L. M. Bondarenko
Research Subjects
L. M. Bondarenko has a total of 10 co-authors. Here are the top co-authors by number of shared publications:
- Vladimir Bohomaz
Ukrainian State University of Science and Technologies
2 shared publications A. P. Buratynskyi
Державний вищий навчальний заклад «Придніпровська державна академія будівництва та архітектури
1 shared publicationH. K. Diomin
Державний вищий навчальний заклад «Придніпровська державна академія будівництва та архітектури
1 shared publication- Kazimir Hlavatskyi
Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan
1 shared publication - M. G. Brylyova
Dnipropetrovsk National University of Railway Transport named after Academician V. Lazaryan
1 shared publication - M. V. Ocheretniuk
Ukrainian State University of Science and Technologies
1 shared publication
Latest Publications
- Open Access
- 10 November 2019
- Published by SHEE Prydniprovska State Academy of Civil Engineering and Architecture in Bulletin of Prydniprovs’ka State Academy of Civil Engineering and Architecture
- No. 5,p. 18-23
Rolling resistance of mechanism with point and linear contact scheme
Опір коченню в механізмах з точковими та лінійними схемами дотику
- 10 November 2019
- Published by SHEE Prydniprovska State Academy of Civil Engineering and Architecture in Bulletin of Prydniprovs’ka State Academy of Civil Engineering and Architecture
- No. 5,p. 18-23
Open AccessRolling resistance of mechanism with point and linear contact scheme
Опір коченню в механізмах з точковими та лінійними схемами дотику
- Open Access
- 13 March 2019
- Published by Ukrainian State University of Science and Technologies in Science and Transport Progress
- No. 1(79),p. 102-116
ANALYTICAL DETERMINATION OF THE REDUCED ROTATIONAL RESISTANCE COEFFICIENT OF THE CONSTRUCTION MACHINE SLEWING GEAR
Purpose. Designing new models of construction machines is closely related to the development of slewing gear, and that, in turn, has a drive whose power and dimensions depend on the rotational resistance and the reduced friction coefficient in the units. The absence of analytical dependencies for determining the reduced coefficient of friction for the rotation of construction machines, first, restricts the designer's ability to select materials, and secondly, does not allow the adoption of optimal design solutions. Therefore, the purpose of the article is to find analytical solutions to determine the rotational resistance in the slewing gear of construction machines, which allows projecting more advanced gears and machines in general. Existing techniques are based on empirical dependencies and experimental coefficients that reduce the accuracy of calculations, increase the size and cost of work. It is proposed to improve the accuracy and simplify the process of determining the rotational resistance and the magnitude of the reduced rotational resistance coefficient of the building tower cranes. Methodology. The set objectives can be achieved by means of analytical dependencies for determination of rolling friction coefficients over linear and point contacts. This will enables to find the more accurate value of the resistance coefficient, and the constructor during the calculations to take targeted measures to reduce it, using the mechanical constants of materials of the units and their geometric parameters. The calculation is based on Hertz contact deformation theory and the body point plane motion theory. Findings. The obtained dependencies will allow analytically to find the resistance of rolling resistance of rollers in construction machines with fixed and rotating pillars, with circular rotary devices, as well as in ball and roller slewing rings. The calculated values of the rotational resistance coefficients for some types of mechanisms give similar values with those recommended, while for others they significantly differ and require their refinement in reference values. Originality of the work consists in the use of analytical dependences for determining the reduced coefficient of the rotational resistance over linear and point contacts using Hertz contact deformation theory and Tabor partial analytic dependencies theory. Practical value. The obtained dependencies will allow to design new types of slewing gear units of the construction machines and to reveal the additional rotational resistances.
- 13 March 2019
- Published by Ukrainian State University of Science and Technologies in Science and Transport Progress
- No. 1(79),p. 102-116
Open AccessANALYTICAL DETERMINATION OF THE REDUCED ROTATIONAL RESISTANCE COEFFICIENT OF THE CONSTRUCTION MACHINE SLEWING GEAR
Purpose. Designing new models of construction machines is closely related to the development of slewing gear, and that, in turn, has a drive whose power and dimensions depend on the rotational resistance and the reduced friction coefficient in the units. The absence of analytical dependencies for determining the reduced coefficient of friction for the rotation of construction machines, first, restricts the designer's ability to select materials, and secondly, does not allow the adoption of optimal design solutions. Therefore, the purpose of the article is to find analytical solutions to determine the rotational resistance in the slewing gear of construction machines, which allows projecting more advanced gears and machines in general. Existing techniques are based on empirical dependencies and experimental coefficients that reduce the accuracy of calculations, increase the size and cost of work. It is proposed to improve the accuracy and simplify the process of determining the rotational resistance and the magnitude of the reduced rotational resistance coefficient of the building tower cranes. Methodology. The set objectives can be achieved by means of analytical dependencies for determination of rolling friction coefficients over linear and point contacts. This will enables to find the more accurate value of the resistance coefficient, and the constructor during the calculations to take targeted measures to reduce it, using the mechanical constants of materials of the units and their geometric parameters. The calculation is based on Hertz contact deformation theory and the body point plane motion theory. Findings. The obtained dependencies will allow analytically to find the resistance of rolling resistance of rollers in construction machines with fixed and rotating pillars, with circular rotary devices, as well as in ball and roller slewing rings. The calculated values of the rotational resistance coefficients for some types of mechanisms give similar values with those recommended, while for others they significantly differ and require their refinement in reference values. Originality of the work consists in the use of analytical dependences for determining the reduced coefficient of the rotational resistance over linear and point contacts using Hertz contact deformation theory and Tabor partial analytic dependencies theory. Practical value. The obtained dependencies will allow to design new types of slewing gear units of the construction machines and to reveal the additional rotational resistances.
- Open Access
- 7 May 2018
- Published by Ukrainian State University of Science and Technologies in Science and Transport Progress
- No. 2(74),p. 124-132
EFFECT OF RESISTANCE TO ROLLING ON THE DYNAMICS OF THE LIFTING MECHANISMS OF THE TRANSPORTING MAC
EFFECT OF RESISTANCE TO ROLLING ON THE DYNAMICS OF THE LIFTING MECHANISMS OF THE TRANSPORTING MAC
- 7 May 2018
- Published by Ukrainian State University of Science and Technologies in Science and Transport Progress
- No. 2(74),p. 124-132
Open AccessEFFECT OF RESISTANCE TO ROLLING ON THE DYNAMICS OF THE LIFTING MECHANISMS OF THE TRANSPORTING MAC
EFFECT OF RESISTANCE TO ROLLING ON THE DYNAMICS OF THE LIFTING MECHANISMS OF THE TRANSPORTING MAC
- Open Access
- 4 September 2017
- Published by Ukrainian State University of Science and Technologies in Science and Transport Progress
- No. 4(70),p. 71-79
THE RELATIONSHIP BETWEEN STIFFNESS LOSSES AND LOSSES IN BEARINGS OF ROPE BLOCKS
Purpose. To determine the efficiency of rope blocks, it is necessary to determine the stiffness coefficient of the ropes of blocks, taking into account the classification group of the mechanism and the wrapping angle of a block by a rope. At this one should use well-tested values of the efficiency coefficients of the rope blocks, taking into account the wrapping angle of a block by a rope and the analytically found friction coefficients of the rolling bearings given to the trunnion. Methodology. The work presents the analytical method of determining the coefficient of bearing resistance of the block when it is rotated by both the inner and outer cages, as well as the design scheme of the bearing of the block. Findings. The analysis of the lubrication method effect, the operating mode of the mechanism and the wrapping angle of a block by a rope on losses in bearings was carried out for rope blocks. The corresponding comparative tables of losses are given. Analysis of the obtained calculation results allows us to establish: 1) the main resistance affecting the cable blocks efficiency is the resistance in bearings; 2) the second largest component is the stiffness losses, depending on the operating mode, the wrapping angle of a block by a rope, the type of bearing lubrication; 3) the block efficiency when rotating the inner cage is higher than rotating the outer one by about 3% with thick lubrication and 1M mode; 4) in the sequential location of assemblies with a rolling bearing, it is necessary to strive for the design of the assembly in which the inner cage rotates; 5) with the number of blocks up to 5, one can use the recommended definitions of block bearings in the literature with an error in the efficiency value of up to 10%. Originality. The authors obtained values of resistances in the rolling bearings of the rope blocks and stiffness losses due to the girth of the block by the rope. In this case, dependences were used to determine the coefficient of rolling friction, obtained using the Hertz analytic dependences on determination of contact stresses and deformations, as well as the experimental values of the coefficient of rolling friction for the blocks. Practical value. The resistance values obtained by the authors can be used for refined calculations of the mechanisms of machines.
- 4 September 2017
- Published by Ukrainian State University of Science and Technologies in Science and Transport Progress
- No. 4(70),p. 71-79
Open AccessTHE RELATIONSHIP BETWEEN STIFFNESS LOSSES AND LOSSES IN BEARINGS OF ROPE BLOCKS
Purpose. To determine the efficiency of rope blocks, it is necessary to determine the stiffness coefficient of the ropes of blocks, taking into account the classification group of the mechanism and the wrapping angle of a block by a rope. At this one should use well-tested values of the efficiency coefficients of the rope blocks, taking into account the wrapping angle of a block by a rope and the analytically found friction coefficients of the rolling bearings given to the trunnion. Methodology. The work presents the analytical method of determining the coefficient of bearing resistance of the block when it is rotated by both the inner and outer cages, as well as the design scheme of the bearing of the block. Findings. The analysis of the lubrication method effect, the operating mode of the mechanism and the wrapping angle of a block by a rope on losses in bearings was carried out for rope blocks. The corresponding comparative tables of losses are given. Analysis of the obtained calculation results allows us to establish: 1) the main resistance affecting the cable blocks efficiency is the resistance in bearings; 2) the second largest component is the stiffness losses, depending on the operating mode, the wrapping angle of a block by a rope, the type of bearing lubrication; 3) the block efficiency when rotating the inner cage is higher than rotating the outer one by about 3% with thick lubrication and 1M mode; 4) in the sequential location of assemblies with a rolling bearing, it is necessary to strive for the design of the assembly in which the inner cage rotates; 5) with the number of blocks up to 5, one can use the recommended definitions of block bearings in the literature with an error in the efficiency value of up to 10%. Originality. The authors obtained values of resistances in the rolling bearings of the rope blocks and stiffness losses due to the girth of the block by the rope. In this case, dependences were used to determine the coefficient of rolling friction, obtained using the Hertz analytic dependences on determination of contact stresses and deformations, as well as the experimental values of the coefficient of rolling friction for the blocks. Practical value. The resistance values obtained by the authors can be used for refined calculations of the mechanisms of machines.