IGIgor Nikolayevich Garkin

Igor Nikolayevich Garkin

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Igor Nikolayevich Garkin has a total of 70 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Ensuring the Performance of a Turbocharger Bearing Assembly of an Internal Combustion Engine

    by Ilgiz G Galiev, Галиев Ильгиз Гакифович, Калиммуллин Марат Назипович, Marat N Kalimullin, Аюгин Николай Петровия, Nikolay P Ayugin, Трояновская Ирина Павловна, Irina P. Troyanovskaya, Войнаш Сергей Александрович, Sergey A Voinash, et al.

    BACKGROUND: To increase power, modern internal combustion engines are equipped with turbochargers operating at high speeds and temperatures. The most heavily loaded component of a turbocharger is the bearing assembly. Its performance is largely determined by the lubrication system. When the engine lubrication systems and turbocharger bearings operate together, small abrasive particles generated by wear on the engine's friction components enter the bearing assembly along with the lubricant. This leads to increased wear and a reduced remaining service life of the bearing and the entire assembly. Therefore, a scientific hypothesis has been put forward that using a separate lubrication system for the turbocharger bearing assembly will increase engine life. AIM: To compare the change in the condition of turbochargers using a standard lubrication system and using a lubrication system for individual bearing assemblies. METHODS: A design for an individual lubrication system for the TKR-11 turbocharger bearing assembly for the YaMZ 238 engine has been developed, the novelty of which is confirmed by a patent. The effectiveness of the individual lubrication system was assessed through the effect of the bearing's remaining life on the mean time between failures of the entire turbocharger, depending on the vehicle's mileage. For this purpose, experimental studies were conducted under real-life operating conditions using KAMAZ vehicles equipped with a TRK-11 turbocharger. The experiment involved 13 vehicles with a standard (combined) lubrication system and three vehicles with an individual bearing assembly lubrication system. Vehicle mileage and changes in the turbocharger bearing assembly clearance were recorded during maintenance. RESULTS: With standard lubrication, the rotor spin-up time was 50 seconds, and by the sixth second, the pressure in the central oil line and in front of the rotor bearing had dropped to zero, indicating a semi-fluid or dry friction mode. With a dedicated lubrication system, the rotor rotated for up to 90 seconds. During this time, the oil pressure was 0.03 MPa. With standard turbocharger bearing lubrication, its service life is exhausted after 160,000 km. With a dedicated lubrication system, only 40% of the turbocharger bearing's service life is consumed over the same period. CONCLUSION: The dependence of the change in the remaining service life of a turbocharger bearing on the vehicle mileage was obtained. With a vehicle mileage of 70,000 km, the remaining service life of a bearing assembly with an individual lubrication system is twice that of one with standard lubrication; for vehicles with a mileage of 100,000 km, the increase was 42%; for vehicles with a mileage of 130,000 km, it was 34%.

  • Open Access

    Automated Eddy Current Monitoring of Thin Metallic Films for Resource-Efficient Manufacturing and Waste Prevention

    by Vladimir Malikov, Sergey Voinash, Farmon Mamatov, Marat Kalimullin, Igor Garkin, Linar Sabitov, Alexey Ishkov, Alexander Filippov

    Defects in thin metallic films may remain undetected until later manufacturing steps have already consumed additional materials and energy. This study developed and experimentally evaluated an automated non-contact eddy current platform for local quality monitoring of thin metallic films. The system combines a miniaturized high-frequency transformer-type probe with a conical ferrite core, three-axis positioning, digital acquisition, and Python (v3.14)-based processing. Cu and Ni films 100–800 nm thick were tested. Across 4–25 MHz, 25 MHz produced the highest signal-to-background ratio. Finite element modeling showed that the ferrite core increased peak eddy current density in the film by more than a factor of two. Two artificial defects measuring 6.2 × 0.11 mm and 4.5 × 0.17 mm were localized; signal gradient analysis reduced length estimation errors to 1.6–6.7%, compared with 6.4–17.8% for direct amplitude analysis. Eddy current spatial profiles agreed with independent photometric measurements (R2 = 0.89). A separate scenario-based engineering assessment examined potential resource savings from post-deposition inspection. Early detection can prevent unnecessary downstream processing of defective substrates, supporting waste prevention and resource efficiency. The sustainability values reported here are scenario estimates rather than direct industrial measurements.

  • ОПТИМИЗАЦИЯ ОРГАНИЗАЦИИ РАБОТ НА ОБЪЕКТАХ КУЛЬТУРНОГО НАСЛЕДИЯ: ЭНТРОПИЙНЫЙ ПОДХОД

    by Igor Nikolayevich Garkin, Anton Olegovich Popov, Olga Leonidovna Viktorova

    Применение энтропийного подхода для оптимизации организации реставрационных и строительно-монтажных работ на объектах культурного наследия. Предложена математическая модель, основанная на теории информационной энтропии Шеннона, позволяющая количественно оценить степень неопределенности и хаотичности в организации работ. Разработан метод минимизации энтропии системы управления проектом через оптимальное распределение ресурсов, последовательности выполнения операций и координации исполнителей. Приведен практический пример расчета энтропийных показателей для типового объекта культурного наследия с демонстрацией эффективности предложенного подхода. Результаты исследования показывают, что снижение организационной энтропии на 35–40 % приводит к сокращению сроков выполнения работ на 20–25 % и повышению качества реставрации при соблюдении требований сохранности объекта.

  • Open Access

    Modeling the Effectiveness of Damping Systems in Building Structures under Seismic Impact Using the Generalized Ornstein-Uhlenbeck Process

    by И. Н. Гарькин, L. S. Sabitov, E. M. Tupikova

    Introduction. At the current stage of science and technology development, the issues of vibration protection of buildings are being intensively investigated, particularly for special structures of a high responsibility class. Various damper designs are also being developed and tested. Modeling the response of damper systems is an urgent task with both deterministic and stochastic approaches to solving it. This study demonstrates the features of the stochastic approach in a variant of the mathematical model of the generalized Ornstein-Uhlenbeck process. It is possible to the effect of using a nonlinear damper in a specific case can be evaluated by means of this model, and the conclusions can be made regarding its benefits. Materials and Methods. The major research method is the solution of a stochastic differential equation. A numerical experiment is shown with a real example of analyzing the dynamic response of a turbo unit with a viscoelastic nonlinear damper to a random seismic impact. The application of the generalized Ornstein-Uhlenbeck process for mathematical modeling of the dynamic response of damping devices to seismic impacts on critical energy infrastructure is analyzed. Research Results. A stochastic model is set forth that takes into account both the random nature of seismic excitations and the nonlinear rheological characteristics of dampers. The results of the numerical experiment confirm that while calculating by means of the described model, the use of a nonlinear damper is justified, the mean-square values of the displacement response are reduced by more than two times helping to reduce seismic risks for the turbine unit as well as to increase its dynamic stability and reliability of operation under the action of random impacts. Discussion and Conclusions. The developed methodology provides a quantitative assessment of the effectiveness of a variety of classes of damper systems and allows for parametric optimization of their settings in order to maximize their protective capacity and to reduce the vibration and dynamic loads on energy equipment. The theoretical significance of the study is the suggested calculation methodology, while the practical significance is in the assessment and recommendations for making use of viscoelastic dampers for a high responsibility class of structures.

  • Open Access

    Optimizing Crop Rotation and Cereal Saturation for Sustainable Winter Wheat Production Under Semiarid Conditions of Uzbekistan

    by Yurii Syromiatnykov, Shakhista Ishniyazova, Irina Troyanovskaya, Sergey Voinash, Igor Garkin, Vladimir Malikov, Alexandra Orekhovskaya

    In this study, the effect of crop rotation structure and cereal saturation on winter wheat productivity under semiarid conditions of Uzbekistan was analyzed. The research was conducted over a 20‐year period (2002–2022) at the Samarkand branch of the Research Institute of Agriculture and Agro‐Technologies. Ten rotation schemes were examined. The experiment included three‐field and four‐field short crop rotations with different levels of cereal saturation (33.3%–100%) and contrasting predecessor crops, including legumes, cereals, row crops, and bare fallow. Crop rotation systems with varying levels of cereal saturation and diverse precursor crops were investigated. Winter wheat yield data were statistically analyzed using one‐way analysis of variance (ANOVA) followed by Tukey’s HSD test ( p < 0.05), allowing the assessment of both productivity and interannual yield stability under contrasting rotation systems. It was determined that rotations incorporating legumes significantly improved grain yield and marketable output. It was established that the highest yields were observed in four‐field rotations with chickpea as a precursor and full cereal saturation. It was revealed that continuous winter wheat cultivation resulted in the lowest yields due to soil fatigue and disease accumulation. Integration of legumes improved soil nitrogen availability and resilience to climatic stress. Diversified rotations provided better interannual yield stability. Optimizing rotation structure is critical for sustainable wheat production in arid environments. It was proposed that legume–cereal rotations with ≥ 75% cereal saturation represent a viable model for semiarid farming systems.


  • Open Access

    Architectural Solutions for Municipal Housing in Spain

    by E. L. Ogienko, I. N. Gar'KIn, A. A. Kolesnikov

    The relevance of the study is determined by the growing need for high-quality social housing for vulnerable categories of the population in terms of urbanization. The Spanish experience in designing municipal houses, is of particular interest due to its integrated approach that combines accessibility, comfort and integration into the urban environment. Purpose: The purpose of the study is to identify the key principles of social housing for municipal rent in Spain based on the analysis of completed projects. Methodology: The analysis of four residential complexes in Barcelona, Madrid and Vitoria; comparative analysis of architectural planning solutions, type classification of the spatial organization; assessment of the integration of social infrastructure and principles of formation in the living environment. Research findings: It is shown that social housing in Spain is characterized by a variety of planning structures with a predominance of sectional organization; mandatory inclusion of service, trade or work facilities; location in central areas with the developed infrastructure; adaptive planning solutions for different categories of residents; high standards of energy efficiency and environmental friendliness. It is shown that the Spanish experience in design of social houses is characterized by the energy efficiency, flexibility of planning solutions and creation of a fullfledged living environment that is not inferior in quality to commercial housing. Value: Of particular value is the principle of housing affordability, based not on the income level, but on the life situation of potential residents. The results obtained can be used to develop social housing concepts in other countries, including the adaptation to local conditions and social requirements.

  • Open Access

    An Investigation of Maize Tillage and Residue Management in Uzbekistan

    by Yurii Syromiatnykov, Shakhista Ishniyazova, Sergey Voinash, Alexandra Orekhovskaya, Igor Garkin, Vladimir Malikov

    Tillage and crop‐residue management can substantially modify soil physical conditions, water storage, and maize performance in semi‐arid environments. A stationary field experiment was conducted during 2020–2022 at the Samarkand Agricultural Development Research Station, Uzbekistan, to compare conventional tillage, shallow tillage, and no‐till residue‐management systems on permanent maize plots. The randomized complete block design included four blocks, with repeated observations on the same plots over three growing seasons. Soil bulk density, gravimetric moisture content, and penetration resistance were determined at presowing, V12–V13, and grain‐maturity stages in the 0–15 and 15–30 cm layers. Soil–water storage was calculated for the 0–30 cm profile, and grain yield was adjusted to 14% moisture. No‐till maintained the highest water storage before sowing and at V12–V13, whereas conventional tillage maintained the greatest water storage at grain maturity. Conventional tillage consistently produced the lowest bulk density and penetration resistance. At grain maturity in the 15–30 cm layer, penetration resistance was 3.74 MPa under conventional tillage, 4.07 MPa under shallow tillage, and 4.17 MPa under no‐till. The model‐estimated marginal mean grain yield was 6.25 t ha −1 under conventional tillage, 5.94 t ha −1 under shallow tillage, and 5.73 t ha −1 under no‐till. The treatment ranking remained stable over all 3 years. Under the short‐term conditions of this experiment, conventional tillage provided the highest maize yield, while shallow tillage generated intermediate responses in soil physical properties and crop productivity.

  • ПРИМЕНЕНИЕ ЭВОЛЮЦИОННО‐СТАБИЛЬНОЙ СТРАТЕГИИ ДЛЯ ПОВЫШЕНИЯ ЭФФЕКТИВНОСТИ РАБОТЫ СТРОИТЕЛЬНЫХ КОНСТРУКЦИЙ

    by Igor Nikolaevich Garkin

    В данной работе рассматривается применение концепции эволюционно-стабильной стратегии в строительной инженерии с целью оптимизации эффективности работы строительных конструкций. Предлагается инновационный подход к проектированию и эксплуатации инженерных систем, который базируется на принципах теории игр и эволюционной биологии. Концепция эволюционно-стабильной стратегии предполагает поиск таких решений при проектировании конструкций, которые устойчивы к появлению альтернативных стратегий и обеспечивают долгосрочную надежность и адаптивность конструкций к внешним воздействиям. В рамках исследования подробно анализируются методы адаптации отдельных структурных элементов и целых конструктивных систем к изменяющимся условиям эксплуатации, включая переменные нагрузки, климатические и техногенные факторы. Для этого используются специальные алгоритмы, построенные по аналогии с процессами естественного отбора, когда менее эффективные решения постепенно элиминируются, а наиболее приспособленные и устойчивые подходы сохраняются и тиражируются в новых инженерных проектах. В ходе численных экспериментов, проведенных с различными типами строительных конструкций, была продемонстрирована значительная прибавка в их эксплуатационных характеристиках: применение методов эволюционно-стабильной стратегии позволило повысить эффективность работы на 15–25 % относительно традиционных схем проектирования. Такой прирост достигается за счет более рационального распределения материалов, улучшения устойчивости к экстремальным воздействиям и способности конструкций к самоадаптации в условиях неопределенности.

  • ИСПОЛЬЗОВАНИЕ ДИФФЕРЕНЦИАЛЬНЫХ УРАВНЕНИЙ ДВИЖЕНИЯ ТЕЛА ПРИ ОПРЕДЕЛЕНИИ ПАРАМЕТРОВ ВИБРОЗАЩИТЫ

    by Aleksandr Yevgenyevich Yevseyev, Igor Nikolayevich Garkin, Edward Yunusovich Abdullazyanov

    Статья посвящена исследованию колебательного движения среды и вопросам защиты строительных конструкций от колебаний. В частности, на основании общих дифференциальных уравнений движения идеально упругого тела разработана и предложена методика расчета оптимальных параметров виброзащитных экранов, расположенных на пути движения волн вибрации, что помогает снизить воздействия на строительные конструкции зданий и сооружений. Полученная методика апробирована авторами при реализации реального строительного проекта. Результаты апробации позволяют говорить о достоверности полученных результатов и эффективности созданной методики.


  • ОБ ОСОБЕННОСТЯХ РАБОТЫ ОЦИНКОВАННЫХ СТРОИТЕЛЬНЫХ КОНСТРУКЦИЙ В УСЛОВИЯХ АГРЕССИВНЫХ СРЕД

    by Aleksey Sergeyevich Kolobanov, Natalya Vladimirovna Tarasova, Linar Salikhzanovich Sabitov, Igor Nikolayevich Garkin, Darya Sergeyevna Sorokina

    В настоящее время безопасность зданий и сооружений получает жизненно важный ориентир. Ситуация последних лет, а также развитие современных технологий показывают, что требуется новый подход к мониторингу зданий и сооружений. Для их безопасной эксплуатации необходимо своевременно выполнять мероприятия не только по устранению дефектов и повреждений, но и выявлению причин их возникновения. В статье рассматриваются некоторые аспекты работы металлических конструкций в агрессивной среде, а также скорость коррозионного повреждения металлических конструкций на примере профилированного настила покрытия. Исследование произведено на основе анализа выполненных работ по техническому обследованию и экспертизе зданий и сооружений, в частности оцинкованных металлических конструкций