Afshin Aslian
Afshin Aslian has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
- Chin Joo Tan
Department of Mechanical Engineering, Faculty of Engineering, Universiti Malaya, Kuala Lumpur, Malaysia
4 shared publications Amir Molavi
2 shared publications- Roohollah Rafee
Faculty of Mechanical Engineering, Semnan University, Semnan, Iran
2 shared publications A. Toloei
1 shared publicationAlireza Toloei
Faculty of New Technologies Engineering, Shahid Beheshti University, District 1, Daneshjou Boulevard, Tehran 1983963113, Iran
1 shared publicationB Honarvar
Department of Electrical Engineering, Faculty of Engineering, University of Malaya, 50603 Lembah Pantai, Kuala Lumpur, Malaysia
1 shared publication
Latest Publications
- Open Access
- 26 November 2020
- Published by Wiley in International Journal of Photoenergy
- Vol. 2020, 1-15
Rectangular Glass Optical Fiber for Transmitting Sunlight in a Hybrid Concentrator Photovoltaic and Daylighting System
In this paper, we propose to use glass optical fibers with a rectangular cross-section for the application in a concentrator photovoltaic and daylighting system (CPVD) due to the unique characteristics of rectangular fibers with the capability to provide a uniform rectangular beam shape and a top-hat profile at the output. A mathematical model of rectangular optical fibers has been formulated in this study for different incident angles, and the results are compared with those of round optical fibers. Furthermore, the performance of the bundle of RGOFs is compared with that of the bundle of round optical fibers via simulation by using the ray-tracing method. The mathematical modelling and numerical simulation have demonstrated that the RGOF has advantages in terms of the improvement in relative transmission and reduction in energy leakage for the transmission through the optical fiber. The simulation result also shows that a higher flux of sunlight can be transmitted via the bundle of RGOFs as compared to the bundle of round optical fibers due to the higher coupling efficiency. The experiment results on the relative transmission in different incident angles for both round optical fibers and RGOFs have validated both the simulation and the mathematical modelling. The beam profile of our fabricated RGOF has also been measured via our laboratory facility. The flexibility test on the fabricated RGOF has been carried out to bend at a radius of 150 mm and twist at 90° at a fiber length of 2.2 m.
- 26 November 2020
- Published by Wiley in International Journal of Photoenergy
- Vol. 2020, 1-15
Open AccessRectangular Glass Optical Fiber for Transmitting Sunlight in a Hybrid Concentrator Photovoltaic and Daylighting System
In this paper, we propose to use glass optical fibers with a rectangular cross-section for the application in a concentrator photovoltaic and daylighting system (CPVD) due to the unique characteristics of rectangular fibers with the capability to provide a uniform rectangular beam shape and a top-hat profile at the output. A mathematical model of rectangular optical fibers has been formulated in this study for different incident angles, and the results are compared with those of round optical fibers. Furthermore, the performance of the bundle of RGOFs is compared with that of the bundle of round optical fibers via simulation by using the ray-tracing method. The mathematical modelling and numerical simulation have demonstrated that the RGOF has advantages in terms of the improvement in relative transmission and reduction in energy leakage for the transmission through the optical fiber. The simulation result also shows that a higher flux of sunlight can be transmitted via the bundle of RGOFs as compared to the bundle of round optical fibers due to the higher coupling efficiency. The experiment results on the relative transmission in different incident angles for both round optical fibers and RGOFs have validated both the simulation and the mathematical modelling. The beam profile of our fabricated RGOF has also been measured via our laboratory facility. The flexibility test on the fabricated RGOF has been carried out to bend at a radius of 150 mm and twist at 90° at a fiber length of 2.2 m.
- 10 March 2016
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 87 (5-8) , 1705-1711
Improved seizure resistance of ultra-high-strength steel ironed cups with a lubricant containing SiO2 nanoparticles
- 10 March 2016
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 87 (5-8) , 1705-1711
Improved seizure resistance of ultra-high-strength steel ironed cups with a lubricant containing SiO2 nanoparticles
- 1 January 2016
- Published by Institution of Engineering and Technology (IET)
- p. 42 (8 .)
Theoretical analysis of multi-energy generation in a solar energy system
- 1 January 2016
- Published by Institution of Engineering and Technology (IET)
- p. 42 (8 .)
Theoretical analysis of multi-energy generation in a solar energy system
- Open Access
- 1 January 2016
- Published by Wiley in International Journal of Photoenergy
- Vol. 2016, 1-11
Design and Analysis of an Optical Coupler for Concentrated Solar Light Using Optical Fibers in Residential Buildings
Concentrated sunlight that is transmitted by fiber optics has been used for generating electricity, heat, and daylight. On the other hand, multijunction photovoltaic cells provide high efficiency for generating electricity from highly concentrated sunlight. This study deals with designing and simulating a high-efficiency coupler, employing a mathematical model to connect sunlight with fiber optics for multiple applications. The coupler concentrates and distributes irradiated light from a primary concentrator. In this study, a parabolic dish was used as the primary concentrator, a coupler that contains nine components called a compound truncated pyramid and a cone (CTPC), all of which were mounted on a plate. The material of both the CTPC and the plate was BK7 optical glass. Fiber optics cables and multijunction photovoltaic cells were connected to the cylindrical part of the CTPC. The fibers would transmit the light to the building to provide heat and daylight, whereas multijunction photovoltaic cells generate electricity. Theoretical and simulation results showed high performance of the designed coupler. The efficiency of the coupler was as high as, whereas the rim angle of the dish increased to an optimum angle. Distributed sunlight in the coupler increased the flexibility and simplicity of the design, resulting in a system that provided concentrated electricity, heat, and lighting for residential buildings.- 1 January 2016
- Published by Wiley in International Journal of Photoenergy
- Vol. 2016, 1-11
Open AccessDesign and Analysis of an Optical Coupler for Concentrated Solar Light Using Optical Fibers in Residential Buildings
Concentrated sunlight that is transmitted by fiber optics has been used for generating electricity, heat, and daylight. On the other hand, multijunction photovoltaic cells provide high efficiency for generating electricity from highly concentrated sunlight. This study deals with designing and simulating a high-efficiency coupler, employing a mathematical model to connect sunlight with fiber optics for multiple applications. The coupler concentrates and distributes irradiated light from a primary concentrator. In this study, a parabolic dish was used as the primary concentrator, a coupler that contains nine components called a compound truncated pyramid and a cone (CTPC), all of which were mounted on a plate. The material of both the CTPC and the plate was BK7 optical glass. Fiber optics cables and multijunction photovoltaic cells were connected to the cylindrical part of the CTPC. The fibers would transmit the light to the building to provide heat and daylight, whereas multijunction photovoltaic cells generate electricity. Theoretical and simulation results showed high performance of the designed coupler. The efficiency of the coupler was as high as, whereas the rim angle of the dish increased to an optimum angle. Distributed sunlight in the coupler increased the flexibility and simplicity of the design, resulting in a system that provided concentrated electricity, heat, and lighting for residential buildings. - Open Access
- 9 December 2015
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 103 (1) , 012047
Estimating surface hardening profile of blank for obtaining high drawing ratio in deep drawing process using FE analysis
We constructed an FE axisymmetric model to simulate the effect of partially hardened blanks on increasing the limiting drawing ratio (LDR) of cylindrical cups. We partitioned an arc-shaped hard layer into the cross section of a DP590 blank. We assumed the mechanical property of the layer is equivalent to either DP980 or DP780. We verified the accuracy of the model by comparing the calculated LDR for DP590 with the one reported in the literature. The LDR for the partially hardened blank increased from 2.11 to 2.50 with a 1 mm depth of DP980 ring-shaped hard layer on the top surface of the blank. The position of the layer changed with drawing ratios. We proposed equations for estimating the inner and outer diameters of the layer, and tested its accuracy in the simulation. Although the outer diameters fitted in well with the estimated line, the inner diameters are slightly less than the estimated ones.
- 9 December 2015
- Published by IOP Publishing in IOP Conference Series: Materials Science and Engineering
- Vol. 103 (1) , 012047
Open AccessEstimating surface hardening profile of blank for obtaining high drawing ratio in deep drawing process using FE analysis
We constructed an FE axisymmetric model to simulate the effect of partially hardened blanks on increasing the limiting drawing ratio (LDR) of cylindrical cups. We partitioned an arc-shaped hard layer into the cross section of a DP590 blank. We assumed the mechanical property of the layer is equivalent to either DP980 or DP780. We verified the accuracy of the model by comparing the calculated LDR for DP590 with the one reported in the literature. The LDR for the partially hardened blank increased from 2.11 to 2.50 with a 1 mm depth of DP980 ring-shaped hard layer on the top surface of the blank. The position of the layer changed with drawing ratios. We proposed equations for estimating the inner and outer diameters of the layer, and tested its accuracy in the simulation. Although the outer diameters fitted in well with the estimated line, the inner diameters are slightly less than the estimated ones.