Hrishikesh Jayakumar
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hrishikesh Jayakumar has a total of 12 co-authors. Here are the top co-authors by number of shared publications:
- Arnab Raha
Intel Corporation
10 shared publications Vijay Raghunathan
Purdue University, West Lafayette, IN
9 shared publicationsWoo Suk Lee
Purdue University, West Lafayette, IN
3 shared publications- Vijay Raghunathan
School of Electrical and Computer Engineering, Purdue University, West Lafayette, IN, USA
2 shared publications Anand Raghunathan
School of Electrical and Computer Engineering, Purdue University
1 shared publicationDebabrata Mohapatra
School of Electrical and Computer Engineering, Purdue University
1 shared publication
Latest Publications
- Open Access
- 28 April 2017
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Embedded Computing Systems
- Vol. 16 (3) , 1-23
Energy-Aware Memory Mapping for Hybrid FRAM-SRAM MCUs in Intermittently-Powered IoT Devices
Forecasts project that by 2020, there will be around 50 billion devices connected to the Internet of Things (IoT), most of which will operate untethered and unplugged. While environmental energy harvesting is a promising solution to power these IoT edge devices, it introduces new complexities due to the unreliable nature of ambient energy sources. In the presence of an unreliable power supply, frequent checkpointing of the system state becomes imperative, and recent research has proposed the concept of in-situ checkpointing by using ferroelectric RAM (FRAM), an emerging non-volatile memory technology, as unified memory in these systems. Even though an entirely FRAM-based solution provides reliability, it is energy inefficient compared to SRAM due to the higher access latency of FRAM. On the other hand, an entirely SRAM-based solution is highly energy efficient but is unreliable in the face of power loss. This paper advocates an intermediate approach in hybrid FRAM-SRAM microcontrollers that involves judicious memory mapping of program sections to retain the reliability benefits provided by FRAM while performing almost as efficiently as an SRAM-based system. We propose an energy-aware memory mapping technique that maps different program sections to the hybrid FRAM-SRAM microcontroller such that energy consumption is minimized without sacrificing reliability. Our technique consists of eM-map , which performs a one-time characterization to find the optimal memory map for the functions that constitute a program and energy-align , a novel hardware-software technique that aligns the system’s powered-on time intervals to function execution boundaries, which results in further improvements in energy efficiency and performance. Experimental results obtained using the MSP430FR5739 microcontroller demonstrate a significant performance improvement of up to 2x and energy reduction of up to 20% over a state-of-the-art FRAM-based solution. Finally, we present a case study that shows the implementation of our techniques in the context of a real IoT application.
- 28 April 2017
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Embedded Computing Systems
- Vol. 16 (3) , 1-23
Open AccessEnergy-Aware Memory Mapping for Hybrid FRAM-SRAM MCUs in Intermittently-Powered IoT Devices
Forecasts project that by 2020, there will be around 50 billion devices connected to the Internet of Things (IoT), most of which will operate untethered and unplugged. While environmental energy harvesting is a promising solution to power these IoT edge devices, it introduces new complexities due to the unreliable nature of ambient energy sources. In the presence of an unreliable power supply, frequent checkpointing of the system state becomes imperative, and recent research has proposed the concept of in-situ checkpointing by using ferroelectric RAM (FRAM), an emerging non-volatile memory technology, as unified memory in these systems. Even though an entirely FRAM-based solution provides reliability, it is energy inefficient compared to SRAM due to the higher access latency of FRAM. On the other hand, an entirely SRAM-based solution is highly energy efficient but is unreliable in the face of power loss. This paper advocates an intermediate approach in hybrid FRAM-SRAM microcontrollers that involves judicious memory mapping of program sections to retain the reliability benefits provided by FRAM while performing almost as efficiently as an SRAM-based system. We propose an energy-aware memory mapping technique that maps different program sections to the hybrid FRAM-SRAM microcontroller such that energy consumption is minimized without sacrificing reliability. Our technique consists of eM-map , which performs a one-time characterization to find the optimal memory map for the functions that constitute a program and energy-align , a novel hardware-software technique that aligns the system’s powered-on time intervals to function execution boundaries, which results in further improvements in energy efficiency and performance. Experimental results obtained using the MSP430FR5739 microcontroller demonstrate a significant performance improvement of up to 2x and energy reduction of up to 20% over a state-of-the-art FRAM-based solution. Finally, we present a case study that shows the implementation of our techniques in the context of a real IoT application.
- Open Access
- 3 November 2016
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Embedded Computing Systems
- Vol. 16 (1) , 1-25
Sleep-Mode Voltage Scaling
In heavily duty-cycled embedded systems, the energy consumed by the microcontroller in idle mode is often the bottleneck for battery lifetime. Existing solutions address this problem by placing the microcontroller in a low-power (sleep) mode when idle and preserving application state either by retaining the data in situ in Static Random Access Memory (SRAM) or by checkpointing it to F lash . However, both of these approaches have notable drawbacks. In situ data retention requires the SRAM to remain powered in sleep mode, while checkpointing to F lash involves significant energy and time overheads. This article proposes a new ultra-low-power sleep mode for microcontrollers that overcomes the limitations of both of these approaches. Our technique, H ypnos , is based on the key observation that the on-chip SRAM in a microcontroller exhibits 100% data retention even at a much lower supply voltage (as much as 10× lower) than the typical operating voltage of the microcontroller. H ypnos exploits this observation by performing extreme voltage scaling when the microcontroller is in sleep mode. We implement and evaluate H ypnos for the TI MSP430G2452 microcontroller and show that the Microcontroller (MCU) draws only 26nA in the proposed sleep mode, which is 4× lower than a baseline sleep mode that preserves SRAM contents. Further, to reduce the overheads associated with performing the voltage scaling, we propose the use of an energy harvesting source for providing the scaled supply voltage and demonstrate (using a light sensing photodiode) that the current consumption in the proposed sleep mode can be reduced to 1nA, which is 100× lower than the current consumption in the baseline low-power mode. We also show that the decrease in sleep-mode power consumption translates to a reduction in application-level energy consumption by as much as 6.45×. By decreasing the average power consumption to such minuscule levels, H ypnos takes a significant step forward in making perpetual systems a reality through the use of energy harvesting.
- 3 November 2016
- Published by Association for Computing Machinery (ACM) in ACM Transactions on Embedded Computing Systems
- Vol. 16 (1) , 1-25
Open AccessSleep-Mode Voltage Scaling
In heavily duty-cycled embedded systems, the energy consumed by the microcontroller in idle mode is often the bottleneck for battery lifetime. Existing solutions address this problem by placing the microcontroller in a low-power (sleep) mode when idle and preserving application state either by retaining the data in situ in Static Random Access Memory (SRAM) or by checkpointing it to F lash . However, both of these approaches have notable drawbacks. In situ data retention requires the SRAM to remain powered in sleep mode, while checkpointing to F lash involves significant energy and time overheads. This article proposes a new ultra-low-power sleep mode for microcontrollers that overcomes the limitations of both of these approaches. Our technique, H ypnos , is based on the key observation that the on-chip SRAM in a microcontroller exhibits 100% data retention even at a much lower supply voltage (as much as 10× lower) than the typical operating voltage of the microcontroller. H ypnos exploits this observation by performing extreme voltage scaling when the microcontroller is in sleep mode. We implement and evaluate H ypnos for the TI MSP430G2452 microcontroller and show that the Microcontroller (MCU) draws only 26nA in the proposed sleep mode, which is 4× lower than a baseline sleep mode that preserves SRAM contents. Further, to reduce the overheads associated with performing the voltage scaling, we propose the use of an energy harvesting source for providing the scaled supply voltage and demonstrate (using a light sensing photodiode) that the current consumption in the proposed sleep mode can be reduced to 1nA, which is 100× lower than the current consumption in the baseline low-power mode. We also show that the decrease in sleep-mode power consumption translates to a reduction in application-level energy consumption by as much as 6.45×. By decreasing the average power consumption to such minuscule levels, H ypnos takes a significant step forward in making perpetual systems a reality through the use of energy harvesting.
- 1 January 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 264-269
Energy-Aware Memory Mapping for Hybrid FRAM-SRAM MCUs in IoT Edge Devices
Forecasts project that by 2020, there will be around 50 billion devices connected to the Internet of Things (IoT), most of which will operate untethered and unplugged. While environmental energy harvesting is a promising solution to power these IoT edge devices, it introduces new complexities due to the unreliable nature of ambient energy sources. In the presence of an unreliable power supply, frequent check pointing of system state becomes imperative and recent research proposed the concept of in-situ check pointing by employing ferroelectric RAM (FRAM), an emerging non-volatile memory, as unified memory. Even though an entirely FRAM-based solution provides reliability, it is energy-inefficient compared to SRAM due to a higher access latency. On the other hand, an entirely SRAM-based solution is highly energy efficient, but is unreliable in the face of power loss. This paper advocates an intermediate approach in hybrid FRAM-SRAM MCUs that involves judicious memory mapping of program sections to retain the reliability benefits provided by FRAM while performing almost as efficiently as an SRAM-based system. We propose an energy-aware memory mapping technique that maps different sections to the hybrid FRAM-SRAM MCU such that energy consumption is optimized without sacrificing reliability. Our technique consists of eM-map, which performs a one-time characterization to find the optimal memory map for the functions that constitute a program (this makes our solution portable across platforms) and energy-align, a novel HW/SW technique that aligns the system's powered-on time intervals to function execution boundaries, which results in further improvements in energy efficiency and performance. Our experiments using the MSP430FR5739 microcontroller demonstrate a significant performance improvement of up to 2x and energy reduction of up to 20% over a state-of-the-art FRAM-based solution.
- 1 January 2016
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 264-269
Energy-Aware Memory Mapping for Hybrid FRAM-SRAM MCUs in IoT Edge Devices
Forecasts project that by 2020, there will be around 50 billion devices connected to the Internet of Things (IoT), most of which will operate untethered and unplugged. While environmental energy harvesting is a promising solution to power these IoT edge devices, it introduces new complexities due to the unreliable nature of ambient energy sources. In the presence of an unreliable power supply, frequent check pointing of system state becomes imperative and recent research proposed the concept of in-situ check pointing by employing ferroelectric RAM (FRAM), an emerging non-volatile memory, as unified memory. Even though an entirely FRAM-based solution provides reliability, it is energy-inefficient compared to SRAM due to a higher access latency. On the other hand, an entirely SRAM-based solution is highly energy efficient, but is unreliable in the face of power loss. This paper advocates an intermediate approach in hybrid FRAM-SRAM MCUs that involves judicious memory mapping of program sections to retain the reliability benefits provided by FRAM while performing almost as efficiently as an SRAM-based system. We propose an energy-aware memory mapping technique that maps different sections to the hybrid FRAM-SRAM MCU such that energy consumption is optimized without sacrificing reliability. Our technique consists of eM-map, which performs a one-time characterization to find the optimal memory map for the functions that constitute a program (this makes our solution portable across platforms) and energy-align, a novel HW/SW technique that aligns the system's powered-on time intervals to function execution boundaries, which results in further improvements in energy efficiency and performance. Our experiments using the MSP430FR5739 microcontroller demonstrate a significant performance improvement of up to 2x and energy reduction of up to 20% over a state-of-the-art FRAM-based solution.
- 1 October 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 89-98
Quality-aware data allocation in approximate DRAM
Approximate computing is an emerging design paradigm that leverages the inherent error tolerance present in many applications to optimize their power consumption and performance. Due to the forgiving nature of these error-resilient applications, highly precise input data is not always necessary for them to produce outputs of acceptable quality. This makes memory, the place where data is stored, a suitable component for introducing errors or approximations in return for considerable energy savings. Towards this end, this paper proposes, for the first time, a systematic way for constructing a quality-aware approximate DRAM system. Our design is based upon an extensive experimental characterization of memory errors as a function of the DRAM refresh rate. Leveraging the insights gathered from this characterization, we propose four novel strategies for partitioning the DRAM into a number of quality bins based on the frequency, location, and nature of bit errors in each of the physical pages. During allocation, critical data is placed in the highest quality bin containing only accurate pages and approximate data is allocated to bins sorted in descending order of quality. We validate our proposed scheme on several error-resilient applications implemented using an Altera Stratix IV GX FPGA based Terasic TR4-230 development board containing a 1GB DDR3 DRAM module. Experimental results demonstrate a significant improvement in the energy-quality trade-off compared to previous work and show a reduction in DRAM refresh power of up to 73% with minimal loss in output quality.
- 1 October 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 89-98
Quality-aware data allocation in approximate DRAM
Approximate computing is an emerging design paradigm that leverages the inherent error tolerance present in many applications to optimize their power consumption and performance. Due to the forgiving nature of these error-resilient applications, highly precise input data is not always necessary for them to produce outputs of acceptable quality. This makes memory, the place where data is stored, a suitable component for introducing errors or approximations in return for considerable energy savings. Towards this end, this paper proposes, for the first time, a systematic way for constructing a quality-aware approximate DRAM system. Our design is based upon an extensive experimental characterization of memory errors as a function of the DRAM refresh rate. Leveraging the insights gathered from this characterization, we propose four novel strategies for partitioning the DRAM into a number of quality bins based on the frequency, location, and nature of bit errors in each of the physical pages. During allocation, critical data is placed in the highest quality bin containing only accurate pages and approximate data is allocated to bins sorted in descending order of quality. We validate our proposed scheme on several error-resilient applications implemented using an Altera Stratix IV GX FPGA based Terasic TR4-230 development board containing a 1GB DDR3 DRAM module. Experimental results demonstrate a significant improvement in the energy-quality trade-off compared to previous work and show a reduction in DRAM refresh power of up to 73% with minimal loss in output quality.
- Open Access
- 3 August 2015
- Published by Association for Computing Machinery (ACM) in ACM Journal on Emerging Technologies in Computing Systems
- Vol. 12 (1) , 1-19
Q uick R ecall
Transiently Powered Computers (TPCs) are a new class of batteryless embedded systems that depend solely on energy harvested from external sources for performing computations. Enabling long-running computations on TPCs is a major challenge due to the highly intermittent nature of the power supply (often bursts of < 100ms), resulting in frequent system reboots. Prior work seeks to address this issue by frequently checkpointing system state in flash memory, preserving it across power cycles. However, this involves a substantial overhead due to the high erase/write times of flash memory. This article proposes the use of Ferroelectric RAM (FRAM), an emerging nonvolatile memory technology that combines the benefits of SRAM and flash, to seamlessly enable long-running computations in TPCs. We propose a lightweight, in-situ checkpointing technique for TPCs using FRAM that consumes only 30 nJ while decreasing the time taken for saving and restoring a checkpoint to only 21.06μ s , which is over two orders of magnitude lower than the corresponding overhead using flash. We have implemented and evaluated our technique, Q uick R ecall , using the TI MSP430FR5739 FRAM-enabled microcontroller. Experimental results show that our highly-efficient checkpointing translate to significant speedup (1.25x - 8.4x) in program execution time and reduction (∼3x) in application-level energy consumption.
- 3 August 2015
- Published by Association for Computing Machinery (ACM) in ACM Journal on Emerging Technologies in Computing Systems
- Vol. 12 (1) , 1-19
Open AccessQ uick R ecall
Transiently Powered Computers (TPCs) are a new class of batteryless embedded systems that depend solely on energy harvested from external sources for performing computations. Enabling long-running computations on TPCs is a major challenge due to the highly intermittent nature of the power supply (often bursts of < 100ms), resulting in frequent system reboots. Prior work seeks to address this issue by frequently checkpointing system state in flash memory, preserving it across power cycles. However, this involves a substantial overhead due to the high erase/write times of flash memory. This article proposes the use of Ferroelectric RAM (FRAM), an emerging nonvolatile memory technology that combines the benefits of SRAM and flash, to seamlessly enable long-running computations in TPCs. We propose a lightweight, in-situ checkpointing technique for TPCs using FRAM that consumes only 30 nJ while decreasing the time taken for saving and restoring a checkpoint to only 21.06μ s , which is over two orders of magnitude lower than the corresponding overhead using flash. We have implemented and evaluated our technique, Q uick R ecall , using the TI MSP430FR5739 FRAM-enabled microcontroller. Experimental results show that our highly-efficient checkpointing translate to significant speedup (1.25x - 8.4x) in program execution time and reduction (∼3x) in application-level energy consumption.
- 13 May 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 24 (3) , 846-857
Input-Based Dynamic Reconfiguration of Approximate Arithmetic Units for Video Encoding
The field of approximate computing has received significant attention from the research community in the past few years, especially in the context of various signal processing applications. Image and video compression algorithms, such as JPEG, MPEG, and so on, are particularly attractive candidates for approximate computing, since they are tolerant of computing imprecision due to human imperceptibility, which can be exploited to realize highly power-efficient implementations of these algorithms. However, existing approximate architectures typically fix the level of hardware approximation statically and are not adaptive to input data. For example, if a fixed approximate hardware configuration is used for an MPEG encoder (i.e., a fixed level of approximation), the output quality varies greatly for different input videos. This paper addresses this issue by proposing a reconfigurable approximate architecture for MPEG encoders that optimizes power consumption with the goal of maintaining a particular Peak Signal-to-Noise Ratio (PSNR) threshold for any video. Toward this end, we design reconfigurable adder/subtractor blocks (RABs), which have the ability to modulate their degree of approximation, and subsequently integrate these blocks in the motion estimation and discrete cosine transform modules of the MPEG encoder. We propose two heuristics for automatically tuning the approximation degree of the RABs in these two modules during runtime based on the characteristics of each individual video. Experimental results show that our approach of dynamically adjusting the degree of hardware approximation based on the input video respects the given quality bound (PSNR degradation of 1%-10%) across different videos while achieving a power saving up to 38% over a conventional nonapproximated MPEG encoder architecture. Note that although the proposed reconfigurable approximate architecture is presented for the specific case of an MPEG encoder, it can be easily extended to other DSP applications.
- 13 May 2015
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Very Large Scale Integration (VLSI) Systems
- Vol. 24 (3) , 846-857
Input-Based Dynamic Reconfiguration of Approximate Arithmetic Units for Video Encoding
The field of approximate computing has received significant attention from the research community in the past few years, especially in the context of various signal processing applications. Image and video compression algorithms, such as JPEG, MPEG, and so on, are particularly attractive candidates for approximate computing, since they are tolerant of computing imprecision due to human imperceptibility, which can be exploited to realize highly power-efficient implementations of these algorithms. However, existing approximate architectures typically fix the level of hardware approximation statically and are not adaptive to input data. For example, if a fixed approximate hardware configuration is used for an MPEG encoder (i.e., a fixed level of approximation), the output quality varies greatly for different input videos. This paper addresses this issue by proposing a reconfigurable approximate architecture for MPEG encoders that optimizes power consumption with the goal of maintaining a particular Peak Signal-to-Noise Ratio (PSNR) threshold for any video. Toward this end, we design reconfigurable adder/subtractor blocks (RABs), which have the ability to modulate their degree of approximation, and subsequently integrate these blocks in the motion estimation and discrete cosine transform modules of the MPEG encoder. We propose two heuristics for automatically tuning the approximation degree of the RABs in these two modules during runtime based on the characteristics of each individual video. Experimental results show that our approach of dynamically adjusting the degree of hardware approximation based on the input video respects the given quality bound (PSNR degradation of 1%-10%) across different videos while achieving a power saving up to 38% over a conventional nonapproximated MPEG encoder architecture. Note that although the proposed reconfigurable approximate architecture is presented for the specific case of an MPEG encoder, it can be easily extended to other DSP applications.
- 1 November 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 1-10
When they are not listening: Harvesting power from idle sensors in embedded systems
Ambient energy harvesting is a well-known technique in wireless sensing systems. To minimize energy consumption, such systems are typically designed to be heavily duty-cycled with long idle times and are characteristically lightweight in computation. Often, these systems contain a dedicated energy harvesting transducer that is independent of the sensing sub-system. As a result, any output energy from the sensor ends up being unused (and hence, lost) when the system is in idle state. This work proposes a novel system architecture and corresponding hardware platform, Senergy, in which the energy harvested from a sensor during idle time is utilized to power the system. Senergy is based on an ultra-low power charge pump circuit that boosts input voltages as low as 330mV. We successfully demonstrate our proposed architecture with an RF-capable (2.4GHz ISM band) sensing platform utilizing a photovoltaic sensor as the sole energy source. We evaluate our approach on two applications, namely adaptive transmission of sensor data and providing an uninterrupted power supply to an on-board real time clock.
- 1 November 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- Vol. 1, 1-10
When they are not listening: Harvesting power from idle sensors in embedded systems
Ambient energy harvesting is a well-known technique in wireless sensing systems. To minimize energy consumption, such systems are typically designed to be heavily duty-cycled with long idle times and are characteristically lightweight in computation. Often, these systems contain a dedicated energy harvesting transducer that is independent of the sensing sub-system. As a result, any output energy from the sensor ends up being unused (and hence, lost) when the system is in idle state. This work proposes a novel system architecture and corresponding hardware platform, Senergy, in which the energy harvested from a sensor during idle time is utilized to power the system. Senergy is based on an ultra-low power charge pump circuit that boosts input voltages as low as 330mV. We successfully demonstrate our proposed architecture with an RF-capable (2.4GHz ISM band) sensing platform utilizing a photovoltaic sensor as the sole energy source. We evaluate our approach on two applications, namely adaptive transmission of sensor data and providing an uninterrupted power supply to an on-board real time clock.
- Open Access
- 11 August 2014
- Published by Association for Computing Machinery (ACM)
- p. 375-380
Powering the internet of things
Various industry forecasts project that, by 2020, there will be around 50 billion devices connected to the Internet of Things (IoT), helping to engineer new solutions to societal-scale problems such as healthcare, energy conservation, transportation, etc. Most of these devices will be wireless due to the expense, inconvenience, or in some cases, the sheer infeasibility of wiring them. Further, many of them will have stringent size constraints. With no cord for power and limited space for a battery, powering these devices (to achieve several months to possibly years of unattended operation) becomes a daunting challenge. This paper highlights some promising directions for addressing this challenge, focusing on three main building blocks: (a) the design of ultra-low power hardware platforms that integrate computing, sensing, storage, and wireless connectivity in a tiny form factor, (b) the development of intelligent system-level power management techniques, and (c) the use of environmental energy harvesting to make IoT devices self-powered, thus decreasing -- in some cases, even eliminating -- their dependence on batteries. We discuss these building blocks in detail and illustrate case-studies of systems that use them judiciously, including the QUBE wireless embedded platform, which exploits the characteristics of emerging non-volatile memory technologies to seamlessly and efficiently enable long-running computations in systems that experience frequent power loss (i.e., intermittently powered systems).
- 11 August 2014
- Published by Association for Computing Machinery (ACM)
- p. 375-380
Open AccessPowering the internet of things
Various industry forecasts project that, by 2020, there will be around 50 billion devices connected to the Internet of Things (IoT), helping to engineer new solutions to societal-scale problems such as healthcare, energy conservation, transportation, etc. Most of these devices will be wireless due to the expense, inconvenience, or in some cases, the sheer infeasibility of wiring them. Further, many of them will have stringent size constraints. With no cord for power and limited space for a battery, powering these devices (to achieve several months to possibly years of unattended operation) becomes a daunting challenge. This paper highlights some promising directions for addressing this challenge, focusing on three main building blocks: (a) the design of ultra-low power hardware platforms that integrate computing, sensing, storage, and wireless connectivity in a tiny form factor, (b) the development of intelligent system-level power management techniques, and (c) the use of environmental energy harvesting to make IoT devices self-powered, thus decreasing -- in some cases, even eliminating -- their dependence on batteries. We discuss these building blocks in detail and illustrate case-studies of systems that use them judiciously, including the QUBE wireless embedded platform, which exploits the characteristics of emerging non-volatile memory technologies to seamlessly and efficiently enable long-running computations in systems that experience frequent power loss (i.e., intermittently powered systems).
- Top Cited Papers
- 1 January 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10639667,p. 330-335
QUICKRECALL: A Low Overhead HW/SW Approach for Enabling Computations across Power Cycles in Transiently Powered Computers
Transiently Powered Computers (TPCs) are a new class of batteryless embedded systems that depend solely on energy harvested from external sources for performing computations. Enabling long-running computations on TPCs is a major challenge due to the highly intermittent nature of the power supply (often bursts of <; 100ms), resulting in frequent system reboots. Prior work seeks to address this issue by frequently checkpointing system state in flash memory, preserving it across power cycles. However, this involves a substantial overhead due to the high erase/write times of flash memory. This paper proposes the use of FRAM, an emerging non-volatile memory technology that combines the benefits of SRAM and flash, to seamlessly enable long-running computations in TPCs. We propose a lightweight, in-situ checkpointing technique for TPCs using FRAM that decreases the time taken for saving and restoring a checkpoint to only 12.6μs, which is over two orders of magnitude lower than the corresponding overhead using flash. We have implemented and evaluated our technique, QUICKRECALL, using the TI MSP430FR5739 FRAM-enabled microcontroller. Experimental results show that our highly-efficient checkpointing translates to a significant speedup (1.4x - 4.5x) in program execution time.
- 1 January 2014
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- No. 10639667,p. 330-335
Top Cited PapersQUICKRECALL: A Low Overhead HW/SW Approach for Enabling Computations across Power Cycles in Transiently Powered Computers
Transiently Powered Computers (TPCs) are a new class of batteryless embedded systems that depend solely on energy harvested from external sources for performing computations. Enabling long-running computations on TPCs is a major challenge due to the highly intermittent nature of the power supply (often bursts of <; 100ms), resulting in frequent system reboots. Prior work seeks to address this issue by frequently checkpointing system state in flash memory, preserving it across power cycles. However, this involves a substantial overhead due to the high erase/write times of flash memory. This paper proposes the use of FRAM, an emerging non-volatile memory technology that combines the benefits of SRAM and flash, to seamlessly enable long-running computations in TPCs. We propose a lightweight, in-situ checkpointing technique for TPCs using FRAM that decreases the time taken for saving and restoring a checkpoint to only 12.6μs, which is over two orders of magnitude lower than the corresponding overhead using flash. We have implemented and evaluated our technique, QUICKRECALL, using the TI MSP430FR5739 FRAM-enabled microcontroller. Experimental results show that our highly-efficient checkpointing translates to a significant speedup (1.4x - 4.5x) in program execution time.