Tekin Şahan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Tekin Şahan has a total of 41 co-authors. Here are the top co-authors by number of shared publications:
- Şakir Yılmaz
Department of Mining Engineering, Faculty of Engineering, Van Yuzuncu Yil University, Van, Turkey
16 shared publications Ümit Ecer
6 shared publications- Nahit Aktas
Van Yuzuncu Yil Universitesi
5 shared publications - Ümit Ecer
Department of Chemical Engineering, Institute of Natural and Applied Sciences, Van Yuzuncu Yil University, Van, Turkey
5 shared publications Adem Zengin
4 shared publications- Adem Zengin
Faculty of Science Department of Chemistry Van Yüzüncü Yıl University Van Turkey
4 shared publications
Latest Publications
- 31 March 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (61) , 23620-23632
Fabrication and characterization of poly(tannic acid) coated magnetic clay decorated with cobalt nanoparticles for NaBH4 hydrolysis: RSM-CCD based modeling and optimization
- 31 March 2023
- Published by Elsevier in International Journal of Hydrogen Energy
- Vol. 48 (61) , 23620-23632
Fabrication and characterization of poly(tannic acid) coated magnetic clay decorated with cobalt nanoparticles for NaBH4 hydrolysis: RSM-CCD based modeling and optimization
- 18 August 2022
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 13 (3) , 2469-2486
Improved anaerobic digestion activity of poultry dung with pumice-supported trace elements: focus on the statistical optimization approach
- 18 August 2022
- Published by Springer Nature in Biomass Conversion and Biorefinery
- Vol. 13 (3) , 2469-2486
Improved anaerobic digestion activity of poultry dung with pumice-supported trace elements: focus on the statistical optimization approach
- 16 June 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (52) , 79375-79387
Decolorization of Rhodamine B by silver nanoparticle–loaded magnetic sporopollenin: characterization and process optimization
Silver nanoparticles (Ag NPs) were reduced on the surface of magnetic sporopollenin (Fe3O4@SP) modified with poly-dopamine to enhance the degradation capability for Rhodamine B (RhB). The polydopamine-coated Fe3O4@SP (PDA@ Fe3O4@SP) acts as a self-reducing agent for Ag+ ions to Ag0. The structural properties of the synthesized nanocomposite were determined using Fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), and vibrating sample magnetometer (VSM). The systematic study of the degradation process was performed using Response Surface Methodology (RSM) to determine the relationship between the four process variables, namely, initial RhB concentration, NaBH4 amount, catalyst amount, and time. Optimum points were determined for these four parameters using both matrix and numerical optimization methods. Under optimum conditions, RhB was decolorized with a yield of 98.11%. The apparent activation energy (Ea) and rate constant (k) for the degradation were 24.13 kJ/mol and 0.77 min−1, respectively. The reusability studies of the Ag@PDA@Fe3O4@SP exhibited more than 85% degradation ability of the dye even after five cycles. As a result, Ag@PDA@Fe3O4@SP possessed high catalytic activity, fast reduction rate, good reusability, easy separation, and simple preparation, endowing this catalyst to be used as a promising catalyst for the decolorization of dyes in aqueous solutions.
- 16 June 2022
- Published by Springer Nature in Environmental Science and Pollution Research
- Vol. 29 (52) , 79375-79387
Decolorization of Rhodamine B by silver nanoparticle–loaded magnetic sporopollenin: characterization and process optimization
Silver nanoparticles (Ag NPs) were reduced on the surface of magnetic sporopollenin (Fe3O4@SP) modified with poly-dopamine to enhance the degradation capability for Rhodamine B (RhB). The polydopamine-coated Fe3O4@SP (PDA@ Fe3O4@SP) acts as a self-reducing agent for Ag+ ions to Ag0. The structural properties of the synthesized nanocomposite were determined using Fourier transform infrared spectrometry (FTIR), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray powder diffraction (XRD), inductively coupled plasma mass spectrometry (ICP-MS), and vibrating sample magnetometer (VSM). The systematic study of the degradation process was performed using Response Surface Methodology (RSM) to determine the relationship between the four process variables, namely, initial RhB concentration, NaBH4 amount, catalyst amount, and time. Optimum points were determined for these four parameters using both matrix and numerical optimization methods. Under optimum conditions, RhB was decolorized with a yield of 98.11%. The apparent activation energy (Ea) and rate constant (k) for the degradation were 24.13 kJ/mol and 0.77 min−1, respectively. The reusability studies of the Ag@PDA@Fe3O4@SP exhibited more than 85% degradation ability of the dye even after five cycles. As a result, Ag@PDA@Fe3O4@SP possessed high catalytic activity, fast reduction rate, good reusability, easy separation, and simple preparation, endowing this catalyst to be used as a promising catalyst for the decolorization of dyes in aqueous solutions.
- 30 April 2021
- Published by Kyrgyz-Turkish Manas University in MANAS Journal of Engineering
- Vol. 9 (Special 1) , 1-9
An optimization study for bio-removal of lead from aqueous environments by alkali modified Polyporus Squamosus
Rapidly increasing industrialization and urbanization cause serious environmental pollution. Discharge of polluting material from various industries such as smelting, mining, ore processing, and metal plating into the environment without treatment causes serious pollution and can have dangerous effects on the environmental balance. The utilization of low-cost adsorbents from biological materials as a replacement for costly traditional methods for adsorption of heavy metal pollutants from wastewater was reviewed. This study aimed to investigate the biosorption of Pb(II) ions from aqueous solutions with NaOH-modified Polyporus squamosus biosorbent and optimize the biosorption conditions. Firstly, the parameters most influencing the response of the biosorption for Pb(II) (initial Pb(II) concentration (Co), pH, temperature and biomass dose) were determined using Central Composite Design (CCD). The optimum conditions were evaluated as 60.76 mg/L, 6.3, 25 °C, and 0.23 g for Co, initial pH, temperature and biomass dose, respectively. From the optimum conditions, the adsorption yield and the adsorption capacity were obtained as 93.8% and 23.63 mg/g, respectively.
- 30 April 2021
- Published by Kyrgyz-Turkish Manas University in MANAS Journal of Engineering
- Vol. 9 (Special 1) , 1-9
An optimization study for bio-removal of lead from aqueous environments by alkali modified Polyporus Squamosus
Rapidly increasing industrialization and urbanization cause serious environmental pollution. Discharge of polluting material from various industries such as smelting, mining, ore processing, and metal plating into the environment without treatment causes serious pollution and can have dangerous effects on the environmental balance. The utilization of low-cost adsorbents from biological materials as a replacement for costly traditional methods for adsorption of heavy metal pollutants from wastewater was reviewed. This study aimed to investigate the biosorption of Pb(II) ions from aqueous solutions with NaOH-modified Polyporus squamosus biosorbent and optimize the biosorption conditions. Firstly, the parameters most influencing the response of the biosorption for Pb(II) (initial Pb(II) concentration (Co), pH, temperature and biomass dose) were determined using Central Composite Design (CCD). The optimum conditions were evaluated as 60.76 mg/L, 6.3, 25 °C, and 0.23 g for Co, initial pH, temperature and biomass dose, respectively. From the optimum conditions, the adsorption yield and the adsorption capacity were obtained as 93.8% and 23.63 mg/g, respectively.
- 21 December 2020
- Published by Kyrgyz-Turkish Manas University in MANAS Journal of Engineering
- Vol. 8 (2) , 125-131
Effective clay material enriched with thiol groups for Zn(II) removal from aqueous media: A statistical approach based on response surface methodology
In the present work, the removal of Zn(II) ions from aquatic environments onto 3-mercaptopropyl trimethoxysilane modified kaolin (MK) was investigated in a batch system. Moreover, the optimization and effects of independent parameters such as pH, initial Zn(II) concentration (Co, mg/L) and contact time (min) on the uptake of Zn(II) onto MK were examined by response surface methodology (RSM). Central composite design (CCD) in RSM, the most popular statistical technique, was successfully applied to optimize and model the selected parameters (pH, Co, contact time) for Zn(II)% adsorption onto MK. The number of experiments based on CDD was 20, a total of 20 sets which included fourteen factorial points and six center points were performed to obtain the maximum Zn(II) uptake from aqueous solutions. The optimum points obtained from CCD were 6.39, 50.09 mg/L and 76.10 min for pH, Co, and contact time, in their given order. In these optimal conditions, the maximum removal percentage was found to be 86.19%. The results indicated that the removal yield of Zn(II) from aqueous media onto MK was successfully performed by CCD in RSM. It can be concluded that MK is also a promising material for the uptake of other heavy metals similar to Zn.
- 21 December 2020
- Published by Kyrgyz-Turkish Manas University in MANAS Journal of Engineering
- Vol. 8 (2) , 125-131
Effective clay material enriched with thiol groups for Zn(II) removal from aqueous media: A statistical approach based on response surface methodology
In the present work, the removal of Zn(II) ions from aquatic environments onto 3-mercaptopropyl trimethoxysilane modified kaolin (MK) was investigated in a batch system. Moreover, the optimization and effects of independent parameters such as pH, initial Zn(II) concentration (Co, mg/L) and contact time (min) on the uptake of Zn(II) onto MK were examined by response surface methodology (RSM). Central composite design (CCD) in RSM, the most popular statistical technique, was successfully applied to optimize and model the selected parameters (pH, Co, contact time) for Zn(II)% adsorption onto MK. The number of experiments based on CDD was 20, a total of 20 sets which included fourteen factorial points and six center points were performed to obtain the maximum Zn(II) uptake from aqueous solutions. The optimum points obtained from CCD were 6.39, 50.09 mg/L and 76.10 min for pH, Co, and contact time, in their given order. In these optimal conditions, the maximum removal percentage was found to be 86.19%. The results indicated that the removal yield of Zn(II) from aqueous media onto MK was successfully performed by CCD in RSM. It can be concluded that MK is also a promising material for the uptake of other heavy metals similar to Zn.
- 30 October 2020
- Published by Taylor & Francis in International Journal of Environmental Analytical Chemistry
- Vol. 102 (19) , 7779-7799
Investigation of Mercury(II) and Arsenic(V) adsorption onto sulphur functionalised pumice: a response surface approach for optimisation and modelling
Recently, millions of people are under the harmful influences of seriously toxic metals, all of which lead to irreversible damages to nature and living species’ health. Therefore, the development of novel adsorbents with high affinity for target metals is critical to their removal from aqueous media. In this study, the effect of initial metal concentration (Co), initial pH, adsorbent dosage and contact time for Hg(II) and As(V) adsorption were investigated using the Central Composite Design. In this context, pumice minerals with surface enriched by -SH groups(P-SH) were prepared with an effective and simple chemical method. As a result of the experimental studies, the optimum points for parameters affecting the adsorption of both metals were obtained with the model equation produced via Response Surface Methodology (RSM). With the numerical optimisation, the optimum values for Hg(II) removal were 6.33, 36.94 mg/L, 0.15 g and 120 min., and the optimum values for As(V) removal were 3.94, 7.17 mg/L, 0.15 g and 155.4 min. for initial pH, Co, adsorbent dosage, and contact time, respectively. Hg(II) and As(V) adsorption yield in the obtained optimum conditions were determined as 92.14% and 88.02%, respectively. Under the optimum conditions, kinetic and isotherm studies were carried out for adsorption of both metals with P-SH. It was observed that the adsorption kinetics data for both metals were consistent with the pseudo-second-order equation and equilibrium data compatible with Freundlich and Langmuir isotherm models.Given all this, P-SH is thought to have potential applications for removing heavy metals from wastewater and will have important contributions to similar studies to be conducted.
- 30 October 2020
- Published by Taylor & Francis in International Journal of Environmental Analytical Chemistry
- Vol. 102 (19) , 7779-7799
Investigation of Mercury(II) and Arsenic(V) adsorption onto sulphur functionalised pumice: a response surface approach for optimisation and modelling
Recently, millions of people are under the harmful influences of seriously toxic metals, all of which lead to irreversible damages to nature and living species’ health. Therefore, the development of novel adsorbents with high affinity for target metals is critical to their removal from aqueous media. In this study, the effect of initial metal concentration (Co), initial pH, adsorbent dosage and contact time for Hg(II) and As(V) adsorption were investigated using the Central Composite Design. In this context, pumice minerals with surface enriched by -SH groups(P-SH) were prepared with an effective and simple chemical method. As a result of the experimental studies, the optimum points for parameters affecting the adsorption of both metals were obtained with the model equation produced via Response Surface Methodology (RSM). With the numerical optimisation, the optimum values for Hg(II) removal were 6.33, 36.94 mg/L, 0.15 g and 120 min., and the optimum values for As(V) removal were 3.94, 7.17 mg/L, 0.15 g and 155.4 min. for initial pH, Co, adsorbent dosage, and contact time, respectively. Hg(II) and As(V) adsorption yield in the obtained optimum conditions were determined as 92.14% and 88.02%, respectively. Under the optimum conditions, kinetic and isotherm studies were carried out for adsorption of both metals with P-SH. It was observed that the adsorption kinetics data for both metals were consistent with the pseudo-second-order equation and equilibrium data compatible with Freundlich and Langmuir isotherm models.Given all this, P-SH is thought to have potential applications for removing heavy metals from wastewater and will have important contributions to similar studies to be conducted.