YKYevhen Kharchenko

Yevhen Kharchenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yevhen Kharchenko has a total of 28 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Modeling of asynchronous motor vibrations

    by Yevhen Kharchenko, Vasyl Tchaban, Dmytro Butrynskyi, Andriy Bilovus, Andriy Okhrymovych

    A mathematical model of dynamic processes in asynchronous motors that takes into account interrconnection between electromagnetic phenomena in electric machine and mechanical oscillation is considered. For motors of the most common designs, it is assumed that the axis of rotation of the rotor relatively to the stator is immovable; the stator is based on flexible supports. The results of calculations of vibration processes in asynchronous motors are presented. In particular, the influence of stiffness-dissipative parameters of stator supports on the maximum values of forces in stator supports and the angular displacements of the stator are analyzed.


  • The influence of the edge effect under plane specimens tension on polymer composite strength characteristics

    by М. М. Hvozdiuk, О. P. Maksymenko, Ye. V. Kharchenko, V. М. Palukh

    The influence of the width of the edge effect zone in a plane sample of a polymer composite on the results of determining the tensile strength of the material is analyzed. A method for engineering assessment and determining the size of this zone by a non-contact optical-digital method, based on digital image correlation, is proposed. Experimental studies of the ELUR–008P/BN layered composite, symmetrically reinforced with high-modulus carbon fibers with a reinforcement arrangement scheme [(±45°)12], were conducted. The experimental results obtained using modified correlation algorithms for processing digital images were compared with the data determined by the standard experimental and computational method.

  • Influence of the edge effect under plane specimens tension on the polymer composites’ strength characteristics

    by M. M. Hvozdiuk, O. P. Maksymenko, Ye. V. Kharchenko, V. M. Paliukh

  • Open Access

    Analysis of transverse oscillations of drilling rig derrick as Timoshenko beam with variable parameters along the length

    by Yevhen Kharchenko, Andriy Bilovus

    Free and forced transverse oscillations of a drilling rig tower are considered. The computational model is represented as a Timoshenko beam with variable bending stiffness, running mass, and longitudinal force along the length. It is assumed that the tower is mounted on a rigid platform supported...

  • Open Access

    Influence of Nonstationary Processes in Drill Rigs on the Durability of Structural Elements

    by Yevhen Kharchenko, Yaroslav Blikharskyy, Andriy Bilovus, Volodymyr Vira, Jacek Selejdak, Zinoviy Blikharskyy

    Assessing the effects that nonstationary dynamic processes have on the durability of structural elements belongs to an important trend in modern dynamics and technical diagnostics of machines. Normally, fatigue strength calculations are performed taking into account only periodically variable stresses, as steady operating modes of machines are much longer in comparison with transient modes. However, a significant role in fatigue failure in machines and engineering structures is also played by nonstationary loads. This is explained by emerging intensive oscillations in the mechanical system during accelerating, braking, or changing the operation mode of a machine unit, which often lead to the accumulation of fatigue damages in the materials of parts in heavy loaded assemblies. The combination of stationary and nonstationary dynamic loads manifests itself, particularly in drilling rigs, where technological cycles include steady motion modes, starts, and stops. This paper represents a generalized mathematical model describing nonstationary processes in the lift system of a drill rig, which considers the relationship between electromagnetic processes in asynchronous motors and mechanical oscillatory phenomena, with the purpose of determining dynamic loads and stresses in structural elements of the rigs. Nonlinear physical systems include mechanical members with both concentrated and clearly expressed distributed parameters. The durability of structural elements is evaluated by means of a computer algorithm for analysis of crack growth rates using the NASGRO equation obtained with the presence of plastic deformation zones. An example of the crown block axis illustrates the influence of nonstationary dynamic processes in drill rigs on the durability of structural elements.

  • MODELING OF FREE AND FORCED LONGITUDINAL OSCILLATIONS OF A STRAIGHT ROD USING THE DIRECT DISCRETIZATION METHOD

    by Yevhen Kharchenko, Andriy Bilovus

    In the study of the dynamics of mechanical systems with distributed parameters, the discretization of partial differential equations by the finite element method, finite difference method, or boundary element method is widely used. This makes it possible to simplify the analysis of dynamic processes by reducing it to solving a system of ordinary differential equations. The aim of this paper is to mathematically substantiate the method of direct discretization of long-dimensional elastic links as applied to free and forced longitudinal oscillations of a straight rod as a mechanical system with distributed parameters, and to investigate the convergence of the method in determining the natural frequencies and amplitudes of forced oscillations of mechanical systems. The method of direct discretization is considered in the application to a rod with distributed parameters, which performs longitudinal oscillations. It is shown that by mathematical discretization of the wave equation, the boundary value problem can be reduced to the analysis of oscillatory phenomena in a chain mechanical system of material points. The formulas for determining the masses of the inertial elements of the computational model and the stiffness coefficients of the elastic connections are given. The convergence of the method is investigated by determining the natural frequencies of oscillations of a rod with free ends, as well as with one end clamped and the other end free, and comparing the approximate results of calculations with the exact results. The effect of the number of degrees of freedom, rod length, and material density on the eigenfrequencies is investigated. It is found that to ensure sufficient accuracy for engineering practice in determining the three or four lowest natural frequencies, computational models with 8-10 degrees of freedom can be used. It is emphasized that the cross-sectional area of the rod does not affect the characteristics of the frequency spectrum of the mechanical system. The zero value of the lowest natural frequency of an elastic rod with free ends can be explained by the fact that this value corresponds not to the oscillatory but to the translational motion of a mechanical system that is not connected to the base. Forced longitudinal oscillations of an elastic rod, one end of which is clamped at the base and the other end is free, under power and kinematic excitation are considered. The amplitude-frequency characteristics of mechanical systems are constructed on the examples of the dependences of the movement amplitude of one of the material points and the amplitude of the longitudinal force in one of the elastic links of the computational model on the frequency of forced oscillations. Since the dissipation of the mechanical energy of the system during its oscillations is not taken into account, as the frequency of forced oscillations approaches one of the natural frequencies of the system, the movement amplitudes, as well as the amplitudes of internal forces, tend to infinity. The actual values of resonant amplitudes are not of practical interest, since resonant modes of operation are not expected for the vast majority of machine units. The scientific novelty of the results obtained is that the mathematical substantiation of the method of direct discretization of the rod in its application to its longitudinal oscillations, the creation of computational algorithms and the study of the convergence of the results of determining the natural frequencies and amplitudes of forced oscillations can be considered as a development of the computer methodology for the dynamic analysis of mechanical systems with distributed parameters. The practical significance and scope of further research of the results of this work are based on the wide possibilities of practical application of the direct discretization method in the study of dynamic processes in rather complex mechanical systems of such technical objects as drilling rigs, cranes, mine hoisting machines, conveyors, rotary kilns, etc. This is facilitated by the simplicity and computational efficiency of the method in solving problems of dynamics of both linear and nonlinear mechanical systems. The method can be applied in the study of both stationary and transient dynamic processes in machine units.

  • INTERACTION OF THE FLOW OF FLUSHING FLUID WITH THE DRILL PIPES AND THE WALL OF THE WELL

    by Yevhen Kharchenko, Dmytro Butrynskyi

    The steady-state flow of flushing fluid in the annular space of a drill pipe string in the case when the cross section of the channel is an eccentric ring is considered. The drilling mud is considered as a viscoplastic non-Newtonian fluid. The method for calculating the hydraulic parameters of the flushing fluid flow is based on the use of iterative methods of solving nonlinear equations and numerical analysis methods. The method can be used to calculate the hydraulic parameters of the flow in cases of laminar, structural and turbulent modes of fluid motion

  • Open Access

    The modal analisis of a two-link mechanical system of a robot manipulator

    by Yevhen Kharchenko, Volodymyr Vira, Volodymyr Palyukh, Bogdan Vasyliv

    The method of calculation of natural frequencies and forms of oscillations of a two-link mechanical system of a robot manipulator is proposed. Links of the system are considered as straight rods with a step change of cross-sectional parameters. The equations of motion of a mechanical system are...

  • Open Access

    The use of surface acoustic waves to evaluate of the near-surface layers of metal processed shot peening

    by Valentyn Skalsky, Mykhaylo Student, Oleh Mokryy, Waldemar Dudda, Yevhen Kharchenko, Halyna Chumalo, Volodymyr Hvozdetskyi

    The surface layers of low-carbon steel metal subjected to shot peening were studied. The velocity of Rayleigh surface waves of various frequencies in the range of 3-9 MHz by the phase-pulse method using contact piezoelectric transducers measured. The study of the distribution of residual...