Gianluca De Masi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Gianluca De Masi has a total of 259 co-authors. Here are the top co-authors by number of shared publications:
- Roberto Cavazzana
Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), Corso Stati Uniti 4
10 shared publications - Luigi Cordaro
Consorzio RFX (CNR, ENEA, INFN, Università di Padova, Acciaierie Venete SpA), C.so Stati Uniti 4, 35127 Padova, Italy
9 shared publications - Emilio Martines
Department of Physics “Giuseppe Occhialini”, University of Milano-Bicocca, Piazza della Scienza 3, 20126 Milan, Italy
8 shared publications - Giuseppe Marchiori
Centro Ricerche Fusione, Universitá di Padova, Corso Stati Uniti, 4, 35127 Padova, Italy
8 shared publications - Matteo Zuin
Consorzio RFX (CNR, ENEA, INFN, Universit di Padova, Acciaierie Venete SpA), Padua, Italy
8 shared publications - Antonio Silva
Universidade de Lisboa Instituto Superior Tecnico
6 shared publications
Latest Publications
- Open Access
- 1 November 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (11) , 115002
Overview of the outcomes of the EUROfusion Enabling Research project on real-time reflectometry plasma tracking for next-generation machines
Reflectometry is anticipated to play a significant role in plasma positioning, shaping, and tracking for DEMOnstration power plant, potentially replacing magnetic diagnostics. We present an overview of the outcomes of the EUROfusion Enabling Research (EnR) project ENR-04-IST-01, a coordinated effort of European experts and developers of reflectometry systems, whose main results were: (i) the proof of principle of a new diagnostic concept able to track and monitor the position and shape of the plasma in the initial stage of the discharge, in the start-up phase, and also at the ramp-down phase; and (ii) the improvement of the capabilities of operation in the stationary phase (flattop) to provide an accurate and precise substitute for the positioning magnetic diagnostics in real-time. Important advances have also been achieved in finite-difference time-domain simulation codes, allowing access to two-dimensional and three-dimensional sophisticated reflectometry simulations; and in the development, manufacturing, and testing of antenna prototypes. An important issue addressed was the synchronisation between different reflectometers with the start of an experimental validation on the Tungsten (W) Environment in Steady-state Tokamak. We also describe the advances in hardware, leading to a redesigned, assembled and tested prototype of a compact coherent fast frequency sweeping radio frequency back-end using commercial monolithic microwave integrated circuits, with the integration of direct digital synthesis as continuing work. Another result was the conception of an integrated design workflow for the design, evaluation and implementation of microwave diagnostic systems and its application in the assessment of plasma position reflectometers for high field and low field sides of the divertor test tokamak.
- 1 November 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (11) , 115002
Open AccessOverview of the outcomes of the EUROfusion Enabling Research project on real-time reflectometry plasma tracking for next-generation machines
Reflectometry is anticipated to play a significant role in plasma positioning, shaping, and tracking for DEMOnstration power plant, potentially replacing magnetic diagnostics. We present an overview of the outcomes of the EUROfusion Enabling Research (EnR) project ENR-04-IST-01, a coordinated effort of European experts and developers of reflectometry systems, whose main results were: (i) the proof of principle of a new diagnostic concept able to track and monitor the position and shape of the plasma in the initial stage of the discharge, in the start-up phase, and also at the ramp-down phase; and (ii) the improvement of the capabilities of operation in the stationary phase (flattop) to provide an accurate and precise substitute for the positioning magnetic diagnostics in real-time. Important advances have also been achieved in finite-difference time-domain simulation codes, allowing access to two-dimensional and three-dimensional sophisticated reflectometry simulations; and in the development, manufacturing, and testing of antenna prototypes. An important issue addressed was the synchronisation between different reflectometers with the start of an experimental validation on the Tungsten (W) Environment in Steady-state Tokamak. We also describe the advances in hardware, leading to a redesigned, assembled and tested prototype of a compact coherent fast frequency sweeping radio frequency back-end using commercial monolithic microwave integrated circuits, with the integration of direct digital synthesis as continuing work. Another result was the conception of an integrated design workflow for the design, evaluation and implementation of microwave diagnostic systems and its application in the assessment of plasma position reflectometers for high field and low field sides of the divertor test tokamak.
- Open Access
- 18 May 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (7)
RFX-MOD2 AND THE NEFERTARI PROJECT - A distributed research network for the study of magnetically confined plasmas for fusion
This paper describes the status of the implementation of the upgrades for the RFX-mod2 device, the second major modification of the Reversed Field eXperiment (RFX). The machine's core update consists of a thin copper stabilizing shell placed inside the vacuum vessel to ensure long-term stability of Resistive Wall Modes (RWM) and enable regimes with fast-rotating tearing modes. A comprehensive modernization of the facility’s technological plants and diagnostics is being carried out within the NEFERTARI project (New Equipment For the Experimental Research and Technological Advancement for the RFX Infrastructure). Funded by the Italian National Recovery and Resilience Plan (NRRP) under Next Generation EU, NEFERTARI aims to strengthen the RFX infrastructure and its network of partners. Significant plant upgrades include: the refurbishment of the main vacuum system and the development of a new Glow Discharge Cleaning (GDC) system based on eight fixed electrodes for more uniform wall conditioning; a major overhaul of the Control and Data Acquisition System, now featuring a high-resolution multichannel acquisition system with over 1500 channels that eliminates the need for analog integrators; the enhancement edge plasma characterization and of core diagnostics, such as the high-repetition-rate (up to 3 kHz) Thomson Scattering system and the expanded Soft X-ray (SXR) tomography; the upgrade of the existing and installation of new reflectometric system; the restoration of the Diagnostic Neutral Beam Injector (DNBI) for spatially resolved ion temperature measurements. Furthermore, the paper highlights the contributions of the Italian laboratory network, including the BiGyM infrastructure for testing innovative plasma-facing components; the ROMAN remote handling facility for in-vessel maintenance development; dedicated laboratories for the development of neutron detectors and for optical diagnostics for the characterization of surfaces, and for high-voltage electrical insulation testing.
- 18 May 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (7)
Open AccessRFX-MOD2 AND THE NEFERTARI PROJECT - A distributed research network for the study of magnetically confined plasmas for fusion
This paper describes the status of the implementation of the upgrades for the RFX-mod2 device, the second major modification of the Reversed Field eXperiment (RFX). The machine's core update consists of a thin copper stabilizing shell placed inside the vacuum vessel to ensure long-term stability of Resistive Wall Modes (RWM) and enable regimes with fast-rotating tearing modes. A comprehensive modernization of the facility’s technological plants and diagnostics is being carried out within the NEFERTARI project (New Equipment For the Experimental Research and Technological Advancement for the RFX Infrastructure). Funded by the Italian National Recovery and Resilience Plan (NRRP) under Next Generation EU, NEFERTARI aims to strengthen the RFX infrastructure and its network of partners. Significant plant upgrades include: the refurbishment of the main vacuum system and the development of a new Glow Discharge Cleaning (GDC) system based on eight fixed electrodes for more uniform wall conditioning; a major overhaul of the Control and Data Acquisition System, now featuring a high-resolution multichannel acquisition system with over 1500 channels that eliminates the need for analog integrators; the enhancement edge plasma characterization and of core diagnostics, such as the high-repetition-rate (up to 3 kHz) Thomson Scattering system and the expanded Soft X-ray (SXR) tomography; the upgrade of the existing and installation of new reflectometric system; the restoration of the Diagnostic Neutral Beam Injector (DNBI) for spatially resolved ion temperature measurements. Furthermore, the paper highlights the contributions of the Italian laboratory network, including the BiGyM infrastructure for testing innovative plasma-facing components; the ROMAN remote handling facility for in-vessel maintenance development; dedicated laboratories for the development of neutron detectors and for optical diagnostics for the characterization of surfaces, and for high-voltage electrical insulation testing.
- Open Access
- 20 January 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (2)
G3C: a non magnetic, reflectometry - based plasma boundary reconstruction algorithm for control purposes
The installation of an advanced Plasma Position Reflectometry system, aimed at complementing magnetic sensors for plasma position and shape control, is foreseen on the DEMOnstration Power Plant (DEMO). For such a system, we presented in 2018 the G3C boundary reconstruction algorithm, based on the plasma-wall distance reflectometric measurements and on the the values of the plasma and Poloidal Field Coils (PFC) currents. This work presents the upgrades implemented to the algorithm and its application to both the DEMO baseline and several non-baseline scenarios. The algorithm is further applied to reconstruct the plasma boundary during a Vertical Displacement Event (VDE). Results indicate that the method is able to estimate plasma shape parameters and position with a remarkable accuracy, provided that reliable reflectometric measurements - within 1 cm accuracy - are used as input. Furthermore, it shows significant robustness to higher measurement errors for what concerns most plasma shape parameters estimation. Overall, G3C proves to be an accurate, reliable and flexible reflectometry-based boundary reconstruction tool.
- 20 January 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (2)
Open AccessG3C: a non magnetic, reflectometry - based plasma boundary reconstruction algorithm for control purposes
The installation of an advanced Plasma Position Reflectometry system, aimed at complementing magnetic sensors for plasma position and shape control, is foreseen on the DEMOnstration Power Plant (DEMO). For such a system, we presented in 2018 the G3C boundary reconstruction algorithm, based on the plasma-wall distance reflectometric measurements and on the the values of the plasma and Poloidal Field Coils (PFC) currents. This work presents the upgrades implemented to the algorithm and its application to both the DEMO baseline and several non-baseline scenarios. The algorithm is further applied to reconstruct the plasma boundary during a Vertical Displacement Event (VDE). Results indicate that the method is able to estimate plasma shape parameters and position with a remarkable accuracy, provided that reliable reflectometric measurements - within 1 cm accuracy - are used as input. Furthermore, it shows significant robustness to higher measurement errors for what concerns most plasma shape parameters estimation. Overall, G3C proves to be an accurate, reliable and flexible reflectometry-based boundary reconstruction tool.
- Open Access
- 1 September 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (09) , C09004
Overview of the studies towards a Plasma Position Reflectometry system for Divertor Test Tokamak (DTT)
Plasma Position Reflectometry (PPR) is taking an important role in next-generation fusion machines, such as DEMO, as a diagnostic to monitor the position and shape of the plasma, complementing magnetic diagnostics. The Divertor Test Tokamak (DTT) facility is the perfect machine to implement, develop, and test PPR systems. Important work is being done to evaluate the performance of a tentative PPR system in DTT, including assessment efforts integrated into the EUROfusion Enabling Research Project (ENR-TEC.01.IST). These efforts involve designing two- and three-dimensional synthetic diagnostics for the Low (LFS) and High Field Sides (HFS), using Finite-Difference Time-Domain codes. This simulation assessment works in parallel with the design of antennas for the LFS and HFS. Their integration in synthetic diagnostics is done through a CAD conversion pipeline. An overview of the progress achieved, together with future work planned, is provided in the present work devoted to the accuracy of the separatrix localisation at different positions around the vessel.
- 1 September 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (09) , C09004
Open AccessOverview of the studies towards a Plasma Position Reflectometry system for Divertor Test Tokamak (DTT)
Plasma Position Reflectometry (PPR) is taking an important role in next-generation fusion machines, such as DEMO, as a diagnostic to monitor the position and shape of the plasma, complementing magnetic diagnostics. The Divertor Test Tokamak (DTT) facility is the perfect machine to implement, develop, and test PPR systems. Important work is being done to evaluate the performance of a tentative PPR system in DTT, including assessment efforts integrated into the EUROfusion Enabling Research Project (ENR-TEC.01.IST). These efforts involve designing two- and three-dimensional synthetic diagnostics for the Low (LFS) and High Field Sides (HFS), using Finite-Difference Time-Domain codes. This simulation assessment works in parallel with the design of antennas for the LFS and HFS. Their integration in synthetic diagnostics is done through a CAD conversion pipeline. An overview of the progress achieved, together with future work planned, is provided in the present work devoted to the accuracy of the separatrix localisation at different positions around the vessel.
- Open Access
- 23 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (13) , 7037
Multimodal Comparison of Cold Atmospheric Plasma Sources for Disinfection
While atmospheric pressure plasma sources are emerging as potentially innovative instruments in medicine, some aspects of the interaction between plasma and biological substrates remain unclear. The high diversity in both sources and applications in the literature, and the lack of a systematic testing protocol, has resulted in a wide variety of devices that cannot be efficiently compared with one another. In this work, an integrated benchmark involving physical, chemical, and biological diagnostics is proposed. The setup is designed to be stable and fixed, while remaining adaptable to different sources. Three different sources, for a total of five configurations, are compared, demonstrating the possibility of obtaining multimodal data. Comparing the biological effects in terms of E. coli abatement between direct and indirect treatments allowed for the exclusion of short-timescale species and phenomena to have a key role in the abatement. The chemical characterisation describes the equilibrium of reactive oxygen and nitrogen species in treated samples, whose presence in the water has been found to be coherent with the plasma operating gas and the nitrogen vibrational temperatures. Nitrate, nitrite and peroxide are excluded from having an autonomous role in the inactivation biochemistry, suggesting the presence of a synergistic effect.
- 23 June 2025
- Published by MDPI AG in Applied Sciences
- Vol. 15 (13) , 7037
Open AccessMultimodal Comparison of Cold Atmospheric Plasma Sources for Disinfection
While atmospheric pressure plasma sources are emerging as potentially innovative instruments in medicine, some aspects of the interaction between plasma and biological substrates remain unclear. The high diversity in both sources and applications in the literature, and the lack of a systematic testing protocol, has resulted in a wide variety of devices that cannot be efficiently compared with one another. In this work, an integrated benchmark involving physical, chemical, and biological diagnostics is proposed. The setup is designed to be stable and fixed, while remaining adaptable to different sources. Three different sources, for a total of five configurations, are compared, demonstrating the possibility of obtaining multimodal data. Comparing the biological effects in terms of E. coli abatement between direct and indirect treatments allowed for the exclusion of short-timescale species and phenomena to have a key role in the abatement. The chemical characterisation describes the equilibrium of reactive oxygen and nitrogen species in treated samples, whose presence in the water has been found to be coherent with the plasma operating gas and the nitrogen vibrational temperatures. Nitrate, nitrite and peroxide are excluded from having an autonomous role in the inactivation biochemistry, suggesting the presence of a synergistic effect.
- Open Access
- 1 May 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (05) , C05030
Performance assessment and integration of the High Field Side Plasma Position Reflectometry system on DTT
The Divertor Tokamak Test (DTT) [1], presently under construction in Frascati (Rome), will be equipped with a Plasma Position Reflectometry (PPR) system. It will be installed on a dedicated poloidal sector and consists of a set of antennas placed at different poloidal positions. Featuring a high temporal and spatial resolution and being suitable for harsh fusion reactor experimental conditions (long pulses, high neutron fluxes), for which magnetic probes performance could be severely limited, reflectometry has been proposed as a good candidate for position control in DEMO. Testing and improving a PPR on DTT is then of the utmost importance. The work here presented describes the advances in the High Field Side (HFS) PPR subsystem design. Given the combination of the diagnostics and installation environment complexity, such a design required an intense simulation and optimization work, started with a feasibility study and a definition of the appropriate antennas to be used [2]. The numerical studies needed to validate the diagnostic performance and to guide the design process are presented and discussed. Results allowed to integrate the diagnostic in the extremely demanding, in terms of space constraints, DTT HFS environment. Moreover, the diagnostic's performance has been assessed for the midplane Line Of Sight (LOS), showing that it is possible to accurately reconstruct the inner midplane density profile of a reference DTT Single Null (SN) scenario.
- 1 May 2025
- Published by IOP Publishing in Journal of Instrumentation
- Vol. 20 (05) , C05030
Open AccessPerformance assessment and integration of the High Field Side Plasma Position Reflectometry system on DTT
The Divertor Tokamak Test (DTT) [1], presently under construction in Frascati (Rome), will be equipped with a Plasma Position Reflectometry (PPR) system. It will be installed on a dedicated poloidal sector and consists of a set of antennas placed at different poloidal positions. Featuring a high temporal and spatial resolution and being suitable for harsh fusion reactor experimental conditions (long pulses, high neutron fluxes), for which magnetic probes performance could be severely limited, reflectometry has been proposed as a good candidate for position control in DEMO. Testing and improving a PPR on DTT is then of the utmost importance. The work here presented describes the advances in the High Field Side (HFS) PPR subsystem design. Given the combination of the diagnostics and installation environment complexity, such a design required an intense simulation and optimization work, started with a feasibility study and a definition of the appropriate antennas to be used [2]. The numerical studies needed to validate the diagnostic performance and to guide the design process are presented and discussed. Results allowed to integrate the diagnostic in the extremely demanding, in terms of space constraints, DTT HFS environment. Moreover, the diagnostic's performance has been assessed for the midplane Line Of Sight (LOS), showing that it is possible to accurately reconstruct the inner midplane density profile of a reference DTT Single Null (SN) scenario.
- 7 December 2024
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 45 (2) , 485-501
Combined Characterization of a Plasma Jet: FTIR, Chemical Surveys and Antibacterial Effect
- 7 December 2024
- Published by Springer Nature in Plasma Chemistry and Plasma Processing
- Vol. 45 (2) , 485-501
Combined Characterization of a Plasma Jet: FTIR, Chemical Surveys and Antibacterial Effect
- Open Access
- 4 June 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (7) , 076032
RFX-mod2 diagnostic capability enhancements for the exploration of multi-magnetic-configurations
The RFX-mod2 device, the upgraded version of the previous RFX-mod with a modified magnetic boundary, is presently under realization and will start to be operated in 2025. Significant upgrades of the diagnostic capabilities have been proposed and are under development. These include a largely increased number of in-vessel magnetic and electrostatic sensors, a new fast reciprocating manipulator for the exploration of the edge plasma in a wide range of experimental conditions, the improved Thomson scattering and soft x-ray diagnostics system for a detailed determination of the behavior of the electron temperature profile, new dedicated systems for the space and time resolved analysis of x-ray spectra and neutron rate, a reflectometric diagnostic for real-time determination of plasma position, two diagnostics devoted to the imaging of light impurities and influxes behavior along with arrays of halo current sensors. These diagnostic upgrades will be accompanied by a significant effort to improve the control of the electron density and of the impurity influxes by means of proper treatment of plasma facing components with in-vessel fixed electrodes distributed over the first wall. The described advancements will allow a deeper understanding of physics phenomena in the wide variety of magnetic configurations, including the tokamak, the reversed-field pinch and the Ultra-low q, which can be produced in RFX-mod2 thanks to its flexibility and unique MHD control capabilities.
- 4 June 2024
- Published by IOP Publishing in Nuclear Fusion
- Vol. 64 (7) , 076032
Open AccessRFX-mod2 diagnostic capability enhancements for the exploration of multi-magnetic-configurations
The RFX-mod2 device, the upgraded version of the previous RFX-mod with a modified magnetic boundary, is presently under realization and will start to be operated in 2025. Significant upgrades of the diagnostic capabilities have been proposed and are under development. These include a largely increased number of in-vessel magnetic and electrostatic sensors, a new fast reciprocating manipulator for the exploration of the edge plasma in a wide range of experimental conditions, the improved Thomson scattering and soft x-ray diagnostics system for a detailed determination of the behavior of the electron temperature profile, new dedicated systems for the space and time resolved analysis of x-ray spectra and neutron rate, a reflectometric diagnostic for real-time determination of plasma position, two diagnostics devoted to the imaging of light impurities and influxes behavior along with arrays of halo current sensors. These diagnostic upgrades will be accompanied by a significant effort to improve the control of the electron density and of the impurity influxes by means of proper treatment of plasma facing components with in-vessel fixed electrodes distributed over the first wall. The described advancements will allow a deeper understanding of physics phenomena in the wide variety of magnetic configurations, including the tokamak, the reversed-field pinch and the Ultra-low q, which can be produced in RFX-mod2 thanks to its flexibility and unique MHD control capabilities.
- Open Access
- 20 February 2024
- Published by Elsevier in Fusion Engineering and Design
- Vol. 201
Technology challenges and integration of the plasma position reflectometer in RFX-mod2
- 20 February 2024
- Published by Elsevier in Fusion Engineering and Design
- Vol. 201
Open AccessTechnology challenges and integration of the plasma position reflectometer in RFX-mod2
- Open Access
Advances, Challenges, and Future Perspectives of Microwave Reflectometry for Plasma Position and Shape Control on Future Nuclear Fusion Devices
Providing energy from fusion and finding ways to scale up the fusion process to commercial proportions in an efficient, economical, and environmentally benign way is one of the grand challenges for engineering. Controlling the burning plasma in real-time is one of the critical issues that need to be addressed. Plasma Position Reflectometry (PPR) is expected to have an important role in next-generation fusion machines, such as DEMO, as a diagnostic to monitor the position and shape of the plasma continuously, complementing magnetic diagnostics. The reflectometry diagnostic uses radar science methods in the microwave and millimetre wave frequency ranges and is envisaged to measure the radial edge density profile at several poloidal angles providing data for the feedback control of the plasma position and shape. While significant steps have already been given to accomplish that goal, with proof of concept tested first in ASDEX-Upgrade and afterward in COMPASS, important, ground-breaking work is still ongoing. The Divertor Test Tokamak (DTT) facility presents itself as the appropriate future fusion device to implement, develop, and test a PPR system, thus contributing to building a knowledge database in plasma position reflectometry required for its application in DEMO. At DEMO, the PPR diagnostic’s in-vessel antennas and waveguides, as well as the magnetic diagnostics, may be exposed to neutron irradiation fluences 5 to 50 times greater than those experienced by ITER. In the event of failure of either the magnetic or microwave diagnostics, the equilibrium control of the DEMO plasma may be jeopardized. It is, therefore, imperative to ensure that these systems are designed in such a way that they can be replaced if necessary. To perform reflectometry measurements at the 16 envisaged poloidal locations in DEMO, plasma-facing antennas and waveguides are needed to route the microwaves between the plasma through the DEMO upper ports (UPs) to the diagnostic hall. The main integration approach for this diagnostic is to incorporate these groups of antennas and waveguides into a diagnostics slim cassette (DSC), which is a dedicated complete poloidal segment specifically designed to be integrated with the water-cooled lithium lead (WCLL) breeding blanket system. This contribution presents the multiple engineering and physics challenges addressed while designing reflectometry diagnostics using radio science techniques. Namely, short-range dedicated radars for plasma position and shape control in future fusion experiments, the advances enabled by the designs for ITER and DEMO, and the future perspectives. One key development is in electronics, aiming at an advanced compact coherent fast frequency sweeping RF back-end [23–100 GHz in few μs] that is being developed at IPFN-IST using commercial Monolithic Microwave Integrated Circuits (MMIC). The compactness of this back-end design is crucial for the successful integration of many measurement channels in the reduced space available in future fusion machines. Prototype tests of these devices are foreseen to be performed in current nuclear fusion machines.
Open AccessAdvances, Challenges, and Future Perspectives of Microwave Reflectometry for Plasma Position and Shape Control on Future Nuclear Fusion Devices
Providing energy from fusion and finding ways to scale up the fusion process to commercial proportions in an efficient, economical, and environmentally benign way is one of the grand challenges for engineering. Controlling the burning plasma in real-time is one of the critical issues that need to be addressed. Plasma Position Reflectometry (PPR) is expected to have an important role in next-generation fusion machines, such as DEMO, as a diagnostic to monitor the position and shape of the plasma continuously, complementing magnetic diagnostics. The reflectometry diagnostic uses radar science methods in the microwave and millimetre wave frequency ranges and is envisaged to measure the radial edge density profile at several poloidal angles providing data for the feedback control of the plasma position and shape. While significant steps have already been given to accomplish that goal, with proof of concept tested first in ASDEX-Upgrade and afterward in COMPASS, important, ground-breaking work is still ongoing. The Divertor Test Tokamak (DTT) facility presents itself as the appropriate future fusion device to implement, develop, and test a PPR system, thus contributing to building a knowledge database in plasma position reflectometry required for its application in DEMO. At DEMO, the PPR diagnostic’s in-vessel antennas and waveguides, as well as the magnetic diagnostics, may be exposed to neutron irradiation fluences 5 to 50 times greater than those experienced by ITER. In the event of failure of either the magnetic or microwave diagnostics, the equilibrium control of the DEMO plasma may be jeopardized. It is, therefore, imperative to ensure that these systems are designed in such a way that they can be replaced if necessary. To perform reflectometry measurements at the 16 envisaged poloidal locations in DEMO, plasma-facing antennas and waveguides are needed to route the microwaves between the plasma through the DEMO upper ports (UPs) to the diagnostic hall. The main integration approach for this diagnostic is to incorporate these groups of antennas and waveguides into a diagnostics slim cassette (DSC), which is a dedicated complete poloidal segment specifically designed to be integrated with the water-cooled lithium lead (WCLL) breeding blanket system. This contribution presents the multiple engineering and physics challenges addressed while designing reflectometry diagnostics using radio science techniques. Namely, short-range dedicated radars for plasma position and shape control in future fusion experiments, the advances enabled by the designs for ITER and DEMO, and the future perspectives. One key development is in electronics, aiming at an advanced compact coherent fast frequency sweeping RF back-end [23–100 GHz in few μs] that is being developed at IPFN-IST using commercial Monolithic Microwave Integrated Circuits (MMIC). The compactness of this back-end design is crucial for the successful integration of many measurement channels in the reduced space available in future fusion machines. Prototype tests of these devices are foreseen to be performed in current nuclear fusion machines.