AEAmir Hossein Elhamirad

Amir Hossein Elhamirad

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Amir Hossein Elhamirad has a total of 110 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Functional ready-to-eat cereal-based snacks supplemented with food by-products

    by Saeedeh Hashemian, Amir Hossein Elhamirad, Elnaz Milani, Masoud Shafafi Zenoozian, Mohammad Armin

    With the increasing population and food shortages, the need for innovative approaches to producing foods with high nutritional value has become more pronounced. In this study, we investigated the impact of incorporating apple pomace (AP) and wheat bran (WB) which are rich in phenolics and fiber into extruded snacks made from oat and broken rice. The central composite design was used to examine the effects of screw speed (120–200 rpm), feed moisture (14–22%), and AP/WB ratios (25:75, 50:50, 75:25) on the physicochemical, microstructural, functional, and antioxidant properties of the snacks. Our results demonstrated that incorporating AP and WB significantly enhanced the nutritional and functional properties of the extruded snacks. Increasing the AP ratio led to improved functional properties while concurrently reducing the expansion index and cell wall thickness. Furthermore, an increase in screw speed from 120 to 160 rpm resulted in a noticeable increase in total phenolic content without reaching statistical significance (192.33–211.77 µg GA/g). Increasing the screw speed also increased the antioxidant activity (55.35–64.75%), while a further increase to 200 rpm led to a decrease in the water absorption index. Additionally, increasing feed moisture content increased water solubility index while decreasing the expansion and water absorption indices. We identified the optimal processing conditions as an AP ratio of 53.39%, a screw speed of 120 rpm, and a feed moisture content of 15.45%. These findings highlight the potential of utilizing food by-products, such as AP and WB, to create healthier and more sustainable extruded snacks while simultaneously reducing food waste and mitigating environmental pollution.


  • Open Access

    Enhanced Recovery of Apple Pomace Phenolic Compounds: Optimizing Subcritical Water Extraction

    by Mahsa Derakhshan, Amir Hossein Elhami Rad, Majid Javanmard Dakheli, Parvin Sharayei, Mohammad Armin

    This study was aimed at optimizing the extraction process of phenolic compounds, particularly antioxidants and antimicrobial agents, from apple pomace using the subcritical water extraction method. The Box–Behnken experimental design was utilized to ascertain the optimal extraction conditions, focusing on maximizing yield, phenolic compound content, and antioxidant activity. Three independent variables were investigated: extraction temperature (120°C, 140°C, and 160°C), extraction time (20, 30, and 40 min), and water‐to‐apple pomace ratio (1:20, 1:40, and 1:60 g/mL). The optimized subcritical water extraction process yielded a significantly higher extraction efficiency (18.05%), total phenolic content (1341.11 mg/100 g), and 2,2‐diphenyl‐1‐picrylhydrazyl (DPPH) scavenging capacity (92.39%) compared to the conventional maceration method. The experimental results aligned well with the predicted values obtained from the Box–Behnken model. The antimicrobial properties of the optimized extract were assessed against Staphylococcus aureus , Escherichia coli , and Aspergillus niger through the serial dilution method. The extract at a concentration of 30 mg/100 mL exhibited superior antifungal and antibacterial properties compared to potassium sorbate (10 mg/100 mL). This research demonstrates the potential of subcritical water extraction as a sustainable and efficient method for extracting phenolic compounds from apple pomace, offering a promising alternative to conventional methods and contributing to the valorization of agricultural waste.


  • Open Access

    Use of Mastic Gum and Pistacia atlantica Gum in Maintaining the Quality of Shrimp During Storage

    by Mahnia Sharifi, Amir Hossein Elhami Rad, Akram Sharifi, Ahmad Pedram Nia

    Shrimp ( Litopenaeus vannamei ) is very sensitive to oxidation damage during the storage process. Meanwhile, the use of edible coating illustrates promising findings in increasing the shelf life, while also preserving meat quality. In the current study, the Pistacia atlantica gum (PAG) was extracted, microcoated, and finely combined with mastic gum for coating shrimp during the storage process. Fresh shrimp were randomly divided into six groups: (1) control shrimps were not coated with any coating solution, (2) shrimps were coated with the coating mastic gum (100%), (3) shrimps were coated with the coating mastic gum (30%) containing PAG (70%), (4) shrimps were coated with mastic gum (45%) containing PAG (55%), (5) shrimps were coated with mastic gum (15%) containing PAG (45%), and (6) commercial sample (shrimps were coated with a synthetic cellophane polymer). The highest inhibition of free radicals, amounts of phenolic compounds, and microcoating efficiency were obtained with spray‐drying microencapsulation. With the increase in the concentration of mastic gum of nanoemulsions, the brightness intensity decreased significantly ( p < 0.05), and the intensity of redness, yellowness index (YI), and turbidity of coatings increased significantly ( p < 0.05). By increasing the level of PAG in nanoemulsions, the particle size decreased significantly ( p < 0.05). The film coating improved the pH, color, and texture properties ( p < 0.05). The packaging film exhibited some antioxidant activity, which was significantly improved ( p < 0.05) by the addition of the PAG extract with significant inhibition diameters against DPPH free radical. The results outlined from this study show that PAG has potential bactericidal effects against S. aureus and E. coli (30% mastic gum and 70% PAG showed the best results). Therefore, this kind of packaging is impressive in enhancing the shelf life of shrimp during the storage process at 4°C.

  • Open Access

    Investigating the Effect of Pulsed Electric Field and Microencapsulation on the Amount of Effective Compounds and Antimicrobial Activity of Hop Plants

    by Mehdi Kamelan, Ahmad Pedram Nia, Parvin Sharayei, Amir Hossein Elhami Rad, Mohammad Reza Saeidi Asl

    The research aimed to investigate the impact of pulse electric field–assisted extraction on the extraction yield of effective compounds and the antioxidant activity of hop plants. The study used varying voltages (VPEF: 2000, 4000, and 6000 V/cm) and numbers of pulses (NPEF: 40, 50, and 60) in the extraction process. The results revealed that the extraction efficiency and the antioxidant properties of the extract were affected by the intensity and number of pulses. The optimized conditions for extraction yielded the following results: extraction efficiency of 17.62%, 1280.46 mg GAE/100 g of total phenolic compounds, 3.74 mg/L of α ‐acids, 5.78 mg/L of β ‐acids, 77.49% DPPH free radical scavenging, and 529.33 μ mol Fe 2+ /g of ferric reducing/antioxidant power. Moreover, the optimized hop extract was microencapsulated by maltodextrin, inulin, and Arabic gum as wall materials. The optimized composition contained 55.8 g/100 g of maltodextrin and 42.2 g/100 g of inulin, leading to better preservation of phenolic compounds with maximum antioxidant activity. The resulting microencapsulated composition had a glass transition temperature of 40.8°C, making it suitable for maintaining effective compounds at ambient temperature. Additionally, the antimicrobial activity of the free and microencapsulated hop extract was observed against Escherichia coli , Staphylococcus aureus , and Aspergillus niger , with greater activity against Gram‐positive bacteria than Gram‐negative bacteria and fungi.


  • Investigating the structural characteristics of nanoencapsulation white tea extract using polylactic glycolic acid (PLGA)

    by Elham Ahmadi, Nasrin Mollania, Zahra Latifi, Amir Hossein Elhamirad, Ahmad Pedram Nia

  • Open Access

    Effect of Allium Jesdianum's extract on the physicochemical, antioxidant, antimicrobial and sensory properties of Sausage characteristics

    by Akram Ghorbani, Kamiar Mahmoudifar, Samira Shokri, Yeganeh Mazaheri, Ehsan Shamloo, Alieh Rezagholizade-Shirvan, Amir Hossein Elhamirad


  • Optimization of the extrusion parameters for the production of lentil–quinoa extrudates enriched with pumpkin

    by Minoo Eftekhariyazdi, Masoud Shafafi Zenoozian, Elnaz Milani, Amir Hossein Elhami Rad, Mohammad Armin

    This study aimed to develop a protein-fiber-rich extruded product based on yellow lentil, quinoa, and pumpkin flours. The final product quality is affected by formulation and extrusion parameters. Therefore, the effect of the pumpkin-flour ratio (A: 25–75%) and feed moisture content (C: 14–22%) besides barrel screw speed (B: 120–180 rpm) on the physical attributes of extrudates was investigated. Box–Behnken experimental design and stepwise-response surface method were used to analyze the effects of various process variables and ingredients on extrudates. The pumpkin-flour ratio had a significant positive correlation with bulk density (BD), water solubility index (WSI), and oil absorption index. Whereas the correlation between pumpkin-flour ratio with hardness, porosity, expansion ratio (ER), and water absorption index (WAI) was negative ( P < 0.05). The feed moisture content positively affected the water activity ( aw ) and WAI and negatively affected the harness of samples ( P < 0.05). The screw speed had a positive effect on ER, porosity, and WSI, whereas it negatively influenced the hardness, BD, and aw . By increasing the pumpkin-flour ratio, air cell size and wall thickness of samples had been decreased. The results showed that 44.2% pumpkin flour, 22% feed moisture, and 172.1 rpm screw speed gave an optimized product. There was no significant difference between predicted and experimental values (except for ER). The optimized snack was a good source of fiber (around 15%), protein (17.3%), and antioxidants (TPC = 15.28 mg GAE.g-1 and antiradical scavenging activity (DPPH) = 33.66%). The caloric value of the optimized snack was 362.6 cal.100g −1 . The current formulation can be considered as the base of snack food or plant-based meat alternatives.


  • Open Access

    Effect of Substituting Wheat Flour With Protein‐Rich Sources on Quality of Instant Noodles

    by Mona Rahimi, Amir Hossein Elhamirad, Masoud Shafafi Zenoozian, Afshin Jafarpour, Mohammad Armin

    There is a lack of dietary fiber and some essential amino acids in instant noodles. Enriching this popular food with protein‐ and fiber‐rich sources is important to improve the nutritional quality of noodles. The current study is aimed at enriching instant noodles by substituting wheat flour with lentil flour (7%–35%: L7%, L21%, and L35%), soy‐protein isolate (1%–5%: S1%, S3% and S5%), egg‐white protein (1–5: E1%, E3%, and E5%) and Spirulina platensis (1%–5%: S.p1%, S.p3% and S.p5%). The physicochemical, microbial, textural, and sensorial properties of noodle samples were investigated. The spatial relationship between parameters was also evaluated based on principal component analysis (PCA) to select the suitable noodle formulation. The highest protein (17.06%) and lowest carbohydrate contents (76.44%) were for L35%. The lowest (1.69%) and highest fat contents (2.04%) were for S5% and S.p5%m, respectively (p > 0.05). Energy values varied from 394.83 (E5%) to 396.37 kcal/100 g (S.p5%). There was no significant difference between the microbial quality of noodle samples (p > 0.05). The hardness of noodles with 1%–5% soy protein, 21% or more lentil flour, and 3% or more egg‐white/Spirulina was higher than the control/unenriched group (p < 0.05). The color difference of E1 and E3% with the control sample was not obvious (ΔE∗ < 3). Although all the ingredients improved the nutritional value of the noodles, the overall acceptance of samples with 3% or more of Spirulina was lower than the acceptable limit (a score of 3). According to PCA, when the nutritional value and sensory acceptance are important, the L35% may be a better choice. E1%, E3%, S1%, S5%, and L7% noodles received almost the same sensory score as the control sample, while they had more nutritional values. A combination of animal, plant, and microalgae protein sources may provide a noodle with high nutritional value, containing a wide range of essential amino acids and bioactive compounds. More research is needed to optimize such a formulation.