SESaad A. El-Sayed

Saad A. El-Sayed

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Saad A. El-Sayed has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Chemical products yielded from different pyrolysis processes of rice waste residues: a comprehensive review

    by Saad A. El-Sayed

    Researchers are conducting extensive research on renewable energy sources to offset the decline in petroleum-based products. It is becoming more and more important to use biomass as a source of energy and renewable fuels. The most promising method for converting biomass into alternative energy in the forms of biochar, biooil, combustible gases, and other important compounds is pyrolysis. To produce such important alternative fuels in an efficient and cost-effective manner, biomass is thermochemically broken down without the presence of oxygen. The vast amount of biomass that comprises rice waste, including husk, bran, and straw, makes it the perfect feedstock for biomass conversion. First, rice waste is synthesized and used for the production of bio-char and biofuels, which are alternatives to fossil fuels. The conversion of rice waste into platform chemicals is then emphasized as a way to use the current industrial facilities to produce sustainable chemical production using renewable carbon feedstocks. Additional uses for rice waste bio-char include the production of bio-diesel, bio-methane, biohydrogen, sugars (xylose and glucose), furan derviatives, organic acids, and aromatic hydrocarbons (benzene, toluene, etc.). This review examines the outcomes of rice pyrolysis, equipment and operating parameters, the composition of bio-oil, the chemical composition of rice wastes, and their heating value from the perspective of research on biomass pyrolysis. The review demonstrates that the primary operating parameters that impact the quantity and quality of yields are the pyrolysis temperature, inert gas sweeping rate, residence durations, heating rate, particle size, catalysts, pre-washing, and equipment employed, among others. An empirical formula for HHV based on the elemental analysis of rice residue with reasonably high accuracy is presented. Also, comparisons between the different yield types from different pyrolyzed reactors are introduced and discussed. Future research on rice waste valorization for the sustainable production of chemicals and fuels will be guided by the issues and opportunities that are outlined here.


  • Study on thermal properties of bio-char prepared by photo-thermal pyrolysis

    by Dexin Huang, Yankui Wang, Gongxiang Song, Song Hu, Hanjian Li, Yanping Zhang, Yi Wang, Sheng Su, Saad A. El-Sayed, Jun Xiang


  • Open Access

    Availability, sustainability and accessibility of agro crop residue production and solar radiation in Egypt for producing highly chemical products through pyrolysis processes

    by Saad A. El-Sayed, Mohamed A Ismail, Mohamed E Mostafa, Emad H Noseir, Tarek M Khass

    This study examines the large amount of agricultural waste produced in Egypt between 2010 and 2019 by analysing data from various departments within the Agriculture Ministry. It also provides a comprehensive database on the biomass available from agricultural waste in Egypt and its potential applications for producing power, heat and chemical products. When biomass-pyrolysis systems powered by solar energy are used, research demonstrates the potential to convert agricultural waste into a variety of chemical compounds. This approach utilizes solar energy, a clean and renewable source, and has wide-ranging industrial and power generation applications. Despite Egypt’s reliance on agriculture, the country currently utilizes little biomass for energy production and has not previously used it as a source for creating chemical products, which could potentially save on the imported oil used in these industries. The findings of the study are graphically presented using histograms, pie charts, etc. The overall production of residues reached the 30-Mt level in 2019. Because it contains the most rice-cultivated land, Dakahlia (Lower Egypt region) produces the highest percentage of the total residue (37.17%). Qena governorate (Upper Egypt region) produces 1.14 metric tons of residues, with sugarcane accounting for 20.3% of the total.


  • Top Cited Papers
    Open Access

    Thermal degradation behaviour and chemical kinetic characteristics of biomass pyrolysis using TG/DTG/DTA techniques

    by Saad A. El-Sayed, Tarek M. Khass, Mohamed E. Mostafa

    The goal of the current study is to investigate the thermal degradation of palm fronds (PF), olive leaves (OL), and wheat straw (WS) through pyrolysis and calculate their kinetic data using TG-DTG and DTA approaches. The kinetic parameters were assessed using isoconversional techniques like the Ozawa-Flynn-Wall (OFW) and Kissinger–Akahira–Sunose (KAS) methods, as well as model-fitting techniques like the integral method, which employs various diffusion and reaction order models. Using kinetics data models, typical parameters for pyrolysis and thermodynamics were estimated. For PF, OL, and WS, the values of activation energy (E) from the integral method ranged between 8.82 and 167.13, 23.06 and 149.20, and 11.01 and 156.27, respectively, for diffusion models. On the other hand, the values of (E) ranged between 22.3 and 117.49, 51.69 and 92.88, and 23.48 and 125.97, respectively, for reaction-order models. The average activation energies (E) calculated by using PF, OL, and WS samples are 91.9, 69.1, and 65.2, respectively, for the OFW method and 87.5, 101.8, and 63.4, respectively, for the KAS method. The results demonstrated that the integral method provided values of (E) that were almost identical to those produced by the KAS and OFW methods. In the same range of (α), results showed that reaction order models yielded greater frequency factor values than diffusion models, demonstrating how simpler and quicker pyrolysis is. The values of ( $${\Delta \mathrm{G}}_{av}$$ Δ G av ) demonstrated the acceptability of these materials for pyrolysis, and for the OFW and KAS techniques, the sequence of the degradation process was OL > WS > PF. The calculated ( $${\Delta \mathrm{G}}_{av}$$ Δ G av ) showed that more heat energies are required for OL, PF, and WS to dissociate the reagent bonds, which agrees with the (E) values derived from the OFW model. Graphical Abstract


  • Open Access

    Combustion and mass loss behavior and characteristics of a single biomass pellet positioning at different orientations in a fixed bed reactor

    by Saad A. El-Sayed, Mohamed E. Mostafa, Tarek M. Khass, Emad H. Noseir, Mohamed A. Ismail

    This study aims to investigate the combustion characteristics and mass loss behaviors of rice straw and wheat straw biomass pellets experimentally in a laboratory fixed bed combustor under various operating conditions. High-speed photography was used to record images of the combustion process, and a sensitive balance was utilized for recording the particle mass history during the combustion process in addition to K-type thermocouples for temperature measurements. For both materials, the single pellet was exposed to various air temperatures and different flow rates of air. The orientation of the biomass pellet was positioned at various angles from 0 (horizontal), 30°, 45°, 60° (inclined), and 90° (parallel) to the hot air stream at different flow rates. Both glowing reactions and flameless ignition have been noticed in all experiments at all pellet orientations. All pellets experienced low and high luminosity volatiles without flames, followed by a bright radish color and short-lived combustion of the chars. Although the volatile contents of the two materials are identical, the volatile combustion duration of wheat straw (17–258 s) is less than that of rice straw (20–300 s), which could be due to differences in particle sizes, shapes, and structural compositions. The results also show that increased air temperatures lessen the time it takes for volatile and char to ignite and burn off. It also raises the temperature of surface ignition. Starting from the horizontal position and increasing the orientation angle of the pellet, the volatile and char ignition times increase up to 30° and then drop up to 90°, with angle 45° giving the lowest value. The same pattern was also noticed for volatile and char burnout times. The pellet horizontal position (0°) exhibits reduced combustion and mass loss (%) time intervals. The order of increasing the maximum temperature at the pellet surface was 30° > 60° > 90° angles. Increasing the air temperature reduces the times of char combustion, devolatilization, volatile burnout, and char burnout. As the air flow rate increases, the effect on the combustion parameters alternates between increasing and decreasing values.


  • Open Access

    Thermal explosion characteristics of a combustible gas containing fuel droplets

    by Saad A. El-Sayed

    This paper investigated the critical ignition conditions of combustible gas containing liquid fuel droplets. The analysis is done based on the criteria of the thermal explosion theory. It includes analytical and numerical solutions of modeling equations of fuel droplets heating and evaporation by convection and radiation from the surrounding reactive hot gas. The exothermic reaction is usually modeled as a single-step reaction obeying an Arrhenius temperature dependence. The thermal conductivity of the fuel droplet is dependent on temperature. The analytical solution produced relations between the main critical characteristic parameters in all planes of the solution. The results obtained from investigating the effect of the characteristic parameters on the explosion behavior of gas and fuel droplets and the thermal radiation proved that both of them are significant. The study proved that the criticality definitions of the thermal explosion of a single-phase system can be used effectively and efficiently to determine the critical conditions of a multi-phase system. Finally, the application of the numerical solutions of the modeling equations was used to analyze the explosion characteristics of a diesel fuel spray system.