DDDavid T. Dekadjevi

David T. Dekadjevi

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


David T. Dekadjevi has a total of 140 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Lanthanum trace element doping of Galfenol thin films for enhanced magnetostriction

    by M Liparo, C Bou Karroum, A Halusiak, A Fessant, L Rault, A R E Prinsloo, C J Sheppard, D T Dekadjevi, D Spenato, J-Ph Jay

    This study investigates the enhancement of magnetostrictive properties in trace Lanthanum-doped (0.2%) Galfenol thin films, Fe 80.9 Ga 18.9 La 0.2 of thicknesses t = 5, 7.5, 15 nm, positioning them for advanced information and communication technologies. Lanthanum doping significantly improves both magnetic softness and magnetostriction without compromise. Notably Fe 80.9 Ga 18.9 La 0.2 samples exhibits remarkably low coercive fields, making them magnetically softer than undoped Galfenol. This softness combined with low ‘activation’ fields for magnetostrictive stress is crucial for low-consumption Micro Electronic Mechanical Systems applications. Furthermore, a 33% gain in magnetoelastic properties is observed for the 5 nm sample with a magnetoelastic coupling coefficient | b eff | reaching 2 MPa. These results underscore the significant potential of La-doped Galfenol for next-generation magnetostriction based energy-efficient devices.

  • Low-damping spin dynamics in thin sputtered FeGa films for strain-mediated spintronics

    by Madeleine Ghobar, Cynthia Bou Karroum, Matthieu Liparo, Aletta R. E. Prinsloo, Charles J. Sheppard, Gaëlle Simon, Jérôme Robert, Nolwenn Le Breton, Alain Fessant, Jean-Philippe Jay, et al.

    We report on the dynamic and quasistatic magnetic properties of ultrathin sputtered Ta/Fe81Ga19/glass thin films without buffer layers or post-deposition annealing. Ferromagnetic resonance measurements reveal a narrow peak-to-peak linewidth of 10.3±0.3 mT at 9.86 GHz, corresponding to an upper-bound Gilbert damping parameter of 2.5×10−2. These films also exhibit low coercivity in the range of 3–6 mT, confirming their soft magnetic character. Angular-dependent measurements indicate a predominantly twofold symmetry in the resonance field, while magnetization reversal displays a fourfold behavior. The origin of this discrepancy between dynamic and quasistatic anisotropies remains unclear and calls for further investigation. These results establish sputtered FeGa as a promising rare-earth-free magnetostrictive material combining strong magnetoelastic coupling with low-loss spin dynamics.

  • The magnetocaloric effect of exchange anisotropy

    by David T. Dekadjevi, Jamal Ben Youssef, Souren P. Pogossian, David Spenato, Alexandra Suvorova, André M. Strydom, Aletta R. E. Prinsloo

    The magnetocaloric effect is a temperature change in magnetic materials when subjected to applied magnetic field variations. An inverse magnetocaloric effect occurs when applying a magnetic field adiabatically leads to sample cooling instead of heating. In the present study, we report on the inverse magnetocaloric effect in unidirectional ferromagnetic nanoparticles, demonstrating that this phenomenon can be controlled through interfacial exchange coupling at the nanoscale and within a moderate external field. The present results show that crystalline Ni80Fe20 nanoparticles diluted in an amorphous Al2O3 matrix exhibit the rich phenomena of coercive enhancement, hysteresis shifts, and training effects associated with the exchange anisotropy. The entropy changes are determined by this anisotropy.

  • Open Access

    Rare earth trace element doping of extrinsic multiferroics for an energy efficient remote control of magnetic properties

    by Matthieu Liparo, Jean-Philippe Jay, Bohdan Kundys, Gaëlle Simon, Alain Fessant, Yann Le Grand, Charles J. Sheppard, Aletta R. E. Prinsloo, David Spenato, David T. Dekadjevi

    Developing functional materials for optical remote control of magnetism can lead to faster, more efficient wireless data storage and sensing devices. In terms of desired material properties, this development requires the combined optimization of elastic interactions, low magnetic coercivity, and a narrow linewidth of ferromagnetic resonance to establish low-loss dynamic functionalities. A general pathway to achieve these requirements is still lacking. Here, we demonstrate that rare-earth trace element doping of an extrinsic multiferroic promotes strain mediated energy efficient remote control of static and dynamic magnetic properties induced by non-pulsed visible light. The strain under illumination arises from the photostrictive property of the ferroelectric substrate whereas the magnetism control originates from the enhanced magnetostrictive property of a rare-earth trace element doped ferromagnetic thin film. Combining the light-strain-magnetic interaction in the rare-earth doped extrinsic multiferroic provides a general approach for enhanced photo-magnetic elastic control extendable to optically tunable magnetic devices.


  • Open Access

    Static and dynamic magnetization control of extrinsic multiferroics by the converse magneto-photostrictive effect

    by Matthieu Liparo, Jean-Philippe Jay, Matthieu Dubreuil, Gaëlle Simon, Alain Fessant, Walaa Jahjah, Yann Le Grand, Charles Sheppard, Aletta R. E. Prinsloo, Vincent Vlaminck, et al.

    Using strain to control magnetic properties through anisotropy changes is a method to create functional materials with energy efficient applications. The strain can be inferred remotely by the light-induced non-thermal dimension change of materials named the photostrictive effect. Still, the control of dynamic magnetic properties via this effect is pursued. The need of a physical quantity to encompass and to describe anisotropic magnetization changes under the photostrictive effect is also remaining. Here, the photostrictive effect with visible light is used to engineer static and dynamic magnetic properties in a multiferroic material. A converse magneto-photostrictive coupling coefficient is also proposed as a physical quantity to assess anisotropic magnetization changes under this effect. These results provide a path towards understanding light-induced magnetization changes and a potential to be used in wireless approaches for the control of magnetic properties and tunable RF/microwave devices.


  • Open Access

    Static and dynamic magnetization control of extrinsic multiferroics by the converse magneto-photostrictive effect.

    by David Dekadjevi, Liparo Matthieu, Jean-Philippe Jay, Matthieu Dubreuil, Gaelle Simon, Alain Fessant, Walaa Jahjah, Yann Le Grand, Charles Sheppard, Aletta Prinsloo, et al.

    In this work, photostrictive manipulations of static and dynamic magnetic properties are demonstrated in an extrinsic multiferroic composite. The photostriction is achieved with visible light in the blue region of the spectrum. The composites consist of 5 nm or 10 nm magnetostrictive Fe$_{81}$Ga$_{19}$ thin films coupled to a piezoelectric (011)-Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_3$-Pb(Zr,Ti)O$_3$ substrate. Angular dependent magnetization reversals properties are largely enhanced or reduced under a converse magneto-photostrictive effect (CMPE). The CMPE strength is analysed with a novel coefficient named the converse magneto-photostrictive coupling coefficient. This coefficient is proposed as a general approach to analyse and to compare different extrinsic multiferroics under the converse magneto-photostrictive effect. Its thickness dependence reveals that the CMPE strength decreases with an increase of the Fe$_{81}$Ga$_{19}$ thickness. Experimental evidence for a control of dynamic magnetic properties under CMPE is then revealed by ferromagnetic resonance measurements. Resonant fields are shifted under CMPE, whereas their linewidths remain constant. Furthermore, resonant field shifts can be either positive or negative depending on the in-plane angle. The largest shift under CMPE of +5.7~\% is obtained for the 5~nm sample. Our study shows that the CMPE provides an efficient approach for a control of not only the static but also the dynamic magnetic properties in extrinsic multiferroics.

  • Open Access

    Static and dynamic magnetization control of extrinsic multiferroics by the converse magneto-photostrictive effect

    by Matthieu Liparo, Jean-Philippe Jay, Matthieu Dubreuil, Gaëlle Simon, Alain Fessant, Walaa Jahjah, Yann Le Grand, Charles Sheppard, Aletta R. E. Prinsloo, Vincent Vlaminck, et al.

    In this work, photostrictive manipulations of static and dynamic magnetic properties are demonstrated in an extrinsic multiferroic composite. The photostriction is achieved with visible light in the blue region of the spectrum. The composites consist of 5 nm or 10 nm magnetostrictive Fe$_{81}$Ga$_{19}$ thin films coupled to a piezoelectric (011)-Pb(Mg$_{1/3}$Nb$_{2/3}$)O$_3$-Pb(Zr,Ti)O$_3$ substrate. Angular dependent magnetization reversals properties are largely enhanced or reduced under a converse magneto-photostrictive effect (CMPE). The CMPE strength is analysed with a novel coefficient named the converse magneto-photostrictive coupling coefficient. This coefficient is proposed as a general approach to analyse and to compare different extrinsic multiferroics under the converse magneto-photostrictive effect. Its thickness dependence reveals that the CMPE strength decreases with an increase of the Fe$_{81}$Ga$_{19}$ thickness. Experimental evidence for a control of dynamic magnetic properties under CMPE is then revealed by ferromagnetic resonance measurements. Resonant fields are shifted under CMPE, whereas their linewidths remain constant. Furthermore, resonant field shifts can be either positive or negative depending on the in-plane angle. The largest shift under CMPE of +5.7 % is obtained for the 5 nm sample. Our study shows that the CMPE provides an efficient approach for a control of not only the static but also the dynamic magnetic properties in extrinsic multiferroics.

  • Magnetization Reversals of Fe81Ga19 -Based Flexible Thin Films Under Multiaxial Mechanical Stress

    by F. Legall, C. Morice, W. Jahjah, A. Bivic, N. Ryon, J. Richy, A.R.E. Prinsloo, C.J. Sheppard, A. Fessant, J.-Ph. Jay, et al.

    The effect of multiaxial mechanical stress on angle-dependent magnetization reversals is studied on a single 10-nm Ni80Fe20 film, a single 10-nm Fe81Ga19 film, and a Ni80Fe20(10 nm)/Fe81Ga19(10 nm) bilayer. These films are grown on flexible Al “kitchenlike” foils. These flexible foils are bent on two convex optical lenses to apply multiaxial mechanical stresses of different magnitudes. In order to understand the mechanisms driving the physical properties of the flexible systems, the magnetic films are also grown on hard native-oxide-covered Si(100) substrates. By probing the angular dependence of the coercive field and the remanent magnetization, we show that the Ni80Fe20 single layer and the Ni80Fe20/Fe81Ga19 bilayer grown on Si present a uniaxial anisotropy. Along their easy axis, their domain structure at the coercive field exhibits large domains with sawtooth domain walls. However, the Fe81Ga19 layer grown on Si shows a cubic anisotropy and sharp domain walls with a right-angle geometry along its easy axis. All layers grown on Al foils show development or enhancement of a uniaxial anisotropy arising from the Al surface morphology. Multiaxial mechanical stress applied to the flexible Al foils results in very different nonreversible effects as a function of the composition of the layered system. For Ni80Fe20, multiaxial mechanical stress has no effect, as expected for a nonmagnetostrictive system. For Fe81Ga19, it results in a full in-plane randomization of its magnetization-reversal properties. For the bilayer, multiaxial mechanical stress does not fully randomize the in-plane magnetization-reversal properties: the bilayer retains a uniaxial character.


  • Open Access

    Thermal simulation of magnetization reversals for a size-distributed assembly of nanoparticles with uniaxial and cubic anisotropies

    by N. Ryon, J. Richy, C. J. Sheppard, A. R. E. Prinsloo, A. Fessant, J.-Ph. Jay, D. Spenato, D. T. Dekadjevi

    A temperature-dependent coherent magnetization reversal model is proposed for size-distributed assemblies of ferromagnetic nanoparticles (NPs). NPs are assumed to be of uniaxial and cubic anisotropies. The thermal dependence is included by considering thermal fluctuations, implemented through the Néel-Arrhenius theory. Theoretically calculated thermal and angular dependences of magnetization reversal loops are obtained. There are similar behaviors for a single NP and an assembly of NPs. In particular, it is shown that the fourfold anisotropy results in double slope loops along the hard axis in both cases. Also, the azimuthal dependence of coercive fields is similar in both cases and with or without the presence of a fourfold anisotropy. There are also important differences in the behaviors observed for a single NP and that of an assembly of NPs. Firstly, the blocking temperature is barely enhanced by the presence of a fourfold anisotropy but is greatly enhanced in the assembly of NPs relative to a single NP. Secondly, along the easy axis, for a single size particle, the shape of the M-H loops is neither temperature dependent nor fourfold anisotropy dependent, as it is always rectangular. However, the shape of the M-H loops for an assembly of NPs is temperature dependent, but this shape is weakly dependent on the anisotropy ratio. Simulations of M-H loops using the model presented here would allow the quantitative determination of the anisotropy constants for either single sized NPs or an assembly with different sizes.


  • Influence of mesoporous or parasitic BiFeO3 structural state on the magnetization reversal in multiferroic BiFeO3/Ni81Fe19 polycrystalline bilayers

    by W. Jahjah, J.-Ph. Jay, Y. Le Grand, A. Fessant, J. Richy, C. Marcelot, B. Warot-Fonrose, A. R. E. Prinsloo, C. J. Sheppard, D. T. Dekadjevi, et al.

    Coupled ferromagnetic and antiferromagnetic bilayers are an important class of materials that allow manipulating magnetic properties, including the interfacial exchange bias phenomenon. Bismuth ferrite, BiFeO 3 , is the most studied single-phase magnetoelectric multiferroic due to its unique ferroelectric and antiferromagnetic orderings well above room temperature. We report on a systematic experimental study regarding the direct correlation between the Bi 2 O 3 parasitic phase concentration in the BiFeO 3 and the magnetic properties of the polycrystalline heterostructure BiFeO 3 /Ni 81 Fe 19 deposited via magnetron sputtering. It was found that the macroscopic exchange field, that arises from exchange bias coupling, is zero for phase-pure BiFeO 3 and increases up to 18 Oe on increasing the concentration of Bi 2 O 3 . This trend is in agreement with the azimuthal behavior of the magnetization reversal. The structural characterization also indicates that phase-pure BiFeO 3 has a disordered mesoporous structure. The influence of the Bi 2 O 3 parasitic phase and mesoporous state, that is known to exist and introduce defects in the polycrystalline bilayers of BiFeO 3 /Ni 81 Fe 19 , on the magnetization reversal and exchange bias coupling is reported for the first time in this study.