate interface. An augmented Lagrangian method handles the large number of pointwise restrictions, while automatic adjoint differentiation provides efficient gradient computation. The framework is implemented entirely with open‐source tools. Three increasingly demanding 2D plane‐strain cases are investigated, differing in thermal boundary conditions and constraint sets. In all scenarios, the optimized designs reduce the vertical interface displacement by two to three orders of magnitude relative to a solid, non‐optimized plate, promoting a more uniform pressure distribution while satisfying the yield criterion and achieving mass reductions of up to 42.5%. When explicit temperature constraints are enforced, the interface temperature is maintained within a narrow band around the operational target. The resulting topologies exhibit hierarchical material layouts that form stiff load paths, stress‐relief features, and preferential thermal channels. The proposed methodology provides a systematic, reproducible design route for high‐temperature electrochemical stacks in which mechanical uniformity and thermal regulation are equally critical.
- 20 July 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessImproving Mechanical Displacement and Heat Management of SOFC Endplates Through Topology Optimization
Solid oxide fuel cell (SOFC) stacks rely on endplates that demand uniform mechanical pressure and adequate thermal management across the active area. This paper presents a topology optimization framework for SOFC endplates that simultaneously addresses surface displacement homogenization and temperature control. A coupled thermo‐mechanical finite element formulation is combined with a density‐based material model, and the optimization problem minimizes the structural volume subject to local constraints on vertical displacement, von Mises stress, and temperature at the endplate interface. An augmented Lagrangian method handles the large number of pointwise restrictions, while automatic adjoint differentiation provides efficient gradient computation. The framework is implemented entirely with open‐source tools. Three increasingly demanding 2D plane‐strain cases are investigated, differing in thermal boundary conditions and constraint sets. In all scenarios, the optimized designs reduce the vertical interface displacement by two to three orders of magnitude relative to a solid, non‐optimized plate, promoting a more uniform pressure distribution while satisfying the yield criterion and achieving mass reductions of up to 42.5%. When explicit temperature constraints are enforced, the interface temperature is maintained within a narrow band around the operational target. The resulting topologies exhibit hierarchical material layouts that form stiff load paths, stress‐relief features, and preferential thermal channels. The proposed methodology provides a systematic, reproducible design route for high‐temperature electrochemical stacks in which mechanical uniformity and thermal regulation are equally critical.
- 23 July 2025
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 303
Topology optimization with pressure loads and finite deformation
- 23 July 2025
- Published by Elsevier in International Journal of Mechanical Sciences
- Vol. 303
Topology optimization with pressure loads and finite deformation
- 18 December 2024
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 67 (12) , 1-28
Design of solid oxide fuel cell (SOFC) channel layout using the topology optimization method with a design variable propagation approach
- 18 December 2024
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 67 (12) , 1-28
Design of solid oxide fuel cell (SOFC) channel layout using the topology optimization method with a design variable propagation approach
- 24 March 2023
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 234 (2) , 1484-1504
Salt reconstruction in full-waveform inversion using topology optimization techniques
SUMMARY: With the increasing advances in the oil and gas industry, seismic imaging near or under salt structures has become an important point in deep-water exploration. Detailed velocity models of these areas are particularly interesting not only to characterize hydrocarbon reservoirs but also to identify potential sites for hydrogen and carbon dioxide storage in offshore salt caverns. Thus, we study the full-waveform inversion for the salt reconstruction in acoustic media with constant density considering the time-harmonic wave propagation in a finite element formulation using the topology optimization (TO) method. This problem is challenging due to the strong velocity contrast between salt bodies and the sedimentary background, in addition to the lack of low-frequency data and the inherent ill-posedness of the inverse problem. In this context, we incorporate techniques from the TO field, usually used in design applications, to overcome or reduce these known problems. We initially defined the squared slowness as a combination of two fields, one related to the salt shape and the other to the background. An interpolation rule based on the solid isotropic material with penalization method, combined with filtering and projection schemes, is used to find the shape of the salt bodies with increased sharpness interfaces. A Helmholtz-type filter is applied to modify the gradient aimed to regularize the problem and provide a more stable way for the salt shape to evolve during the inversion process. In particular, we demonstrate that the proposed approach may be relevant for reconstructing media with salt bodies when a suitable starting model is unavailable, and sharp interfaces are required. In addition, we present inversion results from synthetic data generated by a variable density model to demonstrate the approach capability when subjected to a reconstruction application.
- 24 March 2023
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 234 (2) , 1484-1504
Salt reconstruction in full-waveform inversion using topology optimization techniques
SUMMARY: With the increasing advances in the oil and gas industry, seismic imaging near or under salt structures has become an important point in deep-water exploration. Detailed velocity models of these areas are particularly interesting not only to characterize hydrocarbon reservoirs but also to identify potential sites for hydrogen and carbon dioxide storage in offshore salt caverns. Thus, we study the full-waveform inversion for the salt reconstruction in acoustic media with constant density considering the time-harmonic wave propagation in a finite element formulation using the topology optimization (TO) method. This problem is challenging due to the strong velocity contrast between salt bodies and the sedimentary background, in addition to the lack of low-frequency data and the inherent ill-posedness of the inverse problem. In this context, we incorporate techniques from the TO field, usually used in design applications, to overcome or reduce these known problems. We initially defined the squared slowness as a combination of two fields, one related to the salt shape and the other to the background. An interpolation rule based on the solid isotropic material with penalization method, combined with filtering and projection schemes, is used to find the shape of the salt bodies with increased sharpness interfaces. A Helmholtz-type filter is applied to modify the gradient aimed to regularize the problem and provide a more stable way for the salt shape to evolve during the inversion process. In particular, we demonstrate that the proposed approach may be relevant for reconstructing media with salt bodies when a suitable starting model is unavailable, and sharp interfaces are required. In addition, we present inversion results from synthetic data generated by a variable density model to demonstrate the approach capability when subjected to a reconstruction application.
- 21 July 2020
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 62 (3) , 1041-1059
Identification problem of acoustic media in the frequency domain based on the topology optimization method
- 21 July 2020
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 62 (3) , 1041-1059
Identification problem of acoustic media in the frequency domain based on the topology optimization method
- 13 March 2020
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 62 (1) , 231-248
Stress-based topology optimization of compliant mechanisms design using geometrical and material nonlinearities
- 13 March 2020
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 62 (1) , 231-248
Stress-based topology optimization of compliant mechanisms design using geometrical and material nonlinearities
- 26 October 2018
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 59 (3) , 941-957
Topology optimization of piezoelectric macro-fiber composite patches on laminated plates for vibration suppression
- 26 October 2018
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 59 (3) , 941-957
Topology optimization of piezoelectric macro-fiber composite patches on laminated plates for vibration suppression
- 14 September 2018
- Published by Springer Nature
- p. 523-530
Topology Optimization for Compliance Minimization and Actuator Layout to Vibration Suppress
- 14 September 2018
- Published by Springer Nature
- p. 523-530
Topology Optimization for Compliance Minimization and Actuator Layout to Vibration Suppress
- 2 March 2018
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 58 (3) , 1139-1154
Simultaneous optimization of piezoelectric actuator topology and polarization
- 2 March 2018
- Published by Springer Nature in Structural and Multidisciplinary Optimization
- Vol. 58 (3) , 1139-1154
Simultaneous optimization of piezoelectric actuator topology and polarization
- 6 December 2017
- Published by Springer Nature
- p. 952-966
A Study on the Design of Large Displacement Compliant Mechanisms with a Strength Criteria Using Topology Optimization
- 6 December 2017
- Published by Springer Nature
- p. 952-966
A Study on the Design of Large Displacement Compliant Mechanisms with a Strength Criteria Using Topology Optimization