Samuel Nacivet
Research Subjects
Samuel Nacivet has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Jean Jacques Sinou
Laboratoire de Tribologie et Dynamique des Systèmes (LTDS), UMR 5513, Ecole Centrale Lyon, 36 Avenue Guy de Collongue, 69134 Ecully, France
9 shared publications N. Coudeyras
3 shared publicationsFabrice Thouverez
LTDS Ecole Centrale de Lyon
2 shared publicationsC Pierre
1 shared publicationChristophe Pierre
University of Michigan, Ann Arbor, MI
1 shared publication- E. Denimal
Laboratoire de Tribologie et Dynamique des Systèmes, UMR CNRS 5513, Ecole Centrale de Lyon, Ecully Cedex, France
1 shared publication
Latest Publications
- 22 July 2021
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 144 (2) , 1-20
Prediction of Squeal Instabilities of a Finite Element Model Automotive Brake With Uncertain Structural and Environmental Parameters With a Hybrid Surrogate Model
This study focuses on the prediction of the stability behavior of an industrial automotive brake system under structural and environmental uncertainties. Uncertainties are modeled with a random distribution or an interval and are propagated with a hybrid surrogate model associating polynomial chaos and kriging. The objective is to create a surrogate model of each eigenvalue computed with the complex eigenvalue analysis (CEA). As the modes can be tracked only when unstable, the effective size of the training sets can become extremely small. Despite this limitation, it is shown the hybrid meta-model is still able to predict the stability of the brake system. Moreover, the hybrid meta-model gives a direct access to the mean and variance of the eigenvalues with respect to the design parameters without any additional Monte Carlo simulations (MCS). By considering different probability density function for the friction coefficient, it is shown it has a high influence on the stability and the latter should be accurately estimated.
- 22 July 2021
- Published by ASME International in Journal of Vibration and Acoustics
- Vol. 144 (2) , 1-20
Prediction of Squeal Instabilities of a Finite Element Model Automotive Brake With Uncertain Structural and Environmental Parameters With a Hybrid Surrogate Model
This study focuses on the prediction of the stability behavior of an industrial automotive brake system under structural and environmental uncertainties. Uncertainties are modeled with a random distribution or an interval and are propagated with a hybrid surrogate model associating polynomial chaos and kriging. The objective is to create a surrogate model of each eigenvalue computed with the complex eigenvalue analysis (CEA). As the modes can be tracked only when unstable, the effective size of the training sets can become extremely small. Despite this limitation, it is shown the hybrid meta-model is still able to predict the stability of the brake system. Moreover, the hybrid meta-model gives a direct access to the mean and variance of the eigenvalues with respect to the design parameters without any additional Monte Carlo simulations (MCS). By considering different probability density function for the friction coefficient, it is shown it has a high influence on the stability and the latter should be accurately estimated.
- 17 May 2020
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 100 (4) , 3121-3144
Generalized Modal Amplitude Stability Analysis for the prediction of the nonlinear dynamic response of mechanical systems subjected to friction-induced vibrations
- 17 May 2020
- Published by Springer Nature in Nonlinear Dynamics
- Vol. 100 (4) , 3121-3144
Generalized Modal Amplitude Stability Analysis for the prediction of the nonlinear dynamic response of mechanical systems subjected to friction-induced vibrations
- 1 January 2017
- Published by Elsevier in Applied Acoustics
- Vol. 116, 127-138
Modal Amplitude Stability Analysis and its application to brake squeal
- 1 January 2017
- Published by Elsevier in Applied Acoustics
- Vol. 116, 127-138
Modal Amplitude Stability Analysis and its application to brake squeal
- 1 April 2015
- Published by Elsevier in Applied Acoustics
- Vol. 91, 12-24
Reduction strategy for a brake system with local frictional non-linearities – Application for the prediction of unstable vibration modes
- 1 April 2015
- Published by Elsevier in Applied Acoustics
- Vol. 91, 12-24
Reduction strategy for a brake system with local frictional non-linearities – Application for the prediction of unstable vibration modes
- 13 May 2013
- Published by SAE International in SAE International Journal of Passenger Cars - Mechanical Systems
- Vol. 06 (2) , 1177-1185
Double Tube Shock Absorber Model for Noise and Vibration Analysis
The “structure-borne” noise of the shock absorber is often responsible for undesirable noise in the car interior cabin. These vibrations are attributed to friction, opening/closing of the valves, fluid cavitation or other complex phenomena.Early numerical prediction of the level of these vibrations in the car development process saves time and money. Most of the shock absorber models existing in the literature are limited to analysis of vehicle ride and handling. For noise and vibration analysis, the published works do not explicitly describe any model with its associated assumptions and a clear correlation with the experiments for high frequencies. Moreover there is no interpretation of the physical meaning of the high-frequency content of the response.The objective of the present work is to build a double tube shock absorber model correlated up to 700 Hz. Experimental testing results are presented in this paper in order to put in evidence the non-linear phenomena localized on the piston shock absorber. The model includes the fluid compressible behavior, non-linear flow-rate pressure relationship and spring valve dynamics. Unknown parameters like bulk modulus are identified with experimental data.The numerical results are compared to the experiments, showing that the shock absorber model is able to reproduce very well the local non-linear phenomena. This confirms our hypothesis and improves our knowledge of the potential noise sources in the shock absorber.
- 13 May 2013
- Published by SAE International in SAE International Journal of Passenger Cars - Mechanical Systems
- Vol. 06 (2) , 1177-1185
Double Tube Shock Absorber Model for Noise and Vibration Analysis
The “structure-borne” noise of the shock absorber is often responsible for undesirable noise in the car interior cabin. These vibrations are attributed to friction, opening/closing of the valves, fluid cavitation or other complex phenomena.Early numerical prediction of the level of these vibrations in the car development process saves time and money. Most of the shock absorber models existing in the literature are limited to analysis of vehicle ride and handling. For noise and vibration analysis, the published works do not explicitly describe any model with its associated assumptions and a clear correlation with the experiments for high frequencies. Moreover there is no interpretation of the physical meaning of the high-frequency content of the response.The objective of the present work is to build a double tube shock absorber model correlated up to 700 Hz. Experimental testing results are presented in this paper in order to put in evidence the non-linear phenomena localized on the piston shock absorber. The model includes the fluid compressible behavior, non-linear flow-rate pressure relationship and spring valve dynamics. Unknown parameters like bulk modulus are identified with experimental data.The numerical results are compared to the experiments, showing that the shock absorber model is able to reproduce very well the local non-linear phenomena. This confirms our hypothesis and improves our knowledge of the potential noise sources in the shock absorber.
- 19 August 2012
- Published by ASME International
- p. 159-168
Superelement Reduction of Industrial Finite Element Brake System for a Constrained Harmonic Balance Method
Brake squeal is a ubiquitous disturbance in automotive systems. Facing the complexity and the cost of experimental tests, simulations of brake squeal have become essential as well as to provide a predictive numerical method. Two major approaches exist in the numerical analysis of this phenomenon, the transient analysis and the complex eigenvalue analysis. In this study, the Constrained Harmonic Balance Method is applied on an industrial finite element system in order to estimate the nonlinear stationary responses due to friction induced vibration. This paper aims at explaining how a finite element system was adapted to the CHBM and at analyzing the results. First of all, the method used to reduce a finite element brake system is examined and the contact issue is particularly emphasized. Then, a brief summary of the CHBM is made. Finally, limit cycles are obtained close to the Hopf bifurcation.
- 19 August 2012
- Published by ASME International
- p. 159-168
Superelement Reduction of Industrial Finite Element Brake System for a Constrained Harmonic Balance Method
Brake squeal is a ubiquitous disturbance in automotive systems. Facing the complexity and the cost of experimental tests, simulations of brake squeal have become essential as well as to provide a predictive numerical method. Two major approaches exist in the numerical analysis of this phenomenon, the transient analysis and the complex eigenvalue analysis. In this study, the Constrained Harmonic Balance Method is applied on an industrial finite element system in order to estimate the nonlinear stationary responses due to friction induced vibration. This paper aims at explaining how a finite element system was adapted to the CHBM and at analyzing the results. First of all, the method used to reduce a finite element brake system is examined and the contact issue is particularly emphasized. Then, a brief summary of the CHBM is made. Finally, limit cycles are obtained close to the Hopf bifurcation.
- 1 December 2009
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 328 (4-5) , 520-540
Periodic and quasi-periodic solutions for multi-instabilities involved in brake squeal
- 1 December 2009
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 328 (4-5) , 520-540
Periodic and quasi-periodic solutions for multi-instabilities involved in brake squeal
- 12 October 2009
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 329 (3) , 289-301
Experimental and numerical study of a vibro-impact phenomenon in a gearshift cable
- 12 October 2009
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 329 (3) , 289-301
Experimental and numerical study of a vibro-impact phenomenon in a gearshift cable
- 1 January 2009
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 319 (3-5) , 1175-1199
A new treatment for predicting the self-excited vibrations of nonlinear systems with frictional interfaces: The Constrained Harmonic Balance Method, with application to disc brake squeal
- 1 January 2009
- Published by Elsevier in Journal of Sound and Vibration
- Vol. 319 (3-5) , 1175-1199
A new treatment for predicting the self-excited vibrations of nonlinear systems with frictional interfaces: The Constrained Harmonic Balance Method, with application to disc brake squeal
- 1 January 2009
- Published by Inderscience Publishers in International Journal of Vehicle Design
- Vol. 51 (1/2) , 207-222
Study of the nonlinear stationary dynamic of single and multi-instabilities for disk brake squeal
The focus of this paper is to show and discuss the nonlinear dynamical behaviours of brake system subjected to friction-induced vibration that can be generated due to the co-existence of multi-unstable modes. A finite element model with friction coupling is used to analyse the stability of the brake system and the stationary nonlinear oscillations for squeal noise prediction. The mechanism of squeal instability considers a mode coupling phenomenon that is classically referred to as coalescence.
- 1 January 2009
- Published by Inderscience Publishers in International Journal of Vehicle Design
- Vol. 51 (1/2) , 207-222
Study of the nonlinear stationary dynamic of single and multi-instabilities for disk brake squeal
The focus of this paper is to show and discuss the nonlinear dynamical behaviours of brake system subjected to friction-induced vibration that can be generated due to the co-existence of multi-unstable modes. A finite element model with friction coupling is used to analyse the stability of the brake system and the stationary nonlinear oscillations for squeal noise prediction. The mechanism of squeal instability considers a mode coupling phenomenon that is classically referred to as coalescence.