Bijal Kottukkal Bahuleyan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Research Subjects
Bijal Kottukkal Bahuleyan has a total of 99 co-authors. Here are the top co-authors by number of shared publications:
- Il Kim
School of Chemical Engineering, Pusan National University, Busan 46241, Republic of Korea
10 shared publications Chang-Sik Ha
The WCU Center for Synthetic Polymer Bioconjugate Hybrid Materials, Department of Polymer Science and Engineering, Pusan National University, Busan, Korea
8 shared publications- Mamdouh Ahmed Al-Harthi
Department of Chemical Engineering, King Fahd University of Petroleum and Minerals, Dhahran 31261, Saudi Arabia
7 shared publications - Manammel Thankappan Ramesan
University of Calicut
6 shared publications Il Kim
5 shared publicationsDae-Won Park
Pusan National University
4 shared publications
Latest Publications
- 21 October 2026
- Published by Wiley in Polymer Engineering & Science
Eco‐Friendly Mechanochemical Engineering of Poly( o ‐toluidine)/Nb 2 O 5 Composites With Improved Electrical, Dielectric, and Antibacterial Properties
Solvent‐free mechanochemical grinding has emerged as an efficient, scalable, and environmentally benign technique for fabricating conducting polymer composites, providing simple processing, low cost, and minimal environmental impact. In the present work, poly(o‐toluidine) (POT)/niobium pentoxide (Nb 2 O 5 ) composites were successfully prepared through facile solvent‐free mechanochemical mixing. The effects of Nb 2 O 5 inclusion on the structural, optical, morphological, dielectric, electrical, and antibacterial characteristics of POT was comprehensively explored. FTIR analysis confirmed the attachment of the filler to POT through strong polymer‐filler interactions. UV–Vis spectroscopy revealed enhanced optical properties, as evidenced by an increased refractive index and a reduction in the bandgap with increasing Nb 2 O 5 loading. XRD analysis validated the presence of Nb 2 O 5 crystalline phases in the POT matrix, while FE‐SEM analysis demonstrated uniform filler dispersion, with the 15 wt.% composite showing the most homogeneous morphology. Studies on dielectric behavior and AC conductivity indicated that higher Nb 2 O 5 loadings resulted in improved charge transport and polarization. The POT/15 wt.% Nb 2 O 5 composite exhibited the highest dielectric constant and AC conductivity, illustrating the synergistic effect of optimal filler loading on electrical performance. Furthermore, the composites displayed significant antimicrobial activity against Escherichia coli . The solvent‐free fabrication process and multifunctional properties highlight the potential of POT/Nb 2 O 5 composites for advanced optoelectronic devices.
- 21 October 2026
- Published by Wiley in Polymer Engineering & Science
Eco‐Friendly Mechanochemical Engineering of Poly( o ‐toluidine)/Nb 2 O 5 Composites With Improved Electrical, Dielectric, and Antibacterial Properties
Solvent‐free mechanochemical grinding has emerged as an efficient, scalable, and environmentally benign technique for fabricating conducting polymer composites, providing simple processing, low cost, and minimal environmental impact. In the present work, poly(o‐toluidine) (POT)/niobium pentoxide (Nb 2 O 5 ) composites were successfully prepared through facile solvent‐free mechanochemical mixing. The effects of Nb 2 O 5 inclusion on the structural, optical, morphological, dielectric, electrical, and antibacterial characteristics of POT was comprehensively explored. FTIR analysis confirmed the attachment of the filler to POT through strong polymer‐filler interactions. UV–Vis spectroscopy revealed enhanced optical properties, as evidenced by an increased refractive index and a reduction in the bandgap with increasing Nb 2 O 5 loading. XRD analysis validated the presence of Nb 2 O 5 crystalline phases in the POT matrix, while FE‐SEM analysis demonstrated uniform filler dispersion, with the 15 wt.% composite showing the most homogeneous morphology. Studies on dielectric behavior and AC conductivity indicated that higher Nb 2 O 5 loadings resulted in improved charge transport and polarization. The POT/15 wt.% Nb 2 O 5 composite exhibited the highest dielectric constant and AC conductivity, illustrating the synergistic effect of optimal filler loading on electrical performance. Furthermore, the composites displayed significant antimicrobial activity against Escherichia coli . The solvent‐free fabrication process and multifunctional properties highlight the potential of POT/Nb 2 O 5 composites for advanced optoelectronic devices.
- Open Access
- 6 May 2025
- Published by Yanbu Industrial College
- Vol. 22 (1) , 14-19
Homonuclear Bimetallic Fe(II) or Co(II) Complexes for Selective Oligomerization Process
Synthesis of tetrakis-bisimino pyridine ligand based Fe or Co complexes [(MeAr2Py-N2)2M2Cl4, M = Fe/Co, Ar = -C6H3, Py = -C5H2N] and their application towards ethylene oligomerization with the cocatalysts, ethyl aluminium sesquichloride and methylaluminoxane, were studied. Ligands were characterized by 1H, 13C NMR and elemental analysis. The complexes were characterized by elemental analysis and mass spectra. Both the complexes were active towards ethylene oligomerization. Fe complex showed better activity than its Co analogue to form oligomers C6 (Fe complex) and C4 (Co complex) as major products. Cooperative mechanism of the two adjacent metal centers during the reaction was observed. Cooperative mechanism enhanced the oligomerization activity.
- 6 May 2025
- Published by Yanbu Industrial College
- Vol. 22 (1) , 14-19
Open AccessHomonuclear Bimetallic Fe(II) or Co(II) Complexes for Selective Oligomerization Process
Synthesis of tetrakis-bisimino pyridine ligand based Fe or Co complexes [(MeAr2Py-N2)2M2Cl4, M = Fe/Co, Ar = -C6H3, Py = -C5H2N] and their application towards ethylene oligomerization with the cocatalysts, ethyl aluminium sesquichloride and methylaluminoxane, were studied. Ligands were characterized by 1H, 13C NMR and elemental analysis. The complexes were characterized by elemental analysis and mass spectra. Both the complexes were active towards ethylene oligomerization. Fe complex showed better activity than its Co analogue to form oligomers C6 (Fe complex) and C4 (Co complex) as major products. Cooperative mechanism of the two adjacent metal centers during the reaction was observed. Cooperative mechanism enhanced the oligomerization activity.
- Open Access
- 30 November 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (12) , 2390
Growth of Homogeneous Luminescent Silicon–Terbium Nanowires by One-Step Electrodeposition in Ionic Liquids
An electrodeposition method for the growth of homogeneous silicon–terbium nanowires (NWs) with green light emission is described. The method involves template-assisted electrochemical co-deposition of Si/Tb NWs with 90-nm diameter from an electrolyte bath containing Si and Tb precursors in an ionic liquid (IL). This method of deposition is advantageous over other conventional techniques as it is relatively simple and cost-effective and avoids harsh deposition conditions. The deposited NWs are of uniform dimensions with homogeneous composition incorporating 10% of Tb and exhibit intense room temperature (RT) luminescence in the visible range due to Tb emission. These results were confirmed by combining classical characterization such as scanning electron microscopy (SEM) and photoluminescence (PL) performed on an assembly of NWs with spatially resolved experiments such as transmission electron microscopy (TEM) and cathodoluminescence (CL). This electrodeposition method provides an alternative and extremely simple approach for depositing silicon-rare earth nanostructures for optical and sensing applications.
- 30 November 2020
- Published by MDPI AG in Nanomaterials
- Vol. 10 (12) , 2390
Open AccessGrowth of Homogeneous Luminescent Silicon–Terbium Nanowires by One-Step Electrodeposition in Ionic Liquids
An electrodeposition method for the growth of homogeneous silicon–terbium nanowires (NWs) with green light emission is described. The method involves template-assisted electrochemical co-deposition of Si/Tb NWs with 90-nm diameter from an electrolyte bath containing Si and Tb precursors in an ionic liquid (IL). This method of deposition is advantageous over other conventional techniques as it is relatively simple and cost-effective and avoids harsh deposition conditions. The deposited NWs are of uniform dimensions with homogeneous composition incorporating 10% of Tb and exhibit intense room temperature (RT) luminescence in the visible range due to Tb emission. These results were confirmed by combining classical characterization such as scanning electron microscopy (SEM) and photoluminescence (PL) performed on an assembly of NWs with spatially resolved experiments such as transmission electron microscopy (TEM) and cathodoluminescence (CL). This electrodeposition method provides an alternative and extremely simple approach for depositing silicon-rare earth nanostructures for optical and sensing applications.
- Open Access
- 1 January 2020
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2020 (1)
Corrigendum to “Mechanical Properties of Polyethylene‐Carbon Nanotube Composites Synthesized by In Situ Polymerization Using Metallocene Catalysts”
In the article titled “Mechanical Properties of Polyethylene-Carbon Nanotube Composites Synthesized by In Situ Polymerization Using Metallocene Catalysts” [1], author Bijal Kottukkal Bahuleyan was affiliated to Department of General Studies, Yanbu Industrial College, P.O. Box 30436, Jubail, Saudi Arabia, which is incorrect. The correct affiliation for the author “Bijal Kottukkal Bahuleyan” is “Department of General Studies, Yanbu Industrial College, P.O. Box 30436, Yanbu, Saudi Arabia.”
- 1 January 2020
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2020 (1)
Open AccessCorrigendum to “Mechanical Properties of Polyethylene‐Carbon Nanotube Composites Synthesized by In Situ Polymerization Using Metallocene Catalysts”
In the article titled “Mechanical Properties of Polyethylene-Carbon Nanotube Composites Synthesized by In Situ Polymerization Using Metallocene Catalysts” [1], author Bijal Kottukkal Bahuleyan was affiliated to Department of General Studies, Yanbu Industrial College, P.O. Box 30436, Jubail, Saudi Arabia, which is incorrect. The correct affiliation for the author “Bijal Kottukkal Bahuleyan” is “Department of General Studies, Yanbu Industrial College, P.O. Box 30436, Yanbu, Saudi Arabia.”
- Open Access
Silicon Wafer Functionalization with a Luminescent Tb(III) Coordination Complex: Synthesis, Characterization, and Application to the Optical Detection of NO in the Gas Phase
A new luminescent Tb-DOTAGA (1,4,7,10-tetraazacyclododecane-1-glutaric-4,7,10- triacetic acid) complex (TbL) was synthesized and covalently immobilized on a silicon wafer. The grafting process was monitored by means of IR and XPS spectroscopies and the optical properties of the functionalized silicon wafer (TbL@Si) were investigated by fluorescence experiments. A homemade setup was then implemented in order to follow TbL@Si optical properties in the presence of gaseous nitric oxide (NO). The prima facie results indicated that in the presence of NO, the wafer fluorescence was partially quenched. This quenching was reversible as soon as NO was pumped outside the fluorescence cell, which could be interesting for the further development of lanthanide labelled silicon wafers as gas phase sensors.
Open AccessSilicon Wafer Functionalization with a Luminescent Tb(III) Coordination Complex: Synthesis, Characterization, and Application to the Optical Detection of NO in the Gas Phase
A new luminescent Tb-DOTAGA (1,4,7,10-tetraazacyclododecane-1-glutaric-4,7,10- triacetic acid) complex (TbL) was synthesized and covalently immobilized on a silicon wafer. The grafting process was monitored by means of IR and XPS spectroscopies and the optical properties of the functionalized silicon wafer (TbL@Si) were investigated by fluorescence experiments. A homemade setup was then implemented in order to follow TbL@Si optical properties in the presence of gaseous nitric oxide (NO). The prima facie results indicated that in the presence of NO, the wafer fluorescence was partially quenched. This quenching was reversible as soon as NO was pumped outside the fluorescence cell, which could be interesting for the further development of lanthanide labelled silicon wafers as gas phase sensors.
- 27 January 2018
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 26 (7) , 2983-2991
Effect of Silver Doped Zinc Oxide as Nanofiller for the Development of Biopolymer Nanocomposites from Chitin and Cashew Gum
- 27 January 2018
- Published by Springer Nature in Journal of Polymers and the Environment
- Vol. 26 (7) , 2983-2991
Effect of Silver Doped Zinc Oxide as Nanofiller for the Development of Biopolymer Nanocomposites from Chitin and Cashew Gum
- Open Access
- 1 January 2018
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2018 (1)
Mechanical Properties of Polyethylene‐Carbon Nanotube Composites Synthesized by In Situ Polymerization Using Metallocene Catalysts
The influence of multiwalled carbon nanotubes (MWCNTs) on the properties of polyethylene prepared by in situ polymerization using metallocene catalyst (Cp2ZrCl2) in combination with methylaluminoxane has been studied. The MWCNT was incorporated in the polymer matrix adopting a stirring method. Incorporation of MWCNT causes a drop in molecular weight of the polymer along with an increase in number of branches and increase in crystallinity. It was also observed that addition of MWCNT during metallocene‐catalyzed polymerization caused a drop in both the dynamic modulus and Young’s modulus of polyethylene. But the drop in tensile strength was minimal, and there was an increase in elongation at break along with consequent increase in energy at break.
- 1 January 2018
- Published by Wiley in Advances in Materials Science and Engineering
- Vol. 2018 (1)
Open AccessMechanical Properties of Polyethylene‐Carbon Nanotube Composites Synthesized by In Situ Polymerization Using Metallocene Catalysts
The influence of multiwalled carbon nanotubes (MWCNTs) on the properties of polyethylene prepared by in situ polymerization using metallocene catalyst (Cp2ZrCl2) in combination with methylaluminoxane has been studied. The MWCNT was incorporated in the polymer matrix adopting a stirring method. Incorporation of MWCNT causes a drop in molecular weight of the polymer along with an increase in number of branches and increase in crystallinity. It was also observed that addition of MWCNT during metallocene‐catalyzed polymerization caused a drop in both the dynamic modulus and Young’s modulus of polyethylene. But the drop in tensile strength was minimal, and there was an increase in elongation at break along with consequent increase in energy at break.