Eleonora Viezzer
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Eleonora Viezzer has a total of 1000 co-authors. Here are the top co-authors by number of shared publications:
- Marianela Garcia-Munoz
University of Seville
45 shared publications the ASDEX Upgrade Team
39 shared publications- Thomas Pütterich
Max-Planck-Institut für Plasmaphysik
38 shared publications - Marco Cavedon
Dipartimento di Fisica G. Occhialini, Universita di Milano-Bicocca, Milano, Italy
35 shared publications - Matthias Willensdorfer
Max-Planck-Institut für Plasmaphysik
27 shared publications E. Wolfrum
23 shared publications
Latest Publications
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Implementation of the Thomson scattering system for the SMall Aspect Ratio Tokamak (SMART): Status and synthetic modeling
The SMall Aspect Ratio Tokamak (SMART) is the first spherical tokamak designed to explore the synergy between low aspect ratio geometry and negative triangularity plasmas. To investigate pedestal physics and confinement in this regime, a high-resolution Thomson scattering diagnostic is being implemented in collaboration with the Princeton Plasma Physics Laboratory. This work presents the hardware implementation status and a comprehensive synthetic diagnostic developed to predict the system’s performance. The synthetic model generates realistic scattered spectra using the relativistic Selden–Matoba formalism, incorporating dominant noise sources. An inverse inference module reconstructs electron temperature (Te) and density (ne) profiles. Sensitivity scans utilizing simulations from the TRANSP plasma transport code confirm the diagnostic’s capability to resolve steep edge gradients across SMART’s operational phases, demonstrating sub-centimeter spatial resolution for a dynamic range of 1 eV < Te < 1 keV and densities up to 3 × 1020 m−3.
- 1 November 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (11)
Implementation of the Thomson scattering system for the SMall Aspect Ratio Tokamak (SMART): Status and synthetic modeling
The SMall Aspect Ratio Tokamak (SMART) is the first spherical tokamak designed to explore the synergy between low aspect ratio geometry and negative triangularity plasmas. To investigate pedestal physics and confinement in this regime, a high-resolution Thomson scattering diagnostic is being implemented in collaboration with the Princeton Plasma Physics Laboratory. This work presents the hardware implementation status and a comprehensive synthetic diagnostic developed to predict the system’s performance. The synthetic model generates realistic scattered spectra using the relativistic Selden–Matoba formalism, incorporating dominant noise sources. An inverse inference module reconstructs electron temperature (Te) and density (ne) profiles. Sensitivity scans utilizing simulations from the TRANSP plasma transport code confirm the diagnostic’s capability to resolve steep edge gradients across SMART’s operational phases, demonstrating sub-centimeter spatial resolution for a dynamic range of 1 eV < Te < 1 keV and densities up to 3 × 1020 m−3.
- Open Access
- 2 September 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (10) , 106024
The physics of ballooning-limited ELM-free regimes in EUROfusion tokamaks
The development of operational scenarios without large Type-I ELMs is of utmost importance for the stable operation and longevity of future tokamaks. The EUROfusion tokamak exploitation program has therefore made the understanding of ELM-free regimes a major topic of exploration across all its contributing devices (ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program to investigate a range of Type-I ELM-free regimes has been developed covering the enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT), quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs (SE), I-mode, and X-point radiator (XPR) regimes. This contribution focuses on the development and understanding of the NT and QCE regimes on ASDEX Upgrade, JET, and TCV. The importance of transport via ballooning modes in both regimes is highlighted, as well as the progress in developing access models based on ideal-MHD. In the case of the QCE, this can also be expressed as a minimum separatrix density, which corresponds well to experimentally measured separatrix densities. Particular focus is paid to the performance of the QCE in terms of the achieved pedestal top values, which, when appropriately normalised, do not differ significantly from ELMy H-mode plasmas. This, combined with the predicted minimum separatrix density for the 15 MA ITER baseline plasma, highlight the relevance of the QCE as a potential operational scenario for both ITER and future reactors.
- 2 September 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (10) , 106024
Open AccessThe physics of ballooning-limited ELM-free regimes in EUROfusion tokamaks
The development of operational scenarios without large Type-I ELMs is of utmost importance for the stable operation and longevity of future tokamaks. The EUROfusion tokamak exploitation program has therefore made the understanding of ELM-free regimes a major topic of exploration across all its contributing devices (ASDEX Upgrade, JET, MAST-Upgrade, TCV, and WEST). An integrated program to investigate a range of Type-I ELM-free regimes has been developed covering the enhanced D-alpha (EDA), magnetic perturbations (MP), negative triangularity (NT), quasi-continuous exhaust (QCE), quiescent H-mode (QH), the baseline small ELMs (SE), I-mode, and X-point radiator (XPR) regimes. This contribution focuses on the development and understanding of the NT and QCE regimes on ASDEX Upgrade, JET, and TCV. The importance of transport via ballooning modes in both regimes is highlighted, as well as the progress in developing access models based on ideal-MHD. In the case of the QCE, this can also be expressed as a minimum separatrix density, which corresponds well to experimentally measured separatrix densities. Particular focus is paid to the performance of the QCE in terms of the achieved pedestal top values, which, when appropriately normalised, do not differ significantly from ELMy H-mode plasmas. This, combined with the predicted minimum separatrix density for the 15 MA ITER baseline plasma, highlight the relevance of the QCE as a potential operational scenario for both ITER and future reactors.
- Open Access
- 1 July 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (7) , 076043
Dimensional isotope scaling of heat and particle transport between JET deuterium and tritium L-mode plasmas
The dimensionally matched deuterium–tritium pulse pair under JET L-mode conditions showed 13%–16% improvement in the energy confinement time in favour of the tritium pulse. This favourable isotope scaling can be seen clearly in the effective diffusion coefficients throughout the radius. The isotope scaling originates dominantly from the electron heat transport channel and from the edge part of the plasma. The phase and amplitude profiles in response to the gas puff modulation robustly show that there is no room for a large isotope scaling in the particle transport channel in the core plasma at ρ tor ⩽ 0.95 . This can also be seen in the derived particle transport coefficients between the deuterium and tritium pulses. EDGE2D-EIRENE simulations found that the radial ionisation profiles are very similar between the dimensionally matched deuterium and tritium identity pulses. A similar deviation from the gyro-Bohm scaling, i.e. strong isotope scaling favouring tritium in heat transport was found with gyrokinetic simulations in the edge at ρ tor = 0.95 under the JET L-mode conditions. The strong edge isotope scaling favouring tritium is consistent with the experimental observation. This edge isotope effect ρ tor = 0.95 in the GENE simulations is also much larger than found in the core plasma ρ tor = 0.6 when comparing similarly deuterium and tritium simulation results. Both the experimental results and the GENE simulations suggest that the isotope mass scaling is a nonlinear function of the isotope mass itself, being significantly stronger between deuterium and tritium than between hydrogen and deuterium, at least in JET L-mode conditions.
- 1 July 2026
- Published by IOP Publishing in Nuclear Fusion
- Vol. 66 (7) , 076043
Open AccessDimensional isotope scaling of heat and particle transport between JET deuterium and tritium L-mode plasmas
The dimensionally matched deuterium–tritium pulse pair under JET L-mode conditions showed 13%–16% improvement in the energy confinement time in favour of the tritium pulse. This favourable isotope scaling can be seen clearly in the effective diffusion coefficients throughout the radius. The isotope scaling originates dominantly from the electron heat transport channel and from the edge part of the plasma. The phase and amplitude profiles in response to the gas puff modulation robustly show that there is no room for a large isotope scaling in the particle transport channel in the core plasma at ρ tor ⩽ 0.95 . This can also be seen in the derived particle transport coefficients between the deuterium and tritium pulses. EDGE2D-EIRENE simulations found that the radial ionisation profiles are very similar between the dimensionally matched deuterium and tritium identity pulses. A similar deviation from the gyro-Bohm scaling, i.e. strong isotope scaling favouring tritium in heat transport was found with gyrokinetic simulations in the edge at ρ tor = 0.95 under the JET L-mode conditions. The strong edge isotope scaling favouring tritium is consistent with the experimental observation. This edge isotope effect ρ tor = 0.95 in the GENE simulations is also much larger than found in the core plasma ρ tor = 0.6 when comparing similarly deuterium and tritium simulation results. Both the experimental results and the GENE simulations suggest that the isotope mass scaling is a nonlinear function of the isotope mass itself, being significantly stronger between deuterium and tritium than between hydrogen and deuterium, at least in JET L-mode conditions.
- Open Access
- 28 May 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (6) , 065004
On the impact of isotope mass on the stored core thermal energy in JET H-modes
Understanding how the stored thermal energy scales with the main ion isotope, or mixtures of isotopes, in a tokamak is a key question for predicting the performance of future deuterium–tritium operations in ITER and fusion power plants. Although this remains an active area of research, a complete understanding has yet to be achieved. In this study, three JET H-mode discharges with matched engineering parameters are analysed to provide further experimental and analytical input into the investigation of mass scaling of the plasma turbulent transport. The discharges comprise one almost pure hydrogen, one mixed hydrogen–deuterium and one almost pure deuterium plasma. The analysis employs both linear gyrokinetic simulations and an integrated modelling framework. Particular attention is given to three mechanisms through which the mass of the main ion species is expected to influence the core thermal stored energy: (i) the boundary conditions set by the H-mode pedestal, especially in relation to stiff behaviour of temperature and density profiles; (ii) E × B shearing arising from neutral beam injection driven rotation; and (iii) the contribution of electron temperature gradient-modes to plasma transport. The results presented indicate that the pedestal and E × B shearing was key in explaining the increased thermal stored energy in the core in the analysed discharges.
- 28 May 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (6) , 065004
Open AccessOn the impact of isotope mass on the stored core thermal energy in JET H-modes
Understanding how the stored thermal energy scales with the main ion isotope, or mixtures of isotopes, in a tokamak is a key question for predicting the performance of future deuterium–tritium operations in ITER and fusion power plants. Although this remains an active area of research, a complete understanding has yet to be achieved. In this study, three JET H-mode discharges with matched engineering parameters are analysed to provide further experimental and analytical input into the investigation of mass scaling of the plasma turbulent transport. The discharges comprise one almost pure hydrogen, one mixed hydrogen–deuterium and one almost pure deuterium plasma. The analysis employs both linear gyrokinetic simulations and an integrated modelling framework. Particular attention is given to three mechanisms through which the mass of the main ion species is expected to influence the core thermal stored energy: (i) the boundary conditions set by the H-mode pedestal, especially in relation to stiff behaviour of temperature and density profiles; (ii) E × B shearing arising from neutral beam injection driven rotation; and (iii) the contribution of electron temperature gradient-modes to plasma transport. The results presented indicate that the pedestal and E × B shearing was key in explaining the increased thermal stored energy in the core in the analysed discharges.
- Open Access
- 1 May 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (5)
Hybrid kinetic-MHD simulations of ELMs with fast-ion kinetic effects in the ASDEX Upgrade tokamak
Hybrid kinetic-magnetohydrodynamic (MHD) simulations of edge-localized modes (ELMs) in the ASDEX Upgrade tokamak with the initial value code MEGA are presented in this manuscript and show that, when the fast-ion pressure becomes comparable to the MHD drive, the resulting imbalance between fast-ion and MHD forces increases the mode frequency, reaching values consistent with those observed experimentally in ELM crashes in the presence of fast-ions. First, we provide a detailed description of the numerical setup of MEGA to calculate plasma dynamics at the edge. Subsequently, the MHD module of MEGA is used to simulate the ELM crash without fast-ions, observing the plasma filaments that are ejected from the plasma region, with the consequence of the flattening of the driving sources. Next, systematic scans of the fast-ion parameter space are performed to understand fast-ion effects on ELMs. For core-localized fast-ion distributions, the ELM is unaltered and, after the ELM crash, an energetic particle mode is excited. In the presence of fast-ions at the plasma edge, the ELM crash is characterized by modes that become radially broader and with higher frequencies for increasing fast-ion birth energy.
- 1 May 2026
- Published by AIP Publishing in Physics of Plasmas
- Vol. 33 (5)
Open AccessHybrid kinetic-MHD simulations of ELMs with fast-ion kinetic effects in the ASDEX Upgrade tokamak
Hybrid kinetic-magnetohydrodynamic (MHD) simulations of edge-localized modes (ELMs) in the ASDEX Upgrade tokamak with the initial value code MEGA are presented in this manuscript and show that, when the fast-ion pressure becomes comparable to the MHD drive, the resulting imbalance between fast-ion and MHD forces increases the mode frequency, reaching values consistent with those observed experimentally in ELM crashes in the presence of fast-ions. First, we provide a detailed description of the numerical setup of MEGA to calculate plasma dynamics at the edge. Subsequently, the MHD module of MEGA is used to simulate the ELM crash without fast-ions, observing the plasma filaments that are ejected from the plasma region, with the consequence of the flattening of the driving sources. Next, systematic scans of the fast-ion parameter space are performed to understand fast-ion effects on ELMs. For core-localized fast-ion distributions, the ELM is unaltered and, after the ELM crash, an energetic particle mode is excited. In the presence of fast-ions at the plasma edge, the ELM crash is characterized by modes that become radially broader and with higher frequencies for increasing fast-ion birth energy.
- Open Access
- 30 April 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (5) , 055025
Core impurity flow measurements with Coherence Imaging Charge Exchange Recombination Spectroscopy (CICERS) in Wendelstein 7-X
The Coherence Imaging Charge Exchange Recombination Spectroscopy (CICERS) diagnostic employs the coherence imaging spectroscopy technique to obtain two-dimensional maps of physical quantities derived from charge-exchange radiation in the core region of Wendelstein 7-X plasmas. This work investigates the diagnostic ability to resolve core carbon impurity flow ($v_Z$) measurements. The workflow for the diagnostic calibration is addressed and uncertainty estimates are determined from a diagnostic synthetic model. The first 2D core impurity flow measurements with CICERS are presented. Incorporating a geometrical model that accounts for Pfirsch-Schlüter return flows allows for the development of a bayesian inversion routine to infer radial electric field ($E_r$) and carbon parallel flow ($v_{||}$) profiles from the diagnostic toroidal view. The resulting profiles are compared with neoclassical predictions and experimental measurements from standard CXRS and Doppler Reflectometry. The overall agreement to data from independent diagnostics demonstrate the validity of the diagnostic measurements.
- 30 April 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (5) , 055025
Open AccessCore impurity flow measurements with Coherence Imaging Charge Exchange Recombination Spectroscopy (CICERS) in Wendelstein 7-X
The Coherence Imaging Charge Exchange Recombination Spectroscopy (CICERS) diagnostic employs the coherence imaging spectroscopy technique to obtain two-dimensional maps of physical quantities derived from charge-exchange radiation in the core region of Wendelstein 7-X plasmas. This work investigates the diagnostic ability to resolve core carbon impurity flow ($v_Z$) measurements. The workflow for the diagnostic calibration is addressed and uncertainty estimates are determined from a diagnostic synthetic model. The first 2D core impurity flow measurements with CICERS are presented. Incorporating a geometrical model that accounts for Pfirsch-Schlüter return flows allows for the development of a bayesian inversion routine to infer radial electric field ($E_r$) and carbon parallel flow ($v_{||}$) profiles from the diagnostic toroidal view. The resulting profiles are compared with neoclassical predictions and experimental measurements from standard CXRS and Doppler Reflectometry. The overall agreement to data from independent diagnostics demonstrate the validity of the diagnostic measurements.
- Open Access
- 8 April 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (5)
Routes to high-performance operation in Wendelstein 7-X: turbulence suppression with shaping of the density profile.
Steep density gradients generally lead to improved plasma performance in the neoclassically optimized stellarator W7-X. This is evident in the global energy confinement time as well as in the ion temperature and can be explained by a strong reduction of the ion temperature gradient turbulence. Such conditions can experimentally be realized by several methods: injection of cryogenic hydrogen pellets, appropriate combination of neutral beam and electron cyclotron resonance heating and, in some cases, with low power of electron cyclotron resonance heating after preconditioning of the first wall. The duration of the improved phases is determined by the ability to sustain the steep density gradient, by technical limitations of the involved systems and, eventually, by the plasma stability. This paper gives an overview of relevant experimental results and presents example discharges where the improved confinement conditions could be extended to multiple seconds: up to 4 s using neutral beam injection and from 14 to 40 s with steady state pellet injection. In these plasmas the turbulent thermal diffusivity is reduced by a factor of 3 to 4 in a broad radial range, which allows high ion temperatures of up to 3 keV at the densities of about 1.5 • 10 20 m -3 .
- 8 April 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (5)
Open AccessRoutes to high-performance operation in Wendelstein 7-X: turbulence suppression with shaping of the density profile.
Steep density gradients generally lead to improved plasma performance in the neoclassically optimized stellarator W7-X. This is evident in the global energy confinement time as well as in the ion temperature and can be explained by a strong reduction of the ion temperature gradient turbulence. Such conditions can experimentally be realized by several methods: injection of cryogenic hydrogen pellets, appropriate combination of neutral beam and electron cyclotron resonance heating and, in some cases, with low power of electron cyclotron resonance heating after preconditioning of the first wall. The duration of the improved phases is determined by the ability to sustain the steep density gradient, by technical limitations of the involved systems and, eventually, by the plasma stability. This paper gives an overview of relevant experimental results and presents example discharges where the improved confinement conditions could be extended to multiple seconds: up to 4 s using neutral beam injection and from 14 to 40 s with steady state pellet injection. In these plasmas the turbulent thermal diffusivity is reduced by a factor of 3 to 4 in a broad radial range, which allows high ion temperatures of up to 3 keV at the densities of about 1.5 • 10 20 m -3 .
- Open Access
- 6 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2659-2664
Commissioning of the Power Supplies and Coils of the SMART Tokamak
The small aspect ratio tokamak (SMART) is a spherical tokamak (ST) that offers unique capabilities for studying the potential of negative triangularity. It has been designed, constructed, and is currently being operated by the Plasma Science Fusion Technology (PSFT) Laboratory at the University of Seville. SMART has a total of 21 coils, organized into seven independent circuits and driven by five modular power supplies (PS). The PS operation relies on switching converter technology based on IGBT and supercapacitors (SCs). The PS delivers predefined current waveforms to the copper coil system consisting of the central solenoid (CS), 12 toroidal field (TF) coils, three series pairs of poloidal field (PF) coils, and two independent PF coils. This study details the commissioning and validation of the PS toroidal and solenoid coils, as well as the assembly of coils in SMART. The maximum rated current and slope were measured, along with the series impedance of the coils, the output current ripple, and the noise levels. The internal parameters of the SCs were measured, and optimized current profiles were proposed to enhance overall performance. A comparison has been made between the theoretical values and the experimental results, providing insight into the performance of the PS and areas for improvement.
- 6 March 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Plasma Science
- Vol. 54 (6) , 2659-2664
Open AccessCommissioning of the Power Supplies and Coils of the SMART Tokamak
The small aspect ratio tokamak (SMART) is a spherical tokamak (ST) that offers unique capabilities for studying the potential of negative triangularity. It has been designed, constructed, and is currently being operated by the Plasma Science Fusion Technology (PSFT) Laboratory at the University of Seville. SMART has a total of 21 coils, organized into seven independent circuits and driven by five modular power supplies (PS). The PS operation relies on switching converter technology based on IGBT and supercapacitors (SCs). The PS delivers predefined current waveforms to the copper coil system consisting of the central solenoid (CS), 12 toroidal field (TF) coils, three series pairs of poloidal field (PF) coils, and two independent PF coils. This study details the commissioning and validation of the PS toroidal and solenoid coils, as well as the assembly of coils in SMART. The maximum rated current and slope were measured, along with the series impedance of the coils, the output current ripple, and the noise levels. The internal parameters of the SCs were measured, and optimized current profiles were proposed to enhance overall performance. A comparison has been made between the theoretical values and the experimental results, providing insight into the performance of the PS and areas for improvement.
- 1 March 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (3)
A MINi Powder INjector (MINPIN) for the SMART tokamak
This article presents the design and performance characterization of a MINi Powder INjector (MINPIN) developed for boron wall conditioning (boronization) in the SMall Aspect Ratio Tokamak (SMART) at the University of Seville, Spain. SMART studies positive and negative triangularity plasmas within the low aspect ratio range of 1.4 < R/a < 3, with a major radius (R) of 0.40–0.60 m and a minor radius (a) of 0.20–0.33 m. MINPIN, in design, will gravitationally deliver boron (B) powder into the plasma, which ablates and transports the injected material. Mounted on the top of the vessel, the MINPIN will drop controlled amounts of powder using a piezoelectric blade driven by a signal generator that vibrates at a set frequency. The B will then be deposited in a layer on SMART’s stainless steel vacuum vessel walls, and this boronization process reduces the influx of intrinsic wall impurities, such as oxygen, carbon, nitrogen, and iron, which radiate power and cool the plasma. In the laboratory, we calibrated the drop rate for 1–10 mg/s, which will enable controlled boronization coating while achieving efficient powder ablation. We propose MINPIN’s operational scenarios based on the calibrated drop rate and estimated drop duration, assuming the distance from MINPIN to SMART’s plasmas.
- 1 March 2026
- Published by AIP Publishing in Review of Scientific Instruments
- Vol. 97 (3)
A MINi Powder INjector (MINPIN) for the SMART tokamak
This article presents the design and performance characterization of a MINi Powder INjector (MINPIN) developed for boron wall conditioning (boronization) in the SMall Aspect Ratio Tokamak (SMART) at the University of Seville, Spain. SMART studies positive and negative triangularity plasmas within the low aspect ratio range of 1.4 < R/a < 3, with a major radius (R) of 0.40–0.60 m and a minor radius (a) of 0.20–0.33 m. MINPIN, in design, will gravitationally deliver boron (B) powder into the plasma, which ablates and transports the injected material. Mounted on the top of the vessel, the MINPIN will drop controlled amounts of powder using a piezoelectric blade driven by a signal generator that vibrates at a set frequency. The B will then be deposited in a layer on SMART’s stainless steel vacuum vessel walls, and this boronization process reduces the influx of intrinsic wall impurities, such as oxygen, carbon, nitrogen, and iron, which radiate power and cool the plasma. In the laboratory, we calibrated the drop rate for 1–10 mg/s, which will enable controlled boronization coating while achieving efficient powder ablation. We propose MINPIN’s operational scenarios based on the calibrated drop rate and estimated drop duration, assuming the distance from MINPIN to SMART’s plasmas.
- Open Access
- 1 March 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (3) , 035011
Physics of the low momentum diffusivity regime in tokamaks and its experimental applicability
Strong E × B plasma flow shear is beneficial for reducing turbulent transport. However, traditional methods of driving flow shear do not scale well to large devices such as future fusion power plants. In this paper, we use a large number of nonlinear gyrokinetic simulations to study a novel approach to increase flow shear: decreasing the momentum diffusivity to make the plasma ‘easier to push’. We first use an idealized circular geometry and find that one can obtain low momentum diffusivity (LMD) at tight aspect ratio, low safety factor, high magnetic shear and low temperature gradient. This is the so-called LMD regime. To drive intrinsic momentum flux, we then tilt the flux surface, making it up–down asymmetric. In the LMD regime, this intrinsic momentum flux drives strong flow shear that can significantly reduce the heat flux and increase the critical temperature gradient. We also consider the actual experimental geometry of the Mega Ampere Spherical Tokamak (MAST) to illustrate that this strategy can be practical and create experimentally significant flow shear. Lastly, a preliminary prediction for the SMall Aspect Ratio Tokamak (SMART) is made.
- 1 March 2026
- Published by IOP Publishing in Plasma Physics and Controlled Fusion
- Vol. 68 (3) , 035011
Open AccessPhysics of the low momentum diffusivity regime in tokamaks and its experimental applicability
Strong E × B plasma flow shear is beneficial for reducing turbulent transport. However, traditional methods of driving flow shear do not scale well to large devices such as future fusion power plants. In this paper, we use a large number of nonlinear gyrokinetic simulations to study a novel approach to increase flow shear: decreasing the momentum diffusivity to make the plasma ‘easier to push’. We first use an idealized circular geometry and find that one can obtain low momentum diffusivity (LMD) at tight aspect ratio, low safety factor, high magnetic shear and low temperature gradient. This is the so-called LMD regime. To drive intrinsic momentum flux, we then tilt the flux surface, making it up–down asymmetric. In the LMD regime, this intrinsic momentum flux drives strong flow shear that can significantly reduce the heat flux and increase the critical temperature gradient. We also consider the actual experimental geometry of the Mega Ampere Spherical Tokamak (MAST) to illustrate that this strategy can be practical and create experimentally significant flow shear. Lastly, a preliminary prediction for the SMall Aspect Ratio Tokamak (SMART) is made.